Added updated configuration file for psfch

sl_preconfiguration.conf

+SIDELINK_PRECONFIGURATION = (
+  {
+    # TDD ULDL CONFIG used for sidelink
+    sl_dl_UL_TransmissionPeriodicity = 6;
+    sl_nrofDownlinkSlots             = 1;
+    sl_nrofDownlinkSymbols           = 10;
+    sl_nrofUplinkSlots               = 8;
+    sl_nrofUplinkSymbols             = 4;
+
+    sl_FrequencyCommonConfig = (
+      {
+        sl_offstToCarrier                   = 0;
+        sl_subcarrierSpacing                = 1;//0-15Khz, 1-30Khz
+        sl_carrierBandwidth                 = 106;//numPRBs
+#NR bands for Sidelink n47, n38. N47 - 5855Mhz - 5925Mhz
+#SL SSB chosen to be located from RB10 to RB21. points to the middle of the SSB block.
+#SSB location should be within Sidelink BWP
+# this is 2584.95 MHz => 301 REs from PointA 25 PRBs + 1 RE
+        sl_absoluteFrequencySSB             = 516990;
+# this is 2575.92 MHz (center frequency is 2585.1 MHz
+        sl_absoluteFrequencyPointA          = 515184;
+      }
+    );
+
+    sl_BWP = (
+      {
+#RB start 0, RB size = 106. occupies complete Bw.
+        sl_locationAndBandwidth             = 28875;
+#Num Symbols used for Sidelink in an uplink slot
+#Value can be between symbols 7 to 14
+        sl_LengthSymbols                    = 5;
+#Sidelink Starting symbol in a slot
+#Value can be between symbols 0 to 7
+        sl_StartSymbol                      = 0;
+      }
+    );
+
+    sl_syncCfg = (
+      {
+#NUM SL-SSB within 16 frames
+        sl_NumSSB_WithinPeriod_0            = 4;
+#Slot Offset for the first txn in the 16 frame period
+        sl_TimeOffsetSSB_0                  = 8;
+#interval in slots for repetition of SL-SSB
+        sl_TimeInterval_0                   = 120;
+      }
+    );
+
+    sl_RxResPools = (
+      {
+#Number of symbols which carry PSCCH.
+#Possible values 0 means 2 symbols, 1 - means 3 symbols.
+        sl_TimeResourcePSCCH            = 0;
+#Number of RBS which carry PSCCH
+#Possible values {n10,n12,n15,n20,n25}
+        sl_FreqResourcePSCCH            = 1; //12RBs
+#Size of subchannel in RBs
+#Possible values - {n10,n12,n15,n20,n25,n50,n75,n100}
+        sl_SubchannelSize               = 5;//10RBs
+#start in RB of the lowest subchannel in a rpool
+        sl_StartRB_Subchannel           = 0;
+#number of PRBs in a rpool
+        sl_RB_Number                    = 50;
+        sl_NumSubchannel                = 1;
+# period of PSFCH resource in units of slots within this resource pool
+# Possible values sl0 means no PSFCH resource, {sl0, sl1, sl2, sl4}
+        sl_PSFCH_Period                 = 3; //sl4
+# set of PRBs used for PSFCH transmission and reception
+# leftmost bit of the bitmap is lowest RB index in the resource pool
+# value 0 in the bitmap means PRB is not used for PSFCH operations
+        sl_PSFCH_RB_Set                 = 0xAAAAAAAAAAAA8;
+# Number of cyclic shift pairs used for a PSFCH transmission that can be multiplexed in a PRB
+# Possible values {n1, n2, n3, n4}
+        sl_NumMuxCS_Pair                =  1;
+# Minimum time gap between PSFCH and the associated PSSCH in the unit of slots {sl2, sl3}
+        sl_MinTimeGapPSFCH              = 1; //sl3
+# Scrambling ID {0..1023} for sequence hopping of the PSFCH used in the resource pool
+        sl_PSFCH_HopID                  = 1;
+# Number of PSFCH resources available {startSubCH, allocSubCH} for multiplexing HARQ-ACK information in a PSFCH transmission
+        sl_PSFCH_CandidateResourceType  = 0; // startSubCH
+      }
+    );
+
+    sl_TxResPools = (
+      {
+#Number of symbols which carry PSCCH.
+#Possible values 0 means 2 symbols, 1 - means 3 symbols.
+        sl_TimeResourcePSCCH            = 0;
+#Number of RBS which carry PSCCH
+#Possible values {n10,n12,n15,n20,n25}
+        sl_FreqResourcePSCCH            = 1; //12RBs
+#Size of subchannel in RBs
+#Possible values - {n10,n12,n15,n20,n25,n50,n75,n100}
+        sl_SubchannelSize               = 5;//50RBs
+#start in RB of the lowest subchannel in a rpool
+        sl_StartRB_Subchannel           = 0;
+#number of PRBs in a rpool
+        sl_RB_Number                    = 50;
+        sl_NumSubchannel                = 1;
+      }
+    );
+
+    sl_UEINFO = (
+      {
+        srcid = 0;
+        thirdOctet = 0;
+        fourthOctet = 1;
+      }
+    );
+ }
+);
\ No newline at end of file