usrp_lib.cpp 50.8 KB
Newer Older
1 2 3 4 5
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
6
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

Raymond Knopp's avatar
 
Raymond Knopp committed
22 23
/** usrp_lib.cpp
 *
24
 * \author: HongliangXU : hong-liang-xu@agilent.com
Raymond Knopp's avatar
 
Raymond Knopp committed
25 26 27 28 29 30
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
31 32
#include <uhd/version.hpp>
#if UHD_VERSION < 3110000
Raymond Knopp's avatar
 
Raymond Knopp committed
33
#include <uhd/utils/thread_priority.hpp>
34 35 36
#else
#include <uhd/utils/thread.hpp>
#endif
Raymond Knopp's avatar
 
Raymond Knopp committed
37
#include <uhd/usrp/multi_usrp.hpp>
38
#include <uhd/version.hpp>
Raymond Knopp's avatar
 
Raymond Knopp committed
39 40
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
Florian Kaltenberger's avatar
Florian Kaltenberger committed
41 42
#include <boost/thread.hpp>
#include <boost/format.hpp>
Raymond Knopp's avatar
 
Raymond Knopp committed
43 44 45 46
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
47
#include <time.h>
48
#include "common/utils/LOG/log.h"
Raymond Knopp's avatar
 
Raymond Knopp committed
49
#include "common_lib.h"
laurent's avatar
laurent committed
50
#include "assertions.h"
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
51 52
#include <sys/sysinfo.h>
#include <sys/resource.h>
laurent's avatar
laurent committed
53

54 55 56
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
laurent's avatar
laurent committed
57

58 59 60
#ifdef __AVX2__
#  include <immintrin.h>
#endif
61

62 63 64 65
#ifdef __arm__
#  include <arm_neon.h>
#endif

66 67 68 69
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

laurent's avatar
laurent committed
70 71
/*! \brief USRP Configuration */
typedef struct {
Raymond Knopp's avatar
 
Raymond Knopp committed
72

73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107
  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
  //! USRP device pointer
  uhd::usrp::multi_usrp::sptr usrp;

  //create a send streamer and a receive streamer
  //! USRP TX Stream
  uhd::tx_streamer::sptr tx_stream;
  //! USRP RX Stream
  uhd::rx_streamer::sptr rx_stream;

  //! USRP TX Metadata
  uhd::tx_metadata_t tx_md;
  //! USRP RX Metadata
  uhd::rx_metadata_t rx_md;

  //! Sampling rate
  double sample_rate;

  //! TX forward samples. We use usrp_time_offset to get this value
  int tx_forward_nsamps; //166 for 20Mhz

  // --------------------------------
  // Debug and output control
  // --------------------------------
  int num_underflows;
  int num_overflows;
  int num_seq_errors;
  int64_t tx_count;
  int64_t rx_count;
  int wait_for_first_pps;
  int use_gps;
  //! timestamp of RX packet
  openair0_timestamp rx_timestamp;
Raymond Knopp's avatar
 
Raymond Knopp committed
108

laurent's avatar
laurent committed
109
} usrp_state_t;
Raymond Knopp's avatar
 
Raymond Knopp committed
110

Florian Kaltenberger's avatar
Florian Kaltenberger committed
111 112
//void print_notes(void)
//{
113 114 115 116 117 118
// Helpful notes
//  std::cout << boost::format("**************************************Helpful Notes on Clock/PPS Selection**************************************\n");
//  std::cout << boost::format("As you can see, the default 10 MHz Reference and 1 PPS signals are now from the GPSDO.\n");
//  std::cout << boost::format("If you would like to use the internal reference(TCXO) in other applications, you must configure that explicitly.\n");
//  std::cout << boost::format("You can no longer select the external SMAs for 10 MHz or 1 PPS signaling.\n");
//  std::cout << boost::format("****************************************************************************************************************\n");
Florian Kaltenberger's avatar
Florian Kaltenberger committed
119 120
//}

121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171
static int sync_to_gps(openair0_device *device) {
  uhd::set_thread_priority_safe();
  //std::string args;
  //Set up program options
  //po::options_description desc("Allowed options");
  //desc.add_options()
  //("help", "help message")
  //("args", po::value<std::string>(&args)->default_value(""), "USRP device arguments")
  //;
  //po::variables_map vm;
  //po::store(po::parse_command_line(argc, argv, desc), vm);
  //po::notify(vm);
  //Print the help message
  //if (vm.count("help"))
  //{
  //  std::cout << boost::format("Synchronize USRP to GPS %s") % desc << std::endl;
  // return EXIT_FAILURE;
  //}
  //Create a USRP device
  //std::cout << boost::format("\nCreating the USRP device with: %s...\n") % args;
  //uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
  //std::cout << boost::format("Using Device: %s\n") % usrp->get_pp_string();
  usrp_state_t *s = (usrp_state_t *)device->priv;

  try {
    size_t num_mboards = s->usrp->get_num_mboards();
    size_t num_gps_locked = 0;

    for (size_t mboard = 0; mboard < num_mboards; mboard++) {
      std::cout << "Synchronizing mboard " << mboard << ": " << s->usrp->get_mboard_name(mboard) << std::endl;
      //Set references to GPSDO
      s->usrp->set_clock_source("gpsdo", mboard);
      s->usrp->set_time_source("gpsdo", mboard);
      //std::cout << std::endl;
      //print_notes();
      //std::cout << std::endl;
      //Check for 10 MHz lock
      std::vector<std::string> sensor_names = s->usrp->get_mboard_sensor_names(mboard);

      if(std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end()) {
        std::cout << "Waiting for reference lock..." << std::flush;
        bool ref_locked = false;

        for (int i = 0; i < 30 and not ref_locked; i++) {
          ref_locked = s->usrp->get_mboard_sensor("ref_locked", mboard).to_bool();

          if (not ref_locked) {
            std::cout << "." << std::flush;
            boost::this_thread::sleep(boost::posix_time::seconds(1));
          }
        }
Raymond Knopp's avatar
 
Raymond Knopp committed
172

173 174 175 176 177 178
        if(ref_locked) {
          std::cout << "LOCKED" << std::endl;
        } else {
          std::cout << "FAILED" << std::endl;
          std::cout << "Failed to lock to GPSDO 10 MHz Reference. Exiting." << std::endl;
          exit(EXIT_FAILURE);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
179
        }
180 181 182
      } else {
        std::cout << boost::format("ref_locked sensor not present on this board.\n");
      }
Florian Kaltenberger's avatar
Florian Kaltenberger committed
183

184 185
      //Wait for GPS lock
      bool gps_locked = s->usrp->get_mboard_sensor("gps_locked", mboard).to_bool();
Florian Kaltenberger's avatar
Florian Kaltenberger committed
186

187 188 189 190
      if(gps_locked) {
        num_gps_locked++;
        std::cout << boost::format("GPS Locked\n");
      } else {
191
        LOG_W(HW,"WARNING:  GPS not locked - time will not be accurate until locked\n");
192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211
      }

      //Set to GPS time
      uhd::time_spec_t gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
      //s->usrp->set_time_next_pps(gps_time+1.0, mboard);
      s->usrp->set_time_next_pps(uhd::time_spec_t(0.0));
      //Wait for it to apply
      //The wait is 2 seconds because N-Series has a known issue where
      //the time at the last PPS does not properly update at the PPS edge
      //when the time is actually set.
      boost::this_thread::sleep(boost::posix_time::seconds(2));
      //Check times
      gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
      uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps(mboard);
      std::cout << "USRP time: " << (boost::format("%0.9f") % time_last_pps.get_real_secs()) << std::endl;
      std::cout << "GPSDO time: " << (boost::format("%0.9f") % gps_time.get_real_secs()) << std::endl;
      //if (gps_time.get_real_secs() == time_last_pps.get_real_secs())
      //    std::cout << std::endl << "SUCCESS: USRP time synchronized to GPS time" << std::endl << std::endl;
      //else
      //    std::cerr << std::endl << "ERROR: Failed to synchronize USRP time to GPS time" << std::endl << std::endl;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
212
    }
213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245

    if (num_gps_locked == num_mboards and num_mboards > 1) {
      //Check to see if all USRP times are aligned
      //First, wait for PPS.
      uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps();

      while (time_last_pps == s->usrp->get_time_last_pps()) {
        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
      }

      //Sleep a little to make sure all devices have seen a PPS edge
      boost::this_thread::sleep(boost::posix_time::milliseconds(200));
      //Compare times across all mboards
      bool all_matched = true;
      uhd::time_spec_t mboard0_time = s->usrp->get_time_last_pps(0);

      for (size_t mboard = 1; mboard < num_mboards; mboard++) {
        uhd::time_spec_t mboard_time = s->usrp->get_time_last_pps(mboard);

        if (mboard_time != mboard0_time) {
          all_matched = false;
          std::cerr << (boost::format("ERROR: Times are not aligned: USRP 0=%0.9f, USRP %d=%0.9f")
                        % mboard0_time.get_real_secs()
                        % mboard
                        % mboard_time.get_real_secs()) << std::endl;
        }
      }

      if (all_matched) {
        std::cout << "SUCCESS: USRP times aligned" << std::endl << std::endl;
      } else {
        std::cout << "ERROR: USRP times are not aligned" << std::endl << std::endl;
      }
Florian Kaltenberger's avatar
Florian Kaltenberger committed
246
    }
247 248 249 250 251 252 253 254 255
  } catch (std::exception &e) {
    std::cout << boost::format("\nError: %s") % e.what();
    std::cout << boost::format("This could mean that you have not installed the GPSDO correctly.\n\n");
    std::cout << boost::format("Visit one of these pages if the problem persists:\n");
    std::cout << boost::format(" * N2X0/E1X0: http://files.ettus.com/manual/page_gpsdo.html");
    std::cout << boost::format(" * X3X0: http://files.ettus.com/manual/page_gpsdo_x3x0.html\n\n");
    std::cout << boost::format(" * E3X0: http://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_hw_gps\n\n");
    exit(EXIT_FAILURE);
  }
Raymond Knopp's avatar
 
Raymond Knopp committed
256

257
  return EXIT_SUCCESS;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
258
}
Raymond Knopp's avatar
 
Raymond Knopp committed
259

260 261 262 263
#if defined(USRP_REC_PLAY)
#include "usrp_lib.h"
static FILE    *pFile = NULL;
int             mmapfd = 0;
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
264 265
int             iqfd = 0;
int             use_mmap = 1; // default is to use mmap
266 267 268 269 270 271 272 273 274
struct stat     sb;
iqrec_t        *ms_sample = NULL;                      // memory for all subframes
unsigned int    nb_samples = 0;
unsigned int    cur_samples = 0;
int64_t         wrap_count = 0;
int64_t         wrap_ts = 0;
unsigned int    u_sf_mode = 0;                         // 1=record, 2=replay
unsigned int    u_sf_record = 0;                       // record mode
unsigned int    u_sf_replay = 0;                       // replay mode
bruno mongazon's avatar
bruno mongazon committed
275
char            u_sf_filename[1024] = "";              // subframes file path
276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298
unsigned int    u_sf_max = DEF_NB_SF;                  // max number of recorded subframes
unsigned int    u_sf_loops = DEF_SF_NB_LOOP;           // number of loops in replay mode
unsigned int    u_sf_read_delay = DEF_SF_DELAY_READ;   // read delay in replay mode
unsigned int    u_sf_write_delay = DEF_SF_DELAY_WRITE; // write delay in replay mode

