Skip to content

O
OpenXG-RAN
Commit 8467f2eb authored by laurent's avatar laurent
Browse files
Options

missed to add a new file

parent d2efadee
Hide whitespace changes
Inline Side-by-side
Showing with 144 additions and 0 deletions
executables/nr-softmodem-common.h 0 → 100644
View file @ 8467f2eb
#ifndef NR_SOFTMODEM_COMMON_H
#define NR_SOFTMODEM_COMMON_H
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <execinfo.h>
#include <fcntl.h>
#include <getopt.h>
#include <linux/sched.h>
#include <sched.h>
#include <signal.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syscall.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/sysinfo.h>
#include "targets/ARCH/COMMON/common_lib.h"
#undef MALLOC
#include "assertions.h"
#include "PHY/types.h"
#include <threadPool/thread-pool.h>
#if defined(ENABLE_USE_MME)
#include "s1ap_eNB.h"
#ifdef PDCP_USE_NETLINK
#include "SIMULATION/ETH_TRANSPORT/proto.h"
#endif
#endif
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
#define CONFIG_HLP_UERXG "set UE RX gain\n"
#define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n"
#define CONFIG_HLP_UETXG "set UE TX gain\n"
#define CONFIG_HLP_UENANTR "set UE number of rx antennas\n"
#define CONFIG_HLP_UENANTT "set UE number of tx antennas\n"
#define CONFIG_HLP_UESCAN "set UE to scan around carrier\n"
#define CONFIG_HLP_UEFO "set UE to enable estimation and compensation of frequency offset\n"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n"
#define CONFIG_HLP_EXCCLK "tells hardware to use an external clock reference\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_TADV "Set timing_advance\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_EXMCAL "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n"
#define CONFIG_HLP_L2MONP "Enable L2 pcap messages on localhost \n"
#define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n"
#define CONFIG_HLP_TQFS "Apply three-quarter of sampling frequency, 23.04 Msps to reduce the data rate on USB/PCIe transfers (only valid for 20 MHz)\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_USRP_CLK_SRC "USRP clock source: 'internal' or 'external'\n"
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n"
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
#define CONFIG_HLP_TELN "Start embedded telnet server \n"
#define CONFIG_HLP_SNR "Set average SNR in dB (for --siml1 option)\n"
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters for LOG utility */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_LOGPARAMS_DESC { \
{"R" , CONFIG_HLP_FLOG, 0, uptr:&online_log_messages, defintval:1, TYPE_INT, 0}, \
{"g" , CONFIG_HLP_LOGL, 0, uptr:&glog_level, defintval:0, TYPE_UINT, 0}, \
{"G" , CONFIG_HLP_LOGV, 0, uptr:&glog_verbosity, defintval:0, TYPE_UINT16, 0}, \
{"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL, uptr:&start_telnetsrv, defintval:0, TYPE_UINT, 0}, \
}
#define CMDLINE_ONLINELOG_IDX 0
#define CMDLINE_GLOGLEVEL_IDX 1
#define CMDLINE_GLOGVERBO_IDX 2
#define CMDLINE_STARTTELN_IDX 3
/***************************************************************************************************************************************/
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int rx_input_level_dBm;
extern uint8_t exit_missed_slots;
extern uint64_t num_missed_slots; // counter for the number of missed slots
extern int oaisim_flag;
extern volatile int oai_exit;
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern double cpuf;
#if defined(ENABLE_ITTI)
extern volatile int start_eNB;
extern volatile int start_UE;
#endif
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment