enb.band7.tm1.rrh.usrpb210.conf

Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";

eNBs =
(
 {
    ////////// Identification parameters:
    eNB_ID    =  0xe00;

    cell_type =  "CELL_MACRO_ENB";

    eNB_name  =  "eNB_Eurecom_LTEBox";

    // Tracking area code, 0x0000 and 0xfffe are reserved values
    tracking_area_code  =  "1";

    mobile_country_code =  "208";

    mobile_network_code =  "92";

       ////////// Physical parameters:

    component_carriers = (
      {
      frame_type					      = "FDD";
      tdd_config 					      = 3;
      tdd_config_s            			      = 0;
      prefix_type             			      = "NORMAL";
      eutra_band              			      = 7;
      downlink_frequency      			      = 2680000000L;
      uplink_frequency_offset 			      = -120000000;
      Nid_cell					      = 0;
      N_RB_DL                 			      = 25;
      Nid_cell_mbsfn          			      = 0;
      nb_antennas_tx          			      = 1;
      nb_antennas_rx          			      = 1;
      tx_gain                                            = 90;
      rx_gain                                            = 120;
      prach_root              			      = 0;
      prach_config_index      			      = 0;
      prach_high_speed        			      = "DISABLE";
      prach_zero_correlation  			      = 1;
      prach_freq_offset       			      = 2;
      pucch_delta_shift       			      = 1;
      pucch_nRB_CQI           			      = 1;
      pucch_nCS_AN            			      = 0;
      pucch_n1_AN             			      = 32;
      pdsch_referenceSignalPower 			      = -29;
      pdsch_p_b                  			      = 0;
      pusch_n_SB                 			      = 1;
      pusch_enable64QAM          			      = "DISABLE";
      pusch_hoppingMode                                  = "interSubFrame";
      pusch_hoppingOffset                                = 0;
      pusch_groupHoppingEnabled  			      = "ENABLE";
      pusch_groupAssignment      			      = 0;
      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
      pusch_nDMRS1                                       = 1;
      phich_duration                                     = "NORMAL";
      phich_resource                                     = "ONESIXTH";
      srs_enable                                         = "DISABLE";
      /*  srs_BandwidthConfig                                =;
      srs_SubframeConfig                                 =;
      srs_ackNackST                                      =;
      srs_MaxUpPts                                       =;*/

      pusch_p0_Nominal                                   = -90;
      pusch_alpha                                        = "AL1";
      pucch_p0_Nominal                                   = -96;
      msg3_delta_Preamble                                = 6;
      pucch_deltaF_Format1                               = "deltaF2";
      pucch_deltaF_Format1b                              = "deltaF3";
      pucch_deltaF_Format2                               = "deltaF0";
      pucch_deltaF_Format2a                              = "deltaF0";
      pucch_deltaF_Format2b		    	      = "deltaF0";

      rach_numberOfRA_Preambles                          = 64;
      rach_preamblesGroupAConfig                         = "DISABLE";
      /*
      rach_sizeOfRA_PreamblesGroupA                      = ;
      rach_messageSizeGroupA                             = ;
      rach_messagePowerOffsetGroupB                      = ;
      */
      rach_powerRampingStep                              = 4;
      rach_preambleInitialReceivedTargetPower            = -108;
      rach_preambleTransMax                              = 10;
      rach_raResponseWindowSize                          = 10;
      rach_macContentionResolutionTimer                  = 48;
      rach_maxHARQ_Msg3Tx                                = 4;

      pcch_default_PagingCycle                           = 128;
      pcch_nB                                            = "oneT";
      bcch_modificationPeriodCoeff			      = 2;
      ue_TimersAndConstants_t300			      = 1000;
      ue_TimersAndConstants_t301			      = 1000;
      ue_TimersAndConstants_t310			      = 1000;
      ue_TimersAndConstants_t311			      = 10000;
      ue_TimersAndConstants_n310			      = 20;
      ue_TimersAndConstants_n311			      = 1;

      }
    );


    srb1_parameters :
    {
        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
        timer_poll_retransmit    = 80;

        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
        timer_reordering         = 35;

        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
        timer_status_prohibit    = 0;

        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
        poll_pdu                 =  4;

        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
        poll_byte                =  99999;

        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
        max_retx_threshold       =  4;
    }

    # ------- SCTP definitions
    SCTP :
    {
        # Number of streams to use in input/output
        SCTP_INSTREAMS  = 2;
        SCTP_OUTSTREAMS = 2;
    };


    ////////// MME parameters:
    mme_ip_address      = ( { ipv4       = "192.168.12.170";
                              ipv6       = "192:168:30::17";
                              active     = "yes";
                              preference = "ipv4";
                            }
                          );

rrh_gw_config = (
 {			  
    local_if_name = "eth0";			  
    #remote_addr = "169.254.8.28";					  
    #remote_addr = "127.0.0.1";						  
    #remote_addr = "74:d4:35:cc:88:45";	 
    #local_addr = "169.254.7.91";
    #local_addr = "127.0.0.1";
    #local_addr = "d4:be:d9:22:0a:ac";
    local_address = "192.168.12.242" ;
    remote_address = "192.168.12.31" ;
    local_port = 50000;		       
    remote_port = 50001; 
    active = "no"; 
    preference = "udp";	                
                             
}
);  

    NETWORK_INTERFACES :
    {
        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.242/24";

        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.242/24";
        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
    };

    log_config :
    {
      global_log_level                      ="info";
      global_log_verbosity                  ="medium";
      hw_log_level                          ="info";
      hw_log_verbosity                      ="medium";
      phy_log_level                         ="info";
      phy_log_verbosity                     ="medium";
      mac_log_level                         ="info";
      mac_log_verbosity                     ="high";
      rlc_log_level                         ="info";
      rlc_log_verbosity                     ="medium";
      pdcp_log_level                        ="info";
      pdcp_log_verbosity                    ="medium";
      rrc_log_level                         ="info";
      rrc_log_verbosity                     ="medium";
   };
  }
);