char config_opt_sf_file[] = CONFIG_OPT_SF_FILE;
char config_def_sf_file[] = DEF_SF_FILE;
char config_hlp_sf_file[] = CONFIG_HLP_SF_FILE;
char config_opt_sf_rec[] = CONFIG_OPT_SF_REC;
char config_hlp_sf_rec[] = CONFIG_HLP_SF_REC;
char config_opt_sf_rep[] = CONFIG_OPT_SF_REP;
char config_hlp_sf_rep[] = CONFIG_HLP_SF_REP;
char config_opt_sf_max[] = CONFIG_OPT_SF_MAX;
char config_hlp_sf_max[] = CONFIG_HLP_SF_MAX;
char config_opt_sf_loops[] = CONFIG_OPT_SF_LOOPS;
char config_hlp_sf_loops[] = CONFIG_HLP_SF_LOOPS;
char config_opt_sf_rdelay[] = CONFIG_OPT_SF_RDELAY;
char config_hlp_sf_rdelay[] = CONFIG_HLP_SF_RDELAY;
char config_opt_sf_wdelay[] = CONFIG_OPT_SF_WDELAY;
char config_hlp_sf_wdelay[] = CONFIG_HLP_SF_WDELAY;

#endif

299 300 301
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
laurent's avatar
laurent committed
302
static int trx_usrp_start(openair0_device *device) {
303
#if defined(USRP_REC_PLAY)
304

305 306 307 308 309
  if (u_sf_mode != 2) { // not replay mode
#endif
    usrp_state_t *s = (usrp_state_t *)device->priv;
    // setup GPIO for TDD, GPIO(4) = ATR_RX
    //set data direction register (DDR) to output
310
    s->usrp->set_gpio_attr("FP0", "DDR", 0x1f, 0x1f);
311
    //set control register to ATR
312
    s->usrp->set_gpio_attr("FP0", "CTRL", 0x1f,0x1f);
313
    //set ATR register
314
    s->usrp->set_gpio_attr("FP0", "ATR_RX", 1<<4, 0x1f);
laurent's avatar
laurent committed
315 316
    // init recv and send streaming
    uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
317 318
    LOG_I(PHY,"Time in secs now: %llu \n", s->usrp->get_time_now().to_ticks(s->sample_rate));
    LOG_I(PHY,"Time in secs last pps: %llu \n", s->usrp->get_time_last_pps().to_ticks(s->sample_rate));
319 320 321

    if (s->use_gps == 1) {
      s->wait_for_first_pps = 1;
322 323 324
      cmd.time_spec = s->usrp->get_time_last_pps() + uhd::time_spec_t(1.0);
    } else {
      s->wait_for_first_pps = 0;
325 326 327
      cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
    }

laurent's avatar
laurent committed
328
    cmd.stream_now = false; // start at constant delay
laurent's avatar
laurent committed
329 330 331 332 333 334 335 336
    s->rx_stream->issue_stream_cmd(cmd);
    s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
    s->tx_md.has_time_spec = true;
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = false;
    s->rx_count = 0;
    s->tx_count = 0;
    s->rx_timestamp = 0;
337
#if defined(USRP_REC_PLAY)
338 339 340 341
  }

#endif
  return 0;
Raymond Knopp's avatar
 
Raymond Knopp committed
342
}
laurent's avatar
laurent committed
343
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources
344 345
 * \param device the hardware to use
 */
laurent's avatar
laurent committed
346
static void trx_usrp_end(openair0_device *device) {
347 348
#if defined(USRP_REC_PLAY) // For some ugly reason, this can be called several times...
  static int done = 0;
349

350
  if (done == 1) return;
351

352
  done = 1;
Raymond Knopp's avatar
 
Raymond Knopp committed
353

354

355 356 357
  if (u_sf_mode != 2) { // not subframes replay
#endif
    usrp_state_t *s = (usrp_state_t *)device->priv;
laurent's avatar
laurent committed
358 359 360 361 362
    s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);
    //send a mini EOB packet
    s->tx_md.end_of_burst = true;
    s->tx_stream->send("", 0, s->tx_md);
    s->tx_md.end_of_burst = false;
363
    sleep(1);
364
#if defined(USRP_REC_PLAY)
365 366
  }

367 368
#endif
#if defined(USRP_REC_PLAY)
369 370 371 372 373 374 375 376 377 378 379 380

  if (u_sf_mode == 1) { // subframes store
    pFile = fopen (u_sf_filename,"wb+");

    if (pFile == NULL) {
      std::cerr << "Cannot open " << u_sf_filename << std::endl;
    } else {
      unsigned int i = 0;
      unsigned int modu = 0;

      if ((modu = nb_samples % 10) != 0) {
        nb_samples -= modu; // store entire number of frames
381
      }
382 383 384 385 386

      std::cerr << "Writing " << nb_samples << " subframes to " << u_sf_filename << " ..." << std::endl;

      for (i = 0; i < nb_samples; i++) {
        fwrite(ms_sample+i, sizeof(unsigned char), sizeof(iqrec_t), pFile);
387
      }
388 389 390

      fclose (pFile);
      std::cerr << "File " << u_sf_filename << " closed." << std::endl;
391
    }
392 393 394 395 396 397 398 399 400 401 402
  }

  if (u_sf_mode == 1) { // record
    if (ms_sample != NULL) {
      free((void *)ms_sample);
      ms_sample = NULL;
    }
  }

  if (u_sf_mode == 2) { // replay
    if (use_mmap) {
403
      if (ms_sample != MAP_FAILED) {
404 405
        munmap(ms_sample, sb.st_size);
        ms_sample = NULL;
406
      }
407

408
      if (mmapfd != 0) {
409 410 411 412
        close(mmapfd);
        mmapfd = 0;
      }
    } else {
413
      if (ms_sample != NULL) {
414 415
        free(ms_sample);
        ms_sample = NULL;
416
      }
417 418 419 420

      if (iqfd != 0) {
        close(iqfd);
        iqfd = 0;
421 422
      }
    }
423 424 425
  }

#endif
Raymond Knopp's avatar
 
Raymond Knopp committed
426
}
427

428 429
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
430
      @param timestamp The timestamp at which the first sample MUST be sent
431 432
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
433
      @param antenna_id index of the antenna if the device has multiple antennas
434
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
laurent's avatar
laurent committed
435 436
*/
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) {
437
  int ret=0;
438
#if defined(USRP_REC_PLAY)
439

440
  if (u_sf_mode != 2) { // not replay mode
441 442 443
#endif
    usrp_state_t *s = (usrp_state_t *)device->priv;
    int nsamps2;  // aligned to upper 32 or 16 byte boundary
444

445
#if defined(__x86_64) || defined(__i386__)
446 447 448 449
  #ifdef __AVX2__
      nsamps2 = (nsamps+7)>>3;
      __m256i buff_tx[2][nsamps2];
  #else
450 451
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tx[2][nsamps2];
452
  #endif
453
#elif defined(__arm__)
454 455
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tx[2][nsamps2];
456 457
#else
    #error Unsupported CPU architecture, USRP device cannot be built   
458
#endif
459 460 461 462

    // bring RX data into 12 LSBs for softmodem RX
    for (int i=0; i<cc; i++) {
      for (int j=0; j<nsamps2; j++) {
463 464
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
465
        buff_tx[i][j] = _mm256_slli_epi16(((__m256i *)buff[i])[j],4);
466
#else
467
        buff_tx[i][j] = _mm_slli_epi16(((__m128i *)buff[i])[j],4);
468 469
#endif
#elif defined(__arm__)
470
        buff_tx[i][j] = vshlq_n_s16(((int16x8_t *)buff[i])[j],4);
471
#endif
472
      }
laurent's avatar
laurent committed
473 474
    }

475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515
    s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
    s->tx_md.has_time_spec = flags;

    if(flags>0)
      s->tx_md.has_time_spec = true;
    else
      s->tx_md.has_time_spec = false;

    if (flags == 2) { // start of burst
      s->tx_md.start_of_burst = true;
      s->tx_md.end_of_burst = false;
    } else if (flags == 3) { // end of burst
      s->tx_md.start_of_burst = false;
      s->tx_md.end_of_burst = true;
    } else if (flags == 4) { // start and end
      s->tx_md.start_of_burst = true;
      s->tx_md.end_of_burst = true;
    } else if (flags==1) { // middle of burst
      s->tx_md.start_of_burst = false;
      s->tx_md.end_of_burst = false;
    }

    if(flags==10) { // fail safe mode
      s->tx_md.has_time_spec = false;
      s->tx_md.start_of_burst = false;
      s->tx_md.end_of_burst = true;
    }

    if (cc>1) {
      std::vector<void *> buff_ptrs;

      for (int i=0; i<cc; i++)
        buff_ptrs.push_back(buff_tx[i]);

      ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
    } else
      ret = (int)s->tx_stream->send(buff_tx[0], nsamps, s->tx_md,1e-3);

    if (ret != nsamps)
      LOG_E(PHY,"[xmit] tx samples %d != %d\n",ret,nsamps);

516 517 518 519 520 521 522 523
#if defined(USRP_REC_PLAY)
  } else {
    struct timespec req;
    req.tv_sec = 0;
    req.tv_nsec = u_sf_write_delay * 1000;
    nanosleep(&req, NULL);
    ret = nsamps;
  }
524

525
#endif
526
  return ret;
Raymond Knopp's avatar
 
Raymond Knopp committed
527 528
}

529 530 531 532 533 534 535 536 537 538 539
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
laurent's avatar
laurent committed
540
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
541
  usrp_state_t *s = (usrp_state_t *)device->priv;
542 543 544
  int samples_received=0,i,j;
  int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(USRP_REC_PLAY)
545

546
  if (u_sf_mode != 2) { // not replay mode
547
#endif
548 549
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
laurent's avatar
laurent committed
550 551
    nsamps2 = (nsamps+7)>>3;
    __m256i buff_tmp[2][nsamps2];
552
#else
laurent's avatar
laurent committed
553 554
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tmp[2][nsamps2];
555 556
#endif
#elif defined(__arm__)
laurent's avatar
laurent committed
557 558
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tmp[2][nsamps2];
559 560
#endif

laurent's avatar
laurent committed
561
    if (device->type == USRP_B200_DEV) {
562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582
      if (cc>1) {
        // receive multiple channels (e.g. RF A and RF B)
        std::vector<void *> buff_ptrs;

        for (int i=0; i<cc; i++) buff_ptrs.push_back(buff_tmp[i]);

        samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
      } else {
        // receive a single channel (e.g. from connector RF A)
        samples_received=0;

        while (samples_received != nsamps) {
          samples_received += s->rx_stream->recv(buff_tmp[0]+samples_received,
                                                 nsamps-samples_received, s->rx_md);

          if  ((s->wait_for_first_pps == 0) && (s->rx_md.error_code!=uhd::rx_metadata_t::ERROR_CODE_NONE))
            break;

          if ((s->wait_for_first_pps == 1) && (samples_received != nsamps)) {
            printf("sleep...\n"); //usleep(100);
          }
laurent's avatar
laurent committed
583
        }
584 585 586 587 588 589 590

        if (samples_received == nsamps) s->wait_for_first_pps=0;
      }

      // bring RX data into 12 LSBs for softmodem RX
      for (int i=0; i<cc; i++) {
        for (int j=0; j<nsamps2; j++) {
591 592
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
593
          ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
594
#else
595
          ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
596 597
#endif
#elif defined(__arm__)
598
          ((int16x8_t *)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
599
#endif
laurent's avatar
laurent committed
600
        }
601
      }
laurent's avatar
laurent committed
602
    } else if (device->type == USRP_X300_DEV) {
603 604 605
      if (cc>1) {
        // receive multiple channels (e.g. RF A and RF B)
        std::vector<void *> buff_ptrs;
laurent's avatar
laurent committed
606

607 608 609 610 611 612 613
        for (int i=0; i<cc; i++) buff_ptrs.push_back(buff[i]);

        samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
      } else {
        // receive a single channel (e.g. from connector RF A)
        samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
      }
614
    }
615

laurent's avatar
laurent committed
616
    if (samples_received < nsamps)
617
      LOG_E(PHY,"[recv] received %d samples out of %d\n",samples_received,nsamps);
618

laurent's avatar
laurent committed
619
    if ( s->rx_md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE)
620
      LOG_E(PHY, "%s\n", s->rx_md.to_pp_string(true).c_str());
621

laurent's avatar
laurent committed
622 623 624
    s->rx_count += nsamps;
    s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
    *ptimestamp = s->rx_timestamp;
625 626
#if defined (USRP_REC_PLAY)
  }
627 628

#endif
629
#if defined(USRP_REC_PLAY)
630

631 632 633
  if (u_sf_mode == 1) { // record mode
    // Copy subframes to memory (later dump on a file)
    if (nb_samples < u_sf_max) {
634
      (ms_sample+nb_samples)->header = BELL_LABS_IQ_HEADER;
635 636 637 638 639 640 641 642
      (ms_sample+nb_samples)->ts = *ptimestamp;
      memcpy((ms_sample+nb_samples)->samples, buff[0], nsamps*4);
      nb_samples++;
    }
  } else if (u_sf_mode == 2) { // replay mode
    if (cur_samples == nb_samples) {
      cur_samples = 0;
      wrap_count++;
643

644
      if (wrap_count == u_sf_loops) {
645 646
        std::cerr << "USRP device terminating subframes replay mode after " << u_sf_loops << " loops." << std::endl;
        return 0; // should make calling process exit
647
      }
648

649
      wrap_ts = wrap_count * (nb_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000));
650

bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
651
      if (!use_mmap) {
652 653 654 655 656
        if (lseek(iqfd, 0, SEEK_SET) == 0) {
          std::cerr << "Seeking at the beginning of IQ file" << std::endl;
        } else {
          std::cerr << "Problem seeking at the beginning of IQ file" << std::endl;
        }
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
657
      }
658
    }
659

bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
660 661
    if (use_mmap) {
      if (cur_samples < nb_samples) {
662 663 664 665 666 667 668 669 670
        *ptimestamp = (ms_sample[0].ts + (cur_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000))) + wrap_ts;

        if (cur_samples == 0) {
          std::cerr << "starting subframes file with wrap_count=" << wrap_count << " wrap_ts=" << wrap_ts
                    << " ts=" << *ptimestamp << std::endl;
        }

        memcpy(buff[0], &ms_sample[cur_samples].samples[0], nsamps*4);
        cur_samples++;
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
671 672 673 674
      }
    } else {
      // read sample from file
      if (read(iqfd, ms_sample, sizeof(iqrec_t)) != sizeof(iqrec_t)) {
675 676 677 678 679 680
        std::cerr << "pb reading iqfile at index " << sizeof(iqrec_t)*cur_samples << std::endl;
        close(iqfd);
        free(ms_sample);
        ms_sample = NULL;
        iqfd = 0;
        exit(-1);
bruno mongazon-cazavet's avatar
bruno mongazon-cazavet committed
681 682 683
      }

      if (cur_samples < nb_samples) {
684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700
        static int64_t ts0 = 0;

        if ((cur_samples == 0) && (wrap_count == 0)) {
          ts0 = ms_sample->ts;
        }

        *ptimestamp = ts0 + (cur_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000)) + wrap_ts;

        if (cur_samples == 0) {
          std::cerr << "starting subframes file with wrap_count=" << wrap_count << " wrap_ts=" << wrap_ts
                    << " ts=" << *ptimestamp << std::endl;
        }

        memcpy(buff[0], &ms_sample->samples[0], nsamps*4);
        cur_samples++;
        // Prepare for next read
        off_t where = lseek(iqfd, cur_samples * sizeof(iqrec_t), SEEK_SET);
701 702
      }
    }
703

