init buptvppe

src/Buptvppe/1

+unix {
+  nodaemon
+  log /var/log/upf/vpp/vpp.log
+  full-coredump
+  gid vpp
+  interactive
+  cli-listen /run/vpp/cli.sock
+  #cli-listen localhost:5002
+  #exec @/work/gtpu_ext/vpp_0618/config_system.sh@
+  #exec upf_gateway.sh
+  #exec /work/gtpu_ext/upf_v0.4/upf-vpp/conf/config_system.sh
+  exec  test_iperf3.sh
+  logsize 100
+}
+#
+api-trace {
+   on
+  #save-api-table /tmp/save_api_table
+}
+
+api-segment {
+   gid vpp
+}
+
+#
+cpu {
+	## In the VPP there is one main thread and optionally the user can create worker(s)
+	## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
+
+	## Manual pinning of thread(s) to CPU core(s)
+
+	## Set logical CPU core where main thread runs, if main core is not set
+	## VPP will use core 1 if available
+	main-core 3
+
+        ## Set logical CPU core(s) where worker threads are running  
+        #corelist-workers 4-6
+        
+        #corelist-io 5,6
+
+	## Automatic pinning of thread(s) to CPU core(s)
+
+	## Sets number of CPU core(s) to be skipped (1 ... N-1)
+	## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
+	## The main thread is automatically pinned to the first available CPU core and worker(s)
+	## are pinned to next free CPU core(s) after core assigned to main thread
+	# skip-cores 4
+
+	## Specify a number of workers to be created
+	## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
+	## and main thread's CPU core
+	#workers 2
+
+	## Set scheduling policy and priority of main and worker threads
+
+	## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
+	## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
+	scheduler-policy fifo
+
+	## Scheduling priority is used only for "real-time policies (fifo and rr),
+	## and has to be in the range of priorities supported for a particular policy
+	scheduler-priority 50
+}
+
+#buffers {
+	## Increase number of buffers allocated, needed only in scenarios with
+	## large number of interfaces and worker threads. Value is per numa node.
+	## Default is 16384 (8192 if running unpriviledged)
+ #   buffers-per-numa 128000
+
+	## Size of buffer data area
+	## Default is 2048
+#	default data-size 20480
+# }
+dpdk {
+	## Change default settings for all interfaces
+	dev default {
+		## Number of receive queues, enables RSS
+		## Default is 1
+		num-rx-queues 1
+
+		## Number of transmit queues, Default is equal
+		## to number of worker threads or 1 if no workers treads
+		num-tx-queues 1
+
+		## Number of descriptors in transmit and receive rings
+		## increasing or reducing number can impact performance
+		## Default is 1024 for both rx and tx
+		# num-rx-desc 512
+		# num-tx-desc 512
+
+		## VLAN strip offload mode for interface
+		## Default is off
+		# vlan-strip-offload on
+	}
+
+	## Whitelist specific interface by specifying PCI address
+	
+        #82576 1Gg
+
+        dev  0000:06:00.0
+        dev  0000:06:00.1
+
+        #dev 0000:05:00.1
+
+ 	## Whitelist specific interface by specifying PCI address and in
+	## addition specify custom parameters for this interface
+	# dev 0000:02:00.1 {
+	#	num-rx-queues 2
+	# }
+
+	## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci,
+	## uio_pci_generic or auto (default)
+	# uio-driver vfio-pci
+	uio-driver igb_uio
+
+	## Disable multi-segment buffers, improves performance but
+	## disables Jumbo MTU support
+	#no-multi-seg
+
+	## Change hugepages allocation per-socket, needed only if there is need for
+	## larger number of mbufs. Default is 256M on each detected CPU socket
+	socket-mem 2048,2048
+
+	## Disables UDP / TCP TX checksum offload. Typically needed for use
+	## faster vector PMDs (together with no-multi-seg)	
+        #no-tx-checksum-offload
+}
+
+plugins {
+    path   /work/gtpu_ext/upf_v0.4/upf-vpp/src/Buptvppe/build-root/install-vpp_debug-native/vpp/lib/vpp_plugins/
+    plugin dpdk_plugin.so { enable }
+    plugin gtpu_plugin.so { enable }
+    plugin upf_plugin.so  { enable }
+}

src/Buptvppe/INFO.yaml

+---
+project: 'vpp'
+project_creation_date: '2015-12-08'
+project_category: ''
+lifecycle_state: 'Incubation'
+project_lead: &vpp_ptl
+    name: 'Dave Barach'
+    email: 'openvpp@barachs.net'
+    id: 'dbarach'
+    company: ''
+    timezone: ''
+primary_contact: *vpp_ptl
+issue_tracking:
+    type: 'jira'
+    url: 'https://jira.fd.io/projects/vpp'
+    key: 'VPP'
+mailing_list:
+    type: 'groups.io'
+    url: 'https://lists.fd.io/g/vpp-dev'
+    tag: '<[sub-project_name]>'
+realtime_discussion:
+    type: 'irc'
+    server: 'freenode.net'
+    channel: 'fdio-vpp'
+meetings:
+    - type: 'zoom'
+      agenda: 'n/a'
+      url: 'https://wiki.fd.io/view/VPP/Meeting'
+      server: 'n/a'
+      channel: 'fdio-vpp'
+      repeats: 'weekly'
+      time: '08:00 PT'
+repositories:
+    - 'vpp'
+committers:
+    - <<: *vpp_ptl
+    - name: 'Keith Burns'
+      company: 'gmail'
+      email: 'alagalah@gmail.com'
+      id: 'alagalah'
+      timezone: ''
+    - name: 'Chris Luke'
+      company: 'comcast'
+      email: 'chris_luke@comcast.com'
+      id: 'chrisluke'
+      timezone: ''
+    - name: 'Dave Barach'
+      company: 'barachs'
+      email: 'openvpp@barachs.net'
+      id: 'dbarach'
+      timezone: ''
+    - name: 'Damjan Marion'
+      company: 'cisco'
+      email: 'damarion@cisco.com'
+      id: 'dmarion'
+      timezone: ''
+    - name: 'Dave Wallace'
+      company: 'gmail'
+      email: 'dwallacelf@gmail.com'
+      id: 'dwallacelf'
+      timezone: ''
+    - name: 'Florin Coras'
+      company: 'gmail'
+      email: 'florin.coras@gmail.com'
+      id: 'florin.coras'
+      timezone: ''
+    - name: 'Ed Warnicke'
+      company: 'gmail'
+      email: 'hagbard@gmail.com'
+      id: 'hagbard'
+      timezone: ''
+    - name: 'John Lo'
+      company: 'cisco'
+      email: 'loj@cisco.com'
+      id: 'lojohn'
+      timezone: ''
+    - name: 'Marco Varlese'
+      company: 'suse'
+      email: 'marco.varlese@suse.de'
+      id: 'marco.varlese'
+      timezone: ''
+    - name: 'Neale Ranns'
+      company: 'cisco'
+      email: 'nranns@cisco.com'
+      id: 'nranns'
+      timezone: ''
+    - name: 'Ole Trøan'
+      company: 'employees'
+      email: 'otroan@employees.org'
+      id: 'otroan'
+      timezone: ''
+    - name: 'Sergio Gonzalez Monroy'
+      company: 'outlook'
+      email: 'sergio.gonzalez.monroy@outlook.com'
+      id: 'smonroy'
+      timezone: ''
+tsc:
+    # yamllint disable rule:line-length
+    approval: ''
+    changes:
+        - type: 'removal'
+          name: ''
+          link: ''
+        - type: 'promotion'
+          name: ''
+          link: ''

src/Buptvppe/README-VPP.md

+Vector Packet Processing
+========================
+
+## Introduction
+
+The VPP platform is an extensible framework that provides out-of-the-box
+production quality switch/router functionality. It is the open source version
+of Cisco's Vector Packet Processing (VPP) technology: a high performance,
+packet-processing stack that can run on commodity CPUs.
+
+The benefits of this implementation of VPP are its high performance, proven
+technology, its modularity and flexibility, and rich feature set.
+
+For more information on VPP and its features please visit the
+[FD.io website](http://fd.io/) and
+[What is VPP?](https://wiki.fd.io/view/VPP/What_is_VPP%3F) pages.
+
+
+## Changes
+
+Details of the changes leading up to this version of VPP can be found under
+@ref release_notes.
+
+
+## Directory layout
+
+| Directory name         | Description                                 |
+| ---------------------- | ------------------------------------------- |
+|      build-data        | Build metadata                              |
+|      build-root        | Build output directory                      |
+|      doxygen           | Documentation generator configuration       |
+|      dpdk              | DPDK patches and build infrastructure       |
+| @ref extras/libmemif   | Client library for memif                    |
+| @ref src/examples      | VPP example code                            |
+| @ref src/plugins       | VPP bundled plugins directory               |
+| @ref src/svm           | Shared virtual memory allocation library    |
+|      src/tests         | Standalone tests (not part of test harness) |
+|      src/vat           | VPP API test program                        |
+| @ref src/vlib          | VPP application library                     |
+| @ref src/vlibapi       | VPP API library                             |
+| @ref src/vlibmemory    | VPP Memory management                       |
+| @ref src/vnet          | VPP networking                              |
+| @ref src/vpp           | VPP application                             |
+| @ref src/vpp-api       | VPP application API bindings                |
+| @ref src/vppinfra      | VPP core library                            |
+| @ref src/vpp/api       | Not-yet-relocated API bindings              |
+|      test              | Unit tests and Python test harness          |
+
+## Getting started
+
+In general anyone interested in building, developing or running VPP should
+consult the [VPP wiki](https://wiki.fd.io/view/VPP) for more complete
+documentation.
+
+In particular, readers are recommended to take a look at [Pulling, Building,
+Running, Hacking, Pushing](https://wiki.fd.io/view/VPP/Pulling,_Building,_Run
+ning,_Hacking_and_Pushing_VPP_Code) which provides extensive step-by-step
+coverage of the topic.
+
+For the impatient, some salient information is distilled below.
+
+
+### Quick-start: On an existing Linux host
+
+To install system dependencies, build VPP and then install it, simply run the
+build script. This should be performed a non-privileged user with `sudo`
+access from the project base directory:
+
+    ./extras/vagrant/build.sh
+
+If you want a more fine-grained approach because you intend to do some
+development work, the `Makefile` in the root directory of the source tree
+provides several convenience shortcuts as `make` targets that may be of
+interest. To see the available targets run:
+
+    make
+
+
+### Quick-start: Vagrant
+
+The directory `extras/vagrant` contains a `VagrantFile` and supporting
+scripts to bootstrap a working VPP inside a Vagrant-managed Virtual Machine.
+This VM can then be used to test concepts with VPP or as a development
+platform to extend VPP. Some obvious caveats apply when using a VM for VPP
+since its performance will never match that of bare metal; if your work is
+timing or performance sensitive, consider using bare metal in addition or
+instead of the VM.
+
+For this to work you will need a working installation of Vagrant. Instructions
+for this can be found [on the Setting up Vagrant wiki page]
+(https://wiki.fd.io/view/DEV/Setting_Up_Vagrant).
+
+
+## More information
+
+Several modules provide documentation, see @subpage user_doc for more
+end-user-oriented information. Also see @subpage dev_doc for developer notes.
+
+Visit the [VPP wiki](https://wiki.fd.io/view/VPP) for details on more
+advanced building strategies and other development notes.
+
+
+## Test Framework
+
+There is PyDoc generated documentation available for the VPP test framework.
+See @ref test_framework_doc for details.

src/Buptvppe/README.md

+src/plugins/upf/README.md
\ No newline at end of file

src/Buptvppe/build-data/packages/build.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.

src/Buptvppe/build-data/packages/external.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+external_source = build
+
+ifneq (,$(findstring debug,$(TAG)))
+	DPDK_DEBUG=y
+else
+	DPDK_DEBUG=n
+endif
+
+DPDK_MAKE_ARGS = -C $(call find_source_fn,$(PACKAGE_SOURCE)) \
+	BUILD_DIR=$(PACKAGE_BUILD_DIR) \
+	INSTALL_DIR=$(PACKAGE_INSTALL_DIR) \
+	DPDK_DEBUG=$(DPDK_DEBUG)
+
+DPDK_MLX5_PMD=$(strip $($(PLATFORM)_uses_dpdk_mlx5_pmd))
+ifneq ($(DPDK_MLX5_PMD),)
+DPDK_MAKE_ARGS += DPDK_MLX5_PMD=y
+endif
+
+DPDK_MLX_IBVERBS_DLOPEN=$(strip $($(PLATFORM)_uses_dpdk_ibverbs_link_dlopen))
+ifneq ($(DPDK_MLX_IBVERBS_DLOPEN),)
+DPDK_MAKE_ARGS += DPDK_MLX_IBVERBS_DLOPEN=y
+endif
+
+DPDK_MLX4_PMD=$(strip $($(PLATFORM)_uses_dpdk_mlx4_pmd))
+ifneq ($(DPDK_MLX4_PMD),)
+DPDK_MAKE_ARGS += DPDK_MLX4_PMD=y
+endif
+
+DPDK_PLATFORM_TARGET=$(strip $($(PLATFORM)_dpdk_target))
+ifneq ($(DPDK_PLATFORM_TARGET),)
+DPDK_MAKE_ARGS += DPDK_TARGET=$(DPDK_PLATFORM_TARGET)
+endif
+
+ifneq (,$(TARGET_PLATFORM))
+DPDK_MAKE_ARGS += DPDK_AARCH64_GENERIC=n
+endif
+
+DPDK_MAKE_EXTRA_ARGS = $(strip $($(PLATFORM)_dpdk_make_extra_args))
+ifneq ($(DPDK_MAKE_EXTRA_ARGS),)
+DPDK_MAKE_ARGS += DPDK_MAKE_EXTRA_ARGS="$(DPDK_MAKE_EXTRA_ARGS)"
+endif
+
+external_configure = echo
+
+external_make_args = $(DPDK_MAKE_ARGS) -C external ebuild-build
+
+external_install =  make $(DPDK_MAKE_ARGS) -C external ebuild-install

src/Buptvppe/build-data/packages/extras.mk

+# empty file

src/Buptvppe/build-data/packages/gmod.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+gmod_configure_depend = vpp-install
+
+gmod_configure_args = --libdir=$(PACKAGE_INSTALL_DIR)/$(arch_lib_dir)/ganglia
+
+gmod_CPPFLAGS = $(call installed_includes_fn, vpp)
+gmod_CPPFLAGS += -I/usr/include/apr-1.0 -I/usr/include/apr-1 -I/usr/include
+gmod_LDFLAGS = $(call installed_libs_fn, vpp)
+
+gmod_image_include = echo $(arch_lib_dir)/ganglia/libgmodvpp.so etc

src/Buptvppe/build-data/packages/libmemif.mk

+# Copyright (c) 2017-2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+libmemif_source = extras
+libmemif_configure_subdir = libmemif
+
+ifneq ($(shell which cmake3),)
+CMAKE?=cmake3
+else
+CMAKE?=cmake
+endif
+
+libmemif_cmake_args ?=
+libmemif_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
+libmemif_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
+libmemif_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
+libmemif_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
+
+# Use devtoolset on centos 7
+ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
+libmemif_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
+endif
+
+libmemif_configure = \
+  cd $(PACKAGE_BUILD_DIR) && \
+  $(CMAKE) -G Ninja $(libmemif_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)
+
+libmemif_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
+
+libmemif_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install

src/Buptvppe/build-data/packages/sample-plugin.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+sample-plugin_source = src
+sample-plugin_configure_subdir = examples/sample-plugin
+sample-plugin_configure_depend = vpp-install
+sample-plugin_CPPFLAGS = $(call installed_includes_fn, vpp)
+sample-plugin_LDFLAGS = $(call installed_libs_fn, vpp)
+sample-plugin_PATH = $(call package_install_dir_fn,vpp)/bin
+
+ifneq ($(shell which cmake3),)
+CMAKE?=cmake3
+else
+CMAKE?=cmake
+endif
+
+sample-plugin_cmake_args ?=
+sample-plugin_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
+sample-plugin_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
+sample-plugin_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
+sample-plugin_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
+
+# Use devtoolset on centos 7
+ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
+sample-plugin_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
+endif
+
+sample-plugin_configure = \
+  cd $(PACKAGE_BUILD_DIR) && \
+  $(CMAKE) -G Ninja $(sample-plugin_cmake_args) \
+  $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)
+
+sample-plugin_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
+
+sample-plugin_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install

src/Buptvppe/build-data/packages/src.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.

