Skip to content

O
OpenXG-RAN
Commit db4fa2e8 authored by Robert Schmidt's avatar Robert Schmidt
Browse files
Options

Update config

parent bebf2751
Hide whitespace changes
Inline Side-by-side
Showing with 47 additions and 60 deletions
targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band78.tm1.106PRB.nfapi.conf
View file @ db4fa2e8
......@@ -7,20 +7,29 @@ gNBs =
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 208; mnc = 95; mnc_length = 2; snssaiList = ({ sst = 1 }) });
tr_s_preference = "local_mac"
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_N1 = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
enable_sdap = 0;
#sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 0;
}
);
servingCellConfigCommon = (
{
......@@ -43,8 +52,8 @@ gNBs =
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=41,L=24 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6366;
# this is RBstart=27,L=48 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
......@@ -64,7 +73,7 @@ gNBs =
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6366;
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
......@@ -76,7 +85,7 @@ gNBs =
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
......@@ -89,7 +98,7 @@ gNBs =
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
......@@ -145,35 +154,13 @@ gNBs =
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = 10;
ssPBCH_BlockPower = -25;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
......@@ -193,13 +180,13 @@ gNBs =
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "eth0";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "eth0";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_NGU = 2152; # Spec 2152
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/13";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/26";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
......@@ -219,24 +206,24 @@ MACRLCs = (
}
)
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config =
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config = {
global_log_level = "info";
sdap_log_level = "info";
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment