complete programming of Msg2/Msg4 procedures for eMTC. Addition of skeleton...

complete programming of Msg2/Msg4 procedures for eMTC. Addition of skeleton for PUCCH UCI (NFAPI) in L1. Some cleanup of eNB_scheduler.c

cmake_targets/CMakeLists.txt

@@ -1566,7 +1566,7 @@ ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/bypass_session_layer.c
-${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/emu_transport.c
+#${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/emu_transport.c
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/pgm_link.c
 )
 

openair1/PHY/LTE_TRANSPORT/defs.h

@@ -493,6 +493,73 @@ typedef struct {
   int32_t delta_TF;
 } LTE_UL_eNB_HARQ_t;
 
+
+typedef enum {
+  pucch_format1=0,
+  pucch_format1a,
+  pucch_format1b,
+  pucch_format2,
+  pucch_format2a,
+  pucch_format2b,
+  pucch_format3    // PUCCH format3
+} PUCCH_FMT_t;
+
+typedef enum {
+  SR,
+  HARQ,
+  CQI,
+  HARQ_SR,
+  HARQ_CQI,
+  SR_CQI,
+  HARQ_SR_CQI  
+} UCI_type_t;
+
+#ifdef Rel14
+typedef enum {
+  NOCE,
+  CEMODEA,
+  CEMODEB
+} UE_type_t;
+#endif
+
+typedef struct {
+  uint8_t     active;
+  /// Absolute frame for this UCI
+  uint16_t    frame;
+  /// Absolute subframe for this UCI
+  uint8_t     subframe;
+  /// corresponding UE RNTI
+  uint16_t    rnti;
+  /// Type (SR,HARQ,CQI,HARQ_SR,HARQ_CQI,SR_CQI,HARQ_SR_CQI)
+  UCI_type_t  type;
+  /// PUCCH format to use
+  PUCCH_FMT_t pucch_fmt;
+  /// antenna indicator
+  uint8_t     num_pucch_resources;
+  /// two antenna n1_pucch
+  uint16_t    n_pucch_1[2];
+  /// two antenna n2_pucch
+  uint16_t    n_pucch_2[2];
+#ifdef Rel14
+  /// non BL/CE, CEmodeA, CEmodeB
+  UE_type_t ue_type;
+  /// Indicates the symbols that are left empty due to eMTC retuning.
+  uint8_t empty_symbols;
+  /// number of repetitions for BL/CE
+  uint16_t total_repetitions;
+  /// The size of the DL CQI/PMI in bits.
+  uint16_t dl_cqi_pmi_size2;
+  /// The starting PRB for the PUCCH
+  uint8_t starting_prb;
+  /// The number of PRB in PUCCH
+  uint8_t n_PRB;
+  /// Selected CDM option
+  uint8_t cdm_Index;
+  // Indicates if the resource blocks allocated for this grant overlap with the SRS configuration.
+  uint8_t Nsrs;
+#endif
+} LTE_eNB_UCI_t;
+
 typedef struct {
   /// HARQ process mask, indicates which processes are currently active
   uint16_t harq_mask;
@@ -764,15 +831,6 @@ typedef enum {
   rx_SIC_dual_stream
 } RX_type_t;
 
-typedef enum {
-  pucch_format1=0,
-  pucch_format1a,
-  pucch_format1b,
-  pucch_format2,
-  pucch_format2a,
-  pucch_format2b,
-  pucch_format3    // PUCCH format3
-} PUCCH_FMT_t;
 
 
 

openair1/PHY/LTE_TRANSPORT/dlsch_coding.c

@@ -120,8 +120,6 @@ LTE_eNB_DLSCH_t *new_eNB_dlsch(unsigned char Kmimo,unsigned char Mdlharq,uint32_
   unsigned char exit_flag = 0,i,j,r,aa,layer;
   int re;
   unsigned char bw_scaling =1;
-  RU_t *ru;
-  int ru_id;
 
   switch (N_RB_DL) {
   case 6:

openair1/PHY/LTE_TRANSPORT/mdci.h

@@ -233,6 +233,8 @@ typedef struct DCI6_1A_20MHz DCI6_1A_20MHz_t;
 
 ///  basic DCI Format Type 6-0B (5 MHz)
 struct DCI6_0B_5MHz {
+  /// padding to fill 32-bit word
+  uint32_t padding:15;
   /// DCI subframe repetition
   uint32_t dci_rep:2;
   /// new data indicator
@@ -240,7 +242,7 @@ struct DCI6_0B_5MHz {
   /// harq id
   uint32_t harq_pid:1;
   /// Repetition number
-  uint32_t rep:2;
+  uint32_t rep:3;
   /// Modulation and Coding Scheme and Redundancy Version
   uint32_t mcs:4;
   /// RB Assignment (ceil(log2(floor(N_RB_UL/6))) + 3 bits)
@@ -250,10 +252,12 @@ struct DCI6_0B_5MHz {
 } __attribute__ ((__packed__));
 
 typedef struct DCI6_0B_5MHz DCI6_0B_5MHz_t; 
-#define sizeof_DCI6_0B_5MHz_t 16
+#define sizeof_DCI6_0B_5MHz_t 17
 
 /// basic DCI Format Type 6-1B (5 MHz)
 struct DCI6_1B_5MHz {
+  /// padding to fill 32-bit word
+  uint32_t padding:15;
   /// DCI subframe repetition number 
   uint32_t dci_rep:2;
   /// HARQ-ACK resource offset
@@ -263,7 +267,7 @@ struct DCI6_1B_5MHz {
   /// HARQ Process
   uint32_t harq_pid:1;
   /// Repetition number
-  uint32_t rep:2;
+  uint32_t rep:3;
   /// Resource block assignment (assignment flag = 0 for 5 MHz, ceil(log2(floor(N_RB_DL/6)))+1)
   uint32_t rballoc:3;
   /// Modulation and Coding Scheme and Redundancy Version
@@ -273,12 +277,12 @@ struct DCI6_1B_5MHz {
 } __attribute__ ((__packed__));
 
 typedef struct DCI6_1B_5MHz DCI6_1B_5MHz_t;
-#define sizeof_DCI6_1B_5MHz_t 16 
+#define sizeof_DCI6_1B_5MHz_t 17 
 
 ///  basic DCI Format Type 6-0B (10 MHz)
 struct DCI6_0B_10MHz {
   /// padding to fill 32-bit word
-  uint32_t padding:15;
+  uint32_t padding:14;
   /// DCI subframe repetition
   uint32_t dci_rep:2;
   /// new data indicator
@@ -286,7 +290,7 @@ struct DCI6_0B_10MHz {
   /// harq id
   uint32_t harq_pid:1;
   /// Repetition number
-  uint32_t rep:2;
+  uint32_t rep:3;
   /// Modulation and Coding Scheme and Redundancy Version
   uint32_t mcs:4;
   /// RB Assignment (ceil(log2(floor(N_RB_UL/6))) + 3 bits)
@@ -296,7 +300,7 @@ struct DCI6_0B_10MHz {
 } __attribute__ ((__packed__));
 
 typedef struct DCI6_0B_10MHz DCI6_0B_10MHz_t; 
-#define sizeof_DCI6_0B_10MHz_t 17
+#define sizeof_DCI6_0B_10MHz_t 18
 
 /// basic DCI Format Type 6-1B (10 MHz)
 struct DCI6_1B_10MHz {

openair1/PHY/LTE_TRANSPORT/proto.h

@@ -2188,5 +2188,7 @@ int8_t find_dlsch(uint16_t rnti, PHY_VARS_eNB *eNB,find_type_t type);
 
 int8_t find_ulsch(uint16_t rnti, PHY_VARS_eNB *eNB,find_type_t type);
 
+int8_t find_uci(uint16_t rnti, int frame, int subframe, PHY_VARS_eNB *eNB,find_type_t type);
+
 /**@}*/
 #endif

openair1/PHY/LTE_TRANSPORT/uci_tools.c

@@ -844,4 +844,21 @@ void print_CQI(void *o,UCI_format_t uci_format,unsigned char eNB_id,int N_RB_DL)
 }
 
 
+int8_t find_uci(uint16_t rnti, int frame, int subframe, PHY_VARS_eNB *eNB,find_type_t type) {
+  uint8_t i;
+  int8_t first_free_index=-1;
+
+  AssertFatal(eNB!=NULL,"eNB is null\n");
+  for (i=0; i<NUMBER_OF_UE_MAX; i++) {
+    if ((eNB->uci_vars[i].active >0) &&
+	(eNB->uci_vars[i].rnti==rnti) &&
+	(eNB->uci_vars[i].frame==frame) &&
+	(eNB->uci_vars[i].subframe==subframe)) return(i); 
+    else if ((eNB->uci_vars[i].active == 0) && (first_free_index==-1)) first_free_index=i;
+  }
+  if (type == SEARCH_EXIST) return(-1);
+  else return(first_free_index);
+}
+
+
 

openair1/PHY/defs.h

@@ -888,15 +888,9 @@ typedef struct PHY_VARS_eNB_s {
   /// Ethernet parameters for fronthaul interface
   eth_params_t         eth_params;
   int                  rx_total_gain_dB;
-  //  void                 (*do_prach)(struct PHY_VARS_eNB_s *eNB,struct RU_t_s *ru,int frame, int subframe);
   int                  (*td)(struct PHY_VARS_eNB_s *eNB,int UE_id,int harq_pid,int llr8_flag);
   int                  (*te)(struct PHY_VARS_eNB_s *,uint8_t *,uint8_t,LTE_eNB_DLSCH_t *,int,uint8_t,time_stats_t *,time_stats_t *,time_stats_t *);
-  //  void                 (*proc_uespec_rx)(struct PHY_VARS_eNB_s *eNB,eNB_rxtx_proc_t *proc,const relaying_type_t r_type);
-  //  void                 (*proc_tx)(struct PHY_VARS_eNB_s *eNB,eNB_rxtx_proc_t *proc,relaying_type_t r_type,PHY_VARS_RN *rn);
-  //  void                 (*tx_fh)(struct PHY_VARS_eNB_s *eNB,eNB_rxtx_proc_t *proc);
-  //  void                 (*rx_fh)(struct PHY_VARS_eNB_s *eNB,int *frame, int *subframe);
   int                  (*start_if)(struct RU_t_s *ru,struct PHY_VARS_eNB_s *eNB);
-  //  void                 (*fh_asynch)(struct PHY_VARS_eNB_s *eNB,int *frame, int *subframe);
   uint8_t              local_flag;
   LTE_DL_FRAME_PARMS   frame_parms;
   PHY_MEASUREMENTS_eNB measurements;
@@ -921,6 +915,7 @@ typedef struct PHY_VARS_eNB_s {
   LTE_eNB_PRACH        prach_vars_br;
 #endif
   LTE_eNB_COMMON       common_vars;
+  LTE_eNB_UCI_t        uci_vars[NUMBER_OF_UE_MAX];
   LTE_eNB_SRS          srs_vars[NUMBER_OF_UE_MAX];
   LTE_eNB_PBCH         pbch;
   LTE_eNB_PUSCH       *pusch_vars[NUMBER_OF_UE_MAX];

openair1/SCHED/phy_procedures_lte_eNb.c

@@ -1065,17 +1065,43 @@ handle_nfapi_dlsch_pdu(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,
 #endif
 }
 
+handle_uci_harq_pdu(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,nfapi_ul_config_request_pdu_t *ul_config_pdu) {
+
+}
+
 handle_nfapi_ul_pdu(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,  
 		    nfapi_ul_config_request_pdu_t *ul_config_pdu) {
 
   nfapi_ul_config_ulsch_pdu_rel8_t *rel8 = &ul_config_pdu->ulsch_pdu.ulsch_pdu_rel8;
   int8_t UE_id;
   // check if we have received a dci for this ue and ulsch descriptor is configured
-  
-  AssertFatal((UE_id = find_ulsch(rel8->rnti,eNB,SEARCH_EXIST))>=0,
-	      "No existing UE ULSCH for rnti %x\n",rel8->rnti);
-  AssertFatal(eNB->ulsch[UE_id]->harq_mask > 0,
-	      "ulsch for UE_id %d is not active\n",UE_id);
+
+  if (ul_config_pdu == NFAPI_UL_CONFIG_ULSCH_PDU_TYPE) {
+    AssertFatal((UE_id = find_ulsch(rel8->rnti,eNB,SEARCH_EXIST))>=0,
+		"No existing UE ULSCH for rnti %x\n",rel8->rnti);
+    AssertFatal(eNB->ulsch[UE_id]->harq_mask > 0,
+		"ulsch for UE_id %d is not active\n",UE_id);
+  }
+  else if (ul_config_pdu == NFAPI_UL_CONFIG_UCI_HARQ_PDU_TYPE) {
+    AssertFatal((UE_id = find_uci(rel8->rnti,proc->frame_tx,proc->subframe_tx,eNB,SEARCH_EXIST))>=0,
+		"No existing UE UCI for rnti %x\n",rel8->rnti);
+    handle_uci_harq_pdu(eNB,proc,ul_config_pdu);
+  }
+  else if (ul_config_pdu == NFAPI_UL_CONFIG_UCI_CQI_PDU_TYPE) {
+
+  }
+  else if (ul_config_pdu == NFAPI_UL_CONFIG_UCI_CQI_HARQ_PDU_TYPE) {
+
+  }
+  else if (ul_config_pdu == NFAPI_UL_CONFIG_UCI_CQI_SR_PDU_TYPE) {
+
+  }
+  else if (ul_config_pdu == NFAPI_UL_CONFIG_UCI_SR_PDU_TYPE) {
+
+  }
+  else if (ul_config_pdu == NFAPI_UL_CONFIG_UCI_SR_HARQ_PDU_TYPE) {
+
+  }
 	      
 }
 
@@ -1227,7 +1253,8 @@ void schedule_response(Sched_Rsp_t *Sched_INFO) {
   for (i=0;i<number_ul_pdu;i++) {
     ul_config_pdu = &UL_req->ul_config_request_body.ul_config_pdu_list[i];
     LOG_D(PHY,"NFAPI: ul_pdu %d : type %d\n",i,ul_config_pdu->pdu_type);
-    AssertFatal(ul_config_pdu->pdu_type == NFAPI_UL_CONFIG_ULSCH_PDU_TYPE,
+    AssertFatal(ul_config_pdu->pdu_type == NFAPI_UL_CONFIG_ULSCH_PDU_TYPE ||
+		ul_config_pdu->pdu_type == NFAPI_UL_CONFIG_UCI_HARQ_PDU_TYPE,
 		"Optional UL_PDU type %d not supported\n",ul_config_pdu->pdu_type);
     handle_nfapi_ul_pdu(eNB,proc,ul_config_pdu);
   }
@@ -1524,6 +1551,8 @@ void process_HARQ_feedback(uint8_t UE_id,
   int subframe = proc->subframe_rx;
   int harq_pid = subframe2harq_pid( fp,frame,subframe);
 
