Commit 452a01c7 authored by Lionel Gauthier's avatar Lionel Gauthier

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5817 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 64a04b55
Active_eNBs = ( "eNB_Eurecom_0");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
eNB_ID = 347472;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_0";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "10";
#10;
// Default Paging DRX of the eNB as defined in TS 36.304
default_paging_drx = "PAGING_DRX_256";
////////// Physical parameters:
frame_type = "TDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 33;
downlink_frequency = 1907600000;
uplink_frequency_offset = 0.0;
mme_ip_address = ( { ipv4 = "192.168.56.1";
ipv6 = "2192:168:10::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.56.101/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth1";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.56.101/24";
};
}
);
MME :
{
REALM = "eur";
# Define the limits of the system in terms of served eNB and served UE.
# When the limits will be reached, overload procedure will take place.
MAXENB = 10;
MAXUE = 100;
RELATIVE_CAPACITY = 10;
# Display statistics about whole system (expressed in seconds)
MME_STATISTIC_TIMER = 10;
EMERGENCY_ATTACH_SUPPORTED = "no";
UNAUTHENTICATED_IMSI_SUPPORTED = "no";
# VERBOSITY: none, info, annoying
VERBOSITY = "none";
IP_CAPABILITY = "IPV4V6";
INTERTASK_INTERFACE :
{
# max queue size per task
ITTI_QUEUE_SIZE = 2000000;
};
S6A :
{
MME_INTERFACE_NAME_FOR_S6A = "vboxnet1";
MME_IPV4_ADDRESS_FOR_S6A = "192.168.57.1/24";
S6A_CONF = "./UTILS/CONF/s6a.conf";
};
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 32;
SCTP_OUTSTREAMS = 32;
};
# ------- S1AP definitions
S1AP :
{
# outcome drop timer value (seconds)
S1AP_OUTCOME_TIMER = 10;
};
# ------- MME served GUMMEI
GUMMEI :
{
# MME code DEFAULT = 0
# size = 8 bits
# maximum of 256 values, comma separated
MME_CODE = [ 30 , 31, 32, 33, 34, 35, 36, 56 , 1 , 8 ];
# MME GROUP ID DEFAULT = 0
# size = 16 bits
# maximum of 65535 values, comma separated
MME_GID = [ 3 , 4 , 5 , 30 , 8 , 9 , 50021 ];
# TA (mcc.mnc:tracking area code) DEFAULT = 208.34:0
# max values = 999.999:65535
# maximum of 32 values, comma separated
PLMN = (
{MCC="208" ; MNC="10"; TAC = "1"; },
{MCC="209" ; MNC="130"; TAC = "4"; },
{MCC="209" ; MNC="012"; TAC = "2"; },
{MCC="208" ; MNC="35"; TAC = "8"; }
);
};
NAS :
{
# 3GPP TS 33.401 section 7.2.4.3 Procedures for NAS algorithm selection
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "EIA1" , "EIA2" , "EIA0" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "EEA0" , "EEA1" , "EEA2" ];
};
NETWORK_INTERFACES :
{
MME_INTERFACE_NAME_FOR_S1_MME = "vboxnet0";
MME_IPV4_ADDRESS_FOR_S1_MME = "192.168.56.1/24";
MME_INTERFACE_NAME_FOR_S11_MME = "none";
MME_IPV4_ADDRESS_FOR_S11_MME = "0.0.0.0/24";
};
};
S-GW :
{
NETWORK_INTERFACES :
{
SGW_INTERFACE_NAME_FOR_S11 = "none";
SGW_IPV4_ADDRESS_FOR_S11 = "0.0.0.0/24";
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "vboxnet0";
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.168.56.1/24";
SGW_INTERFACE_NAME_FOR_S5_S8_UP = "none";
SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "0.0.0.0/24";
};
};
P-GW =
{
NETWORK_INTERFACES :
{
PGW_INTERFACE_NAME_FOR_S5_S8 = "none";
PGW_IPV4_ADDRESS_FOR_S5_S8 = "0.0.0.0/24";
PGW_INTERFACE_NAME_FOR_SGI = "eth1";
PGW_IPV4_ADDRESS_FOR_SGI = "192.168.13.178/24";
};
IP_ADDRESS_POOL :
{
IPV4_LIST = (
"192.168.87.32",
"192.168.88.0/24",
"192.168.90.0/24"
);
IPV6_LIST = (
"2014:02:26::0/120"
);
};
APN :
{
};
};
HSS =
{
NETWORK_INTERFACES :
{
HSS_INTERFACE_NAME_FOR_S6A = "none";
HSS_IPV4_ADDRESS_FOR_S6A = "192.168.57.101/24";
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment