Skip to content

O
OpenXG-RAN
Commit eb159509 authored by Sagar Parsawar's avatar Sagar Parsawar
Browse files
Options

Merge branch 'nr_prs' of https://gitlab.eurecom.fr/oai/openairinterface5g into nr_prs

parents 0fcf8d9c c4caff79
Hide whitespace changes
Inline Side-by-side
Showing with 299 additions and 15 deletions
executables/nr-ru.c
View file @ eb159509
......@@ -982,10 +982,24 @@ void fill_rf_config(RU_t *ru, char *rf_config_file) {
}
} else if (mu == NR_MU_3) {
switch(N_RB) {
case 66:
case 132:
if (fp->threequarter_fs) {
cfg->sample_rate=184.32e6;
cfg->samples_per_frame = 1843200;
cfg->tx_bw = 200e6;
cfg->rx_bw = 200e6;
} else {
cfg->sample_rate = 245.76e6;
cfg->samples_per_frame = 2457600;
cfg->tx_bw = 200e6;
cfg->rx_bw = 200e6;
}
break;
case 66:
if (fp->threequarter_fs) {
cfg->sample_rate=92.16e6;
cfg->samples_per_frame = 921600;
cfg->tx_bw = 100e6;
cfg->rx_bw = 100e6;
} else {
......@@ -999,8 +1013,8 @@ void fill_rf_config(RU_t *ru, char *rf_config_file) {
case 32:
if (fp->threequarter_fs) {
cfg->sample_rate=92.16e6;
cfg->samples_per_frame = 921600;
cfg->sample_rate=46.08e6;
cfg->samples_per_frame = 460800;
cfg->tx_bw = 50e6;
cfg->rx_bw = 50e6;
} else {
......
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
View file @ eb159509
......@@ -1109,6 +1109,12 @@ extern "C" {
LOG_I(HW,"%s() sample_rate:%u\n", __FUNCTION__, (int)openair0_cfg[0].sample_rate);
switch ((int)openair0_cfg[0].sample_rate) {
case 184320000:
// from usrp_time_offset
//openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 15; //to be checked
break;
case 122880000:
// from usrp_time_offset
//openair0_cfg[0].samples_per_packet = 2048;
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band257.tm1.132PRB.usrpn300.conf 0 → 100644
View file @ eb159509
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
tr_s_preference = "local_mac"
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is pointA + 23 PRBs@120kHz SCS (same as initial BWP)
absoluteFrequencySSB = 2078315;
dl_frequencyBand = 257;
# this is 27.900 GHz
dl_absoluteFrequencyPointA = 2077499;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 3;
dl_carrierBandwidth = 132;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=50 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 13475;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 3;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 257;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 3;
ul_carrierBandwidth = 132;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 13475;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 3;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 3;
ssb_PositionsInBurst_Bitmap = 0x0001000100010001L;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 3;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 3;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 3;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2 ;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
thread_pool_size = 8;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
sdr_addrs = "addr=192.168.30.2";
if_freq = 1L;
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band257.tm1.32PRB.usrpn300.conf
View file @ eb159509
......@@ -173,7 +173,7 @@ gNBs =
);
///X2
enable_x2 = "yes";
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
......@@ -229,10 +229,10 @@ RUs = (
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2";
sdr_addrs = "addr=192.168.30.2";
if_freq = 5124520000L;
clock_src = "external";
time_src = "external";
clock_src = "internal";
time_src = "internal";
}
);
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band257.tm1.66PRB.usrpn300.conf
View file @ eb159509
......@@ -121,7 +121,7 @@ gNBs =
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 3;
ssb_PositionsInBurst_Bitmap = 1;
ssb_PositionsInBurst_Bitmap = 0x0001000100010001L;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
......@@ -139,15 +139,15 @@ gNBs =
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
referenceSubcarrierSpacing = 3;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 30;
nrofDownlinkSymbols = 0;
nrofUplinkSlots = 10;
nrofUplinkSymbols = 0;
dl_UL_TransmissionPeriodicity = 3;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2 ;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
......@@ -212,7 +212,8 @@ RUs = (
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
sdr_addrs = "type=n300";
sdr_addrs = "addr=192.168.30.2";
if_freq = 1L;
}
);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment