Add and harmonize configuration files for 5, 10, 40 MHz FDD with USRP X300

targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band66.tm1.106PRB.usrpx300.conf

@@ -102,11 +102,11 @@ gNBs =
         prach_RootSequenceIndex                                     = 1;
         # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
         #
-        msg1_SubcarrierSpacing                                      = 1,
+        msg1_SubcarrierSpacing                                      = 1;
 
 # restrictedSetConfig
 # 0=unrestricted, 1=restricted type A, 2=restricted type B
-        restrictedSetConfig                                         = 0,
+        restrictedSetConfig                                         = 0;
 
         msg3_DeltaPreamble                                          = 1;
         p0_NominalWithGrant                                         =-90;
@@ -206,7 +206,7 @@ RUs = (
          ## beamforming 4x4 matrix:
          #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
          sdr_addrs = "type=x300";
-         clock_src = "external";
+         clock_src = "internal";
          # if_freq = 3700000000L;
          # if_offset = 1000000;
     }
@@ -217,7 +217,7 @@ THREAD_STRUCT = (
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
     parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
+    worker_config      = "WORKER_DISABLE";
   }
 );
 

targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band66.tm1.24PRB.usrpx300.conf

+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
+
+    tr_s_preference     = "local_mac";
+
+    ////////// Physical parameters:
+
+    min_rxtxtime                                              = 6;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 2150 MHz + 12 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 430864;
+      dl_frequencyBand                                                 = 66;
+      # this is 2150 MHz
+      dl_absoluteFrequencyPointA                                       = 430000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 24;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=0,L=24 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 6325;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 0;
+        initialDLBWPsearchSpaceZero                                             = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 66;
+      ul_absoluteFrequencyPointA                                       = 350000;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 24;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 6325;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1;
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0;
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+  }
+);
+
+MACRLCs = (
+    {
+        num_cc = 1;
+        tr_s_preference = "local_L1";
+        tr_n_preference = "local_RRC";
+    }
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference = "local_mac";
+  thread_pool_size = 8;
+  ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
+}
+);
+
+RUs = (
+    {
+         local_rf       = "yes";
+         nb_tx          = 1;
+         nb_rx          = 1;
+         att_tx         = 0;
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 114;
+         eNB_instances  = [0];
+         ## beamforming 1x2 matrix: 1 layer x 2 antennas
+         bf_weights = [0x00007fff, 0x0000];
+         ## beamforming 1x4 matrix: 1 layer x 4 antennas
+         #bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
+         ## beamforming 2x2 matrix:
+         #bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
+         ## beamforming 4x4 matrix:
+         #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
+         sdr_addrs = "type=x300";
+         clock_src = "internal";
+         # if_freq = 3700000000L;
+         # if_offset = 1000000;
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_DISABLE";
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       hw_log_level                          ="info";
+       phy_log_level                         ="info";
+       mac_log_level                         ="info";
+       rlc_log_level                         ="info";
+       pdcp_log_level                        ="info";
+       rrc_log_level                         ="info";
+    };
+

targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band66.tm1.25PRB.usrpx300.conf

@@ -190,7 +190,7 @@ RUs = (
          nb_tx          = 1;
          nb_rx          = 1;
          att_tx         = 0;
-         att_rx         = 10;
+         att_rx         = 0;
          bands          = [7];
          max_pdschReferenceSignalPower = -27;
          max_rxgain                    = 114;
@@ -204,7 +204,7 @@ RUs = (
          ## beamforming 4x4 matrix:
          #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
          sdr_addrs = "type=x300";
-         clock_src = "external";
+         clock_src = "internal";
          # if_freq = 3700000000L;
          # if_offset = 1000000;
     }