CU config

cu.conf

+Active_gNBs = ( "gNB-CU-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+Num_Threads_PUSCH = 8;
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID = 0xc00;
+
+#     cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-CU-in-docker";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1 }) }); 
+
+    nr_cellid = 1L;
+
+    tr_s_preference = "f1";
+
+    local_s_if_name = "eth0";
+    local_s_address = "16.1.1.3";
+    remote_s_address = "16.1.1.2";
+    local_s_portc   = 501;
+    local_s_portd   = 2154;
+    remote_s_portc  = 500;
+    remote_s_portd  = 2153;
+    #min_rxtxtime    = 6;
+    
+    enable_sdap = 1;
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address      = ( { ipv4       = "192.168.70.132";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "enp3s0";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.70.129";
+        GNB_INTERFACE_NAME_FOR_NGU               = "enp3s0";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.70.129";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+  }
+);
+
+e2_agent = {
+  #near_ric_ip_addr = "16.1.1.3";
+  #near_ric_ip_addr = "10.104.66.177";
+  near_ric_ip_addr = "16.1.1.3";
+  sm_dir = "/usr/local/lib/flexric/"
+}
+
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="debug";
+  f1ap_log_level                        ="info";
+};