* EPC config file for sequence

* EPC condif file for centos on ubuntu
* minor adjustments for logs 


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5417 818b1a75-f10b-46b9-bf7c-635c3b92a50f

openair1/SCHED/phy_procedures_lte_eNb.c

@@ -1425,7 +1425,7 @@ void phy_procedures_eNB_TX(unsigned char next_slot,PHY_VARS_eNB *phy_vars_eNB,ui
       DCI_pdu->nCCE = get_nCCE(num_pdcch_symbols,
 			       &phy_vars_eNB->lte_frame_parms,
 			       get_mi(&phy_vars_eNB->lte_frame_parms,next_slot>>1));
-      LOG_D(PHY,"num_pdcch_symbols %d, nCCE %d\n",num_pdcch_symbols,DCI_pdu->nCCE);
+      LOG_T(PHY,"num_pdcch_symbols %d, nCCE %d\n",num_pdcch_symbols,DCI_pdu->nCCE);
       
 #if defined(SMBV) && !defined(EXMIMO)
       // Sets up PDCCH and DCI table
@@ -1468,7 +1468,7 @@ void phy_procedures_eNB_TX(unsigned char next_slot,PHY_VARS_eNB *phy_vars_eNB,ui
 	    LOG_E(PHY,"[eNB %d] Frame %d subframe %d : No available CCE resources for common DCI (SI)!!!\n",phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1);
 	  } 
 	  else {
-	    LOG_D(PHY,"[eNB %d] Frame %d subframe %d : CCE resource for common DCI (SI)  => %d/%d\n",phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1,
+	    LOG_T(PHY,"[eNB %d] Frame %d subframe %d : CCE resource for common DCI (SI)  => %d/%d\n",phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1,
 		  phy_vars_eNB->dlsch_eNB_SI->nCCE[next_slot>>1],DCI_pdu->nCCE);
 
 #if defined(SMBV) && !defined(EXMIMO)
@@ -1653,7 +1653,7 @@ void phy_procedures_eNB_TX(unsigned char next_slot,PHY_VARS_eNB *phy_vars_eNB,ui
 		  phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1,DCI_pdu->nCCE,DCI_pdu->dci_alloc[i].rnti);
 	  }
 	  else {
-	    LOG_D(PHY,"[eNB %d] Frame %d subframe %d : CCE resources for UE spec DCI (PUSCH %x) => %d/%d\n",
+	    LOG_T(PHY,"[eNB %d] Frame %d subframe %d : CCE resources for UE spec DCI (PUSCH %x) => %d/%d\n",
 		  phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1,DCI_pdu->dci_alloc[i].rnti,
 		  DCI_pdu->dci_alloc[i].nCCE,DCI_pdu->nCCE);
 

openair2/LAYER2/MAC/eNB_scheduler.c

@@ -2714,7 +2714,7 @@ uint32_t allocate_prbs_sub(int nb_rb, uint8_t *rballoc) {
   uint32_t rballoc_dci=0;
   //uint8_t number_of_subbands=13;
 
-  LOG_D(MAC,"*****Check1RBALLOC****: %d%d%d%d (nb_rb %d,N_RBGS %d)\n",
+  LOG_T(MAC,"*****Check1RBALLOC****: %d%d%d%d (nb_rb %d,N_RBGS %d)\n",
       rballoc[3],rballoc[2],rballoc[1],rballoc[0],nb_rb,mac_xface->lte_frame_parms->N_RBGS);
   while((nb_rb >0) && (check < mac_xface->lte_frame_parms->N_RBGS)){
       //printf("rballoc[%d] %d\n",check,rballoc[check]);
@@ -2745,7 +2745,7 @@ uint32_t allocate_prbs_sub(int nb_rb, uint8_t *rballoc) {
       //    check1 = check1+2;
   }
   // rballoc_dci = (rballoc_dci)&(0x1fff);
-  LOG_D(MAC,"*********RBALLOC : %x\n",rballoc_dci);
+  LOG_T(MAC,"*********RBALLOC : %x\n",rballoc_dci);
   // exit(-1);
   return (rballoc_dci);
 }

openair2/LAYER2/MAC/extern.h

-/*________________________MAC/extern.h________________________
-
- Authors : Hicham Anouar, Raymond Knopp
- Company : EURECOM
- Emails  : anouar@eurecom.fr,  knopp@eurecom.fr
-________________________________________________________________*/
-
+/*******************************************************************************
+
+  Eurecom OpenAirInterface
+  Copyright(c) 1999 - 2013 Eurecom
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information
+  Openair Admin: openair_admin@eurecom.fr
+  Openair Tech : openair_tech@eurecom.fr
+  Forums       : http://forums.eurecom.fsr/openairinterface
+  Address      : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
+
+*******************************************************************************/
+/*! \file extern.h
+* \brief mac externs
+* \author Raymond Knopp, Navid Nikaein
+* \date 2012
+* \version 1.0
+* \email navid.nikaein@eurecom.fr
+* @ingroup _mac
+
+*/
 
 #ifndef __MAC_EXTERN_H__
 #define __MAC_EXTERN_H__

openair2/LAYER2/MAC/main.c

@@ -183,7 +183,7 @@ int mac_top_init(int eMBMS_active, uint8_t cba_group_active, uint8_t HO_active){
 #endif
 #endif
 