src/Buptvppe/build-data/packages/vom.mk

+# Copyright (c) 2017-2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+vom_configure_depend = vpp-install
+vom_source = extras
+vom_configure_subdir = vom
+
+ifneq ($(shell which cmake3),)
+CMAKE?=cmake3
+else
+CMAKE?=cmake
+endif
+
+vom_cmake_args ?=
+vom_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
+vom_cmake_args += -DCMAKE_CXX_FLAGS="$($(TAG)_TAG_CPPFLAGS)"
+vom_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
+vom_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
+
+# Use devtoolset on centos 7
+ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
+vom_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
+endif
+
+vom_configure = \
+  cd $(PACKAGE_BUILD_DIR) && \
+  $(CMAKE) -G Ninja $(vom_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)
+
+vom_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
+
+vom_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install
+
+vom-package-deb: vom-install
+	@$(CMAKE) --build $(PACKAGE_BUILD_DIR)/vom -- package
+	@find $(PACKAGE_BUILD_DIR)/vom -name '*.deb' -exec mv {} $(CURDIR) \;

src/Buptvppe/build-data/packages/vpp.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+vpp_source = src
+
+ifneq ($(shell which cmake3),)
+CMAKE?=cmake3
+else
+CMAKE?=cmake
+endif
+
+vpp_cmake_prefix_path  = /opt/vpp/external/$(shell uname -m)
+vpp_cmake_prefix_path += $(PACKAGE_INSTALL_DIR)external
+vpp_cmake_prefix_path := $(subst $() $(),;,$(vpp_cmake_prefix_path))
+
+vpp_cmake_args ?=
+vpp_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
+vpp_cmake_args += -DCMAKE_BUILD_TYPE="$($(TAG)_TAG_BUILD_TYPE)"
+vpp_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(vpp_cmake_prefix_path)"
+ifeq ("$(V)","1")
+vpp_cmake_args += -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
+endif
+ifeq (,$(TARGET_PLATFORM))
+ifeq ($(MACHINE),aarch64)
+vpp_cmake_args += -DVPP_LOG2_CACHE_LINE_SIZE=7
+endif
+endif
+
+# Use devtoolset on centos 7
+ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
+vpp_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
+endif
+
+ifneq ($(VPP_EXTRA_CMAKE_ARGS),)
+vpp_cmake_args += $(VPP_EXTRA_CMAKE_ARGS)
+endif
+
+vpp_configure_depend += external-install
+vpp_configure = \
+  cd $(PACKAGE_BUILD_DIR) && \
+  $(CMAKE) -G Ninja $(vpp_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))
+#vpp_make_args = --no-print-directory
+vpp_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
+vpp_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install | grep -v 'Set runtime path'
+
+vpp-package-deb: vpp-install
+	@$(CMAKE) --build $(PACKAGE_BUILD_DIR)/vpp -- package-deb
+	@find $(PACKAGE_BUILD_DIR) \
+          -maxdepth 1 \
+          \( -name '*.changes' -o -name '*.deb' -o -name '*.buildinfo' \) \
+          -exec mv {} $(CURDIR) \;

src/Buptvppe/build-data/platforms.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Pick up per-platform makefile fragments
+$(foreach d,$(SOURCE_PATH_BUILD_DATA_DIRS),	\
+  $(eval -include $(d)/platforms/*.mk))
+

src/Buptvppe/build-data/platforms/arm32.mk

+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# vector packet processor
+arm32_arch = native
+arm32_native_tools = vppapigen
+
+arm32_uses_dpdk = yes
+arm32_uses_openssl = no
+
+arm32_root_packages = vpp vlib vlib-api vnet svm vpp-api-test \
+	gmod
+
+vlib_configure_args_arm32 = --with-pre-data=128
+vnet_configure_args_arm32 = --with-dpdk --without-libssl
+vpp_configure_args_arm32 = --with-dpdk --without-libssl
+
+arm32_dpdk_arch = "armv7a"
+arm32_dpdk_target = "arm-armv7a-linuxapp-gcc"
+arm32_dpdk_make_extra_args = "CPU_CFLAGS='-mfloat-abi=hard' \
+	CONFIG_RTE_EAL_IGB_UIO=y \
+	CONFIG_RTE_LIBRTE_E1000_PMD=y \
+	CONFIG_RTE_MAX_LCORE=4 \
+	CONFIG_RTE_MAX_NUMA_NODES=1"
+
+
+arm32_debug_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
+	-fstack-protector-all -fPIC -Werror
+arm32_debug_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
+	-fstack-protector-all -fPIC -Werror
+
+arm32_TAG_CFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
+	-fstack-protector -fPIC -Werror
+arm32_TAG_LDFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
+	-fstack-protector -fPIC -Werror

src/Buptvppe/build-data/platforms/dpaa.mk

+# Copyright 2018 NXP
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Configuration for NXP DPAA1/DPAA2 ARM64 based platform
+MACHINE=$(shell uname -m)
+
+dpaa_mtune = cortex-A72
+dpaa_march = "armv8-a+fp+simd+crc+crypto"
+
+ifeq ($(MACHINE),aarch64)
+dpaa_arch = native
+else
+dpaa_arch = aarch64
+dpaa_os = linux-gnu
+dpaa_target = aarch64-fsl-linux
+dpaa_cross_ldflags = \
+	-Wl,--dynamic-linker=/lib/ld-linux-aarch64.so.1 \
+	-Wl,-rpath=/usr/lib64 \
+	-Wl,-rpath=./.libs \
+	-Wl,-rpath=$(OPENSSL_PATH)/lib
+endif
+
+# Re-write Default configuration, if requied
+ifneq ($(CROSS_PREFIX),)
+# like: aarch64-linux-gnu
+dpaa_target = $(CROSS_PREFIX)
+endif
+
+ifneq ($(CPU_MTUNE),)
+# like: cortex-A53
+dpaa_mtune = $(CPU_MTUNE)
+endif
+
+dpaa_native_tools = vppapigen
+dpaa_root_packages = vpp
+
+# DPDK configuration parameters
+dpaa_uses_dpdk = yes
+
+# Compile with external DPDK only if "DPDK_PATH" variable is defined where we have
+# installed DPDK libraries and headers.
+ifeq ($(PLATFORM),dpaa)
+ifneq ($(DPDK_PATH),)
+#dpaa_dpdk_shared_lib = yes
+dpaa_uses_external_dpdk = yes
+dpaa_dpdk_inc_dir = $(DPDK_PATH)/include/dpdk
+dpaa_dpdk_lib_dir = $(DPDK_PATH)/lib
+else
+# compile using internal DPDK + NXP DPAA2 Driver patch
+dpaa_dpdk_arch = "armv8a"
+dpaa_dpdk_target = "arm64-dpaa-linuxapp-gcc"
+dpaa_dpdk_make_extra_args = "CONFIG_RTE_KNI_KMOD=n"
+endif
+endif
+
+# Disable the unused plugins in order to decrease the VPP pacakage size.
+vpp_configure_args_dpaa = --without-ipv6sr --with-pre-data=128 --without-libnuma
+
+# Other optional vpp_configure_args
+ifneq ($(VPP_CFG_ARGS),)
+vpp_configure_args_dpaa += $(VPP_CFG_ARGS)
+endif
+
+
+dpaa_debug_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -fPIC -fstack-protector-all -DFORTIFY_SOURCE=2 -mtls-dialect=trad \
+			-march=$(MARCH) -Werror -DCLIB_LOG2_CACHE_LINE_BYTES=6 -I$(OPENSSL_PATH)/include
+dpaa_debug_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -fstack-protector-all -DFORTIFY_SOURCE=2 \
+			-march=$(MARCH) -Werror -DCLIB_LOG2_CACHE_LINE_BYTES=6 -L$(OPENSSL_PATH)/lib
+
+
+# Use -rdynamic is for stack tracing, O0 for debugging....default is O2
+# Use -DCLIB_LOG2_CACHE_LINE_BYTES to change cache line size
+dpaa_TAG_CFLAGS = -g -Ofast -fPIC -march=$(MARCH) -mcpu=$(dpaa_mtune) -mtls-dialect=trad \
+		-mtune=$(dpaa_mtune) -funroll-all-loops -DCLIB_LOG2_CACHE_LINE_BYTES=6 -I$(OPENSSL_PATH)/include
+dpaa_TAG_LDFLAGS = -g -Ofast -fPIC -march=$(MARCH) -mcpu=$(dpaa_mtune) \
+		-mtune=$(dpaa_mtune) -funroll-all-loops -DCLIB_LOG2_CACHE_LINE_BYTES=6 -L$(OPENSSL_PATH)/lib
+

src/Buptvppe/build-data/platforms/qppc.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Qemu "p-series" powerpc64 
+
+qppc_os = linux-gnu
+
+qppc_cross_ldflags = \
+    -Wl,--dynamic-linker=/lib64/ld64.so.1
+
+qppc_arch = powerpc
+
+qppc_root_packages = vppinfra vlib vlib-api vnet svm \
+	vpp vpp-api-test
+
+vnet_configure_args_qppc = \
+	--without-libssl
+
+vpp_configure_args_qppc = \
+	--without-libssl
+
+vlib_configure_args_qppc = --with-pre-data=128
+
+qppc_march=powerpc64
+
+# native tool chain additions for this platform
+qppc_native_tools = vppapigen
+
+qppc_uses_dpdk = no
+
+qppc_debug_TAG_CFLAGS = -m64 -g -O0 -DCLIB_DEBUG -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
+qppc_debug_TAG_LDFLAGS = -m64 -g -O0 -DCLIB_DEBUG -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
+
+qppc_TAG_CFLAGS = -m64 -g -O2 -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
+qppc_TAG_LDFLAGS = -m64 -g -O2 -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
+
+

src/Buptvppe/build-data/platforms/vpp.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# vector packet processor
+
+MACHINE=$(shell uname -m)
+
+vpp_arch = native
+ifeq ($(TARGET_PLATFORM),thunderx)
+vpp_dpdk_target = arm64-thunderx-linuxapp-gcc
+endif
+
+vpp_root_packages = vpp vom
+
+vpp_debug_TAG_BUILD_TYPE = debug
+vpp_TAG_BUILD_TYPE = release
+vpp_clang_TAG_BUILD_TYPE = release
+vpp_gcov_TAG_BUILD_TYPE = gcov
+vpp_coverity_TAG_BUILD_TYPE = coverity

src/Buptvppe/build-root/autowank

+#!/bin/bash
+
+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This aptly-named script verifies and fixes time ordering
+# problems with Makefile.{am,in} aclocal.m4 configure* files.
+
+set -eu
+#set -vx
+
+touch=""
+commit=""
+comma_v=""
+aclocal=""
+optimize=""
+
+# The old autowank scheme used "touch <foo> ; sleep 1"
+# to ensure differentiable, ordered timestamps. Worked, but
+# took N seconds given N files to fix. We have an example
+# which wastes multiple minutes given the old scheme.
+#
+# This version generates a sequence of timestamps 
+# starting an hour ago. That gives us
+# lots to play with, in case some obnoxious program feels the need
+# to complain about timestamps in the future.
+
+# If we're in UTC+N land, generate UTC+(N+1) 
+# If we're in UTC-N land, generate UTC-(N-1)
+
+my_tz=`date +%z`
+sign=`echo $my_tz | sed -n -e 's/^\(.\{1\}\).*$/\1/p'`
+t=`echo $my_tz | sed -n -e 's/^\(.\{1\}\)//p'`
+tz_hour=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
+tz_hour=`echo $tz_hour | sed 's/^0//'`
+
+if [ $sign = "-" ] ; then
+    sign="+"
+    let tz_hour=$tz_hour+1
+    if [[ $tz_hour -ge "24" ]] ; then
+        tz_hour=0
+    fi
+else
+    sign="-"
+    let tz_hour=$tz_hour-1 || true
+    if [[ $tz_hour -lt "0" ]] ; then
+        tz_hour=23
+    fi
+fi
+
+# Timestamp, an hour ago:
+ts_begin=`TZ=UTC${sign}${tz_hour} date +%Y%m%d%H%M.%S`
+
+# break into constituent parts
+year=`echo $ts_begin | sed -n -e 's/^\(.\{4\}\).*$/\1/p'`
+t=`echo $ts_begin | sed -n -e 's/^\(.\{4\}\)//p'`
+month=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
+t=`echo $t | sed -n -e 's/^\(.\{2\}\)//p'`
+day=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
+t=`echo $t | sed -n -e 's/^\(.\{2\}\)//p'`
+hour=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
+t=`echo $t | sed -n -e 's/^\(.\{2\}\)//p'`
+min=`echo $t | sed -n -e 's/^\(.\{2\}\).*$/\1/p'`
+t=`echo $t | sed -n -e 's/^\(.\{2\}\)//p'`
+sec=`echo $t | sed -n -e 's/\.//p'`
+
+# How many days in the current month?
+# Good until someone changes the calendar rules
+days_in_current_month() {
+    if [[ $month -eq 9 || $month -eq 4 \
+        || $month -eq 6 || $month -eq 11 ]] ; then
+	return 30;
+    fi
+    if [[ $month -eq 2 ]] ; then
+	let t=($year/400)*400
+	if [[ $t -eq $year ]] ; then
+	    return 29;
+	fi
+	let t=($year/100)*100
+	if [[ $t -eq $year ]] ; then
+	    return 28;
+	fi
+	let t=($year/4)*4
+	if [[ $t -eq $year ]] ; then
+	    return 29;
+	fi
+	return 28;
+    fi
+    return 31;
+}
+
+# The next timestamp to issue via touch
+# A real hemorrhoid because bash isnt easily convinced
+# that 08 is a decimal number
+next_ts() {
+    sec=`echo $sec | sed 's/^0//'`
+    let sec=$sec+1
+    if [[ "$sec" -lt "60" ]] ; then
+        if [[ "$sec" -lt "10" ]] ; then
+            sec=0$sec
+        fi
+	return 0;
+    fi
+    sec="00"
+    min=`echo $min | sed 's/^0//'`
+    let min=$min+1
+    if [[ "$min" -lt "60" ]] ; then
+        if [[ "$min" -lt "10" ]] ; then
+            min=0$min
+        fi
+	return 0;
+    fi
+    min="00"
+    hour=`echo $hour | sed 's/^0//'`
+    let hour=$hour+1
+    if [[ "$hour" -lt "24" ]] ; then
+        if [[ "$hour" -lt "10" ]] ; then
+            hour=0$hour
+        fi
+	return 0;
+    fi
+    hour="00"
+    days_in_current_month
+    days_in_month=$?
+    if [[ "$day" -lt "$days_in_month" ]] ; then
+        day=`echo $day | sed 's/^0//'`
+	let day=$day+1
+        if [[ "$day" -lt "10" ]] ; then
+            day=0$day
+        fi
+	return 0;
+    fi
+    day="01"
+    month=`echo $month | sed 's/^0//'`
+    let month=$month+1
+    if [[ "$month" -lt "13" ]] ; then
+        if [[ "$month" -lt "10" ]] ; then
+            month=0$month
+        fi
+	return 0;
+    fi
+    month="01"
+    let year=$year+1
+    return 0;
+}
+
+while [ $# != 0 ] ; do
+  case "$1" in
+    (--commav) comma_v=",v" ;;
+    (--touch) touch=yes ;;
+    (--aclocal) aclocal=yes ;;
+    (--nooptimize) optimize="" ;;
+    (--commit=*) commit="$1" ;;
+    (*) echo "$0: usage [--touch|--commit|]" > /dev/stderr
+        exit 17 ;;
+  esac
+  shift
+done
+
+if [ "${aclocal}" != "" ] ; then
+    if [ -f aclocal.m4 ] ; then
+        echo touching aclocal.m4
+        sleep 1
+        touch aclocal.m4
+    else
+        echo aclocal.m4 not found
+    fi
+fi
+
+if [ "${comma_v}" != "" -a "${commit}" != "" ] ; then
+  echo "No, you may NOT molest ,v files directly.  Go away." > /dev/stderr
+  exit 1
+fi
+
+function touchme ()
+{
+  local victim="${1}"
+  shift
+  local touchmebaby=""
+  local sein="is"
+  local newer="no"
+  local older="no"
+
+  if [ ! -r "$victim" ] ; then
+    return
+  fi
+
+  while [ $# != 0 ] ; do
+    if [ "${1}" -nt "${victim}" ] ; then
+        newer="yes"
+    fi
+    if [ "${1}" -ot "${victim}" ] ; then
+        older="yes"
+    fi
+    if [ "${newer}" = "no" -a "${older}" = "no" ] ; then
+        newer="yes"
+    fi
+
+    if [ "${newer}" = "yes" ] ; then
+      if [ "${touchmebaby}" = "" ] ; then
+        touchmebaby="${1}"
+      else
+        sein="are"
+        touchmebaby="${touchmebaby} ${1}"
+      fi
+    fi
+    shift
+  done
+  if [ -n "${touchmebaby}" ] ; then
+    echo "*** ${touchmebaby} ${sein} newer than ${victim}  "
+    if [ -n "${touch}" ] ; then
+      # 
+      # This is the old version, in case something backfires...
+      if [ "${optimize}" != "yes" ] ; then 
+          echo "Fixing " ;touch -c "$victim" ; sleep 1
+      else
+          echo "Fixing "
+      # echo touch -c -t $year$month$day$hour$min.$sec "$victim"
+          touch -c -t $year$month$day$hour$min.$sec "$victim"
+          next_ts
+      fi
+    fi
+  fi
+}
+
+makefileins="`/usr/bin/find . -name Attic -prune -o -name Makefile.in${comma_v}`"
+
+# aclocal.m4 depends on ***/Makefile.am, configure.ac, acinclude.m4, *.m4 crap
+touchme aclocal.m4${comma_v} \
+        `/usr/bin/find . -name Attic -prune -o -name Makefile.am${comma_v}` \
+        "configure.in${comma_v}" "configure.ac${comma_v}" \
+        "acinclude.m4${comma_v}"
+
+# Makefile.in must be newer than Makefile.am
+for f in $makefileins ; do
+  d="`dirname ${f}`"
+  touchme "${d}/Makefile.in${comma_v}" "${d}/Makefile.am${comma_v}"
+done
+
+# Makefile.in depends on aclocal.m4
+for f in $makefileins ; do
+  d="`dirname $f`"
+  touchme "${d}/Makefile.in${comma_v}" "aclocal.m4${comma_v}"
+done
+
+# config.in must be newer than aclocal.m4 and configure.ac
+if [ -f "config.in${comma_v}" ] ; then
+  touchme "config.in${comma_v}" "aclocal.m4${comma_v}" \
+                                "configure.ac${comma_v}" \
+                                "configure.in${comma_v}"
+fi
+
+# config.h.in (or More Thoroughly Modern configh.in)
+# must be newer than aclocal.m4 and (obsolete) acconfig.h
+for c_h_in in config.h.in configh.in ; do
+  if [ -f "${c_h_in}${comma_v}" ]; then
+    touchme "${c_h_in}${comma_v}" "aclocal.m4${comma_v}" "acconfig.h${comma_v}"
+    #>>>> WTF?  Why?  This is nonsensical
+    ## ***/Makefile.in must be newer than config.h.in
+    #for f in $makefileins ; do
+    #  touchme "$f" "${c_h_in}${comma_v}"
+    #done
+  fi
+done
+
+# configure must be newer than everything
+# touchme configure $makefileins -- why would this be needed?
+touchme "configure${comma_v}" "aclocal.m4${comma_v}" "acconfig.h${comma_v}" \
+                              "config.in${comma_v}" "config.h.in${comma_v}" \
+                              "configh.in${comma_v}"
+
+if [ -n "${commit}" ] ; then
+  commit="${commit:9}" # strip off "--commit="
+  # First ***/Makefile.am,
+  # configure.in, configure.ac,
+  # ***/*.m4
+  # acconfig.h
+  cvs commit -m "${commit}" \
+             `for f in ${makefileins} ; do \
+                [ -f "$${f%.in}.am" ] && echo "$${f%.in}.am" ; \
+              done` \
+             `[ -f configure.in ] && echo configure.in` \
+             `[ -f configure.ac ] && echo configure.ac` \
+             `[ -f acconfig.h ] && echo acconfig.h` \
+             `/usr/bin/find . -name '*.m4' -mindepth 2`
+
+  # Next aclocal.m4
+  [ -f "aclocal.m4" ] && cvs commit -m "${commit}" aclocal.m4
+
+  # Next config.in, config.h.in, configh.in
+  [ -f "config.in" ] && cvs commit -m "${commit}" config.in
+  [ -f "config.h.in" ] && cvs commit -m "${commit}" config.h.in
+  [ -f "configh.in" ] && cvs commit -m "${commit}" configh.in
+
+  # Last ***/Makefile.in, configure
+  cvs commit -m "${commit}" ${makefileins} configure
+fi

src/Buptvppe/build-root/build-config.mk

+SOURCE_PATH = $(CURDIR)/..

src/Buptvppe/build-root/build-config.mk.README

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# To specify directories to find sources, build/packages/*.mk
+# and build/platforms.mk
+# SOURCE_PATH = PATH1 PATH2 ...

src/Buptvppe/build-root/config.site

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+######################################################################
+# glibc
+######################################################################
+
+# glibc needs this for cross compiling 
+libc_cv_forced_unwind=yes
+libc_cv_c_cleanup=yes
+libc_cv_ssp=no
+# fixes gentoo build; not sure why?
+libc_cv_uname_release=""
+libc_cv_uname_version=""
+ac_cv_header_cpuid_h=yes
+######################################################################
+# bash
+######################################################################
+
+# Bash configure.in uses this to work around an autoconf 2.53 bug
+ac_cv_func_setvbuf_reversed=no
+ac_cv_rl_version=5.1
+bash_cv_termcap_lib=libncurses
+
+# These mostly come from debian bash-2.05b changes
+# They are needed to make a functioning bash.  Without these
+# settings gdbserver exiting would cause the invoking bash to
+# exit also.
+bash_cv_have_mbstate_t=yes
+bash_cv_dup2_broken=no
+bash_cv_pgrp_pipe=no
+bash_cv_sys_siglist=yes
+bash_cv_under_sys_siglist=yes
+bash_cv_opendir_not_robust=no
+bash_cv_printf_declared=yes
+bash_cv_ulimit_maxfds=yes
+bash_cv_getenv_redef=yes
+bash_cv_getcwd_calls_popen=no
+bash_cv_func_strcoll_broken=no
+bash_cv_must_reinstall_sighandlers=no
+bash_cv_type_quad_t=yes
+bash_cv_func_sigsetjmp=present
+bash_cv_job_control_missing=present
+bash_cv_sys_named_pipes=present
+bash_cv_type_rlimit=long
+bash_cv_printf_a_format=yes
+bash_cv_unusable_rtsigs=no
+
+######################################################################
+# Apache
+######################################################################
+ac_cv_func_setpgrp_void=yes
+apr_cv_process_shared_works=yes
+apr_cv_tcp_nodelay_with_cork=yes
+ap_void_ptr_lt_long=no
+
+case ${host_cpu} in
+x86_64 | alpha)
+  ac_cv_sizeof_ssize_t=8
+  ac_cv_sizeof_size_t=8
+  ac_cv_sizeof_pid_t=4
+  ;;
+*)
+  ac_cv_sizeof_ssize_t=4
+  ac_cv_sizeof_size_t=4
+  ac_cv_sizeof_pid_t=4
+  ;;
+esac
+
+######################################################################
+# gdb
+######################################################################
+gdb_cv_func_ptrace_args=int,int,long,long
+
+######################################################################
+# dpkg
+######################################################################
+dpkg_cv_va_copy=yes
+
+######################################################################
+# coreutils
+######################################################################
+ac_cv_search_clock_gettime=no
+gl_cv_fs_space=yes
+
+######################################################################
+# tcpdump
+######################################################################
+ac_cv_linux_vers=2
+ac_cv_func_pcap_findalldevs=no
+
+######################################################################
+# flex
+######################################################################
+ac_cv_func_malloc_0_nonnull=yes
+ac_cv_func_realloc_0_nonnull=yes
+
+######################################################################
+# tar
+######################################################################
+tar_gl_cv_func_mknod_works=yes

src/Buptvppe/build-root/copyimg

+#!/bin/sh
+
+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+if [ $# -lt 2 ]; then
+    cat - <<EOF
+$0 FROM-DIR TO-DIR ENVIRONMENT
+
+Copies files from one directory to another with possible
+transformations.
+
+Files named FILE.spp will be transformed via the spp preprocessor
+subject to environment definitions.  Source FILE.copyimgspp results in
+destination file FILE in the corresponding destination directory.
+
+Files named FILE.copyimgsh are run as shell scripts in (i.e. via chdir)
+the corresponding destination directory (and not copied).
+
+First regular files are copied.  Then transformations are preformed.
+Finally, shell scripts are run.
+EOF
+  exit 1;
+fi
+
+FROM_DIR=$1
+TO_DIR=$2
+
+FILTER=" -and -not -name '*~'";
+FILTER="${FILTER} -and -not -name '.*~'";
+FILTER="$FILTER -and -not -path '*/.git*'";
+FILTER="$FILTER -and -not -path '*/.svn*'";
+FILTER="$FILTER -and -not -path '*/.CVS*'";
+
+FROM_FILES=`(cd $FROM_DIR; eval "find . -not -type d $FILTER")`;
+ FROM_DIRS=`(cd $FROM_DIR; eval "find .      -type d $FILTER")`;
+
+COPY_FILES=
+SPP_FILES=
+SH_FILES=
+for f in $FROM_FILES; do
+  case $f in
+    *.copyimgspp) SPP_FILES="$SPP_FILES $f" ;;
+    *.copyimgsh)   SH_FILES="$SH_FILES $f" ;;
+    *)		 COPY_FILES="$COPY_FILES $f";;
+  esac
+done
+
+# Make destination directories.
+mkdir -p $TO_DIR;
+if [ "$FROM_DIRS" != "" ]; then
+  for d in $FROM_DIRS; do
+    mkdir -p $TO_DIR/$d;
+  done
+fi
+
+# Copy files
+if [ "$COPY_FILES" != "" ]; then
+    tar -cf - -C $FROM_DIR $COPY_FILES | tar --preserve-permissions -xf - -C $TO_DIR;
+fi
+
+# Use spp to transform any spp files
+if [ "$SPP_FILES" != "" ]; then
+  for f in $SPP_FILES; do
+    d=`dirname $f`;
+    b=`basename $f .copyimgspp`;
+    mkdir -p $TO_DIR/$d;
+    t=$TO_DIR/$d/$b;
+    spp -o $TO_DIR/$d/$b $FROM_DIR/$f || exit 1;
+  done;
+fi
+
+# Now that all files have been copied/created we run any shell scripts
+ABS_FROM_DIR=`(cd $FROM_DIR; pwd)`;
+if [ "$SH_FILES" != "" ]; then
+  # Allow directory to define some functions
+  if [ -f $FROM_DIR/copyimgsh-functions.sh ]; then
+    . $FROM_DIR/copyimgsh-functions.sh ;
+  fi ;
+  for f in $SH_FILES; do
+    d=`dirname $f`;
+    b=`basename $f`;
+    mkdir -p $TO_DIR/$d;
+    (cd $TO_DIR/$d; . $ABS_FROM_DIR/$d/$b) || exit 1;
+  done;
+fi;

src/Buptvppe/build-root/platforms.mk

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#
+# Copyright (c) 2007-2008 Eliot Dresselhaus
+#
+#  Permission is hereby granted, free of charge, to any person obtaining
+#  a copy of this software and associated documentation files (the
+#  "Software"), to deal in the Software without restriction, including
+#  without limitation the rights to use, copy, modify, merge, publish,
+#  distribute, sublicense, and/or sell copies of the Software, and to
+#  permit persons to whom the Software is furnished to do so, subject to
+#  the following conditions:
+#
+#  The above copyright notice and this permission notice shall be
+#  included in all copies or substantial portions of the Software.
+#
+#  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+#  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+#  NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+#  LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+#  OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+#  WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+
+# Platform selects e.g. Linux config file
+PLATFORM = vpp
+
+native_arch = native
+
+# Default for which packages go into read-only image
+# used to have pam
+default_root_packages = bash coreutils sysvinit util-linux mingetty procps
+
+# Linux based platforms (PLATFORM=i686 PLATFORM=ppc etc.)
+i686_arch = i686
+x86_64_arch = x86_64
+ppc_arch = ppc
+

src/Buptvppe/build-root/scripts/checkstyle.sh

+#!/bin/bash
+
+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+VPP_DIR=`dirname $0`/../../
+EXIT_CODE=0
+FIX="0"
+FULL="0"
+CHECKSTYLED_FILES=""
+UNCHECKSTYLED_FILES=""
+
+# If the user provides --fix, then actually fix things
+# Note: this is meant for use outside of the CI Jobs, by users cleaning things up
+
+while true; do
+	case ${1} in
+		--fix)
+			FIX="1"
+			;;
+		--full)
+			FULL="1"
+			;;
+	esac
+	shift || break
+done
+
+if [ "${FULL}" == "1" ]; then
+	FILELIST=$(git ls-tree -r HEAD --name-only)
+else
+	FILELIST=$((git diff HEAD~1.. --name-only; git ls-files -m ) | sort -u)
+fi
+
+# Check to make sure we have indent.  Exit if we don't with an error message, but
+# don't *fail*.
+command -v indent > /dev/null
+if [ $? != 0 ]; then
+    echo "Cound not find required command \"indent\".  Checkstyle aborted"
+    exit ${EXIT_CODE}
+fi
+indent --version
+
+# Check to make sure we have clang-format.  Exit if we don't with an error message, but
+# don't *fail*.
+HAVE_CLANG_FORMAT=0
+command -v clang-format > /dev/null
+if [ $? != 0 ]; then
+    echo "Could not find command \"clang-format\". Checking C++ files will cause abort"
+else
+    clang-format --version
+    x=$(echo "" | clang-format 2>&1)
+    if [[ "$x" == "" ]]; then
+        HAVE_CLANG_FORMAT=1
+    else
+	echo "Output produced while formatting empty file (expected empty string):"
+	echo "$x"
+        echo "Could not find working \"clang-format\". Checking C++ files will cause abort"
+    fi
+fi
+
+cd ${VPP_DIR}
+git status
+for i in ${FILELIST}; do
+    if [ -f ${i} ] && [ ${i} != "build-root/scripts/checkstyle.sh" ] && [ ${i} != "extras/emacs/fix-coding-style.el" ]; then
+        grep -q "fd.io coding-style-patch-verification: ON" ${i}
+        if [ $? == 0 ]; then
+            EXTENSION=`basename ${i} | sed 's/^\w\+.//'`
+            case ${EXTENSION} in
+                hpp|cpp|cc|hh)
+                    CMD="clang-format"
+                    if [ ${HAVE_CLANG_FORMAT} == 0 ]; then
+                            echo "C++ file detected. Abort. (missing clang-format)"
+                            exit ${EXIT_CODE}
+                    fi
+                    ;;
+                *)
+                    CMD="indent"
+                    ;;
+            esac
+            CHECKSTYLED_FILES="${CHECKSTYLED_FILES} ${i}"
+            if [ ${FIX} == 0 ]; then
+                if [ "${CMD}" == "clang-format" ]
+                then
+                    clang-format ${i} > ${i}.out2
+                else
+                    indent ${i} -o ${i}.out1 > /dev/null 2>&1
+                    indent ${i}.out1 -o ${i}.out2 > /dev/null 2>&1
+                fi
+                # Remove trailing whitespace
+                sed -i -e 's/[[:space:]]*$//' ${i}.out2
+                diff -q ${i} ${i}.out2
+            else
+                if [ "${CMD}" == "clang-format" ]; then
+                    clang-format -i ${i} > /dev/null 2>&1
+                else
+                    indent ${i}
+                    indent ${i}
+                fi
+                # Remove trailing whitespace
+                sed -i -e 's/[[:space:]]*$//' ${i}
+            fi
+            if [ $? != 0 ]; then
+                EXIT_CODE=1
+                echo
+                echo "Checkstyle failed for ${i}."
+                if [ "${CMD}" == "clang-format" ]; then
+                    echo "Run clang-format as shown to fix the problem:"
+                    echo "clang-format -i ${VPP_DIR}${i}"
+                else
+                    echo "Run indent (twice!) as shown to fix the problem:"
+                    echo "indent ${VPP_DIR}${i}"
+                    echo "indent ${VPP_DIR}${i}"
+                fi
+            fi
+            if [ -f ${i}.out1 ]; then
+                rm ${i}.out1
+            fi
+            if [ -f ${i}.out2 ]; then
+                rm ${i}.out2
+            fi
+        else
+            UNCHECKSTYLED_FILES="${UNCHECKSTYLED_FILES} ${i}"
+        fi
+    else
+        UNCHECKSTYLED_FILES="${UNCHECKSTYLED_FILES} ${i}"
+    fi
+done
+
+if [ ${EXIT_CODE} == 0 ]; then
+    echo "*******************************************************************"
+    echo "* VPP CHECKSTYLE SUCCESSFULLY COMPLETED"
+    echo "*******************************************************************"
+else
+    echo "*******************************************************************"
+    echo "* VPP CHECKSTYLE FAILED"
+    echo "* CONSULT FAILURE LOG ABOVE"
+    echo "* NOTE: Running 'build-root/scripts/checkstyle.sh --fix' *MAY* fix the issue"
+    echo "*******************************************************************"
+fi
+exit ${EXIT_CODE}

src/Buptvppe/build-root/scripts/fts.py

+../../src/scripts/fts.py
\ No newline at end of file

src/Buptvppe/build-root/scripts/remove-rpath

+../../src/scripts/remove-rpath
\ No newline at end of file

src/Buptvppe/build-root/scripts/set-rpath

+#!/bin/bash
+
+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+if [ -z $1 ]; then
+	echo "Please specify path"
+	exit 1
+fi
+
+which chrpath &> /dev/null
+
+if [ $? -ne 0 ] ; then
+	echo "Please install chrpath tool"
+	exit 1
+fi
+
+cd $1
+
+libs=$(find * -type f -name \*.so\*)
+execs=$(find * -type f -path bin/\* )
+
+echo "Setting RPATH to $2 ..."
+
+for i in $libs $execs; do
+	# in case non-ELF file is found
+	chrpath $i 2> /dev/null > /dev/null
+	if [ $? -eq 0 ] ; then
+		echo $i
+		chrpath -r $2
+	fi
+done
+

src/Buptvppe/build-root/scripts/version

+../../src/scripts/version
\ No newline at end of file

src/Buptvppe/build-root/vagrant

+../extras/vagrant
\ No newline at end of file

src/Buptvppe/build/external/Makefile

+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Scripts require non-POSIX parts of bash
+SHELL := /bin/bash
+
+DL_CACHE_DIR = $(HOME)/Downloads
+MAKE ?= make
+MAKE_ARGS ?= -j
+BUILD_DIR        ?= $(CURDIR)/_build
+INSTALL_DIR      ?= $(CURDIR)/_install
+PKG_VERSION ?= $(shell git describe --abbrev=0 | cut -d- -f1 | cut -dv -f2 | cut -d. -f1,2)
+PKG_SUFFIX ?= $(shell git log --oneline v$(PKG_VERSION)-rc0.. -- . | wc -l)
+JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
+	$(shell grep -c ^processor /proc/cpuinfo), 2)
+
+B := $(BUILD_DIR)
+I := $(INSTALL_DIR)
+
+ifneq ($(shell which cmake3),)
+CMAKE?=cmake3
+else
+CMAKE?=cmake
+endif
+
+include packages.mk
+include packages/nasm.mk
+include packages/ipsec-mb.mk
+include packages/quicly.mk
+include packages/dpdk.mk
+include packages/rdma-core.mk
+
+.PHONY: clean
+clean:
+	@rm -rf $(B) $(I)
+
+.PHONY: install
+install: dpdk-install rdma-core-install quicly-install
+
+.PHONY: config
+config: dpdk-config rdma-core-config
+
+##############################################################################
+# .deb packaging
+##############################################################################
+
+DEB_VER := $(PKG_VERSION)
+DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
+DEV_DEB=vpp-ext-deps_$(DEB_VER)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
+INSTALLED_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-ext-deps 2> /dev/null)
+
+.PHONY: build-deb install-deb check-deb
+
+deb/debian/changelog: Makefile
+	@echo "vpp-ext-deps ($(DEB_VER)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
+	@echo "" >> $@
+	@echo "  * Version $(DEB_VER)" >> $@
+	@echo "" >> $@
+	@echo " -- VPP Dev <vpp-dev@lists.fd.io>  $(shell date -R)" >> $@
+
+$(DEV_DEB): deb/debian/changelog
+	@cd deb && dpkg-buildpackage -b -uc -us
+	git clean -fdx deb
+
+build-deb: $(DEV_DEB)
+
+install-deb:
+ifneq ($(INSTALLED_VER),$(DEB_VER)-$(PKG_SUFFIX))
+	@make $(DEV_DEB)
+	@sudo dpkg -i $(DEV_DEB)
+else
+	@echo "=========================================================="
+	@echo " Up-to-date vpp-ext-deps package already installed"
+	@echo "=========================================================="
+endif
+
+check-deb:
+ifneq ($(INSTALLED_VER),$(DEB_VER)-$(PKG_SUFFIX))
+	@echo "=========================================================="
+	@echo " Out of date vpp-ext-deps package installed."
+	@echo " Installed: $(INSTALLED_VER)"
+	@echo " Needed: $(DEB_VER)-$(PKG_SUFFIX)"
+	@echo ""
+	@echo " Please upgrade by invoking 'make install-ext-deps'"
+	@echo " from the top level directory."
+	@echo "=========================================================="
+endif
+
+##############################################################################
+# .rpm packaging
+##############################################################################
+
+RPM_VER := $(PKG_VERSION)
+RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
+DEV_RPM=vpp-ext-deps-$(RPM_VER)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
+INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-ext-deps 2> /dev/null | grep -v "not inst")
+
+.PHONY: build-rpm install-rpm check-rpm
+
+$(DEV_RPM): Makefile rpm/vpp-ext-deps.spec
+	@rpmbuild -bb \
+	  --define "_topdir $(CURDIR)/rpm" \
+	  --define "_version $(RPM_VER)" \
+	  --define "_release $(PKG_SUFFIX)" \
+	  $(CURDIR)/rpm/vpp-ext-deps.spec
+	mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
+	@git clean -fdx rpm
+
+build-rpm: $(DEV_RPM)
+
+install-rpm:
+ifneq ($(INSTALLED_RPM_VER),$(RPM_VER)-$(PKG_SUFFIX))
+	@$(MAKE) $(DEV_RPM)
+	sudo rpm -e vpp-ext-deps || true
+	sudo rpm -Uih --force $(DEV_RPM)
+else
+	@echo "=========================================================="
+	@echo " Up-to-date vpp-ext-deps package already installed"
+	@echo "=========================================================="
+endif
+
+check-rpm:
+ifneq ($(INSTALLED_RPM_VER),$(RPM_VER)-$(PKG_SUFFIX))
+	@echo "=========================================================="
+	@echo " Out of date vpp-ext-deps package installed."
+	@echo " Installed: $(INSTALLED_RPM_VER)"
+	@echo " Needed: $(RPM_VER)-$(PKG_SUFFIX)"
+	@echo ""
+	@echo " Please upgrade by invoking 'make install-ext-deps'"
+	@echo " from the top level directory."
+	@echo "=========================================================="
+endif
+
+##############################################################################
+# ebuild support
+##############################################################################
+
+.PHONY: ebuild-build ebuild-install
+
+ebuild-build:
+ifeq ($(INSTALLED_VER)$(INSTALLED_RPM_VER),)
+	@echo "=========================================================="
+	@echo "Building vpp-ext-deps from source. Consider installing"
+	@echo "development package by invoking 'make install-ext-deps'"
+	@echo "from the top level directory"
+	@echo "=========================================================="
+	make config
+else
+ifneq ($(INSTALLED_VER),)
+	make check-deb
+endif
+ifneq ($(INSTALLED_RPM_VER),)
+	make check-rpm
+endif
+endif
+
+ebuild-install:
+ifeq ($(INSTALLED_VER)$(INSTALLED_RPM_VER),)
+	make install
+endif

src/Buptvppe/build/external/deb/debian/compat

+9

src/Buptvppe/build/external/deb/debian/control

+Source: vpp-ext-deps
+Section: net
+Priority: extra
+Maintainer: vpp-dev@lists.fd.io
+Build-Depends: debhelper (>= 9), dkms
+Standards-Version: 3.9.4
+
+Package: vpp-ext-deps
+Architecture: any
+Depends: ${shlibs:Depends}
+Description: VPP developer package containing dependencies
+Replaces: vpp-dpdk-dev
+Conflicts: vpp-dpdk-dev

src/Buptvppe/build/external/deb/debian/dkms/Makefile

+obj-m:=igb_uio.o
+
+CONFIG_MODULE_SIG=n
+
+EXTRA_CFLAGS += -Winline -I$(PWD)
+
+default:
+	    $(MAKE) -C /lib/modules/$(shell uname -r)/build M=$(shell pwd) modules
+clean:
+	    $(MAKE) -C /lib/modules/$(shell uname -r)/build M=$(shell pwd) clean

src/Buptvppe/build/external/deb/debian/rules

+#!/usr/bin/make -f
+DH_VERBOSE = 1
+DEB_BUILD_OPTIONS = noddebs
+PKG=vpp-ext-deps
+
+VERSION = $(shell dpkg-parsechangelog | sed -nr '/^Version:/s/Version: //p')
+BASE_VER = $(word 1, $(subst -, ,$(VERSION)))
+
+export BUILD_DIR=$(CURDIR)/_build
+export INSTALL_DIR=$(CURDIR)/debian/tmp/opt/vpp/external/$(shell uname -m)/
+
+MAKE_ARGS=-C ..
+
+include /usr/share/dpkg/default.mk
+
+%:
+	dh $@
+
+override_dh_clean:
+	make $(MAKE_ARGS) clean
+
+override_dh_auto_configure:
+
+override_dh_install:
+	make $(MAKE_ARGS) install
+	dh_install -p$(PKG) --autodest /opt
+

src/Buptvppe/build/external/packages.mk

+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+define h1
+	@echo "--- $(1)"
+endef
+
+define package
+$1_tarball_strip_dirs ?= 0
+$1_src_dir ?= $(B)/src-$1
+$1_patch_dir ?= $(CURDIR)/patches/$1_$($1_version)
+$1_build_dir ?= $(B)/build-$1
+$1_install_dir ?= $(I)
+$1_config_log ?= $(B)/$1.config.log
+$1_build_log ?= $(B)/$1.build.log
+$1_install_log ?= $(B)/$1.install.log
+
+##############################################################################
+# Download
+##############################################################################
+downloads/$($1_tarball):
+	mkdir -p downloads
+	@if [ -e $(DL_CACHE_DIR)/$($1_tarball) ] ; \
+		then cp $(DL_CACHE_DIR)/$($1_tarball) $$@ ; \
+	else \
+		echo "Downloading $($1_url)" ; \
+		curl -o $$@ -LO $($1_url) ; \
+	fi
+	@rm -f $(B)/.$1.download.ok
+
+$(B)/.$1.download.ok: downloads/$($1_tarball)
+	@mkdir -p $(B)
+	$$(call h1,"validating $1 $($1_version) checksum")
+	@SUM=$$(shell openssl md5 $$< | cut -f 2 -d " " -) ; \
+	([ "$$$${SUM}" = "$($1_tarball_md5sum)" ] || \
+	( echo "==========================================================" && \
+	  echo "Bad Checksum!" && \
+	  echo "Expected:   $($1_tarball_md5sum)" && \
+	  echo "Calculated: $$$${SUM}" && \
+	  echo "Please remove $$< and retry" && \
+	  echo "==========================================================" && \
+	  false ))
+	@touch $$@
+
+.PHONY: $1-download
+$1-download: $(B)/.$1.download.ok
+
+##############################################################################
+# Extract
+##############################################################################
+$(B)/.$1.extract.ok: $(B)/.$1.download.ok
+	$$(call h1,"extracting $1 $($1_version)")
+	@mkdir -p $$($1_src_dir)
+	@tar \
+	  --directory $$($1_src_dir) \
+	  --extract \
+	  --strip-components=$$($1_tarball_strip_dirs) \
+	  --file downloads/$($1_tarball)
+	@touch $$@
+
+.PHONY: $1-extract
+$1-extract: $(B)/.$1.extract.ok
+
+##############################################################################
+# Patch
+##############################################################################
+$(B)/.$1.patch.ok: $(B)/.$1.extract.ok
+	$$(call h1,"patching $1 $($1_version)")
+ifneq ($$(wildcard $$($1_patch_dir)/*.patch),)
+	@for f in $$($1_patch_dir)/*.patch ; do \
+		echo "Applying patch: $$$$(basename $$$$f)" ; \
+		patch -p1 -d $$($1_src_dir) < $$$$f ; \
+	done
+endif
+	@touch $$@
+
+.PHONY: $1-patch
+$1-patch: $(B)/.$1.patch.ok
+
+##############################################################################
+# Config
+##############################################################################
+
+ifeq ($$(call $1_config_cmds),)
+define $1_config_cmds
+	@cd $$($1_build_dir) && \
+	  CFLAGS="$$($1_cflags)" \
+	  $$($1_src_dir)/configure \
+	    --prefix=$$($1_install_dir) \
+	    $$($1_configure_args) > $$($1_config_log)
+endef
+endif
+
+$(B)/.$1.config.ok: $(B)/.$1.patch.ok $(addsuffix -install,$($1_depends))
+	$$(call h1,"configuring $1 $($1_version) - log: $$($1_config_log)")
+	@mkdir -p $$($1_build_dir)
+	$$(call $1_config_cmds)
+	@touch $$@
+
+.PHONY: $1-config
+$1-config: $(B)/.$1.config.ok
+
+##############################################################################
+# Build
+##############################################################################
+
+ifeq ($$(call $1_build_cmds),)
+define $1_build_cmds
+	@$(MAKE) $(MAKE_ARGS) -C $$($1_build_dir) > $$($1_build_log)
+endef
+endif
+
+$(B)/.$1.build.ok: $(B)/.$1.config.ok
+	$$(call h1,"building $1 $($1_version) - log: $$($1_build_log)")
+	$$(call $1_build_cmds)
+	@touch $$@
+
+.PHONY: $1-build
+$1-build: $(B)/.$1.build.ok
+
+##############################################################################
+# Install
+##############################################################################
+
+ifeq ($$(call $1_install_cmds),)
+define $1_install_cmds
+	@$(MAKE) $(MAKE_ARGS) -C $$($1_build_dir) install > $$($1_install_log)
+endef
+endif
+
+$(B)/.$1.install.ok: $(B)/.$1.build.ok
+	$$(call h1,"installing $1 $($1_version) - log: $$($1_install_log)")
+	$$(call $1_install_cmds)
+	@touch $$@
+
+.PHONY: $1-install
+$1-install: $(B)/.$1.install.ok
+
+ALL_TARGETS += $1-install
+endef

src/Buptvppe/build/external/packages/ipsec-mb.mk

+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ipsec-mb_version             := 0.53
+ipsec-mb_tarball             := v$(ipsec-mb_version).tar.gz
+ipsec-mb_tarball_md5sum_0.49 := 3a2bee86f25f6c8ed720da5b4b8d4297
+ipsec-mb_tarball_md5sum_0.52 := 11ecfa6db4dc0c4ca6e5c616c141ac46
+ipsec-mb_tarball_md5sum_0.53 := e9b3507590efd1c23321518612b644cd
+ipsec-mb_tarball_md5sum      := $(ipsec-mb_tarball_md5sum_$(ipsec-mb_version))
+ipsec-mb_tarball_strip_dirs  := 1
+ipsec-mb_depends             := nasm
+ipsec-mb_url                 := http://github.com/01org/intel-ipsec-mb/archive/$(ipsec-mb_tarball)
+
+define  ipsec-mb_config_cmds
+	@true
+endef
+
+define  ipsec-mb_build_cmds
+	@make -C $(ipsec-mb_src_dir) -j \
+	  SHARED=n \
+	  PREFIX=$(ipsec-mb_install_dir) \
+	  NASM=$(ipsec-mb_install_dir)/bin/nasm \
+	  EXTRA_CFLAGS="-g -msse4.2" > $(ipsec-mb_build_log)
+endef
+
+define  ipsec-mb_install_cmds
+	@mkdir -p $(ipsec-mb_install_dir)/include
+	@mkdir -p $(ipsec-mb_install_dir)/lib
+	@cp $(ipsec-mb_src_dir)/intel-ipsec-mb.h $(ipsec-mb_install_dir)/include
+	@cp $(ipsec-mb_src_dir)/libIPSec_MB.a $(ipsec-mb_install_dir)/lib
+endef
+
+$(eval $(call package,ipsec-mb))
+
+

src/Buptvppe/build/external/packages/nasm.mk

+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+nasm_version            := 2.14.02
+nasm_tarball            := nasm-$(nasm_version).tar.xz
+nasm_tarball_md5sum     := 6390bd67b07ff1df9fe628b6929c0353
+nasm_tarball_strip_dirs := 1
+nasm_url                := https://ftp.osuosl.org/pub/blfs/conglomeration/nasm/$(nasm_tarball)
+nasm_cflags             := -Wno-implicit-fallthrough -std=c11
+
+$(eval $(call package,nasm))

src/Buptvppe/build/external/packages/quicly.mk

+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+quicly_version := 0.1.0-vpp
+quicly_tarball := quicly_$(quicly_version).tar.gz
+quicly_tarball_md5sum := 223f62c4dda7cbb1d907956cafcfd3f0
+quicly_tarball_strip_dirs := 1
+quicly_url := https://github.com/vpp-quic/quicly/releases/download/v$(quicly_version)/quicly_$(quicly_version).tar.gz
+
+picotls_build_dir := $(B)/build-picotls
+
+define  quicly_build_cmds
+	@cd $(quicly_build_dir) && \
+		$(CMAKE) -DWITH_DTRACE=OFF -DCMAKE_INSTALL_PREFIX:PATH=$(quicly_install_dir) \
+		$(quicly_src_dir) > $(quicly_build_log)
+	@$(MAKE) $(MAKE_ARGS) -C $(quicly_build_dir) > $(quicly_build_log)
+
+	@mkdir -p $(picotls_build_dir)
+	@cd $(picotls_build_dir) && \
+		$(CMAKE) -DWITH_DTRACE=OFF -DCMAKE_INSTALL_PREFIX:PATH=$(quicly_install_dir) \
+		$(quicly_src_dir)/deps/picotls > $(quicly_build_log)
+endef
+
+define  quicly_config_cmds
+	@true
+endef
+
+define  quicly_install_cmds
+	@$(MAKE) $(MAKE_ARGS) -C $(quicly_build_dir) install > $(quicly_install_log)
+	@$(MAKE) $(MAKE_ARGS) -C $(picotls_build_dir) install > $(quicly_install_log)
+endef
+
+
+$(eval $(call package,quicly))

src/Buptvppe/build/external/patches/README

+
+Changes needed to DPDK are stored here as git patch files. Maintaining these
+files using “git format-patch” and “git am” will make it simpler to manage
+these changes. Patches made to DPDK should only be temporary until they are
+accepted upstream and made available in the next DPDK release.
+
+The following is the method used to generate these patches:
+
+1. Git clone the package to a new directory:
+ # git clone http://dpdk.org/git/dpdk dpdk
+
+2. Create a branch based on the release you wish to patch.
+Note, “git tag” will show you all the release tags. The following example is
+for release tag “v2.2.0” and will create a branch named “two_dot_two”.
+ # cd <root dir>
+ # git checkout -b two_dot_two v2.2.0
+
+3. Apply all the existing patches to this new branch.
+ # git am </path/to/existing/patches/*>
+
+4. Make your changes and commit your change to your repository.
+ # <edit files>
+ # git commit -s
+
+5. Create the patch files with format-patch. This creates all the patch files
+for your branch (two_dot_two), with your latest commits as the last ones.
+ # git format-patch master..two_dot_two
+
+6. Copy, add and commit the new patches into the patches directory.
+

src/Buptvppe/compile.sh

+#!/bin/bash
+
+make rebuild;

src/Buptvppe/config.yaml

+vpp:
+  ueip: 192.169.0.0
+  len: 24
+  inter: enp5s0
+  nat: 192.168.2.115