test_case_list.xml

<testCaseList>

<MachineList>mozart hutch starsky stevens amerique calisson nano</MachineList>
 <NFSResultsShare>/mnt/sradio/TEST_RESULTS/</NFSResultsShare>
 <GitOAI5GRepo>https://gitlab.eurecom.fr/oai/openairinterface5g.git</GitOAI5GRepo>
 <GitOpenair-cnRepo>https://gitlab.eurecom.fr/oai/openair-cn.git</GitOpenair-cnRepo>
 <GitOAI5GRepoBranch>develop</GitOAI5GRepoBranch>
 <GitOpenair-cnRepoBranch>develop</GitOpenair-cnRepoBranch>
 <CleanUpOldProgs>oaisim oaisim_nos1 lte-softmodem lte-softmodem-nos1 mme_gw run_epc auth_request run_hss oai_hss mme spgw hss hss_sim configure_cots* wvdial  iperf iperf_script iperf_script_phone ping tshark rrh_gw iperf3 iperf3_script iperf3_script_phone pppd starthss start_ltebox stop_ltebox configure_cots_sony_experia_m4_ue configure_cots_huaweiE398_ue configure_cots_bandrich_ue</CleanUpOldProgs>	
 <CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox>
<ExmimoRfStop>exmimo_pci=`lspci -m | grep Xilinx`; if [ -n "$exmimo_pci" ] ; then $OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; fi; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --reset-ue;  sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg</ExmimoRfStop>
 <Timeout_execution>36000</Timeout_execution>
 <TestCaseExclusionList>010141 0102+ 010304 010305 0104+ 015502 015505 015508 015511 015514 015517 015520 015523 015602 015605 015702 015705 015802 015805 015808 015811 015814 015817 015820 015823 016102 016105 016502 016505 017002 017005 017502 017505 018002 018005 018502 018505 025502 025505 025508 025511 025514 025517 025520 025523</TestCaseExclusionList>
 <nruns_lte-softmodem>3</nruns_lte-softmodem>
 <MachineListGeneric>mozart hutch starsky stevens amerique calisson </MachineListGeneric>
     <testCase id="010101" >
     <class>compilation</class>
     <desc>Build oaisim.Rel8</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--oaisim -r Rel8  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
                       $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>oaisim.Rel8</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010102" >
     <class>compilation</class>
     <desc>Build oaisim.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--oaisim -r Rel10  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
                       $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>oaisim.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010103" >
     <class>compilation</class>
     <desc>Build oaisim_noS1.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--oaisim -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/oai_nw_drv/oai_nw_drv.ko</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>oaisim_noS1.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010110" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.USRP.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w USRP -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_usrpdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.USRP.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010111" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.EXMIMO.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w EXMIMO -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/updatefw
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/oarf_config_exmimo.oct</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.EXMIMO.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010112" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.BLADERF.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w BLADERF -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_bladerfdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.BLADERF.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010113" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.ETHERNET.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w None -t ETHERNET -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.ETHERNET.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010114" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.LMSSDR.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w LMSSDR -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_lmssdrdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.LMSSDR.Rel10</tags>
     <nruns>1</nruns>
     </testCase>


     <testCase id="010120" >
     <class>compilation</class>
     <desc>Build lte_softmodem.USRP.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w USRP -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_usrpdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.USRP.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010121" >
     <class>compilation</class>
     <desc>Build lte_softmodem.EXMIMO.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w EXMIMO -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/oarf_config_exmimo.oct</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.EXMIMO.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010122" >
     <class>compilation</class>
     <desc>Build lte_softmodem.BLADERF.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w BLADERF -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_bladerfdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.BLADERF.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010123" >
     <class>compilation</class>
     <desc>Build lte_softmodem.ETHERNET.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w None -t ETHERNET -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.ETHERNET.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010124" >
     <class>compilation</class>
     <desc>Build lte_softmodem.LMSSDR.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w LMSSDR -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_lmssdrdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.LMSSDR.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010130" >
     <class>compilation</class>
     <desc>Build phy unitary simulators + secuirity unitary tests</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--phy_simulators --core_simulators  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pucchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/prachsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pdcchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pbchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/mbmssim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia2</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>unitary-sim.Rel10</tags>
     <nruns>1</nruns>
     </testCase>


     <testCase id="010140" >
     <class>compilation</class>
     <desc>Build RRH Gateway for USRP(RF) + Ethernet (Transport)</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--RRH -w USRP -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_usrpdevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.USRP.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010141" >
     <class>compilation</class>
     <desc>Build RRH Gateway for EXMIMO(RF) + Ethernet (Transport)</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--RRH -w EXMIMO -t ETHNERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/updatefw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/oarf_config_exmimo.oct
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_exmimodevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.EXMIMO.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010142" >
     <class>compilation</class>
     <desc>Build RRH Gateway for BladeRF (RF) nad Ethernet (transport)</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--RRH -w BLADERF -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_bladerfdevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.BLADERF.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

    <testCase id="010143" >
     <class>compilation</class>
     <desc>Build RRH Gateway for LMSSDR (RF) and Ethernet (transport)</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--RRH -w LMSSDR -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_lmssdrdevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.LMSSDR.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

   <testCase id="010200">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <test_config_file></test_config_file>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -s15 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -s15 </main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010201">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <test_config_file></test_config_file>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -a -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -a -s15 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -a -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -a -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -a -s15 </main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010202">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
<pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <test_config_file></test_config_file>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -s15 </main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010203">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <test_config_file></test_config_file>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -a -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -a -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -a -s15</main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2  oaisim_nos1.tdd.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010204">
      <class>execution</class>
      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses</desc>
       <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <test_config_file></test_config_file>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26</main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010205">
      <class>execution</class>
      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses</desc>
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <test_config_file></test_config_file>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26 -a
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26  -a
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26 -a
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26  -a
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26 -a
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26  -a</main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010300">
      <class>execution</class>
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -s15</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010301">
      <class>execution</class>
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -a -s15</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags> 
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010302">
      <class>execution</class>
      <desc> Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -s15</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 </tags> 
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010303">
      <class>execution</class>
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -a -s15</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010304">
      <class>execution</class>
      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) without PHY_ABSTRACTION mode, ping from from eNB to UE, and for check for no packet losses</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010305">
      <class>execution</class>
      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check for no packet losses</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26 -a</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 </tags>
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010400">
      <class>execution</class>
      <desc>Check if eMBMS procedure is not finished completely, make sure that the SIB13/MCCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -Q3 -n 100 -b1 -u1</main_exec_args>
      <search_expr_true>"Found MBSFNAreaConfiguration from eNB 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>oaisim_noS1.eMBMS</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010401">
      <class>execution</class>
      <desc>Check if eMBMS multicast/broadcast data is received, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -T mscbr -Q3 -n 100 -b1 -u1</main_exec_args>
      <search_expr_true>"Received a multicast packet"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>oaisim_noS1.eMBMS</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010402">
      <class>execution</class>
      <desc>Check for eMBMS multicast/broadcast data received in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -F -T mscbr -Q3 -n 100 -b1 -u1</main_exec_args>
      <search_expr_true>"Received a multicast packet"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>oaisim_noS1.eMBMS</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010403">
      <class>execution</class>
      <desc>Check for eMBMS multicast/broadcast DF relaying working properly in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -c43 -F -T mbvbr -Q4 -j1 -n120</main_exec_args>
      <search_expr_true>"MTCH for sync area 1"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>oaisim_noS1.eMBMS</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015000">
      <class>execution</class>
      <desc>test_aes128_cmac_encrypt</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_aes128_cmac_encrypt</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015001">
      <class>execution</class>
      <desc>test_aes128_ctr_decrypt</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_aes128_ctr_decrypt</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015002">
      <class>execution</class>
      <desc>test_aes128_ctr_encrypt</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_aes128_ctr_encrypt</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015003">
      <class>execution</class>
      <desc>test_secu_kenb</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_kenb</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015004">
      <class>execution</class>
      <desc>test_secu_knas</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015005">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eea1</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas_encrypt_eea1</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015006">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eea2</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas_encrypt_eea2</tags>
      <nruns>3</nruns>
    </testCase>

   <testCase id="015007">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eia1</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas_encrypt_eia1</tags>
      <nruns>3</nruns>
    </testCase>

   <testCase id="015008">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eia2</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas_encrypt_eia2</tags>
      <nruns>3</nruns>
    </testCase>

   <testCase id="015009">
      <class>execution</class>
      <desc>test_kdf</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_kdf</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015100">
      <class>execution</class>
      <desc>dlsim test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB), 
      (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
      (Test 6, 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
      (Test 6b, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
      (Test 7, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
      (Test 7b, 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
      (Test 10, 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
      (Test 10b, 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
      (Test 11, 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))
      (TM2 Test 1 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
      (TM2 Test 1b 20 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)),
       </desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim</main_exec>
      <main_exec_args> -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
                       -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O70
                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
                       -m14 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L
                       -m15 -gG -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O30 -L
                       -m14 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O30 -L
                       -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L
                       -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70 -L
                       -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
		       -m14 -gF -s6.8  -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O70 -L
                       -m13 -gF -s5.9  -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O70 -L</main_exec_args>
      <tags>dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b</tags>
      <search_expr_true>"passed"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015101">
      <class>execution</class>
      <desc>ulsim Test cases. (Test 1, 5 MHz, FDD (MCS 5), AWGN, 6dB), 
             (Test 2, 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
             (Test 3, 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
             (Test 4, 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
             (Test 5, 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
             (Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim</main_exec>
      <main_exec_args> -B25 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
                       -B25 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
                        -B50 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L 
                       -B50 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
                        -B100 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
                       -B100 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L</main_exec_args>
     <tags>ulsim.test1 ulsim.test2 ulsim.test3 ulsim.test4 ulsim.test5 ulsim.test6</tags>
      <search_expr_true>"passed"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

  <testCase id="015500" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 7Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015501" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 14Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015502" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015503" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -f m -u</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 16M -i 1 -f m -u</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015504" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf     </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -f m -u </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33M -i 1 -f m -u  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015505" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c  192.172.0.2 -b 10Mbits/s   </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015506" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 7Mbits/s    </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015507" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 14Mbits/s    </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015508" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 28Mbits/s    </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script  5 lo  -s -i 1 -u -f m</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015509" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c  192.172.0.2 -b 16Mbits/s</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015510" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -s -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script  10 192.172.0.2 -u -c  192.172.0.2 -b 33Mbits/s -i 1 -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015511" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -s -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c  192.172.0.2 -b 33Mbits/s  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015512" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -c  192.172.0.1  </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015513" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -c  192.172.0.1  </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015514" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -c  192.172.0.1  </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015515" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015516" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf     </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015517" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2   -c  192.172.0.2   </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 




  <testCase id="015518" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -c  192.172.0.1     </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015519" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c  192.172.0.1     </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015520" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -c  192.172.0.1     </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script  5 lo  -s -i 1  -f m</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015521" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c  192.172.0.2 </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015522" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script  10 192.172.0.2 -c  192.172.0.2 -b 33Mbits/s -i 1 -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015523" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2  -c  192.172.0.2 -b 33Mbits/s  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 




  <testCase id="015600" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>calisson</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5:3\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.170.0.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5:4\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.170.1.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E  ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth5:1\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.170.0.1/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth5:2\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.170.1.1/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth5\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth5 add 192.172.0.1</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -i -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in;  $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_local.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="015601" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>calisson</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5:3\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.170.0.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5:4\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.170.1.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E  ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 14Mbits/s  -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth5:1\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.170.0.1/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth5:2\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.170.1.1/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth5\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false  </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ;  cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -i -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_local.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="015602" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>calisson</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5:3\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.170.0.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5:4\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.170.1.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E  ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth5:1\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.170.0.1/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth5:2\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.170.1.1/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth5\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -i -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_local.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="015603" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>calisson</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5:3\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.170.0.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5:4\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.170.1.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E  ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth5:1\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.170.0.1/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth5:2\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.170.1.1/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth5\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -i -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_local.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

   <testCase id="015604" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>calisson</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5:3\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.170.0.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5:4\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.170.1.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E  ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth5:1\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.170.0.1/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth5:2\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.170.1.1/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth5\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ;  cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -i -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db  </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_local.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

   <testCase id="015605" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>calisson</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5:3\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.170.0.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5:4\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.170.1.2/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E  ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=42.0Mbits/sec average=44.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth5:1\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.170.0.1/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth5:2\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.170.1.1/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth5\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false</HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ;  cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -i -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_local.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="015700" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 7Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
                     ETC/hss.conf MYSQL_pass \"linux\"
                     ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
                     ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}" 
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     ETC/mme.conf  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S11_MME   \"lo\"
                     ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME        \"127.0.11.1/8\"
                     ETC/mme.conf MME_PORT_FOR_S11_MME                   2123
                     ETC/mme.conf  SGW_IPV4_ADDRESS_FOR_S11           \"127.0.11.2/8\"
                     ETC/mme.conf  OUTPUT \"CONSOLE\"
                     ETC/mme.conf  HSS_HOSTNAME \"hss\"
                     ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
                     ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
                     ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11              \"lo\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11                \"127.0.11.2/8\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP      \"192.168.12.62/24\"
                     ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP         2152
                     ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI              \"192.168.12.62/24\"
                     ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
    <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur;  $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>
c
    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc  </EPC_main_exec>
    <EPC_main_exec_args>  </EPC_main_exec_args>
    <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db  </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="015701" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 14Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
                     ETC/hss.conf MYSQL_pass \"linux\"
                     ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
                     ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}" 
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     ETC/mme.conf  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S11_MME   \"lo\"
                     ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME        \"127.0.11.1/8\"
                     ETC/mme.conf MME_PORT_FOR_S11_MME                   2123
                     ETC/mme.conf  SGW_IPV4_ADDRESS_FOR_S11           \"127.0.11.2/8\"
                     ETC/mme.conf  OUTPUT \"CONSOLE\"
                     ETC/mme.conf  HSS_HOSTNAME \"hss\"
                     ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
                     ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
                     ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11              \"lo\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11                \"127.0.11.2/8\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP      \"192.168.12.62/24\"
                     ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP         2152
                     ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI              \"192.168.12.62/24\"
                     ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
    <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur;  $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>
c
    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc  </EPC_main_exec>
    <EPC_main_exec_args>  </EPC_main_exec_args>
    <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db  </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="015702" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E  ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf </eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
                     ETC/hss.conf MYSQL_pass \"linux\"
                     ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
                     ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}" 
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     ETC/mme.conf  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S11_MME   \"lo\"
                     ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME        \"127.0.11.1/8\"
                     ETC/mme.conf MME_PORT_FOR_S11_MME                   2123
                     ETC/mme.conf  SGW_IPV4_ADDRESS_FOR_S11           \"127.0.11.2/8\"
                     ETC/mme.conf  OUTPUT \"CONSOLE\"
                     ETC/mme.conf  HSS_HOSTNAME \"hss\"
                     ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
                     ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
                     ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11              \"lo\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11                \"127.0.11.2/8\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP      \"192.168.12.62/24\"
                     ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP         2152
                     ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI              \"192.168.12.62/24\"
                     ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
    <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur;  $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>
c
    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc  </EPC_main_exec>
    <EPC_main_exec_args>  </EPC_main_exec_args>
    <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db  </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="015703" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
                     ETC/hss.conf MYSQL_pass \"linux\"
                     ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
                     ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}" 
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     ETC/mme.conf  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S11_MME   \"lo\"
                     ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME        \"127.0.11.1/8\"
                     ETC/mme.conf MME_PORT_FOR_S11_MME                   2123
                     ETC/mme.conf  SGW_IPV4_ADDRESS_FOR_S11           \"127.0.11.2/8\"
                     ETC/mme.conf  OUTPUT \"CONSOLE\"
                     ETC/mme.conf  HSS_HOSTNAME \"hss\"
                     ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
                     ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
                     ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11              \"lo\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11                \"127.0.11.2/8\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP      \"192.168.12.62/24\"
                     ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP         2152
                     ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI              \"192.168.12.62/24\"
                     ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
    <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur;  $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>
c
    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc  </EPC_main_exec>
    <EPC_main_exec_args>  </EPC_main_exec_args>
    <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db  </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

   <testCase id="015704" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
                     ETC/hss.conf MYSQL_pass \"linux\"
                     ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
                     ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}" 
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     ETC/mme.conf  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S11_MME   \"lo\"
                     ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME        \"127.0.11.1/8\"
                     ETC/mme.conf MME_PORT_FOR_S11_MME                   2123
                     ETC/mme.conf  SGW_IPV4_ADDRESS_FOR_S11           \"127.0.11.2/8\"
                     ETC/mme.conf  OUTPUT \"CONSOLE\"
                     ETC/mme.conf  HSS_HOSTNAME \"hss\"
                     ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
                     ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
                     ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11              \"lo\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11                \"127.0.11.2/8\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP      \"192.168.12.62/24\"
                     ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP         2152
                     ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI              \"192.168.12.62/24\"
                     ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
    <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur;  $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>
c
    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc  </EPC_main_exec>
    <EPC_main_exec_args>  </EPC_main_exec_args>
    <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db  </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

   <testCase id="015705" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 9M -R </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
                     ETC/hss.conf MYSQL_pass \"linux\"
                     ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
                     ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}" 
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     ETC/mme.conf  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     ETC/mme.conf  MME_INTERFACE_NAME_FOR_S11_MME   \"lo\"
                     ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME        \"127.0.11.1/8\"
                     ETC/mme.conf MME_PORT_FOR_S11_MME                   2123
                     ETC/mme.conf  SGW_IPV4_ADDRESS_FOR_S11           \"127.0.11.2/8\"
                     ETC/mme.conf  OUTPUT \"CONSOLE\"
                     ETC/mme.conf  HSS_HOSTNAME \"hss\"
                     ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
                     ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
                     ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11              \"lo\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11                \"127.0.11.2/8\"
                     ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP      \"192.168.12.62/24\"
                     ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP         2152
                     ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI              \"192.168.12.62/24\"
                     ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
    <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur;  $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>
c
    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc  </EPC_main_exec>
    <EPC_main_exec_args>  </EPC_main_exec_args>
    <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db  </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>


  <testCase id="015800" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 7Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m -u</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015801" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -u -c  192.172.0.1 -b 14Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015802" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  pdsch_referenceSignalPower -23
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -u -c  192.172.0.1 -b 17Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script  5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015803" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s  -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1 -u -f m -b 16M </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015804" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33Mbits/s -i 1 -f m -u     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015805" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  pdsch_referenceSignalPower -23
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015806" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -c  192.172.0.1  -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015807" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0   -c  192.172.0.1   -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015808" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  pdsch_referenceSignalPower -23
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -c  192.172.0.1    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script  5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015809" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1  -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015810" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015811" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  pdsch_referenceSignalPower -23
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 75 lo -c  192.172.0.2     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015812" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 7Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m -u</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015813" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -u -c  192.172.0.1 -b 14Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015814" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  pdsch_referenceSignalPower  -23
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -u -c  192.172.0.1 -b 28Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script  5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015815" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s  -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1 -u -f m -b 16M </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015816" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33Mbits/s -i 1 -f m -u     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase>

  <testCase id="015817" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  pdsch_referenceSignalPower  -23
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c  192.172.0.2 -b 33Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015818" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -c  192.172.0.1  -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015819" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0   -c  192.172.0.1   -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015820" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  pdsch_referenceSignalPower  -23
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0  -c  192.172.0.1    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script  5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015821" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1  -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015822" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015823" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  pdsch_referenceSignalPower  -23
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1  -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2  -i 1  -f m   </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 



  <testCase id="016000" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ;  sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false  </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db    </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>



  <testCase id="016001" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l  --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in </EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db  </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="016002" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false</HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="016003" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l </EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false  </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args>  -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

   <testCase id="016004" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ;  sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue</UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false</HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ;  cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

   <testCase id="016005" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ;  sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPx310.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="016100" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail </eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 7Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="016101" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1                     
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 14Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="016102" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="016103" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="016104" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 20M -R</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m   </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="016105" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1                     
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 



  <testCase id="016300" >
   <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ;  sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  $OPENAIR_TESTDIR/enb.conf </eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>


    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>



  <testCase id="016301" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1                     
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ;  sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="016302" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ;  sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue</UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false  </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec    </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

  <testCase id="016303" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ;  sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l  --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args>  -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db  </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

   <testCase id="016304" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ;  sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue</UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>

   <testCase id="016305" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>nano</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  nb_antennas_tx 1                     
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf   ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf  $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.conf.in  MCC \"208\"
                     BUILD/EPC/epc.conf.in  MNC \"92\"
                     BUILD/EPC/epc.conf.in  TAC \"1\"
                     BUILD/EPC/epc.conf.in  MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
                     BUILD/EPC/epc.conf.in  MME_IPV4_ADDRESS_FOR_S1_MME  \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP    \"eth0\";
                     BUILD/EPC/epc.conf.in   SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP       \"192.168.12.62/24\"; 
                     BUILD/EPC/epc.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
                     BUILD/EPC/epc.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
                     BUILD/EPC/epc.conf.in   IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
    <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l  --debug --random false</HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc  </EPC_main_exec>
    <EPC_main_exec_args> -r </EPC_main_exec_args>
    <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss  --export-db $OPENAIRCN_TESTDIR/hss_export.db   </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s     ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true></EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>EXMIMO.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
   </testCase>


  <testCase id="016500" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  pdsch_referenceSignalPower -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>BladeRF.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="016501" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  </eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>BladeRF.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="016502" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  pdsch_referenceSignalPower -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  </eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>BladeRF.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="016503" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  pdsch_referenceSignalPower -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  </eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>BladeRF.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="016504" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>BladeRF.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="016505" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  pdsch_referenceSignalPower -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash  </eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>BladeRF.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017000" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tx_gain 60
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  rx_gain 111
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  pdsch_referenceSignalPower -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w LMSSDR -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>LMSSDR.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="017001" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tx_gain 60
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  rx_gain 111
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  pdsch_referenceSignalPower -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w LMSSDR -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  --rf-config-file    $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>LMSSDR.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017002" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tx_gain 60
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  rx_gain 111
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  pdsch_referenceSignalPower -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w LMSSDR -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf     --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_20MHz_rx19dB_txfull.ini </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>LMSSDR.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017003" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tx_gain 60
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  rx_gain 111
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w LMSSDR -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf    --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>LMSSDR.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017004" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tx_gain 60
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  rx_gain 111
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w LMSSDR -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf    --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini</eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>SoDeRa.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017005" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  tx_gain 60
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  rx_gain 111
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  pdsch_referenceSignalPower -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w LMSSDR -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf     --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_20MHz_rx19dB_txfull.ini</eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>SoDeRa.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017500" >
    <class>lte-softmodem</class>
    <desc></desc>
    <RRH>calisson</RRH>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <eNB>mozart</eNB>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  pdsch_referenceSignalPower  -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_PORT_FOR_S1U                     2152
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rrh_gw_config   "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
    <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
    <RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
    <RRH_pre_exec_args></RRH_pre_exec_args>
    <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
    <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
    <RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>



    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="017501" >
    <class>lte-softmodem</class>
    <desc></desc>
    <RRH>calisson</RRH>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  pdsch_referenceSignalPower  -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_PORT_FOR_S1U                     2152
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rrh_gw_config   "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
    <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
    <RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
    <RRH_pre_exec_args></RRH_pre_exec_args>
    <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
    <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
    <RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017502" >
    <class>lte-softmodem</class>
    <desc></desc>
    <RRH>calisson</RRH>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_PORT_FOR_S1U                     2152
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rrh_gw_config   "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";"</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sleep 5; sudo -E chrt -f 99  $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
    <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
    <RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
    <RRH_pre_exec_args></RRH_pre_exec_args>
    <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
    <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
    <RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017503" >
    <class>lte-softmodem</class>
    <desc></desc>
    <RRH>calisson</RRH>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  pdsch_referenceSignalPower  -26
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_PORT_FOR_S1U                     2152
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rrh_gw_config   "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
    <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
    <RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
    <RRH_pre_exec_args></RRH_pre_exec_args>
    <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
    <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
    <RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo  -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017504" >
    <class>lte-softmodem</class>
    <desc></desc>
    <RRH>calisson</RRH>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  pdsch_referenceSignalPower  -29
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_PORT_FOR_S1U                     2152
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rrh_gw_config   "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
    <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
    <RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
    <RRH_pre_exec_args></RRH_pre_exec_args>
    <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
    <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
    <RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c  192.172.0.2 -b 10Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="017505" >
    <class>lte-softmodem</class>
    <desc></desc>
    <RRH>calisson</RRH>
    <eNB>mozart</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth6\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.111/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  ENB_PORT_FOR_S1U                     2152
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf  rrh_gw_config   "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";"</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>sleep 5; $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
    <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
    <RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
    <RRH_pre_exec_args></RRH_pre_exec_args>
    <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
    <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
    <RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec   </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c  192.172.0.2 -b 15Mbits/s     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="025500" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c  192.172.0.1 -b 7Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="025501" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c  192.172.0.1 -b 14Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025502" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf   -E  </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025503" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf   </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m  </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
    <UE_search_expr_false></UE_search_expr_false>
    
    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 16Mbits/s -i 1 -f m -u</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025504" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m   </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec</UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33Mbits/s -i 1 -f m -u </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025505" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -E    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec</UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 40Mbits/s -i 1 -f m -u     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025506" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E  -c  192.172.0.1     -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.TCP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="025507" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E  -c  192.172.0.1     -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.TCP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025508" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E  -c  192.172.0.1    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.TCP.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025509" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1  -f m  </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
    <UE_search_expr_false></UE_search_expr_false>
    
    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2  -i 1 -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.TCP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025510" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1  -f m   </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec</UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2  -i 1 -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.TCP.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025511" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec</UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10  192.172.0.2 -c 192.172.0.2  -i 1 -f m      </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.20MHz.TCP.FDD.Band_7.DL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


<testCase id="025512" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c  192.172.0.1 -b 7Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="025513" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c  192.172.0.1 -b 14Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025514" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025515" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m  </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
    <UE_search_expr_false></UE_search_expr_false>
    
    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 16Mbits/s -i 1 -f m -u</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025516" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m   </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec</UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33Mbits/s -i 1 -f m -u </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025517" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec</UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 40Mbits/s -i 1 -f m -u     </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025518" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E  -c  192.172.0.1     -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="025519" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E  -c  192.172.0.1     -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025520" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E  -c  192.172.0.1    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1  -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025521" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1  -f m  </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
    <UE_search_expr_false></UE_search_expr_false>
    
    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2  -i 1 -f m </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025522" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1  -f m   </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec</UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2  -i 1 -f m  </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="025523" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>hutch</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  pdsch_referenceSignalPower  -32
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antenna_ports 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_rx  2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  nb_antennas_tx 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ue_TransmissionMode 2
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf    </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue  </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1  -f m </UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec</UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>


    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>

    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10  192.172.0.2 -c 192.172.0.2  -i 1 -f m      </EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.SonyExperiaM4.20MHz.TCP.FDD.Band_7.DL.2TX.2RX.TM2</tags>
    <nruns>10</nruns>
    </testCase> 



  </testCaseList>