Skip to content

O
OpenXG-RAN
Commit b3d45cf6 authored by Jaroslava Fiedlerova's avatar Jaroslava Fiedlerova
Browse files
Options

CI: Add test with 4 DL layers, 60 MHz BW to SA-2x2 pipeline

parent 220d851d
Hide whitespace changes
Inline Side-by-side
Showing with 435 additions and 0 deletions
ci-scripts/conf_files/gnb.sa.band77.162prb.usrpn310.4x4.conf 0 → 100644
View file @ b3d45cf6
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
sa = 1;
usrp-tx-thread-config = 1;
tune-offset = 30720000;
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 208; mnc = 97; mnc_length = 2; snssaiList = ({ sst = 1; }) });
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 2;
pusch_AntennaPorts = 4;
pdsch_AntennaPorts_N1 = 2;
maxMIMO_layers = 4;
do_CSIRS = 1;
do_SRS = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.60 MHz + 81*12*30e-3 MHz = 3329.76
absoluteFrequencySSB = 673344;
# this is 3300.60 MHz
dl_absoluteFrequencyPointA = 671400;
dl_frequencyBand = 77;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 162;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 31624;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 77;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 162;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 31624;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -70;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 5;
nrofDownlinkSlots = 3;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 1;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "192.168.61.132"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.61.129/26";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.61.129/26";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 250;
pucch_TargetSNRx10 = 250;
ulsch_max_frame_inactivity = 0;
pusch_FailureThres = 100;
ul_max_mcs = 28;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pusch_dtx_threshold = 20;
max_ldpc_iterations = 10;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 4;
nb_rx = 4;
att_tx = 0;
att_rx = 0;
bands = [77];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000, 0x00007fff, 0x0000];
#clock_src = "internal";
sdr_addrs = "addr=192.168.80.53, clock_source=internal,time_source=internal"
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea1", "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia1", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "yes";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};
ci-scripts/xml_files/container_sa_n310_4X4_60MHz_quectel.xml 0 → 100644
View file @ b3d45cf6
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>TEST-SA-FR1-N310-4x4-60MHz</htmlTabRef>
<htmlTabName>60 MHz 4x4 TDD SA</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
100000
111111
010010
800813
030101
010001
050001
071000
071001
070002
010010
000001
030201
200000
333333
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="111111">
<class>Pull_Cluster_Image</class>
<desc>Pull Images from Cluster</desc>
<images_to_pull>oai-gnb</images_to_pull>
<test_svr_id>matix</test_svr_id>
</testCase>
<testCase id="100000">
<class>Custom_Command</class>
<desc>Disable Sleep States</desc>
<node>matix</node>
<command>sudo cpupower idle-set -D 0</command>
</testCase>
<testCase id="200000">
<class>Custom_Command</class>
<always_exec>true</always_exec>
<desc>Enable Sleep States</desc>
<node>matix</node>
<command>sudo cpupower idle-set -E</command>
</testCase>
<testCase id="010001">
<class>Attach_UE</class>
<desc>Attach UE</desc>
<id>up2</id>
</testCase>
<testCase id="010010">
<class>Detach_UE</class>
<always_exec>true</always_exec>
<desc>Detach UE</desc>
<id>up2</id>
</testCase>
<testCase id="800813">
<class>Create_Workspace</class>
<desc>Create new Workspace</desc>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="030101">
<class>Deploy_Object</class>
<desc>Deploy gNB (TDD/Band77/60MHz/N310) in a container</desc>
<yaml_path>ci-scripts/yaml_files/5g_sa_n310_4x4_60MHz</yaml_path>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="000001">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
</testCase>
<testCase id="000002">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
</testCase>
<testCase id="050001">
<class>Ping</class>
<desc>Ping: 100pings in 20sec</desc>
<id>up2</id>
<ping_args>-c 100 -i 0.2 %cn_ip%</ping_args>
<ping_packetloss_threshold>1</ping_packetloss_threshold>
<ping_rttavg_threshold>15</ping_rttavg_threshold>
</testCase>
<testCase id="071000">
<class>Iperf</class>
<desc>iperf (DL/480Mbps/UDP)(30 sec)(single-ue profile)</desc>
<iperf_args>-u -b 480M -t 30 -R</iperf_args>
<svr_id>matix-cn5g</svr_id>
<id>up2</id>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
</testCase>
<testCase id="071001">
<class>Iperf</class>
<desc>iperf (UL/120Mbps/UDP)(30 sec)(single-ue profile)</desc>
<iperf_args>-u -b 120M -t 30</iperf_args>
<svr_id>matix-cn5g</svr_id>
<id>up2</id>
<iperf_packetloss_threshold>10</iperf_packetloss_threshold>
<iperf_bitrate_threshold>70</iperf_bitrate_threshold>
</testCase>
<testCase id="070002">
<class>Iperf</class>
<desc>iperf (BIDIR TCP)(30 sec)(single-ue profile)</desc>
<iperf_args>-t 30 --bidir</iperf_args>
<svr_id>matix-cn5g</svr_id>
<id>up2</id>
</testCase>
<testCase id="030201">
<class>Undeploy_Object</class>
<always_exec>true</always_exec>
<desc>Undeploy gNB</desc>
<yaml_path>ci-scripts/yaml_files/5g_sa_n310_4x4_60MHz</yaml_path>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<services>oai-gnb</services>
<d_retx_th>10,100,100,100</d_retx_th>
<u_retx_th>10,100,100,100</u_retx_th>
</testCase>
<testCase id="333333">
<class>Clean_Test_Server_Images</class>
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
<test_svr_id>0</test_svr_id>
</testCase>
</testCaseList>
ci-scripts/yaml_files/5g_sa_n310_4x4_60MHz/docker-compose.yml 0 → 100644
View file @ b3d45cf6
services:
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
network_mode: "host"
container_name: oai-gnb
cap_drop:
- ALL
cap_add:
- SYS_NICE
- IPC_LOCK
environment:
TZ: Europe/Paris
USE_ADDITIONAL_OPTIONS: --log_config.global_log_options level,nocolor,time
volumes:
- ../../conf_files/gnb.sa.band77.162prb.usrpn310.4x4.conf:/opt/oai-gnb/etc/gnb.conf
healthcheck:
test: /bin/bash -c "pgrep nr-softmodem"
interval: 10s
timeout: 5s
retries: 5
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment