del buptvppe

src/Buptvppe/1

-unix {
-  nodaemon
-  log /var/log/upf/vpp/vpp.log
-  full-coredump
-  gid vpp
-  interactive
-  cli-listen /run/vpp/cli.sock
-  #cli-listen localhost:5002
-  #exec @/work/gtpu_ext/vpp_0618/config_system.sh@
-  #exec upf_gateway.sh
-  #exec /work/gtpu_ext/upf_v0.4/upf-vpp/conf/config_system.sh
-  exec  test_iperf3.sh
-  logsize 100
-}
-#
-api-trace {
-   on
-  #save-api-table /tmp/save_api_table
-}
-
-api-segment {
-   gid vpp
-}
-
-#
-cpu {
-	## In the VPP there is one main thread and optionally the user can create worker(s)
-	## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
-
-	## Manual pinning of thread(s) to CPU core(s)
-
-	## Set logical CPU core where main thread runs, if main core is not set
-	## VPP will use core 1 if available
-	main-core 3
-
-        ## Set logical CPU core(s) where worker threads are running  
-        #corelist-workers 4-6
-        
-        #corelist-io 5,6
-
-	## Automatic pinning of thread(s) to CPU core(s)
-
-	## Sets number of CPU core(s) to be skipped (1 ... N-1)
-	## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
-	## The main thread is automatically pinned to the first available CPU core and worker(s)
-	## are pinned to next free CPU core(s) after core assigned to main thread
-	# skip-cores 4
-
-	## Specify a number of workers to be created
-	## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
-	## and main thread's CPU core
-	#workers 2
-
-	## Set scheduling policy and priority of main and worker threads
-
-	## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
-	## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
-	scheduler-policy fifo
-
-	## Scheduling priority is used only for "real-time policies (fifo and rr),
-	## and has to be in the range of priorities supported for a particular policy
-	scheduler-priority 50
-}
-
-#buffers {
-	## Increase number of buffers allocated, needed only in scenarios with
-	## large number of interfaces and worker threads. Value is per numa node.
-	## Default is 16384 (8192 if running unpriviledged)
- #   buffers-per-numa 128000
-
-	## Size of buffer data area
-	## Default is 2048
-#	default data-size 20480
-# }
-dpdk {
-	## Change default settings for all interfaces
-	dev default {
-		## Number of receive queues, enables RSS
-		## Default is 1
-		num-rx-queues 1
-
-		## Number of transmit queues, Default is equal
-		## to number of worker threads or 1 if no workers treads
-		num-tx-queues 1
-
-		## Number of descriptors in transmit and receive rings
-		## increasing or reducing number can impact performance
-		## Default is 1024 for both rx and tx
-		# num-rx-desc 512
-		# num-tx-desc 512
-
-		## VLAN strip offload mode for interface
-		## Default is off
-		# vlan-strip-offload on
-	}
-
-	## Whitelist specific interface by specifying PCI address
-	
-        #82576 1Gg
-
-        dev  0000:06:00.0
-        dev  0000:06:00.1
-
-        #dev 0000:05:00.1
-
- 	## Whitelist specific interface by specifying PCI address and in
-	## addition specify custom parameters for this interface
-	# dev 0000:02:00.1 {
-	#	num-rx-queues 2
-	# }
-
-	## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci,
-	## uio_pci_generic or auto (default)
-	# uio-driver vfio-pci
-	uio-driver igb_uio
-
-	## Disable multi-segment buffers, improves performance but
-	## disables Jumbo MTU support
-	#no-multi-seg
-
-	## Change hugepages allocation per-socket, needed only if there is need for
-	## larger number of mbufs. Default is 256M on each detected CPU socket
-	socket-mem 2048,2048
-
-	## Disables UDP / TCP TX checksum offload. Typically needed for use
-	## faster vector PMDs (together with no-multi-seg)	
-        #no-tx-checksum-offload
-}
-
-plugins {
-    path   /work/gtpu_ext/upf_v0.4/upf-vpp/src/Buptvppe/build-root/install-vpp_debug-native/vpp/lib/vpp_plugins/
-    plugin dpdk_plugin.so { enable }
-    plugin gtpu_plugin.so { enable }
-    plugin upf_plugin.so  { enable }
-}

src/Buptvppe/INFO.yaml

----
-project: 'vpp'
-project_creation_date: '2015-12-08'
-project_category: ''
-lifecycle_state: 'Incubation'
-project_lead: &vpp_ptl
-    name: 'Dave Barach'
-    email: 'openvpp@barachs.net'
-    id: 'dbarach'
-    company: ''
-    timezone: ''
-primary_contact: *vpp_ptl
-issue_tracking:
-    type: 'jira'
-    url: 'https://jira.fd.io/projects/vpp'
-    key: 'VPP'
-mailing_list:
-    type: 'groups.io'
-    url: 'https://lists.fd.io/g/vpp-dev'
-    tag: '<[sub-project_name]>'
-realtime_discussion:
-    type: 'irc'
-    server: 'freenode.net'
-    channel: 'fdio-vpp'
-meetings:
-    - type: 'zoom'
-      agenda: 'n/a'
-      url: 'https://wiki.fd.io/view/VPP/Meeting'
-      server: 'n/a'
-      channel: 'fdio-vpp'
-      repeats: 'weekly'
-      time: '08:00 PT'
-repositories:
-    - 'vpp'
-committers:
-    - <<: *vpp_ptl
-    - name: 'Keith Burns'
-      company: 'gmail'
-      email: 'alagalah@gmail.com'
-      id: 'alagalah'
-      timezone: ''
-    - name: 'Chris Luke'
-      company: 'comcast'
-      email: 'chris_luke@comcast.com'
-      id: 'chrisluke'
-      timezone: ''
-    - name: 'Dave Barach'
-      company: 'barachs'
-      email: 'openvpp@barachs.net'
-      id: 'dbarach'
-      timezone: ''
-    - name: 'Damjan Marion'
-      company: 'cisco'
-      email: 'damarion@cisco.com'
-      id: 'dmarion'
-      timezone: ''
-    - name: 'Dave Wallace'
-      company: 'gmail'
-      email: 'dwallacelf@gmail.com'
-      id: 'dwallacelf'
-      timezone: ''
-    - name: 'Florin Coras'
-      company: 'gmail'
-      email: 'florin.coras@gmail.com'
-      id: 'florin.coras'
-      timezone: ''
-    - name: 'Ed Warnicke'
-      company: 'gmail'
-      email: 'hagbard@gmail.com'
-      id: 'hagbard'
-      timezone: ''
-    - name: 'John Lo'
-      company: 'cisco'
-      email: 'loj@cisco.com'
-      id: 'lojohn'
-      timezone: ''
-    - name: 'Marco Varlese'
-      company: 'suse'
-      email: 'marco.varlese@suse.de'
-      id: 'marco.varlese'
-      timezone: ''
-    - name: 'Neale Ranns'
-      company: 'cisco'
-      email: 'nranns@cisco.com'
-      id: 'nranns'
-      timezone: ''
-    - name: 'Ole Trøan'
-      company: 'employees'
-      email: 'otroan@employees.org'
-      id: 'otroan'
-      timezone: ''
-    - name: 'Sergio Gonzalez Monroy'
-      company: 'outlook'
-      email: 'sergio.gonzalez.monroy@outlook.com'
-      id: 'smonroy'
-      timezone: ''
-tsc:
-    # yamllint disable rule:line-length
-    approval: ''
-    changes:
-        - type: 'removal'
-          name: ''
-          link: ''
-        - type: 'promotion'
-          name: ''
-          link: ''