+  nfapi_harq_indication_pdu_t *pdu;
+
   if (fp->frame_type == FDD) { //FDD
     subframe_m4 = (subframe<4) ? subframe+6 : subframe-4;
 
@@ -1546,6 +1575,9 @@ void process_HARQ_feedback(uint8_t UE_id,
       */
     }
 
+    // fill ACK/NAK Indication
+    pdu = &eNB->UL_INFO.harq_ind.harq_pdu_list[eNB->UL_INFO.harq_ind.number_of_harqs];
+    eNB->UL_INFO.harq_ind.number_of_harqs++;    
 
 #if defined(MESSAGE_CHART_GENERATOR_PHY)
     MSC_LOG_RX_MESSAGE(
@@ -1578,6 +1610,7 @@ void process_HARQ_feedback(uint8_t UE_id,
 	?eNB->ulsch[(uint8_t)UE_id]->harq_processes[harq_pid]->o_ACK[0]:eNB->ulsch[(uint8_t)UE_id]->harq_processes[harq_pid]->o_ACK[1];
     }
 
+
     else {  // PUCCH ACK/NAK
       if ((SR_payload == 1)&&(pucch_sel!=2)) {  // decode Table 7.3 if multiplexing and SR=1
         nb_ACK = 0;
@@ -2752,8 +2785,6 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const
                 frame,subframe, i,
                 ulsch_harq->round-1);
 
-	  dump_ulsch(eNB,proc,i);
-	  exit(-1);
 	  
 	  LOG_D(PHY,"[eNB %d][PUSCH %d] frame %d subframe %d RNTI %x RX power (%d,%d) RSSI (%d,%d) N0 (%d,%d) dB ACK (%d,%d), decoding iter %d\n",
 		eNB->Mod_id,harq_pid,
@@ -2768,46 +2799,6 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const
 		ulsch_harq->o_ACK[0],
 		ulsch_harq->o_ACK[1],
 		ret);
-	  /*
-          if (ulsch_harq->round ==
-              fp->maxHARQ_Msg3Tx) {
-            LOG_D(PHY,"[eNB %d][RAPROC] maxHARQ_Msg3Tx reached, abandoning RA procedure for UE %d\n",
-                  eNB->Mod_id, i);
-            eNB->UE_stats[i].mode = PRACH;
-//	    if (eNB->mac_enabled==1) { 
-//	      mac_xface->cancel_ra_proc(eNB->Mod_id,
-//					eNB->CC_id,
-//					frame,
-//					eNB->UE_stats[i].crnti);
-//				       
-//	    }
-
-	    //            mac_phy_remove_ue(eNB->Mod_id,eNB->UE_stats[i].crnti);
-
-            eNB->ulsch[(uint32_t)i]->Msg3_active = 0;
-            //ulsch_harq->phich_active = 0;
-
-          } else {
-            // activate retransmission for Msg3 (signalled to UE PHY by PHICH (not MAC/DCI)
-            eNB->ulsch[(uint32_t)i]->Msg3_active = 1;
-
-            get_Msg3_alloc_ret(fp,
-                               subframe,
-                               frame,
-                               &ulsch_harq->frame,
-                               &ulsch_harq->subframe);
-	    
-            //mac_xface->set_msg3_subframe(eNB->Mod_id, eNB->CC_id, frame, subframe, eNB->ulsch[i]->rnti,
-            //                             eNB->ulsch[i]->Msg3_frame, eNB->ulsch[i]->Msg3_subframe);
-	    
-
-            T(T_ENB_PHY_MSG3_ALLOCATION, T_INT(eNB->Mod_id), T_INT(frame), T_INT(subframe),
-              T_INT(i), T_INT(ulsch->rnti), T_INT(0 
-	      // 0 is for retransmission
-	      ),
-              T_INT(eNB->ulsch[i]->Msg3_frame), T_INT(eNB->ulsch[i]->Msg3_subframe));
-          }
-*/
           LOG_D(PHY,"[eNB] Frame %d, Subframe %d: Msg3 in error, i = %d \n", frame,subframe,i);
         } // This is Msg3 error
 
@@ -2836,34 +2827,17 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const
                   eNB->Mod_id,harq_pid,
                   frame,subframe, i,
                   ulsch->Mlimit);
-
+	    
             ulsch_harq->round=0;
             ulsch_harq->phich_active=0;
             eNB->UE_stats[i].ulsch_errors[harq_pid]++;
             eNB->UE_stats[i].ulsch_consecutive_errors++;
-
-	   /*if (ulsch_harq->nb_rb > 20) {
-		dump_ulsch(eNB,proc,i);
-	 	exit(-1);
-           }*/
-	    // indicate error to MAC
-	    if (eNB->mac_enabled == 1) {
-	      /*
-	      mac_xface->rx_sdu(eNB->Mod_id,
-				eNB->CC_id,
-				frame,subframe,
-				ulsch->rnti,
-				NULL,
-				0,
-				harq_pid,
-				&eNB->ulsch[i]->Msg3_flag);
-	      */
-	    }
-          }
-        }
+	    
+	  }
+	}
       }  // ulsch in error
       else {
-
+	
 
 	fill_crc_indication(eNB,i,frame,subframe,0); // indicate ACK to MAC
 	fill_rx_indication(eNB,i,frame,subframe);    // indicate SDU to MAC
@@ -2920,29 +2894,11 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const
 		  eNB->Mod_id,
 		  frame,harq_pid,i);
 	    if (eNB->mac_enabled) {
-	      /*
-	      mac_xface->rx_sdu(eNB->Mod_id,
-				eNB->CC_id,
-				frame,subframe,
-				eNB->ulsch[i]->rnti,
-				ulsch_harq->b,
-				ulsch_harq->TBS>>3,
-				harq_pid,
-				&ulsch->Msg3_flag);
-	      */
 	      // Fill UL info
 	    }
 	    // one-shot msg3 detection by MAC: empty PDU (e.g. CRNTI)
 	    if (ulsch_harq->Msg3_flag == 0 ) {
 	      eNB->UE_stats[i].mode = PRACH;
-	      /*
-	      mac_xface->cancel_ra_proc(eNB->Mod_id,
-					eNB->CC_id,
-					frame,
-					eNB->UE_stats[i].crnti);
-	      mac_phy_remove_ue(eNB->Mod_id,eNB->UE_stats[i].crnti);
-	      */
-	      
 	      eNB->ulsch[(uint32_t)i]->Msg3_active = 0;
 	    } // Msg3_flag == 0
 	    
@@ -2984,26 +2940,12 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const
                 harq_pid,ulsch_harq->TBS>>3);
 
           for (j=0; j<ulsch_harq->TBS>>3; j++)
-            LOG_T(PHY,"%x.",eNB->ulsch[i]->harq_processesyy[harq_pid]->b[j]);
+            LOG_T(PHY,"%x.",eNB->ulsch[i]->harq_processes[harq_pid]->b[j]);
 
           LOG_T(PHY,"\n");
 #endif
 #endif
 
-	  if (eNB->mac_enabled==1) {
-	    /*
-	    mac_xface->rx_sdu(eNB->Mod_id,
-			      eNB->CC_id,
-			      frame,subframe,
-			      ulsch->rnti,
-			      eNB->ulsch[i]->harq_processes[harq_pid]->b,
-			      eNB->ulsch[i]->harq_processes[harq_pid]->TBS>>3,
-			      harq_pid,
-			      NULL);*/
-
-	    // Fill UL_INFO
-
-	  } // mac_enabled==1
         } // Msg3_flag == 0
 
         

openair2/LAYER2/MAC/defs.h

@@ -827,15 +827,15 @@ typedef struct {
   /// Subframe where Msg2 is to be sent
   uint8_t Msg2_subframe;
   /// Frame where Msg2 is to be sent
-  uint8_t Msg2_frame;
+  frame_t Msg2_frame;
   /// Subframe where Msg3 is to be sent
-  uint8_t Msg3_subframe;
+  sub_frame_t Msg3_subframe;
   /// Frame where Msg3 is to be sent
-  uint8_t Msg3_frame;
+  frame_t Msg3_frame;
   /// Subframe where Msg4 is to be sent
-  uint8_t Msg4_subframe;
+  sub_frame_t Msg4_subframe;
   /// Frame where Msg4 is to be sent
-  uint8_t Msg4_frame;
+  frame_t Msg4_frame;
   /// Flag to indicate the eNB should generate Msg4 upon reception of SDU from RRC.  This is triggered by first ULSCH reception at eNB for new user.
   uint8_t generate_Msg4;
   /// Flag to indicate that eNB is waiting for ACK that UE has received Msg3.
@@ -854,6 +854,10 @@ typedef struct {
   int16_t RRC_timer;
   /// Round of Msg3 HARQ
   uint8_t msg3_round;
+  /// TBS used for Msg4
+  int Msg4_TBsize;
+  /// MCS used for Msg4
+  int Msg4_mcs;
 #ifdef Rel14
   uint8_t rach_resource_type;
   uint8_t msg2_mpdcch_repetition_cnt;

openair2/LAYER2/MAC/eNB_scheduler_bch.c

@@ -143,7 +143,10 @@ schedule_SIB1_BR(
     switch (N_RB_DL) {
     case 6:
     case 15:
+      m=1;
       n_NB=0;
+      N_S_NB=0;
+      Sj=NULL;
       break;
     case 25:
       m=2;
@@ -305,11 +308,8 @@ schedule_SI_BR(
   nfapi_dl_config_request_pdu_t           *dl_config_pdu;
   nfapi_tx_request_pdu_t                  *TX_req;
   nfapi_dl_config_request_body_t          *dl_req;
-  int                                     m,i,N_S_NB;
-  int                                     *Sj;
-  int                                     n_NB = 0;
-  int                                     TBS;
-  int                                     k,rvidx;
+  int                                     i;
+  int                                     rvidx;
 
 
 
@@ -378,7 +378,7 @@ schedule_SI_BR(
 	  if (bcch_sdu_length > 0) {
 	    AssertFatal(bcch_sdu_length <= (si_TBS_r13>>3),
 			"RRC provided bcch with length %d > %d\n",
-			bcch_sdu_length,(si_TBS_r13>>3));
+			bcch_sdu_length,(int)(si_TBS_r13>>3));
 	    LOG_D(MAC,"[eNB %d] Frame %d : BCCH_BR %d->DLSCH CC_id %d, Received %d bytes \n",module_idP,frameP,i,CC_id,bcch_sdu_length);
 	    
 	    // allocate all 6 PRBs in narrowband for SIB1_BR

openair2/LAYER2/MAC/eNB_scheduler_primitives.c

@@ -98,10 +98,10 @@ uint16_t mac_computeRIV(uint16_t N_RB_DL,uint16_t RBstart,uint16_t Lcrbs) {
 }
 
 void get_Msg3alloc(COMMON_channels_t *cc,
-		   unsigned char current_subframe,
-		   unsigned int current_frame,
-		   unsigned int *frame,
-		   unsigned char *subframe)
+		   sub_frame_t current_subframe,
+		   frame_t current_frame,
+		   frame_t *frame,
+		   sub_frame_t *subframe)
 {
 
   // Fill in other TDD Configuration!!!!
@@ -211,10 +211,10 @@ void get_Msg3alloc(COMMON_channels_t *cc,
 
 
 void get_Msg3allocret(COMMON_channels_t *cc,
-		      unsigned char current_subframe,
-		      unsigned int current_frame,
-		      unsigned int *frame,
-		      unsigned char *subframe)
+		      sub_frame_t current_subframe,
+		      frame_t current_frame,
+		      frame_t *frame,
+		      sub_frame_t *subframe)
 {
   if (cc->tdd_Config == NULL) { //FDD
     /* always retransmit in n+8 */
@@ -249,7 +249,7 @@ void get_Msg3allocret(COMMON_channels_t *cc,
   }
 }
 
-uint8_t subframe2harqpid(COMMON_channels_t *cc,uint32_t frame,uint8_t subframe)
+uint8_t subframe2harqpid(COMMON_channels_t *cc,frame_t frame,sub_frame_t subframe)
 {
   uint8_t ret = 255;
 
@@ -317,8 +317,8 @@ uint8_t subframe2harqpid(COMMON_channels_t *cc,uint32_t frame,uint8_t subframe)
 }
 
 uint8_t get_Msg3harqpid(COMMON_channels_t *cc,
-			uint32_t frame,
-			unsigned char current_subframe)
+			frame_t frame,
+			sub_frame_t current_subframe)
 {
 
   uint8_t ul_subframe=0;
@@ -403,7 +403,7 @@ uint8_t get_Msg3harqpid(COMMON_channels_t *cc,
 
 }
 
-int is_UL_sf(COMMON_channels_t *ccP,uint8_t subframeP)
+int is_UL_sf(COMMON_channels_t *ccP,sub_frame_t subframeP)
 {
 
   // if FDD return dummy value

openair2/LAYER2/MAC/eNB_scheduler_ulsch.c

@@ -403,7 +403,7 @@ void rx_sdu(const module_id_t enb_mod_idP,
           RA_template->generate_Msg4 = 1;
           RA_template->wait_ack_Msg4 = 0;
 	  
-	  // Program Msg4 PDCCH+DLSCH/MPDCCH transmission 4 subframes from now
+	  // Program Msg4 PDCCH+DLSCH/MPDCCH transmission 4 subframes from now, // Check if this is ok for BL/CE, or if the rule is different
 	  RA_template->Msg4_frame    = frameP + ((subframeP>5) ? 1 : 0);
 	  RA_template->Msg4_subframe = (subframeP+4)%10;
 	  

openair2/LAYER2/MAC/proto.h

@@ -230,6 +230,17 @@ unsigned short fill_rar(
   const uint8_t input_buffer_length
 );
 
