[Docker] adding OAI LTE RU target build in a container image

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

ci-scripts/cls_containerize.py

@@ -150,6 +150,8 @@ class Containerize():
 					imageNames.append(('oai-nr-ue', 'nrUE'))
 					if self.host == 'Red Hat':
 						imageNames.append(('oai-physim', 'phySim'))
+					if self.host == 'Ubuntu':
+						imageNames.append(('oai-lte-ru', 'lteRU'))
 		if len(imageNames) == 0:
 			imageNames.append(('oai-enb', 'eNB'))
 		

docker/Dockerfile.lteRU.rhel8.2

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface BUILD service
+#   Valid for RHEL8
+#
+#---------------------------------------------------------------------
+
+FROM ran-build:latest AS ru-build
+
+RUN rm -Rf /oai-ran
+WORKDIR /oai-ran
+COPY . .
+
+#run build_oai to build the target image
+RUN /bin/sh oaienv && \
+    cd cmake_targets && \
+    mkdir -p log && \
+    ./build_oai --RU --ninja -w USRP --verbose-ci
+
+RUN yum install -y python3-pip && \
+    pip3 install --ignore-installed pyyaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
+
+#start from scratch for target executable
+FROM registry.access.redhat.com/ubi8/ubi:latest as oai-lte-ru
+ENV TZ=Europe/Paris
+
+RUN yum update -y && \
+    yum install -y --enablerepo="ubi-8-codeready-builder" \
+        tzdata \
+        atlas \
+        net-tools \
+        iputils \
+        iproute && \
+    echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
+    echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
+
+WORKDIR /opt/oai-lte-ru/bin
+COPY --from=ru-build /oai-ran/targets/bin/oairu.Rel15 .
+COPY --from=ru-build /oai-ran/docker/scripts/lte_ru_entrypoint.sh entrypoint.sh
+
+WORKDIR /usr/local/lib/
+COPY --from=ru-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/libparams_libconfig.so .
+COPY --from=ru-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
+
+# Copying from the ran-build image the USRP needed packages
+COPY --from=ru-build /lib64/libconfig.so.9 /lib64
+COPY --from=ru-build /lib64/libblas.so.3 /lib64
+COPY --from=ru-build /lib64/liblapack.so.3 /lib64
+COPY --from=ru-build /lib64/liblapacke.so.3 /lib64
+COPY --from=ru-build /lib64/libboost_chrono.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_date_time.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_filesystem.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_program_options.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_serialization.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_thread.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_system.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_atomic.so.1.66.0 /lib64
+COPY --from=ru-build /lib64/libboost_timer.so.1.66.0 /lib64
+COPY --from=ru-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
+
+RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so" && \
+    /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so" && \
+    /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so" && \
+    ldconfig
+
+# Copy the relevant configuration files for RRU
+WORKDIR /opt/oai-lte-ru/etc
+COPY --from=ru-build /oai-ran/docker/etc/rru* ./
+
+WORKDIR /opt/oai-lte-ru
+
+ENTRYPOINT ["/opt/oai-lte-ru/bin/entrypoint.sh"]
+CMD ["/opt/oai-lte-ru/bin/oairu.Rel15", "-O", "/opt/oai-lte-ru/etc/rru.conf"]

docker/Dockerfile.lteRU.ubuntu18

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface BUILD service
+#   Valid for Ubuntu 18.04
+#
+#---------------------------------------------------------------------
+
+FROM ran-build:latest AS ru-build
+
+RUN rm -Rf /oai-ran
+WORKDIR /oai-ran
+COPY . .
+
+#run build_oai to build the target image
+RUN /bin/sh oaienv && \
+    cd cmake_targets && \
+    mkdir -p log && \
+    ./build_oai --RU --ninja -w USRP --verbose-ci
+
+RUN apt-get install -y python3-pip && \
+    pip3 install --ignore-installed pyyaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
+
+#start from scratch for target executable
+FROM ubuntu:bionic as oai-lte-ru
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Europe/Paris
+
+RUN apt-get update && \
+    DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
+    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
+        tzdata \
+        software-properties-common \
+        libblas3 \
+        libatlas3-base \
+        libconfig9 \
+        net-tools \
+        iputils-ping \
+        iproute2 && \
+    # Install UHD driver from ettus ppa
+    # At time of writing, it is 3.14
+    add-apt-repository ppa:ettusresearch/uhd --yes && \
+    apt-get update && \
+    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
+        python \
+        libusb-1.0-0 \
+        libuhd003 \
+        uhd-host && \
+    rm -rf /var/lib/apt/lists/*
+
+WORKDIR /opt/oai-lte-ru/bin
+COPY --from=ru-build /oai-ran/targets/bin/oairu.Rel15 .
+COPY --from=ru-build /oai-ran/docker/scripts/lte_ru_entrypoint.sh entrypoint.sh
+
+WORKDIR /usr/local/lib/
+COPY --from=ru-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
+COPY --from=ru-build /oai-ran/targets/bin/libparams_libconfig.so .
+COPY --from=ru-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
+RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so" && \
+    /bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so" && \
+    /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so" && \
+    ldconfig
+
+# Copy the relevant configuration files for RRU
+WORKDIR /opt/oai-lte-ru/etc
+COPY --from=ru-build /oai-ran/docker/etc/rru* ./
+
+WORKDIR /opt/oai-lte-ru
+
+ENTRYPOINT ["/opt/oai-lte-ru/bin/entrypoint.sh"]
+CMD ["/opt/oai-lte-ru/bin/oairu.Rel15", "-O", "/opt/oai-lte-ru/etc/rru.conf"]

docker/scripts/lte_ru_entrypoint.sh

+#!/bin/bash
+
+set -euo pipefail
+
+PREFIX=/opt/oai-lte-ru
+
+# Based another env var, pick one template to use
+if [[ -v USE_FDD_RRU ]]; then ln -s $PREFIX/etc/rru.fdd.conf $PREFIX/etc/rru.conf; fi
+if [[ -v USE_TDD_RRU ]]; then ln -s $PREFIX/etc/rru.tdd.conf $PREFIX/etc/rru.conf; fi
+
+# Only this template will be manipulated
+CONFIG_FILES=`ls $PREFIX/etc/rru.conf || true`
+
+for c in ${CONFIG_FILES}; do
+    # grep variable names (format: ${VAR}) from template to be rendered
+    VARS=$(grep -oP '@[a-zA-Z0-9_]+@' ${c} | sort | uniq | xargs)
+
+    # create sed expressions for substituting each occurrence of ${VAR}
+    # with the value of the environment variable "VAR"
+    EXPRESSIONS=""
+    for v in ${VARS}; do
+        NEW_VAR=`echo $v | sed -e "s#@##g"`
+        if [[ "${!NEW_VAR}x" == "x" ]]; then
+            echo "Error: Environment variable '${NEW_VAR}' is not set." \
+                "Config file '$(basename $c)' requires all of $VARS."
+            exit 1
+        fi
+        EXPRESSIONS="${EXPRESSIONS};s|${v}|${!NEW_VAR}|g"
+    done
+    EXPRESSIONS="${EXPRESSIONS#';'}"
+
+    # render template and inline replace config file
+    sed -i "${EXPRESSIONS}" ${c}
+done
+
+# Load the USRP binaries
+if [[ -v USE_B2XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t b2xx
+elif [[ -v USE_X3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t x3xx
+elif [[ -v USE_N3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t n3xx
+fi
+
+echo "=================================="
+echo "== Starting eNB soft modem"
+if [[ -v USE_ADDITIONAL_OPTIONS ]]; then
+    echo "Additional option(s): ${USE_ADDITIONAL_OPTIONS}"
+    new_args=()
+    while [[ $# -gt 0 ]]; do
+        new_args+=("$1")
+        shift
+    done
+    for word in ${USE_ADDITIONAL_OPTIONS}; do
+        new_args+=("$word")
+    done
+    echo "${new_args[@]}"
+    exec "${new_args[@]}"
+else
+    echo "$@"
+    exec "$@"
+fi