libpgm-dev will add the dependency on libpgm 5.2.0 or 5.1.0 automatically
according to the ubuntu version

liblas3gf have been replaced by libblas3 on 16.04
liblas3* will be pulled by libblas-dev, so we don't need to add it to package list

This package is needed for the command add-apt-repository

Thank to Thomas Laurent for refactorize get_distribution_released

build_helper exits early on error. compilations() tells where the
compilation logs can be found after compiling it. So in case of error, it
was never displayed.
Add a log info before compiling

There are a lot of case where the build scripts fails. Despite this, the
build script happily continue to the end and tells "Successfully built
xxxx".
This fix ensure the build stops early with the first error message on the
bottom of the log.

T

I did some compilation tests using `./build_oai -s --run-group "0101*"`, all was fine.

I ran `lte-softmodem` with the sequans and let it run for a while with both
uplink and downlink UDP low throughput traffic, all was fine.

I ran some TCP tests, downlink 14 Mb/s (because the sequans does not report
a CQI of 15 but 14 maximum, so we don't go to maximum MCS, so 14 Mb/s instead
of 16) with a very clean radio (almost no error in the HARQ processes).

For uplink things are not so clean, it starts at 6 Mb/s and after a while goes
down to 2/3 Mbit/s. Lot's of errors in the HARQ processes, mostly uplink but
also downlink.

This is a both with and without T activated.

So to me it's fine.

The T tracer is a debugging tool. When it's not enabled,
it has zero impact on the processing. I think we need to
do very little tests before merging. I'll let you decide
but to me it's okay!

See merge request !36

if you compile *without* T it fails because the T macro is interpreted
as a function call

Conflicts:
	cmake_targets/CMakeLists.txt
	cmake_targets/build_oai
	openair1/PHY/LTE_TRANSPORT/pucch.c
	openair1/SCHED/phy_procedures_lte_eNb.c
	openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
	targets/RT/USER/lte-softmodem.c

very basic, to be refined, find a nice way to display (plot? text?)
protocol data movement

to be refined, it's rough

3 pixels wide look better than 1

- update T_messages.txt
- update call sites of the T for thoses traces

more readable, still not satisfying though

events are accepted by the logger if the filter accepts them
the filter is optional (no filter means to accept all events)

improve the use of the variable "frame" in oaisim

The modifications are only in oaisim.c.
It is thus needless to run soft-modem tests.
Only oaisim tests are required.

See merge request !34

this is like timeview but the plotting is done at frame/subframe
resolution of a given reference clock signal, let's say.

The realtime information of the events is not used. It's all
logical.

It will be used to log harq processes for the moment.