MR2496 fapi new data indicator as bool and storage of previous NDI value to HARQ structures

nfapi/open-nFAPI/nfapi/public_inc/fapi_nr_ue_interface.h

@@ -239,9 +239,9 @@ typedef struct {
 
 typedef struct
 {
-  uint8_t  rv_index;
-  uint8_t  harq_process_id;
-  uint8_t  new_data_indicator;
+  uint8_t rv_index;
+  uint8_t harq_process_id;
+  bool new_data_indicator;
   uint32_t tb_size;
   uint16_t num_cb;
   uint8_t cb_present_and_position[(NFAPI_UE_MAX_NUM_CB+7) / 8];
@@ -455,13 +455,13 @@ typedef struct {
   uint8_t rate_matching_ind;
   uint8_t zp_csi_rs_trigger;
   uint8_t mcs;
-  uint8_t ndi;
+  bool new_data_indicator;
   uint8_t rv;
   uint16_t targetCodeRate;
   uint8_t qamModOrder;
   uint32_t TBS;
   uint8_t tb2_mcs;
-  uint8_t tb2_ndi;
+  bool tb2_new_data_indicator;
   uint8_t tb2_rv;
   uint8_t harq_process_nbr;
   vrb_to_prb_mapping_t vrb_to_prb_mapping;

openair1/PHY/NR_UE_TRANSPORT/nr_transport_ue.h

@@ -104,8 +104,6 @@ typedef struct {
 typedef struct {
   /// Indicator of first reception
   uint8_t first_rx;
-  /// Last Ndi received for this process on DCI (used for C-RNTI only)
-  uint8_t Ndi;
   /// DLSCH status flag indicating
   SCH_status_t status;
   /// Transport block size

openair1/SCHED_NR_UE/fapi_nr_ue_l1.c

@@ -304,14 +304,14 @@ static void configure_dlsch(NR_UE_DLSCH_t *dlsch0,
     if ((dlsch_config_pdu->dmrs_ports>>i)&0x01) Nl += 1;
   }
   dlsch0->Nl = Nl;
-  if (dlsch_config_pdu->ndi) {
+  if (dlsch_config_pdu->new_data_indicator) {
     dlsch0_harq->first_rx = true;
     dlsch0_harq->DLround = 0;
   } else {
     dlsch0_harq->first_rx = false;
     dlsch0_harq->DLround++;
   }
-  downlink_harq_process(dlsch0_harq, current_harq_pid, dlsch_config_pdu->ndi, dlsch_config_pdu->rv, dlsch0->rnti_type);
+  downlink_harq_process(dlsch0_harq, current_harq_pid, dlsch_config_pdu->new_data_indicator, dlsch_config_pdu->rv, dlsch0->rnti_type);
   if (dlsch0_harq->status != ACTIVE) {
     // dlsch0_harq->status not ACTIVE due to false retransmission
     // Reset the following flag to skip PDSCH procedures in that case and retrasmit harq status

openair1/SCHED_NR_UE/harq_nr.c

@@ -115,7 +115,6 @@ void init_downlink_harq_status(NR_DL_UE_HARQ_t *dl_harq)
   dl_harq->status = SCH_IDLE;
   dl_harq->first_rx = 1;
   dl_harq->DLround  = 0;
-  dl_harq->Ndi = 2; // set to an invalid value
   dl_harq->ack = DL_ACKNACK_NO_SET;
 }
 
@@ -152,31 +151,9 @@ void downlink_harq_process(NR_DL_UE_HARQ_t *dl_harq, int harq_pid, int dci_ndi,
           rv,
           dci_ndi,
           rnti_type,
-          dl_harq->Ndi != dci_ndi ? "yes" : "no");
+          dci_ndi ? "yes" : "no");
     AssertFatal(rv<4 && rv>=0, "invalid redondancy version %d\n", rv);
-    if (dci_ndi!=dl_harq->Ndi) {
-      if (dl_harq->ack == DL_NACK)
-        LOG_D(PHY,"New transmission on a harq pid (%d) never acknowledged\n", harq_pid);
-      else
-         LOG_D(PHY,"Starting new transmission on a harq pid (%d)\n", harq_pid);
-    } else {
-      if (dl_harq->ack != DL_NACK)
-        LOG_D(PHY,"gNB asked for retransmission even if we sent ACK\n");
-      else
-        LOG_D(PHY,"Starting retransmission on a harq pid (%d), rv (%d)\n", harq_pid, rv);
-    }
-
-    if (dci_ndi!=dl_harq->Ndi) {
-      dl_harq->first_rx = true;
-      dl_harq->DLround = 0;
-    } else {
-      dl_harq->first_rx = false;
-      dl_harq->DLround++;
-    }
-    
     dl_harq->status = ACTIVE;
-
-    dl_harq->Ndi = dci_ndi;
   }
 }
 

openair2/LAYER2/NR_MAC_UE/mac_defs.h

@@ -347,11 +347,13 @@ typedef struct {
   int8_t delta_pucch;
   uint32_t R;
   uint32_t TBS;
+  int last_ndi;
 } NR_UE_HARQ_STATUS_t;
 
 typedef struct {
   uint32_t R;
   uint32_t TBS;
+  int last_ndi;
 } NR_UL_HARQ_INFO_t;
 
 typedef struct {
@@ -503,9 +505,6 @@ typedef struct NR_UE_MAC_INST_s {
   /// measurements from CSI-RS
   fapi_nr_csirs_measurements_t csirs_measurements;
 
-  /// Last NDI of UL HARQ processes
-  int DL_ndi[NR_MAX_HARQ_PROCESSES];
-  int UL_ndi[NR_MAX_HARQ_PROCESSES];
   ////	FAPI-like interface message
   fapi_nr_ul_config_request_t *ul_config_request;
   fapi_nr_dl_config_request_t *dl_config_request;

openair2/LAYER2/NR_MAC_UE/main_ue_nr.c

@@ -80,6 +80,10 @@ void nr_ue_init_mac(module_id_t module_idP)
     memset(&mac->ssb_list[i], 0, sizeof(mac->ssb_list[i]));
     memset(&mac->prach_assoc_pattern[i], 0, sizeof(mac->prach_assoc_pattern[i]));
   }
+  for (int k = 0; k < NR_MAX_HARQ_PROCESSES; k++) {
+    mac->ul_harq_info[k].last_ndi = -1; // initialize to invalid value
+    mac->dl_harq_info[k].last_ndi = -1; // initialize to invalid value
+  }
 }
 
 void nr_ue_mac_default_configs(NR_UE_MAC_INST_t *mac)
@@ -107,11 +111,6 @@ void nr_ue_mac_default_configs(NR_UE_MAC_INST_t *mac)
     mac->scheduling_info.lc_sched_info[i].LCID_status = false;
     mac->scheduling_info.lc_sched_info[i].LCID_buffer_remain = 0;
   }
-
-  for (int k = 0; k < NR_MAX_HARQ_PROCESSES; k++) {
-    mac->UL_ndi[k] = -1; // initialize to invalid value
-    mac->DL_ndi[k] = -1; // initialize to invalid value
-  }
 }
 
 NR_UE_MAC_INST_t *nr_l2_init_ue(int nb_inst)
@@ -147,6 +146,7 @@ void reset_mac_inst(NR_UE_MAC_INST_t *nr_mac)
   // MAC reset according to 38.321 Section 5.12
 
   nr_ue_mac_default_configs(nr_mac);
+
   // initialize Bj for each logical channel to zero
   // Done in default config but to -1 (is that correct?)
 
@@ -158,7 +158,7 @@ void reset_mac_inst(NR_UE_MAC_INST_t *nr_mac)
 
   // set the NDIs for all uplink HARQ processes to the value 0
   for (int k = 0; k < NR_MAX_HARQ_PROCESSES; k++)
-    nr_mac->UL_ndi[k] = -1; // initialize to invalid value
+    nr_mac->ul_harq_info[k].last_ndi = -1; // initialize to invalid value
 
   // stop any ongoing RACH procedure
   if (nr_mac->ra.ra_state < RA_SUCCEEDED)
@@ -184,7 +184,8 @@ void reset_mac_inst(NR_UE_MAC_INST_t *nr_mac)
     memset(&nr_mac->dl_harq_info[k], 0, sizeof(NR_UE_HARQ_STATUS_t));
 
   // for each DL HARQ process, consider the next received transmission for a TB as the very first transmission
-  // TODO there is nothing in the MAC indicating first transmission
+  for (int k = 0; k < NR_MAX_HARQ_PROCESSES; k++)
+    nr_mac->dl_harq_info[k].last_ndi = -1; // initialize to invalid value
 
   // release, if any, Temporary C-RNTI
   nr_mac->ra.t_crnti = 0;

openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c

@@ -684,18 +684,18 @@ static int nr_ue_process_dci_dl_10(module_id_t module_id,
   /* NDI (only if CRC scrambled by C-RNTI or CS-RNTI or new-RNTI or TC-RNTI)*/
   if (dl_conf_req->pdu_type == FAPI_NR_DL_CONFIG_TYPE_SI_DLSCH ||
       dl_conf_req->pdu_type == FAPI_NR_DL_CONFIG_TYPE_RA_DLSCH ||
-      dci->ndi != mac->DL_ndi[dci->harq_pid]) {
+      dci->ndi != current_harq->last_ndi) {
     // new data
-    dlsch_pdu->ndi = 1;
+    dlsch_pdu->new_data_indicator = true;
     current_harq->R = 0;
     current_harq->TBS = 0;
   }
   else
-    dlsch_pdu->ndi = 0;
+    dlsch_pdu->new_data_indicator = false;
 
   if (dl_conf_req->pdu_type != FAPI_NR_DL_CONFIG_TYPE_SI_DLSCH &&
       dl_conf_req->pdu_type != FAPI_NR_DL_CONFIG_TYPE_RA_DLSCH) {
-    mac->DL_ndi[dci->harq_pid] = dci->ndi;
+    current_harq->last_ndi = dci->ndi;
   }
 
   dlsch_pdu->qamModOrder = nr_get_Qm_dl(dlsch_pdu->mcs, dlsch_pdu->mcs_table);
@@ -723,10 +723,10 @@ static int nr_ue_process_dci_dl_10(module_id_t module_id,
                                     1);
     // storing for possible retransmissions
     current_harq->R = dlsch_pdu->targetCodeRate;
-    if (dlsch_pdu->ndi == 0 && current_harq->TBS != dlsch_pdu->TBS) {
+    if (!dlsch_pdu->new_data_indicator && current_harq->TBS != dlsch_pdu->TBS) {
       LOG_W(NR_MAC, "NDI indicates re-transmission but computed TBS %d doesn't match with what previously stored %d\n",
             dlsch_pdu->TBS, current_harq->TBS);
-      dlsch_pdu->ndi = 1; // treated as new data
+      dlsch_pdu->new_data_indicator = true; // treated as new data
     }
     current_harq->TBS = dlsch_pdu->TBS;
   }
@@ -825,7 +825,7 @@ static int nr_ue_process_dci_dl_10(module_id_t module_id,
         "scaling_factor_S=%f\n>>> tpc_pucch=%d\n>>> pucch_res_ind=%d\n>>> pdsch_to_harq_feedback_time_ind=%d\n",
         dlsch_pdu->vrb_to_prb_mapping,
         dlsch_pdu->mcs,
-        dlsch_pdu->ndi,
+        dlsch_pdu->new_data_indicator,
         dlsch_pdu->rv,
         dlsch_pdu->harq_process_nbr,
         dci->dai[0].val,
@@ -986,22 +986,22 @@ static int nr_ue_process_dci_dl_11(module_id_t module_id,
   dlsch_pdu->mcs = dci->mcs;
   /* NDI (for transport block 1)*/
   NR_UE_HARQ_STATUS_t *current_harq = &mac->dl_harq_info[dci->harq_pid];
-  if (dci->ndi != mac->DL_ndi[dci->harq_pid]) {
+  if (dci->ndi != current_harq->last_ndi) {
     // new data
-    dlsch_pdu->ndi = 1;
+    dlsch_pdu->new_data_indicator = true;
     current_harq->R = 0;
     current_harq->TBS = 0;
   }
   else {
-    dlsch_pdu->ndi = 0;
+    dlsch_pdu->new_data_indicator = false;
   }
-  mac->DL_ndi[dci->harq_pid] = dci->ndi;
+  current_harq->last_ndi = dci->ndi;
   /* RV (for transport block 1)*/
   dlsch_pdu->rv = dci->rv;
   /* MCS (for transport block 2)*/
   dlsch_pdu->tb2_mcs = dci->mcs2.val;
   /* NDI (for transport block 2)*/
-  dlsch_pdu->tb2_ndi = dci->ndi2.val;
+  dlsch_pdu->tb2_new_data_indicator = dci->ndi2.val;
   /* RV (for transport block 2)*/
   dlsch_pdu->tb2_rv = dci->rv2.val;
   /* HARQ_PROCESS_NUMBER */
@@ -1170,10 +1170,10 @@ static int nr_ue_process_dci_dl_11(module_id_t module_id,
                                     0,
                                     Nl);
     // storing for possible retransmissions
-    if (dlsch_pdu->ndi == 0 && current_harq->TBS != dlsch_pdu->TBS) {
+    if (!dlsch_pdu->new_data_indicator && current_harq->TBS != dlsch_pdu->TBS) {
       LOG_W(NR_MAC, "NDI indicates re-transmission but computed TBS %d doesn't match with what previously stored %d\n",
             dlsch_pdu->TBS, current_harq->TBS);
-      dlsch_pdu->ndi = 1; // treated as new data
+      dlsch_pdu->new_data_indicator = true; // treated as new data
     }
     current_harq->R = dlsch_pdu->targetCodeRate;
     current_harq->TBS = dlsch_pdu->TBS;

openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c

@@ -651,13 +651,14 @@ int nr_config_pusch_pdu(NR_UE_MAC_INST_t *mac,
     }
 
     /* NDI */
-    pusch_config_pdu->pusch_data.new_data_indicator = 0;
-    if (dci->ndi != mac->UL_ndi[dci->harq_pid]) {
-      pusch_config_pdu->pusch_data.new_data_indicator = 1;
+    NR_UL_HARQ_INFO_t *harq = &mac->ul_harq_info[dci->harq_pid];
+    pusch_config_pdu->pusch_data.new_data_indicator = false;
+    if (dci->ndi != harq->last_ndi) {
+      pusch_config_pdu->pusch_data.new_data_indicator = true;
       // if new data reset harq structure
-      memset(&mac->ul_harq_info[dci->harq_pid], 0, sizeof(mac->ul_harq_info[dci->harq_pid]));
+      memset(harq, 0, sizeof(*harq));
     }
-    mac->UL_ndi[dci->harq_pid] = dci->ndi;
+    harq->last_ndi = dci->ndi;
     /* RV */
     pusch_config_pdu->pusch_data.rv_index = dci->rv;
     /* HARQ_PROCESS_NUMBER */