-  init_transport_channels(2);
+  //init_transport_channels(2);
 
   // Set up DCIs for TDD 5MHz Config 1..6
 

openair2/LAYER2/MAC/pre_processor.c

@@ -752,15 +752,15 @@ void dlsch_scheduler_pre_processor (module_id_t        Mod_id,
 
   for(UE_id=0;UE_id<granted_UEs;UE_id++){
       //PHY_vars_eNB_g[Mod_id]->mu_mimo_mode[UE_id].dl_pow_off = dl_pow_off[UE_id];
-      LOG_D(PHY,"******************Scheduling Information for UE%d ************************\n",UE_id);
-      LOG_D(PHY,"dl power offset UE%d = %d \n",UE_id,dl_pow_off[UE_id]);
-      LOG_D(PHY,"***********RB Alloc for every subband for UE%d ***********\n",UE_id);
+      LOG_D(MAC,"******************Scheduling Information for UE%d ************************\n",UE_id);
+      LOG_D(MAC,"dl power offset UE%d = %d \n",UE_id,dl_pow_off[UE_id]);
+      LOG_D(MAC,"***********RB Alloc for every subband for UE%d ***********\n",UE_id);
       for(j=0;j<N_RBGS;j++){
           //PHY_vars_eNB_g[Mod_id]->mu_mimo_mode[UE_id].rballoc_sub[i] = rballoc_sub_UE[UE_id][i];
-          LOG_D(PHY,"RB Alloc for UE%d and Subband%d = %d\n",UE_id,j,rballoc_sub_UE[UE_id][j]);
+          LOG_D(MAC,"RB Alloc for UE%d and Subband%d = %d\n",UE_id,j,rballoc_sub_UE[UE_id][j]);
       }
       //PHY_vars_eNB_g[Mod_id]->mu_mimo_mode[UE_id].pre_nb_available_rbs = pre_nb_available_rbs[UE_id];
-      LOG_D(PHY,"Total RBs allocated for UE%d = %d\n",UE_id,pre_nb_available_rbs[UE_id]);
+      LOG_D(MAC,"Total RBs allocated for UE%d = %d\n",UE_id,pre_nb_available_rbs[UE_id]);
   }
 }
 

openair2/LAYER2/RLC/rlc_mac.c

@@ -425,7 +425,7 @@ mac_rlc_status_resp_t mac_rlc_status_ind(
     } else {
         rlc_mode = RLC_MODE_NONE;
         //LOG_W(RLC , "[%s] RLC not configured rb id %u lcid %u module %u!\n", __FUNCTION__, rb_id, channel_idP, ue_module_idP);
-	LOG_D(RLC , "[%s] RLC not configured rb id %u lcid %u module %u!\n", __FUNCTION__, rb_id, channel_idP, ue_module_idP);
+	//LOG_D(RLC , "[%s] RLC not configured rb id %u lcid %u module %u!\n", __FUNCTION__, rb_id, channel_idP, ue_module_idP);
     }
 
     switch (rlc_mode) {

openair2/RRC/LITE/L2_interface.c

@@ -58,7 +58,7 @@ extern UE_MAC_INST *UE_mac_inst;
 #endif
 
 //#define RRC_DATA_REQ_DEBUG
-#define DEBUG_RRC
+//#define DEBUG_RRC
 
 mui_t mui=0;
 

targets/PROJECTS/CENTOS-LTE-EPC-INTEGRATION/CONF/enb.centos.memphis.conf

+Active_eNBs = ( "eNB_Eurecom_LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+    
+    cell_type =  "CELL_MACRO_ENB";
+    
+    eNB_name  =  "eNB_Eurecom_LTEBox";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  "15";
+    
+    mobile_country_code =  "208";
+    
+    mobile_network_code =  "92";
+    
+    ////////// Channel parameters:
+    // Default Paging DRX of the eNB as defined in TS 36.304
+    default_paging_drx  =  "PAGING_DRX_256";
+    
+    ////////// Physical parameters:
+    frame_type              = "FDD";	
+    prefix_type             = "NORMAL";
+    eutra_band              = 7;
+    downlink_frequency      = 2680000000L;
+    uplink_frequency_offset = -120000000;
+    
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.14.11";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.14.10/24";
+
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.14.10/24";
+    };
+
+  }
+);

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.sequans.sud.conf

 //Active_eNBs = ( "eNB_Eurecom_0", "eNB_Eurecom_1", "eNB_Eurecom_2", "eNB_Eurecom_3");
 Active_eNBs = ( "eNB_Eurecom_0");
+Asn1_verbosity = "none";
 
 eNBs =
 (
@@ -28,18 +29,24 @@ eNBs =
     eutra_band              = 4;
     downlink_frequency      = 2120000000;
     uplink_frequency_offset = -400000000;
-    
+
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.31";
-                              ipv6       = "2192:168:30::17";
+
+    mme_ip_address      = ( { ipv4       = "192.168.13.11";
+                              ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
-                            },
-                            { ipv4       = "192.168.12.86";
-                              ipv6       = "2192:168:30::18";
-                              active     = "no";
-                              preference = "ipv4";
                             }
                           );
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.13.10/24";
+
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.13.10/24";
+    };
+
   }
 );