+#ifdef Rel14
+unsigned short fill_rar_br(eNB_MAC_INST *eNB,
+			   int CC_id,
+			   RA_TEMPLATE        *RA_template,      
+			   const frame_t      frameP,
+			   const sub_frame_t  subframeP,
+			   uint8_t*    const  dlsch_buffer,
+			   const uint8_t      ce_level
+			   );
+#endif
+
 /* \brief Function to indicate a failed RA response.  It removes all temporary variables related to the initial connection of a UE
 @param Mod_id Instance ID of eNB
 @param preamble_index index of the received RA request.
@@ -857,19 +868,18 @@ uint16_t getRIV(uint16_t N_RB_DL,uint16_t RBstart,uint16_t Lcrbs);
 
 int get_subbandsize(uint8_t dl_bandwidth);
 
-uint8_t subframe2harqpid(COMMON_channels_t *cc,uint32_t frame,uint8_t subframe);
 
 void get_Msg3allocret(COMMON_channels_t *cc,
-		      unsigned char current_subframe,
-		      unsigned int current_frame,
-		      unsigned int *frame,
-		      unsigned char *subframe);
+		      sub_frame_t current_subframe,
+		      frame_t current_frame,
+		      frame_t *frame,
+		      sub_frame_t *subframe);
 
 void get_Msg3alloc(COMMON_channels_t *cc,
-		   unsigned char current_subframe,
-		   unsigned int current_frame,
-		   unsigned int *frame,
-		   unsigned char *subframe);
+		   sub_frame_t current_subframe,
+		   frame_t current_frame,
+		   frame_t *frame,
+		   sub_frame_t *subframe);
 
 uint16_t mac_computeRIV(uint16_t N_RB_DL,uint16_t RBstart,uint16_t Lcrbs);
 
@@ -880,8 +890,23 @@ int to_rbg(int dl_Bandwidth);
 int to_prb(int dl_Bandwidth);
 
 uint8_t get_Msg3harqpid(COMMON_channels_t *cc,
-			uint32_t frame,
-			unsigned char current_subframe);
+			frame_t frame,
+			sub_frame_t current_subframe);
+int is_UL_sf(COMMON_channels_t *ccP,sub_frame_t subframeP);
+
+uint8_t subframe2harqpid(COMMON_channels_t *cc,frame_t frame,sub_frame_t subframe);
+
+
+
+#ifdef Rel14
+int get_numnarrowbandbits(long dl_Bandwidth);
+
+int mpdcch_sf_condition(eNB_MAC_INST *eNB,int CC_id, frame_t frameP,sub_frame_t subframeP,int rmax,MPDCCH_TYPES_t mpdcch_type);
+
+int get_numnarrowbands(long dl_Bandwidth);
+#endif
+
+
 
 #endif
 /** @}*/

openair2/LAYER2/MAC/rar_tools.c

@@ -132,8 +132,8 @@ unsigned short fill_rar(
 #ifdef Rel14
 //------------------------------------------------------------------------------
 unsigned short fill_rar_br(eNB_MAC_INST *eNB,
-			   const int          CC_id,
-			   const int          ra_idx,
+			   int CC_id,
+			   RA_TEMPLATE        *RA_template,      
 			   const frame_t      frameP,
 			   const sub_frame_t  subframeP,
 			   uint8_t*    const  dlsch_buffer,
@@ -143,44 +143,41 @@ unsigned short fill_rar_br(eNB_MAC_INST *eNB,
 {
 
   RA_HEADER_RAPID *rarh = (RA_HEADER_RAPID *)dlsch_buffer;
-
+  COMMON_channels_t *cc = &eNB->common_channels[CC_id];
   uint8_t *rar = (uint8_t *)(dlsch_buffer+1);
   int i;
   uint8_t nb,rballoc,reps;
   uint8_t mcs,TPC,ULdelay,cqireq;
-  COMMON_channels_t *cc = &eNB->common_channels[CC_id];
   int input_buffer_length;
 
 
-  AssertFatal(CC_id < MAX_NUM_CCs, "CC_id %u < MAX_NUM_CCs %u", CC_id, MAX_NUM_CCs);
-
-  AssertFatal(ra_idx >= 0 && ra_idx < 4, "RA index not in [0..3]\n");
+  AssertFatal(RA_template != NULL, "RA is null \n");
 
   // subheader fixed
   rarh->E                     = 0; // First and last RAR
   rarh->T                     = 1; // 0 for E/T/R/R/BI subheader, 1 for E/T/RAPID subheader
-  rarh->RAPID                 = cc->RA_template[ra_idx].preamble_index; // Respond to Preamble 0 only for the moment
-  cc->RA_template[ra_idx].timing_offset /= 16; //T_A = N_TA/16, where N_TA should be on a 30.72Msps
-  rar[0] = (uint8_t)(cc->RA_template[ra_idx].timing_offset>>(2+4)); // 7 MSBs of timing advance + divide by 4
-  rar[1] = (uint8_t)(cc->RA_template[ra_idx].timing_offset<<(4-2))&0xf0; // 4 LSBs of timing advance + divide by 4
+  rarh->RAPID                 = RA_template->preamble_index; // Respond to Preamble 0 only for the moment
+  RA_template->timing_offset /= 16; //T_A = N_TA/16, where N_TA should be on a 30.72Msps
+  rar[0] = (uint8_t)(RA_template->timing_offset>>(2+4)); // 7 MSBs of timing advance + divide by 4
+  rar[1] = (uint8_t)(RA_template->timing_offset<<(4-2))&0xf0; // 4 LSBs of timing advance + divide by 4
 
   int N_NB_index;
 
   AssertFatal(1==0,"RAR for BL/CE Still to be finished ...\n"); 
 
   // Copy the Msg2 narrowband
-  cc->RA_template[ra_idx].msg34_narrowband = cc->RA_template[ra_idx].msg2_narrowband; 
+  RA_template->msg34_narrowband = RA_template->msg2_narrowband; 
 
   if (ce_level<2) { //CE Level 0,1, CEmodeA
     input_buffer_length =6;
 
     N_NB_index = get_numnarrowbandbits(cc->mib->message.dl_Bandwidth);
 
-    rar[4] = (uint8_t)(cc->RA_template[ra_idx].rnti>>8);
-    rar[5] = (uint8_t)(cc->RA_template[ra_idx].rnti&0xff);
+    rar[4] = (uint8_t)(RA_template->rnti>>8);
+    rar[5] = (uint8_t)(RA_template->rnti&0xff);
     //cc->RA_template[ra_idx].timing_offset = 0;
     nb      = 0;
-    rballoc = mac_computeRIV(6,1+ra_idx,1); // one PRB only for UL Grant in position 1+ra_idx within Narrowband
+    rballoc = mac_computeRIV(6,1+ce_level,1); // one PRB only for UL Grant in position 1+ce_level within Narrowband
     rar[1] |= (rballoc&15)<<(4-N_NB_index); // Hopping = 0 (bit 3), 3 MSBs of rballoc
 
     reps    = 4;
@@ -195,27 +192,26 @@ unsigned short fill_rar_br(eNB_MAC_INST *eNB,
 
     input_buffer_length =5;
 
-    rar[3] = (uint8_t)(cc->RA_template[ra_idx].rnti>>8);
-    rar[4] = (uint8_t)(cc->RA_template[ra_idx].rnti&0xff);
+    rar[3] = (uint8_t)(RA_template->rnti>>8);
+    rar[4] = (uint8_t)(RA_template->rnti&0xff);
   }
-  LOG_D(MAC,"[RAPROC] CC_id %d Frame %d Generating RAR BR (%02x|%02x.%02x.%02x.%02x.%02x.%02x) for ra_idx %d, CRNTI %x,preamble %d/%d,TIMING OFFSET %d\n",
-        CC_id,
+  LOG_D(MAC,"[RAPROC] Frame %d Generating RAR BR (%02x|%02x.%02x.%02x.%02x.%02x.%02x) for ce_level %d, CRNTI %x,preamble %d/%d,TIMING OFFSET %d\n",
         frameP,
         *(uint8_t*)rarh,rar[0],rar[1],rar[2],rar[3],rar[4],rar[5],
-        ra_idx,
-        cc->RA_template[ra_idx].rnti,
-        rarh->RAPID,cc->RA_template[0].preamble_index,
-        cc->RA_template[ra_idx].timing_offset);
+        ce_level,
+        RA_template->rnti,
+        rarh->RAPID,RA_template->preamble_index,
+        RA_template->timing_offset);
 
   if (opt_enabled) {
     trace_pdu(1, dlsch_buffer, input_buffer_length, eNB->Mod_id, 2, 1,
         eNB->frame, eNB->subframe, 0, 0);
-    LOG_D(OPT,"[eNB %d][RAPROC] CC_id %d RAR Frame %d trace pdu for rnti %x and  rapid %d size %d\n",
-          eNB->Mod_id, CC_id, frameP, cc->RA_template[ra_idx].rnti,
+    LOG_D(OPT,"[RAPROC] RAR Frame %d trace pdu for rnti %x and  rapid %d size %d\n",
+          frameP, RA_template->rnti,
           rarh->RAPID, input_buffer_length);
   }
 
-  return(cc->RA_template[ra_idx].rnti);
+  return(RA_template->rnti);
 }
 #endif
 

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.oaisim.conf

 RUs = (
     {		  
-      	local_if_name                    = "enp1s0";			  
-      	remote_address                   = "192.168.117.113";
-    	local_address                    = "192.168.117.205"; 
+      	local_if_name                    = "lo";			  
+      	remote_address                   = "127.0.0.1"
+    	local_address                    = "127.0.0.2"; 
     	local_portc                       = 50000;	     
     	remote_portc                      = 50000;
     	local_portd                       = 50001;