src/Buptvppe/README-VPP.md

-Vector Packet Processing
-========================
-
-## Introduction
-
-The VPP platform is an extensible framework that provides out-of-the-box
-production quality switch/router functionality. It is the open source version
-of Cisco's Vector Packet Processing (VPP) technology: a high performance,
-packet-processing stack that can run on commodity CPUs.
-
-The benefits of this implementation of VPP are its high performance, proven
-technology, its modularity and flexibility, and rich feature set.
-
-For more information on VPP and its features please visit the
-[FD.io website](http://fd.io/) and
-[What is VPP?](https://wiki.fd.io/view/VPP/What_is_VPP%3F) pages.
-
-
-## Changes
-
-Details of the changes leading up to this version of VPP can be found under
-@ref release_notes.
-
-
-## Directory layout
-
-| Directory name         | Description                                 |
-| ---------------------- | ------------------------------------------- |
-|      build-data        | Build metadata                              |
-|      build-root        | Build output directory                      |
-|      doxygen           | Documentation generator configuration       |
-|      dpdk              | DPDK patches and build infrastructure       |
-| @ref extras/libmemif   | Client library for memif                    |
-| @ref src/examples      | VPP example code                            |
-| @ref src/plugins       | VPP bundled plugins directory               |
-| @ref src/svm           | Shared virtual memory allocation library    |
-|      src/tests         | Standalone tests (not part of test harness) |
-|      src/vat           | VPP API test program                        |
-| @ref src/vlib          | VPP application library                     |
-| @ref src/vlibapi       | VPP API library                             |
-| @ref src/vlibmemory    | VPP Memory management                       |
-| @ref src/vnet          | VPP networking                              |
-| @ref src/vpp           | VPP application                             |
-| @ref src/vpp-api       | VPP application API bindings                |
-| @ref src/vppinfra      | VPP core library                            |
-| @ref src/vpp/api       | Not-yet-relocated API bindings              |
-|      test              | Unit tests and Python test harness          |
-
-## Getting started
-
-In general anyone interested in building, developing or running VPP should
-consult the [VPP wiki](https://wiki.fd.io/view/VPP) for more complete
-documentation.
-
-In particular, readers are recommended to take a look at [Pulling, Building,
-Running, Hacking, Pushing](https://wiki.fd.io/view/VPP/Pulling,_Building,_Run
-ning,_Hacking_and_Pushing_VPP_Code) which provides extensive step-by-step
-coverage of the topic.
-
-For the impatient, some salient information is distilled below.
-
-
-### Quick-start: On an existing Linux host
-
-To install system dependencies, build VPP and then install it, simply run the
-build script. This should be performed a non-privileged user with `sudo`
-access from the project base directory:
-
-    ./extras/vagrant/build.sh
-
-If you want a more fine-grained approach because you intend to do some
-development work, the `Makefile` in the root directory of the source tree
-provides several convenience shortcuts as `make` targets that may be of
-interest. To see the available targets run:
-
-    make
-
-
-### Quick-start: Vagrant
-
-The directory `extras/vagrant` contains a `VagrantFile` and supporting
-scripts to bootstrap a working VPP inside a Vagrant-managed Virtual Machine.
-This VM can then be used to test concepts with VPP or as a development
-platform to extend VPP. Some obvious caveats apply when using a VM for VPP
-since its performance will never match that of bare metal; if your work is
-timing or performance sensitive, consider using bare metal in addition or
-instead of the VM.
-
-For this to work you will need a working installation of Vagrant. Instructions
-for this can be found [on the Setting up Vagrant wiki page]
-(https://wiki.fd.io/view/DEV/Setting_Up_Vagrant).
-
-
-## More information
-
-Several modules provide documentation, see @subpage user_doc for more
-end-user-oriented information. Also see @subpage dev_doc for developer notes.
-
-Visit the [VPP wiki](https://wiki.fd.io/view/VPP) for details on more
-advanced building strategies and other development notes.
-
-
-## Test Framework
-
-There is PyDoc generated documentation available for the VPP test framework.
-See @ref test_framework_doc for details.

src/Buptvppe/README.md

-src/plugins/upf/README.md
\ No newline at end of file

src/Buptvppe/build-data/packages/build.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.

src/Buptvppe/build-data/packages/external.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-external_source = build
-
-ifneq (,$(findstring debug,$(TAG)))
-	DPDK_DEBUG=y
-else
-	DPDK_DEBUG=n
-endif
-
-DPDK_MAKE_ARGS = -C $(call find_source_fn,$(PACKAGE_SOURCE)) \
-	BUILD_DIR=$(PACKAGE_BUILD_DIR) \
-	INSTALL_DIR=$(PACKAGE_INSTALL_DIR) \
-	DPDK_DEBUG=$(DPDK_DEBUG)
-
-DPDK_MLX5_PMD=$(strip $($(PLATFORM)_uses_dpdk_mlx5_pmd))
-ifneq ($(DPDK_MLX5_PMD),)
-DPDK_MAKE_ARGS += DPDK_MLX5_PMD=y
-endif
-
-DPDK_MLX_IBVERBS_DLOPEN=$(strip $($(PLATFORM)_uses_dpdk_ibverbs_link_dlopen))
-ifneq ($(DPDK_MLX_IBVERBS_DLOPEN),)
-DPDK_MAKE_ARGS += DPDK_MLX_IBVERBS_DLOPEN=y
-endif
-
-DPDK_MLX4_PMD=$(strip $($(PLATFORM)_uses_dpdk_mlx4_pmd))
-ifneq ($(DPDK_MLX4_PMD),)
-DPDK_MAKE_ARGS += DPDK_MLX4_PMD=y
-endif
-
-DPDK_PLATFORM_TARGET=$(strip $($(PLATFORM)_dpdk_target))
-ifneq ($(DPDK_PLATFORM_TARGET),)
-DPDK_MAKE_ARGS += DPDK_TARGET=$(DPDK_PLATFORM_TARGET)
-endif
-
-ifneq (,$(TARGET_PLATFORM))
-DPDK_MAKE_ARGS += DPDK_AARCH64_GENERIC=n
-endif
-
-DPDK_MAKE_EXTRA_ARGS = $(strip $($(PLATFORM)_dpdk_make_extra_args))
-ifneq ($(DPDK_MAKE_EXTRA_ARGS),)
-DPDK_MAKE_ARGS += DPDK_MAKE_EXTRA_ARGS="$(DPDK_MAKE_EXTRA_ARGS)"
-endif
-
-external_configure = echo
-
-external_make_args = $(DPDK_MAKE_ARGS) -C external ebuild-build
-
-external_install =  make $(DPDK_MAKE_ARGS) -C external ebuild-install

src/Buptvppe/build-data/packages/extras.mk

-# empty file

src/Buptvppe/build-data/packages/gmod.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-gmod_configure_depend = vpp-install
-
-gmod_configure_args = --libdir=$(PACKAGE_INSTALL_DIR)/$(arch_lib_dir)/ganglia
-
-gmod_CPPFLAGS = $(call installed_includes_fn, vpp)
-gmod_CPPFLAGS += -I/usr/include/apr-1.0 -I/usr/include/apr-1 -I/usr/include
-gmod_LDFLAGS = $(call installed_libs_fn, vpp)
-
-gmod_image_include = echo $(arch_lib_dir)/ganglia/libgmodvpp.so etc

src/Buptvppe/build-data/packages/libmemif.mk

-# Copyright (c) 2017-2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-libmemif_source = extras
-libmemif_configure_subdir = libmemif
-
-ifneq ($(shell which cmake3),)
-CMAKE?=cmake3
-else
-CMAKE?=cmake
-endif
-
-libmemif_cmake_args ?=
-libmemif_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
-libmemif_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
-libmemif_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
-libmemif_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
-
-# Use devtoolset on centos 7
-ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
-libmemif_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
-endif
-
-libmemif_configure = \
-  cd $(PACKAGE_BUILD_DIR) && \
-  $(CMAKE) -G Ninja $(libmemif_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)
-
-libmemif_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
-
-libmemif_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install

src/Buptvppe/build-data/packages/sample-plugin.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-sample-plugin_source = src
-sample-plugin_configure_subdir = examples/sample-plugin
-sample-plugin_configure_depend = vpp-install
-sample-plugin_CPPFLAGS = $(call installed_includes_fn, vpp)
-sample-plugin_LDFLAGS = $(call installed_libs_fn, vpp)
-sample-plugin_PATH = $(call package_install_dir_fn,vpp)/bin
-
-ifneq ($(shell which cmake3),)
-CMAKE?=cmake3
-else
-CMAKE?=cmake
-endif
-
-sample-plugin_cmake_args ?=
-sample-plugin_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
-sample-plugin_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
-sample-plugin_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
-sample-plugin_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
-
-# Use devtoolset on centos 7
-ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
-sample-plugin_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
-endif
-
-sample-plugin_configure = \
-  cd $(PACKAGE_BUILD_DIR) && \
-  $(CMAKE) -G Ninja $(sample-plugin_cmake_args) \
-  $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)
-
-sample-plugin_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
-
-sample-plugin_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install

src/Buptvppe/build-data/packages/src.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.

src/Buptvppe/build-data/packages/vom.mk

-# Copyright (c) 2017-2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-vom_configure_depend = vpp-install
-vom_source = extras
-vom_configure_subdir = vom
-
-ifneq ($(shell which cmake3),)
-CMAKE?=cmake3
-else
-CMAKE?=cmake
-endif
-
-vom_cmake_args ?=
-vom_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
-vom_cmake_args += -DCMAKE_CXX_FLAGS="$($(TAG)_TAG_CPPFLAGS)"
-vom_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
-vom_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
-
-# Use devtoolset on centos 7
-ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
-vom_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
-endif
-
-vom_configure = \
-  cd $(PACKAGE_BUILD_DIR) && \
-  $(CMAKE) -G Ninja $(vom_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)
-
-vom_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
-
-vom_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install
-
-vom-package-deb: vom-install
-	@$(CMAKE) --build $(PACKAGE_BUILD_DIR)/vom -- package
-	@find $(PACKAGE_BUILD_DIR)/vom -name '*.deb' -exec mv {} $(CURDIR) \;

src/Buptvppe/build-data/packages/vpp.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-vpp_source = src
-
-ifneq ($(shell which cmake3),)
-CMAKE?=cmake3
-else
-CMAKE?=cmake
-endif
-
-vpp_cmake_prefix_path  = /opt/vpp/external/$(shell uname -m)
-vpp_cmake_prefix_path += $(PACKAGE_INSTALL_DIR)external
-vpp_cmake_prefix_path := $(subst $() $(),;,$(vpp_cmake_prefix_path))
-
-vpp_cmake_args ?=
-vpp_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
-vpp_cmake_args += -DCMAKE_BUILD_TYPE="$($(TAG)_TAG_BUILD_TYPE)"
-vpp_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(vpp_cmake_prefix_path)"
-ifeq ("$(V)","1")
-vpp_cmake_args += -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
-endif
-ifeq (,$(TARGET_PLATFORM))
-ifeq ($(MACHINE),aarch64)
-vpp_cmake_args += -DVPP_LOG2_CACHE_LINE_SIZE=7
-endif
-endif
-
-# Use devtoolset on centos 7
-ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
-vpp_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
-endif
-
-ifneq ($(VPP_EXTRA_CMAKE_ARGS),)
-vpp_cmake_args += $(VPP_EXTRA_CMAKE_ARGS)
-endif
-
-vpp_configure_depend += external-install
-vpp_configure = \
-  cd $(PACKAGE_BUILD_DIR) && \
-  $(CMAKE) -G Ninja $(vpp_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))
-#vpp_make_args = --no-print-directory
-vpp_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
-vpp_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install | grep -v 'Set runtime path'
-
-vpp-package-deb: vpp-install
-	@$(CMAKE) --build $(PACKAGE_BUILD_DIR)/vpp -- package-deb
-	@find $(PACKAGE_BUILD_DIR) \
-          -maxdepth 1 \
-          \( -name '*.changes' -o -name '*.deb' -o -name '*.buildinfo' \) \
-          -exec mv {} $(CURDIR) \;

src/Buptvppe/build-data/platforms.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Pick up per-platform makefile fragments
-$(foreach d,$(SOURCE_PATH_BUILD_DATA_DIRS),	\
-  $(eval -include $(d)/platforms/*.mk))
-

src/Buptvppe/build-data/platforms/arm32.mk

-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# vector packet processor
-arm32_arch = native
-arm32_native_tools = vppapigen
-
-arm32_uses_dpdk = yes
-arm32_uses_openssl = no
-
-arm32_root_packages = vpp vlib vlib-api vnet svm vpp-api-test \
-	gmod
-
-vlib_configure_args_arm32 = --with-pre-data=128
-vnet_configure_args_arm32 = --with-dpdk --without-libssl
-vpp_configure_args_arm32 = --with-dpdk --without-libssl
-
-arm32_dpdk_arch = "armv7a"
-arm32_dpdk_target = "arm-armv7a-linuxapp-gcc"
-arm32_dpdk_make_extra_args = "CPU_CFLAGS='-mfloat-abi=hard' \
-	CONFIG_RTE_EAL_IGB_UIO=y \
-	CONFIG_RTE_LIBRTE_E1000_PMD=y \
-	CONFIG_RTE_MAX_LCORE=4 \
-	CONFIG_RTE_MAX_NUMA_NODES=1"
-
-
-arm32_debug_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
-	-fstack-protector-all -fPIC -Werror
-arm32_debug_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
-	-fstack-protector-all -fPIC -Werror
-
-arm32_TAG_CFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
-	-fstack-protector -fPIC -Werror
-arm32_TAG_LDFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
-	-fstack-protector -fPIC -Werror

src/Buptvppe/build-data/platforms/dpaa.mk

-# Copyright 2018 NXP
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Configuration for NXP DPAA1/DPAA2 ARM64 based platform
-MACHINE=$(shell uname -m)
-
-dpaa_mtune = cortex-A72
-dpaa_march = "armv8-a+fp+simd+crc+crypto"
-
-ifeq ($(MACHINE),aarch64)
-dpaa_arch = native
-else
-dpaa_arch = aarch64
-dpaa_os = linux-gnu
-dpaa_target = aarch64-fsl-linux
-dpaa_cross_ldflags = \
-	-Wl,--dynamic-linker=/lib/ld-linux-aarch64.so.1 \
-	-Wl,-rpath=/usr/lib64 \
-	-Wl,-rpath=./.libs \
-	-Wl,-rpath=$(OPENSSL_PATH)/lib
-endif
-
-# Re-write Default configuration, if requied
-ifneq ($(CROSS_PREFIX),)
-# like: aarch64-linux-gnu
-dpaa_target = $(CROSS_PREFIX)
-endif
-
-ifneq ($(CPU_MTUNE),)
-# like: cortex-A53
-dpaa_mtune = $(CPU_MTUNE)
-endif
-
-dpaa_native_tools = vppapigen
-dpaa_root_packages = vpp
-
-# DPDK configuration parameters
-dpaa_uses_dpdk = yes
-
-# Compile with external DPDK only if "DPDK_PATH" variable is defined where we have
-# installed DPDK libraries and headers.
-ifeq ($(PLATFORM),dpaa)
-ifneq ($(DPDK_PATH),)
-#dpaa_dpdk_shared_lib = yes
-dpaa_uses_external_dpdk = yes
-dpaa_dpdk_inc_dir = $(DPDK_PATH)/include/dpdk
-dpaa_dpdk_lib_dir = $(DPDK_PATH)/lib
-else
-# compile using internal DPDK + NXP DPAA2 Driver patch
-dpaa_dpdk_arch = "armv8a"
-dpaa_dpdk_target = "arm64-dpaa-linuxapp-gcc"
-dpaa_dpdk_make_extra_args = "CONFIG_RTE_KNI_KMOD=n"
-endif
-endif
-
-# Disable the unused plugins in order to decrease the VPP pacakage size.
-vpp_configure_args_dpaa = --without-ipv6sr --with-pre-data=128 --without-libnuma
-
-# Other optional vpp_configure_args
-ifneq ($(VPP_CFG_ARGS),)
-vpp_configure_args_dpaa += $(VPP_CFG_ARGS)
-endif
-
-
-dpaa_debug_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -fPIC -fstack-protector-all -DFORTIFY_SOURCE=2 -mtls-dialect=trad \
-			-march=$(MARCH) -Werror -DCLIB_LOG2_CACHE_LINE_BYTES=6 -I$(OPENSSL_PATH)/include
-dpaa_debug_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -fstack-protector-all -DFORTIFY_SOURCE=2 \
-			-march=$(MARCH) -Werror -DCLIB_LOG2_CACHE_LINE_BYTES=6 -L$(OPENSSL_PATH)/lib
-
-
-# Use -rdynamic is for stack tracing, O0 for debugging....default is O2
-# Use -DCLIB_LOG2_CACHE_LINE_BYTES to change cache line size
-dpaa_TAG_CFLAGS = -g -Ofast -fPIC -march=$(MARCH) -mcpu=$(dpaa_mtune) -mtls-dialect=trad \
-		-mtune=$(dpaa_mtune) -funroll-all-loops -DCLIB_LOG2_CACHE_LINE_BYTES=6 -I$(OPENSSL_PATH)/include
-dpaa_TAG_LDFLAGS = -g -Ofast -fPIC -march=$(MARCH) -mcpu=$(dpaa_mtune) \
-		-mtune=$(dpaa_mtune) -funroll-all-loops -DCLIB_LOG2_CACHE_LINE_BYTES=6 -L$(OPENSSL_PATH)/lib
-

src/Buptvppe/build-data/platforms/qppc.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Qemu "p-series" powerpc64 
-
-qppc_os = linux-gnu
-
-qppc_cross_ldflags = \
-    -Wl,--dynamic-linker=/lib64/ld64.so.1
-
-qppc_arch = powerpc
-
-qppc_root_packages = vppinfra vlib vlib-api vnet svm \
-	vpp vpp-api-test
-
-vnet_configure_args_qppc = \
-	--without-libssl
-
-vpp_configure_args_qppc = \
-	--without-libssl
-
-vlib_configure_args_qppc = --with-pre-data=128
-
-qppc_march=powerpc64
-
-# native tool chain additions for this platform
-qppc_native_tools = vppapigen
-
-qppc_uses_dpdk = no
-
-qppc_debug_TAG_CFLAGS = -m64 -g -O0 -DCLIB_DEBUG -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
-qppc_debug_TAG_LDFLAGS = -m64 -g -O0 -DCLIB_DEBUG -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
-
-qppc_TAG_CFLAGS = -m64 -g -O2 -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
-qppc_TAG_LDFLAGS = -m64 -g -O2 -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
-
-

src/Buptvppe/build-data/platforms/vpp.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# vector packet processor
-
-MACHINE=$(shell uname -m)
-
-vpp_arch = native
-ifeq ($(TARGET_PLATFORM),thunderx)
-vpp_dpdk_target = arm64-thunderx-linuxapp-gcc
-endif
-
-vpp_root_packages = vpp vom
-
-vpp_debug_TAG_BUILD_TYPE = debug
-vpp_TAG_BUILD_TYPE = release
-vpp_clang_TAG_BUILD_TYPE = release
-vpp_gcov_TAG_BUILD_TYPE = gcov
-vpp_coverity_TAG_BUILD_TYPE = coverity

src/Buptvppe/build-root/autowank

-#!/bin/bash
-
-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This aptly-named script verifies and fixes time ordering
-# problems with Makefile.{am,in} aclocal.m4 configure* files.
-
-set -eu
-#set -vx
-
-touch=""
-commit=""
-comma_v=""
-aclocal=""
-optimize=""
-
-# The old autowank scheme used "touch <foo> ; sleep 1"
-# to ensure differentiable, ordered timestamps. Worked, but
-# took N seconds given N files to fix. We have an example
-# which wastes multiple minutes given the old scheme.
-#
-# This version generates a sequence of timestamps 
-# starting an hour ago. That gives us
-# lots to play with, in case some obnoxious program feels the need
-# to complain about timestamps in the future.
-
-# If we're in UTC+N land, generate UTC+(N+1) 
-# If we're in UTC-N land, generate UTC-(N-1)
-
-my_tz=`date +%z`
-sign=`echo $my_tz | sed -n -e 's/^\(.\{1\}\).*$/\1/p'`
-t=`echo $my_tz | sed -n -e 's/^\(.\{1\}\)//p'`
-tz_hour=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
-tz_hour=`echo $tz_hour | sed 's/^0//'`
-
-if [ $sign = "-" ] ; then
-    sign="+"
-    let tz_hour=$tz_hour+1
-    if [[ $tz_hour -ge "24" ]] ; then
-        tz_hour=0
-    fi
-else
-    sign="-"
-    let tz_hour=$tz_hour-1 || true
-    if [[ $tz_hour -lt "0" ]] ; then
-        tz_hour=23
-    fi
-fi
-
-# Timestamp, an hour ago:
-ts_begin=`TZ=UTC${sign}${tz_hour} date +%Y%m%d%H%M.%S`
-
-# break into constituent parts
-year=`echo $ts_begin | sed -n -e 's/^\(.\{4\}\).*$/\1/p'`
-t=`echo $ts_begin | sed -n -e 's/^\(.\{4\}\)//p'`
-month=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
-t=`echo $t | sed -n -e 's/^\(.\{2\}\)//p'`
-day=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
-t=`echo $t | sed -n -e 's/^\(.\{2\}\)//p'`
-hour=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
-t=`echo $t | sed -n -e 's/^\(.\{2\}\)//p'`
-min=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
-t=`echo $t | sed -n -e 's/^\(.\{2\}\)//p'`
-sec=`echo $t | sed -n -e 's/\.//p'`
-
-# How many days in the current month?
-# Good until someone changes the calendar rules
-days_in_current_month() {
-    if [[ $month -eq 9 || $month -eq 4 \
-        || $month -eq 6 || $month -eq 11 ]] ; then
-	return 30;
-    fi
-    if [[ $month -eq 2 ]] ; then
-	let t=($year/400)*400
-	if [[ $t -eq $year ]] ; then
-	    return 29;
-	fi
-	let t=($year/100)*100
-	if [[ $t -eq $year ]] ; then
-	    return 28;
-	fi
-	let t=($year/4)*4
-	if [[ $t -eq $year ]] ; then
-	    return 29;
-	fi
-	return 28;
-    fi
-    return 31;
-}
-
-# The next timestamp to issue via touch
-# A real hemorrhoid because bash isnt easily convinced
-# that 08 is a decimal number
-next_ts() {
-    sec=`echo $sec | sed 's/^0//'`
-    let sec=$sec+1
-    if [[ "$sec" -lt "60" ]] ; then
-        if [[ "$sec" -lt "10" ]] ; then
-            sec=0$sec
-        fi
-	return 0;
-    fi
-    sec="00"
-    min=`echo $min | sed 's/^0//'`
-    let min=$min+1
-    if [[ "$min" -lt "60" ]] ; then
-        if [[ "$min" -lt "10" ]] ; then
-            min=0$min
-        fi
-	return 0;
-    fi
-    min="00"
-    hour=`echo $hour | sed 's/^0//'`
-    let hour=$hour+1
-    if [[ "$hour" -lt "24" ]] ; then
-        if [[ "$hour" -lt "10" ]] ; then
-            hour=0$hour
-        fi
-	return 0;
-    fi
-    hour="00"
-    days_in_current_month
-    days_in_month=$?
-    if [[ "$day" -lt "$days_in_month" ]] ; then
-        day=`echo $day | sed 's/^0//'`
-	let day=$day+1
-        if [[ "$day" -lt "10" ]] ; then
-            day=0$day
-        fi
-	return 0;
-    fi
-    day="01"
-    month=`echo $month | sed 's/^0//'`
-    let month=$month+1
-    if [[ "$month" -lt "13" ]] ; then
-        if [[ "$month" -lt "10" ]] ; then
-            month=0$month
-        fi
-	return 0;
-    fi
-    month="01"
-    let year=$year+1
-    return 0;
-}
-
-while [ $# != 0 ] ; do
-  case "$1" in
-    (--commav) comma_v=",v" ;;
-    (--touch) touch=yes ;;
-    (--aclocal) aclocal=yes ;;
-    (--nooptimize) optimize="" ;;
-    (--commit=*) commit="$1" ;;
-    (*) echo "$0: usage [--touch|--commit|]" > /dev/stderr
-        exit 17 ;;
-  esac
-  shift
-done
-
-if [ "${aclocal}" != "" ] ; then
-    if [ -f aclocal.m4 ] ; then
-        echo touching aclocal.m4
-        sleep 1
-        touch aclocal.m4
-    else
-        echo aclocal.m4 not found
-    fi
-fi
-
-if [ "${comma_v}" != "" -a "${commit}" != "" ] ; then
-  echo "No, you may NOT molest ,v files directly.  Go away." > /dev/stderr
-  exit 1
-fi
-
-function touchme ()
-{
-  local victim="${1}"
-  shift
-  local touchmebaby=""
-  local sein="is"
-  local newer="no"
-  local older="no"
-
-  if [ ! -r "$victim" ] ; then
-    return
-  fi
-
-  while [ $# != 0 ] ; do
-    if [ "${1}" -nt "${victim}" ] ; then
-        newer="yes"
-    fi
-    if [ "${1}" -ot "${victim}" ] ; then
-        older="yes"
-    fi
-    if [ "${newer}" = "no" -a "${older}" = "no" ] ; then
-        newer="yes"
-    fi
-
-    if [ "${newer}" = "yes" ] ; then
-      if [ "${touchmebaby}" = "" ] ; then
-        touchmebaby="${1}"
-      else
-        sein="are"
-        touchmebaby="${touchmebaby} ${1}"
-      fi
-    fi
-    shift
-  done
-  if [ -n "${touchmebaby}" ] ; then
-    echo "*** ${touchmebaby} ${sein} newer than ${victim}  "
-    if [ -n "${touch}" ] ; then
-      # 
-      # This is the old version, in case something backfires...
-      if [ "${optimize}" != "yes" ] ; then 
-          echo "Fixing " ;touch -c "$victim" ; sleep 1
-      else
-          echo "Fixing "
-      # echo touch -c -t $year$month$day$hour$min.$sec "$victim"
-          touch -c -t $year$month$day$hour$min.$sec "$victim"
-          next_ts
-      fi
-    fi
-  fi
-}
-
-makefileins="`/usr/bin/find . -name Attic -prune -o -name Makefile.in${comma_v}`"
-
-# aclocal.m4 depends on ***/Makefile.am, configure.ac, acinclude.m4, *.m4 crap
-touchme aclocal.m4${comma_v} \
-        `/usr/bin/find . -name Attic -prune -o -name Makefile.am${comma_v}` \
-        "configure.in${comma_v}" "configure.ac${comma_v}" \
-        "acinclude.m4${comma_v}"
-
-# Makefile.in must be newer than Makefile.am
-for f in $makefileins ; do
-  d="`dirname ${f}`"
-  touchme "${d}/Makefile.in${comma_v}" "${d}/Makefile.am${comma_v}"
-done
-
-# Makefile.in depends on aclocal.m4
-for f in $makefileins ; do
-  d="`dirname $f`"
-  touchme "${d}/Makefile.in${comma_v}" "aclocal.m4${comma_v}"
-done
-
-# config.in must be newer than aclocal.m4 and configure.ac
-if [ -f "config.in${comma_v}" ] ; then
-  touchme "config.in${comma_v}" "aclocal.m4${comma_v}" \
-                                "configure.ac${comma_v}" \
-                                "configure.in${comma_v}"
-fi
-
-# config.h.in (or More Thoroughly Modern configh.in)
-# must be newer than aclocal.m4 and (obsolete) acconfig.h
-for c_h_in in config.h.in configh.in ; do
-  if [ -f "${c_h_in}${comma_v}" ]; then
-    touchme "${c_h_in}${comma_v}" "aclocal.m4${comma_v}" "acconfig.h${comma_v}"
-    #>>>> WTF?  Why?  This is nonsensical
-    ## ***/Makefile.in must be newer than config.h.in
-    #for f in $makefileins ; do
-    #  touchme "$f" "${c_h_in}${comma_v}"
-    #done
-  fi
-done
-
-# configure must be newer than everything
-# touchme configure $makefileins -- why would this be needed?
-touchme "configure${comma_v}" "aclocal.m4${comma_v}" "acconfig.h${comma_v}" \
-                              "config.in${comma_v}" "config.h.in${comma_v}" \
-                              "configh.in${comma_v}"
-
-if [ -n "${commit}" ] ; then
-  commit="${commit:9}" # strip off "--commit="
-  # First ***/Makefile.am,
-  # configure.in, configure.ac,
-  # ***/*.m4
-  # acconfig.h
-  cvs commit -m "${commit}" \
-             `for f in ${makefileins} ; do \
-                [ -f "$${f%.in}.am" ] && echo "$${f%.in}.am" ; \
-              done` \
-             `[ -f configure.in ] && echo configure.in` \
-             `[ -f configure.ac ] && echo configure.ac` \
-             `[ -f acconfig.h ] && echo acconfig.h` \
-             `/usr/bin/find . -name '*.m4' -mindepth 2`
-
-  # Next aclocal.m4
-  [ -f "aclocal.m4" ] && cvs commit -m "${commit}" aclocal.m4
-
-  # Next config.in, config.h.in, configh.in
-  [ -f "config.in" ] && cvs commit -m "${commit}" config.in
-  [ -f "config.h.in" ] && cvs commit -m "${commit}" config.h.in
-  [ -f "configh.in" ] && cvs commit -m "${commit}" configh.in
-
-  # Last ***/Makefile.in, configure
-  cvs commit -m "${commit}" ${makefileins} configure
-fi

src/Buptvppe/build-root/build-config.mk

-SOURCE_PATH = $(CURDIR)/..

src/Buptvppe/build-root/build-config.mk.README

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# To specify directories to find sources, build/packages/*.mk
-# and build/platforms.mk
-# SOURCE_PATH = PATH1 PATH2 ...

src/Buptvppe/build-root/config.site

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-######################################################################
-# glibc
-######################################################################
-
-# glibc needs this for cross compiling 
-libc_cv_forced_unwind=yes
-libc_cv_c_cleanup=yes
-libc_cv_ssp=no
-# fixes gentoo build; not sure why?
-libc_cv_uname_release=""
-libc_cv_uname_version=""
-ac_cv_header_cpuid_h=yes
-######################################################################
-# bash
-######################################################################
-
-# Bash configure.in uses this to work around an autoconf 2.53 bug
-ac_cv_func_setvbuf_reversed=no
-ac_cv_rl_version=5.1
-bash_cv_termcap_lib=libncurses
-
-# These mostly come from debian bash-2.05b changes
-# They are needed to make a functioning bash.  Without these
-# settings gdbserver exiting would cause the invoking bash to
-# exit also.
-bash_cv_have_mbstate_t=yes
-bash_cv_dup2_broken=no
-bash_cv_pgrp_pipe=no
-bash_cv_sys_siglist=yes
-bash_cv_under_sys_siglist=yes
-bash_cv_opendir_not_robust=no
-bash_cv_printf_declared=yes
-bash_cv_ulimit_maxfds=yes
-bash_cv_getenv_redef=yes
-bash_cv_getcwd_calls_popen=no
-bash_cv_func_strcoll_broken=no
-bash_cv_must_reinstall_sighandlers=no
-bash_cv_type_quad_t=yes
-bash_cv_func_sigsetjmp=present
-bash_cv_job_control_missing=present
-bash_cv_sys_named_pipes=present
-bash_cv_type_rlimit=long
-bash_cv_printf_a_format=yes
-bash_cv_unusable_rtsigs=no
-
-######################################################################
-# Apache
-######################################################################
-ac_cv_func_setpgrp_void=yes
-apr_cv_process_shared_works=yes
-apr_cv_tcp_nodelay_with_cork=yes
-ap_void_ptr_lt_long=no
-
-case ${host_cpu} in
-x86_64 | alpha)
-  ac_cv_sizeof_ssize_t=8
-  ac_cv_sizeof_size_t=8
-  ac_cv_sizeof_pid_t=4
-  ;;
-*)
-  ac_cv_sizeof_ssize_t=4
-  ac_cv_sizeof_size_t=4
-  ac_cv_sizeof_pid_t=4
-  ;;
-esac
-
-######################################################################
-# gdb
-######################################################################
-gdb_cv_func_ptrace_args=int,int,long,long
-
-######################################################################
-# dpkg
-######################################################################
-dpkg_cv_va_copy=yes
-
-######################################################################
-# coreutils
-######################################################################
-ac_cv_search_clock_gettime=no
-gl_cv_fs_space=yes
-
-######################################################################
-# tcpdump
-######################################################################
-ac_cv_linux_vers=2
-ac_cv_func_pcap_findalldevs=no
-
-######################################################################
-# flex
-######################################################################
-ac_cv_func_malloc_0_nonnull=yes
-ac_cv_func_realloc_0_nonnull=yes
-
-######################################################################
-# tar
-######################################################################
-tar_gl_cv_func_mknod_works=yes

src/Buptvppe/build-root/copyimg

-#!/bin/sh
-
-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-if [ $# -lt 2 ]; then
-    cat - <<EOF
-$0 FROM-DIR TO-DIR ENVIRONMENT
-
-Copies files from one directory to another with possible
-transformations.
-
-Files named FILE.spp will be transformed via the spp preprocessor
-subject to environment definitions.  Source FILE.copyimgspp results in
-destination file FILE in the corresponding destination directory.
-
-Files named FILE.copyimgsh are run as shell scripts in (i.e. via chdir)
-the corresponding destination directory (and not copied).
-
-First regular files are copied.  Then transformations are preformed.
-Finally, shell scripts are run.
-EOF
-  exit 1;
-fi
-
-FROM_DIR=$1
-TO_DIR=$2
-
-FILTER=" -and -not -name '*~'";
-FILTER="${FILTER} -and -not -name '.*~'";
-FILTER="$FILTER -and -not -path '*/.git*'";
-FILTER="$FILTER -and -not -path '*/.svn*'";
-FILTER="$FILTER -and -not -path '*/.CVS*'";
-
-FROM_FILES=`(cd $FROM_DIR; eval "find . -not -type d $FILTER")`;
- FROM_DIRS=`(cd $FROM_DIR; eval "find .      -type d $FILTER")`;
-
-COPY_FILES=
-SPP_FILES=
-SH_FILES=
-for f in $FROM_FILES; do
-  case $f in
-    *.copyimgspp) SPP_FILES="$SPP_FILES $f" ;;
-    *.copyimgsh)   SH_FILES="$SH_FILES $f" ;;
-    *)		 COPY_FILES="$COPY_FILES $f";;
-  esac
-done
-
-# Make destination directories.
-mkdir -p $TO_DIR;
-if [ "$FROM_DIRS" != "" ]; then
-  for d in $FROM_DIRS; do
-    mkdir -p $TO_DIR/$d;
-  done
-fi
-
-# Copy files
-if [ "$COPY_FILES" != "" ]; then
-    tar -cf - -C $FROM_DIR $COPY_FILES | tar --preserve-permissions -xf - -C $TO_DIR;
-fi
-
-# Use spp to transform any spp files
-if [ "$SPP_FILES" != "" ]; then
-  for f in $SPP_FILES; do
-    d=`dirname $f`;
-    b=`basename $f .copyimgspp`;
-    mkdir -p $TO_DIR/$d;
-    t=$TO_DIR/$d/$b;
-    spp -o $TO_DIR/$d/$b $FROM_DIR/$f || exit 1;
-  done;
-fi
-
-# Now that all files have been copied/created we run any shell scripts
-ABS_FROM_DIR=`(cd $FROM_DIR; pwd)`;
-if [ "$SH_FILES" != "" ]; then
-  # Allow directory to define some functions
-  if [ -f $FROM_DIR/copyimgsh-functions.sh ]; then
-    . $FROM_DIR/copyimgsh-functions.sh ;
-  fi ;
-  for f in $SH_FILES; do
-    d=`dirname $f`;
-    b=`basename $f`;
-    mkdir -p $TO_DIR/$d;
-    (cd $TO_DIR/$d; . $ABS_FROM_DIR/$d/$b) || exit 1;
-  done;
-fi;

src/Buptvppe/build-root/platforms.mk

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#
-# Copyright (c) 2007-2008 Eliot Dresselhaus
-#
-#  Permission is hereby granted, free of charge, to any person obtaining
-#  a copy of this software and associated documentation files (the
-#  "Software"), to deal in the Software without restriction, including
-#  without limitation the rights to use, copy, modify, merge, publish,
-#  distribute, sublicense, and/or sell copies of the Software, and to
-#  permit persons to whom the Software is furnished to do so, subject to
-#  the following conditions:
-#
-#  The above copyright notice and this permission notice shall be
-#  included in all copies or substantial portions of the Software.
-#
-#  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-#  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-#  NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-#  LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-#  OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-#  WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-
-# Platform selects e.g. Linux config file
-PLATFORM = vpp
-
-native_arch = native
-
-# Default for which packages go into read-only image
-# used to have pam
-default_root_packages = bash coreutils sysvinit util-linux mingetty procps
-
-# Linux based platforms (PLATFORM=i686 PLATFORM=ppc etc.)
-i686_arch = i686
-x86_64_arch = x86_64
-ppc_arch = ppc
-

src/Buptvppe/build-root/scripts/checkstyle.sh

-#!/bin/bash
-
-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-VPP_DIR=`dirname $0`/../../
-EXIT_CODE=0
-FIX="0"
-FULL="0"
-CHECKSTYLED_FILES=""
-UNCHECKSTYLED_FILES=""
-
-# If the user provides --fix, then actually fix things
-# Note: this is meant for use outside of the CI Jobs, by users cleaning things up
-
-while true; do
-	case ${1} in
-		--fix)
-			FIX="1"
-			;;
-		--full)
-			FULL="1"
-			;;
-	esac
-	shift || break
-done
-
-if [ "${FULL}" == "1" ]; then
-	FILELIST=$(git ls-tree -r HEAD --name-only)
-else
-	FILELIST=$((git diff HEAD~1.. --name-only; git ls-files -m ) | sort -u)
-fi
-
-# Check to make sure we have indent.  Exit if we don't with an error message, but
-# don't *fail*.
-command -v indent > /dev/null
-if [ $? != 0 ]; then
-    echo "Cound not find required command \"indent\".  Checkstyle aborted"
-    exit ${EXIT_CODE}
-fi
-indent --version
-
-# Check to make sure we have clang-format.  Exit if we don't with an error message, but
-# don't *fail*.
-HAVE_CLANG_FORMAT=0
-command -v clang-format > /dev/null
-if [ $? != 0 ]; then
-    echo "Could not find command \"clang-format\". Checking C++ files will cause abort"
-else
-    clang-format --version
-    x=$(echo "" | clang-format 2>&1)
-    if [[ "$x" == "" ]]; then
-        HAVE_CLANG_FORMAT=1
-    else
-	echo "Output produced while formatting empty file (expected empty string):"
-	echo "$x"
-        echo "Could not find working \"clang-format\". Checking C++ files will cause abort"
-    fi
-fi
-
-cd ${VPP_DIR}
-git status
-for i in ${FILELIST}; do
-    if [ -f ${i} ] && [ ${i} != "build-root/scripts/checkstyle.sh" ] && [ ${i} != "extras/emacs/fix-coding-style.el" ]; then
-        grep -q "fd.io coding-style-patch-verification: ON" ${i}
-        if [ $? == 0 ]; then
-            EXTENSION=`basename ${i} | sed 's/^\w\+.//'`
-            case ${EXTENSION} in
-                hpp|cpp|cc|hh)
-                    CMD="clang-format"
-                    if [ ${HAVE_CLANG_FORMAT} == 0 ]; then
-                            echo "C++ file detected. Abort. (missing clang-format)"
-                            exit ${EXIT_CODE}
-                    fi
-                    ;;
-                *)
-                    CMD="indent"
-                    ;;
-            esac
-            CHECKSTYLED_FILES="${CHECKSTYLED_FILES} ${i}"
-            if [ ${FIX} == 0 ]; then
-                if [ "${CMD}" == "clang-format" ]
-                then
-                    clang-format ${i} > ${i}.out2
-                else
-                    indent ${i} -o ${i}.out1 > /dev/null 2>&1
-                    indent ${i}.out1 -o ${i}.out2 > /dev/null 2>&1
-                fi
-                # Remove trailing whitespace
-                sed -i -e 's/[[:space:]]*$//' ${i}.out2
-                diff -q ${i} ${i}.out2
-            else
-                if [ "${CMD}" == "clang-format" ]; then
-                    clang-format -i ${i} > /dev/null 2>&1
-                else
-                    indent ${i}
-                    indent ${i}
-                fi
-                # Remove trailing whitespace
-                sed -i -e 's/[[:space:]]*$//' ${i}
-            fi
-            if [ $? != 0 ]; then
-                EXIT_CODE=1
-                echo
-                echo "Checkstyle failed for ${i}."
-                if [ "${CMD}" == "clang-format" ]; then
-                    echo "Run clang-format as shown to fix the problem:"
-                    echo "clang-format -i ${VPP_DIR}${i}"
-                else
-                    echo "Run indent (twice!) as shown to fix the problem:"
-                    echo "indent ${VPP_DIR}${i}"
-                    echo "indent ${VPP_DIR}${i}"
-                fi
-            fi
-            if [ -f ${i}.out1 ]; then
-                rm ${i}.out1
-            fi
-            if [ -f ${i}.out2 ]; then
-                rm ${i}.out2
-            fi
-        else
-            UNCHECKSTYLED_FILES="${UNCHECKSTYLED_FILES} ${i}"
-        fi
-    else
-        UNCHECKSTYLED_FILES="${UNCHECKSTYLED_FILES} ${i}"
-    fi
-done
-
-if [ ${EXIT_CODE} == 0 ]; then
-    echo "*******************************************************************"
-    echo "* VPP CHECKSTYLE SUCCESSFULLY COMPLETED"
-    echo "*******************************************************************"
-else
-    echo "*******************************************************************"
-    echo "* VPP CHECKSTYLE FAILED"
-    echo "* CONSULT FAILURE LOG ABOVE"
-    echo "* NOTE: Running 'build-root/scripts/checkstyle.sh --fix' *MAY* fix the issue"
-    echo "*******************************************************************"
-fi
-exit ${EXIT_CODE}

src/Buptvppe/build-root/scripts/fts.py

-../../src/scripts/fts.py
\ No newline at end of file

src/Buptvppe/build-root/scripts/remove-rpath

-../../src/scripts/remove-rpath
\ No newline at end of file

src/Buptvppe/build-root/scripts/set-rpath

-#!/bin/bash
-
-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-if [ -z $1 ]; then
-	echo "Please specify path"
-	exit 1
-fi
-
-which chrpath &> /dev/null
-
-if [ $? -ne 0 ] ; then
-	echo "Please install chrpath tool"
-	exit 1
-fi
-
-cd $1
-
-libs=$(find * -type f -name \*.so\*)
-execs=$(find * -type f -path bin/\* )
-
-echo "Setting RPATH to $2 ..."
-
-for i in $libs $execs; do
-	# in case non-ELF file is found
-	chrpath $i 2> /dev/null > /dev/null
-	if [ $? -eq 0 ] ; then
-		echo $i
-		chrpath -r $2
-	fi
-done
-

src/Buptvppe/build-root/scripts/version

-../../src/scripts/version
\ No newline at end of file

src/Buptvppe/build-root/vagrant

-../extras/vagrant
\ No newline at end of file

src/Buptvppe/build/external/Makefile

-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Scripts require non-POSIX parts of bash
-SHELL := /bin/bash
-
-DL_CACHE_DIR = $(HOME)/Downloads
-MAKE ?= make
-MAKE_ARGS ?= -j
-BUILD_DIR        ?= $(CURDIR)/_build
-INSTALL_DIR      ?= $(CURDIR)/_install
-PKG_VERSION ?= $(shell git describe --abbrev=0 | cut -d- -f1 | cut -dv -f2 | cut -d. -f1,2)
-PKG_SUFFIX ?= $(shell git log --oneline v$(PKG_VERSION)-rc0.. -- . | wc -l)
-JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
-	$(shell grep -c ^processor /proc/cpuinfo), 2)
-
-B := $(BUILD_DIR)
-I := $(INSTALL_DIR)
-
-ifneq ($(shell which cmake3),)
-CMAKE?=cmake3
-else
-CMAKE?=cmake
-endif
-
-include packages.mk
-include packages/nasm.mk
-include packages/ipsec-mb.mk
-include packages/quicly.mk
-include packages/dpdk.mk
-include packages/rdma-core.mk
-
-.PHONY: clean
-clean:
-	@rm -rf $(B) $(I)
-
-.PHONY: install
-install: dpdk-install rdma-core-install quicly-install
-
-.PHONY: config
-config: dpdk-config rdma-core-config
-
-##############################################################################
-# .deb packaging
-##############################################################################
-
-DEB_VER := $(PKG_VERSION)
-DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
-DEV_DEB=vpp-ext-deps_$(DEB_VER)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
-INSTALLED_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-ext-deps 2> /dev/null)
-
-.PHONY: build-deb install-deb check-deb
-
-deb/debian/changelog: Makefile
-	@echo "vpp-ext-deps ($(DEB_VER)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
-	@echo "" >> $@
-	@echo "  * Version $(DEB_VER)" >> $@
-	@echo "" >> $@
-	@echo " -- VPP Dev <vpp-dev@lists.fd.io>  $(shell date -R)" >> $@
-
-$(DEV_DEB): deb/debian/changelog
-	@cd deb && dpkg-buildpackage -b -uc -us
-	git clean -fdx deb
-
-build-deb: $(DEV_DEB)
-
-install-deb:
-ifneq ($(INSTALLED_VER),$(DEB_VER)-$(PKG_SUFFIX))
-	@make $(DEV_DEB)
-	@sudo dpkg -i $(DEV_DEB)
-else
-	@echo "=========================================================="
-	@echo " Up-to-date vpp-ext-deps package already installed"
-	@echo "=========================================================="
-endif
-
-check-deb:
-ifneq ($(INSTALLED_VER),$(DEB_VER)-$(PKG_SUFFIX))
-	@echo "=========================================================="
-	@echo " Out of date vpp-ext-deps package installed."
-	@echo " Installed: $(INSTALLED_VER)"
-	@echo " Needed: $(DEB_VER)-$(PKG_SUFFIX)"
-	@echo ""
-	@echo " Please upgrade by invoking 'make install-ext-deps'"
-	@echo " from the top level directory."
-	@echo "=========================================================="
-endif
-
-##############################################################################
-# .rpm packaging
-##############################################################################
-
-RPM_VER := $(PKG_VERSION)
-RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
-DEV_RPM=vpp-ext-deps-$(RPM_VER)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
-INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-ext-deps 2> /dev/null | grep -v "not inst")
-
-.PHONY: build-rpm install-rpm check-rpm
-
-$(DEV_RPM): Makefile rpm/vpp-ext-deps.spec
-	@rpmbuild -bb \
-	  --define "_topdir $(CURDIR)/rpm" \
-	  --define "_version $(RPM_VER)" \
-	  --define "_release $(PKG_SUFFIX)" \
-	  $(CURDIR)/rpm/vpp-ext-deps.spec
-	mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
-	@git clean -fdx rpm
-
-build-rpm: $(DEV_RPM)
-
-install-rpm:
-ifneq ($(INSTALLED_RPM_VER),$(RPM_VER)-$(PKG_SUFFIX))
-	@$(MAKE) $(DEV_RPM)
-	sudo rpm -e vpp-ext-deps || true
-	sudo rpm -Uih --force $(DEV_RPM)
-else
-	@echo "=========================================================="
-	@echo " Up-to-date vpp-ext-deps package already installed"
-	@echo "=========================================================="
-endif
-
-check-rpm:
-ifneq ($(INSTALLED_RPM_VER),$(RPM_VER)-$(PKG_SUFFIX))
-	@echo "=========================================================="
-	@echo " Out of date vpp-ext-deps package installed."
-	@echo " Installed: $(INSTALLED_RPM_VER)"
-	@echo " Needed: $(RPM_VER)-$(PKG_SUFFIX)"
-	@echo ""
-	@echo " Please upgrade by invoking 'make install-ext-deps'"
-	@echo " from the top level directory."
-	@echo "=========================================================="
-endif
-
-##############################################################################
-# ebuild support
-##############################################################################
-
-.PHONY: ebuild-build ebuild-install
-
-ebuild-build:
-ifeq ($(INSTALLED_VER)$(INSTALLED_RPM_VER),)
-	@echo "=========================================================="
-	@echo "Building vpp-ext-deps from source. Consider installing"
-	@echo "development package by invoking 'make install-ext-deps'"
-	@echo "from the top level directory"
-	@echo "=========================================================="
-	make config
-else
-ifneq ($(INSTALLED_VER),)
-	make check-deb
-endif
-ifneq ($(INSTALLED_RPM_VER),)
-	make check-rpm
-endif
-endif
-
-ebuild-install:
-ifeq ($(INSTALLED_VER)$(INSTALLED_RPM_VER),)
-	make install
-endif

src/Buptvppe/build/external/deb/debian/compat

-9

src/Buptvppe/build/external/deb/debian/control

-Source: vpp-ext-deps
-Section: net
-Priority: extra
-Maintainer: vpp-dev@lists.fd.io
-Build-Depends: debhelper (>= 9), dkms
-Standards-Version: 3.9.4
-
-Package: vpp-ext-deps
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: VPP developer package containing dependencies
-Replaces: vpp-dpdk-dev
-Conflicts: vpp-dpdk-dev

src/Buptvppe/build/external/deb/debian/dkms/Makefile

-obj-m:=igb_uio.o
-
-CONFIG_MODULE_SIG=n
-
-EXTRA_CFLAGS += -Winline -I$(PWD)
-
-default:
-	    $(MAKE) -C /lib/modules/$(shell uname -r)/build M=$(shell pwd) modules
-clean:
-	    $(MAKE) -C /lib/modules/$(shell uname -r)/build M=$(shell pwd) clean

src/Buptvppe/build/external/deb/debian/rules

-#!/usr/bin/make -f
-DH_VERBOSE = 1
-DEB_BUILD_OPTIONS = noddebs
-PKG=vpp-ext-deps
-
-VERSION = $(shell dpkg-parsechangelog | sed -nr '/^Version:/s/Version: //p')
-BASE_VER = $(word 1, $(subst -, ,$(VERSION)))
-
-export BUILD_DIR=$(CURDIR)/_build
-export INSTALL_DIR=$(CURDIR)/debian/tmp/opt/vpp/external/$(shell uname -m)/
-
-MAKE_ARGS=-C ..
-
-include /usr/share/dpkg/default.mk
-
-%:
-	dh $@
-
-override_dh_clean:
-	make $(MAKE_ARGS) clean
-
-override_dh_auto_configure:
-
-override_dh_install:
-	make $(MAKE_ARGS) install
-	dh_install -p$(PKG) --autodest /opt
-

src/Buptvppe/build/external/packages.mk

-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-define h1
-	@echo "--- $(1)"
-endef
-
-define package
-$1_tarball_strip_dirs ?= 0
-$1_src_dir ?= $(B)/src-$1
-$1_patch_dir ?= $(CURDIR)/patches/$1_$($1_version)
-$1_build_dir ?= $(B)/build-$1
-$1_install_dir ?= $(I)
-$1_config_log ?= $(B)/$1.config.log
-$1_build_log ?= $(B)/$1.build.log
-$1_install_log ?= $(B)/$1.install.log
-
-##############################################################################
-# Download
-##############################################################################
-downloads/$($1_tarball):
-	mkdir -p downloads
-	@if [ -e $(DL_CACHE_DIR)/$($1_tarball) ] ; \
-		then cp $(DL_CACHE_DIR)/$($1_tarball) $$@ ; \
-	else \
-		echo "Downloading $($1_url)" ; \
-		curl -o $$@ -LO $($1_url) ; \
-	fi
-	@rm -f $(B)/.$1.download.ok
-
-$(B)/.$1.download.ok: downloads/$($1_tarball)
-	@mkdir -p $(B)
-	$$(call h1,"validating $1 $($1_version) checksum")
-	@SUM=$$(shell openssl md5 $$< | cut -f 2 -d " " -) ; \
-	([ "$$$${SUM}" = "$($1_tarball_md5sum)" ] || \
-	( echo "==========================================================" && \
-	  echo "Bad Checksum!" && \
-	  echo "Expected:   $($1_tarball_md5sum)" && \
-	  echo "Calculated: $$$${SUM}" && \
-	  echo "Please remove $$< and retry" && \
-	  echo "==========================================================" && \
-	  false ))
-	@touch $$@
-
-.PHONY: $1-download
-$1-download: $(B)/.$1.download.ok
-
-##############################################################################
-# Extract
-##############################################################################
-$(B)/.$1.extract.ok: $(B)/.$1.download.ok
-	$$(call h1,"extracting $1 $($1_version)")
-	@mkdir -p $$($1_src_dir)
-	@tar \
-	  --directory $$($1_src_dir) \
-	  --extract \
-	  --strip-components=$$($1_tarball_strip_dirs) \
-	  --file downloads/$($1_tarball)
-	@touch $$@
-
-.PHONY: $1-extract
-$1-extract: $(B)/.$1.extract.ok
-
-##############################################################################
-# Patch
-##############################################################################
-$(B)/.$1.patch.ok: $(B)/.$1.extract.ok
-	$$(call h1,"patching $1 $($1_version)")
-ifneq ($$(wildcard $$($1_patch_dir)/*.patch),)
-	@for f in $$($1_patch_dir)/*.patch ; do \
-		echo "Applying patch: $$$$(basename $$$$f)" ; \
-		patch -p1 -d $$($1_src_dir) < $$$$f ; \
-	done
-endif
-	@touch $$@
-
-.PHONY: $1-patch
-$1-patch: $(B)/.$1.patch.ok
-
-##############################################################################
-# Config
-##############################################################################
-
-ifeq ($$(call $1_config_cmds),)
-define $1_config_cmds
-	@cd $$($1_build_dir) && \
-	  CFLAGS="$$($1_cflags)" \
-	  $$($1_src_dir)/configure \
-	    --prefix=$$($1_install_dir) \
-	    $$($1_configure_args) > $$($1_config_log)
-endef
-endif
-
-$(B)/.$1.config.ok: $(B)/.$1.patch.ok $(addsuffix -install,$($1_depends))
-	$$(call h1,"configuring $1 $($1_version) - log: $$($1_config_log)")
-	@mkdir -p $$($1_build_dir)
-	$$(call $1_config_cmds)
-	@touch $$@
-
-.PHONY: $1-config
-$1-config: $(B)/.$1.config.ok
-
-##############################################################################
-# Build
-##############################################################################
-
-ifeq ($$(call $1_build_cmds),)
-define $1_build_cmds
-	@$(MAKE) $(MAKE_ARGS) -C $$($1_build_dir) > $$($1_build_log)
-endef
-endif
-
-$(B)/.$1.build.ok: $(B)/.$1.config.ok
-	$$(call h1,"building $1 $($1_version) - log: $$($1_build_log)")
-	$$(call $1_build_cmds)
-	@touch $$@
-
-.PHONY: $1-build
-$1-build: $(B)/.$1.build.ok
-
-##############################################################################
-# Install
-##############################################################################
-
-ifeq ($$(call $1_install_cmds),)
-define $1_install_cmds
-	@$(MAKE) $(MAKE_ARGS) -C $$($1_build_dir) install > $$($1_install_log)
-endef
-endif
-
-$(B)/.$1.install.ok: $(B)/.$1.build.ok
-	$$(call h1,"installing $1 $($1_version) - log: $$($1_install_log)")
-	$$(call $1_install_cmds)
-	@touch $$@
-
-.PHONY: $1-install
-$1-install: $(B)/.$1.install.ok
-
-ALL_TARGETS += $1-install
-endef

src/Buptvppe/build/external/packages/ipsec-mb.mk

-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-ipsec-mb_version             := 0.53
-ipsec-mb_tarball             := v$(ipsec-mb_version).tar.gz
-ipsec-mb_tarball_md5sum_0.49 := 3a2bee86f25f6c8ed720da5b4b8d4297
-ipsec-mb_tarball_md5sum_0.52 := 11ecfa6db4dc0c4ca6e5c616c141ac46
-ipsec-mb_tarball_md5sum_0.53 := e9b3507590efd1c23321518612b644cd
-ipsec-mb_tarball_md5sum      := $(ipsec-mb_tarball_md5sum_$(ipsec-mb_version))
-ipsec-mb_tarball_strip_dirs  := 1
-ipsec-mb_depends             := nasm
-ipsec-mb_url                 := http://github.com/01org/intel-ipsec-mb/archive/$(ipsec-mb_tarball)
-
-define  ipsec-mb_config_cmds
-	@true
-endef
-
-define  ipsec-mb_build_cmds
-	@make -C $(ipsec-mb_src_dir) -j \
-	  SHARED=n \
-	  PREFIX=$(ipsec-mb_install_dir) \
-	  NASM=$(ipsec-mb_install_dir)/bin/nasm \
-	  EXTRA_CFLAGS="-g -msse4.2" > $(ipsec-mb_build_log)
-endef
-
-define  ipsec-mb_install_cmds
-	@mkdir -p $(ipsec-mb_install_dir)/include
-	@mkdir -p $(ipsec-mb_install_dir)/lib
-	@cp $(ipsec-mb_src_dir)/intel-ipsec-mb.h $(ipsec-mb_install_dir)/include
-	@cp $(ipsec-mb_src_dir)/libIPSec_MB.a $(ipsec-mb_install_dir)/lib
-endef
-
-$(eval $(call package,ipsec-mb))
-
-

src/Buptvppe/build/external/packages/nasm.mk

-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-nasm_version            := 2.14.02
-nasm_tarball            := nasm-$(nasm_version).tar.xz
-nasm_tarball_md5sum     := 6390bd67b07ff1df9fe628b6929c0353
-nasm_tarball_strip_dirs := 1
-nasm_url                := https://ftp.osuosl.org/pub/blfs/conglomeration/nasm/$(nasm_tarball)
-nasm_cflags             := -Wno-implicit-fallthrough -std=c11
-
-$(eval $(call package,nasm))

src/Buptvppe/build/external/packages/quicly.mk

-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-quicly_version := 0.1.0-vpp
-quicly_tarball := quicly_$(quicly_version).tar.gz
-quicly_tarball_md5sum := 223f62c4dda7cbb1d907956cafcfd3f0
-quicly_tarball_strip_dirs := 1
-quicly_url := https://github.com/vpp-quic/quicly/releases/download/v$(quicly_version)/quicly_$(quicly_version).tar.gz
-
-picotls_build_dir := $(B)/build-picotls
-
-define  quicly_build_cmds
-	@cd $(quicly_build_dir) && \
-		$(CMAKE) -DWITH_DTRACE=OFF -DCMAKE_INSTALL_PREFIX:PATH=$(quicly_install_dir) \
-		$(quicly_src_dir) > $(quicly_build_log)
-	@$(MAKE) $(MAKE_ARGS) -C $(quicly_build_dir) > $(quicly_build_log)
-
-	@mkdir -p $(picotls_build_dir)
-	@cd $(picotls_build_dir) && \
-		$(CMAKE) -DWITH_DTRACE=OFF -DCMAKE_INSTALL_PREFIX:PATH=$(quicly_install_dir) \
-		$(quicly_src_dir)/deps/picotls > $(quicly_build_log)
-endef
-
-define  quicly_config_cmds
-	@true
-endef
-
-define  quicly_install_cmds
-	@$(MAKE) $(MAKE_ARGS) -C $(quicly_build_dir) install > $(quicly_install_log)
-	@$(MAKE) $(MAKE_ARGS) -C $(picotls_build_dir) install > $(quicly_install_log)
-endef
-
-
-$(eval $(call package,quicly))

src/Buptvppe/build/external/patches/README

-
-Changes needed to DPDK are stored here as git patch files. Maintaining these
-files using “git format-patch” and “git am” will make it simpler to manage
-these changes. Patches made to DPDK should only be temporary until they are
-accepted upstream and made available in the next DPDK release.
-
-The following is the method used to generate these patches:
-
-1. Git clone the package to a new directory:
- # git clone http://dpdk.org/git/dpdk dpdk
-
-2. Create a branch based on the release you wish to patch.
-Note, “git tag” will show you all the release tags. The following example is
-for release tag “v2.2.0” and will create a branch named “two_dot_two”.
- # cd <root dir>
- # git checkout -b two_dot_two v2.2.0
-
-3. Apply all the existing patches to this new branch.
- # git am </path/to/existing/patches/*>
-
-4. Make your changes and commit your change to your repository.
- # <edit files>
- # git commit -s
-
-5. Create the patch files with format-patch. This creates all the patch files
-for your branch (two_dot_two), with your latest commits as the last ones.
- # git format-patch master..two_dot_two
-
-6. Copy, add and commit the new patches into the patches directory.
-

src/Buptvppe/compile.sh

-#!/bin/bash
-
-make rebuild;

src/Buptvppe/config.yaml

-vpp:
-  ueip: 192.169.0.0
-  len: 24
-  inter: enp5s0
-  nat: 192.168.2.115