704
    struct timespec req;
705

706
    req.tv_sec = 0;
707

708
    req.tv_nsec = u_sf_read_delay * 1000;
709

710
    nanosleep(&req, NULL);
711

712 713
    return nsamps;
  }
714

715 716
#endif
  return samples_received;
Raymond Knopp's avatar
 
Raymond Knopp committed
717 718
}

719 720 721 722
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
laurent's avatar
laurent committed
723
static bool is_equal(double a, double b) {
724
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
Raymond Knopp's avatar
 
Raymond Knopp committed
725
}
Raymond Knopp's avatar
 
Raymond Knopp committed
726

727
void *freq_thread(void *arg) {
728 729 730 731
  openair0_device *device=(openair0_device *)arg;
  usrp_state_t *s = (usrp_state_t *)device->priv;
  s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
732
  return NULL;
733 734
}
/*! \brief Set frequencies (TX/RX). Spawns a thread to handle the frequency change to not block the calling thread
735 736 737
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
laurent's avatar
laurent committed
738
 * \returns 0 in success
739
 */
740 741 742 743 744 745 746 747 748 749 750 751
int trx_usrp_set_freq(openair0_device *device, openair0_config_t *openair0_cfg, int dont_block) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  pthread_t f_thread;
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);

  // spawn a thread to handle the frequency change to not block the calling thread
  if (dont_block == 1)
    pthread_create(&f_thread,NULL,freq_thread,(void *)device);
  else {
    s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
    s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
  }
Raymond Knopp's avatar
 
Raymond Knopp committed
752

753
  return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
754 755
}

laurent's avatar
laurent committed
756
/*! \brief Set RX frequencies
757 758
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
759
 * \returns 0 in success
760
 */
761 762 763 764 765 766 767 768 769 770
int openair0_set_rx_frequencies(openair0_device *device, openair0_config_t *openair0_cfg) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  static int first_call=1;
  static double rf_freq,diff;
  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);
  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);
  return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
771 772
}

773 774 775
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
776
 * \returns 0 in success
777
 */
778
int trx_usrp_set_gains(openair0_device *device,
laurent's avatar
laurent committed
779
                       openair0_config_t *openair0_cfg) {
780 781 782 783 784 785 786 787 788 789 790
  usrp_state_t *s = (usrp_state_t *)device->priv;
  ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(0);
  s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[0]);
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);

  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    LOG_E(PHY,"RX Gain 0 too high, reduce by %f dB\n",
          openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());
    exit(-1);
  }
laurent's avatar
laurent committed
791

792 793 794 795 796
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
  LOG_I(PHY,"Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n",
        openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],
        openair0_cfg[0].rx_gain[0],gain_range.stop());
  return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
797
}
798

799 800 801
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
802 803
int trx_usrp_stop(openair0_device *device) {
  return(0);
804
}
805

806
/*! \brief USRPB210 RX calibration table */
807
rx_gain_calib_table_t calib_table_b210[] = {
808 809 810 811 812 813
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
  {-1,0}
laurent's avatar
laurent committed
814
};
815

816
/*! \brief USRPB210 RX calibration table */
817
rx_gain_calib_table_t calib_table_b210_38[] = {
818 819 820 821 822 823
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
  {-1,0}
laurent's avatar
laurent committed
824
};
825

826
/*! \brief USRPx310 RX calibration table */
827
rx_gain_calib_table_t calib_table_x310[] = {
828 829 830 831 832 833
  {3500000000.0,77.0},
  {2660000000.0,81.0},
  {2300000000.0,81.0},
  {1880000000.0,82.0},
  {816000000.0,85.0},
  {-1,0}
laurent's avatar
laurent committed
834 835 836
};

/*! \brief Set RX gain offset
837 838
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
laurent's avatar
laurent committed
839
 * \returns 0 in success
840
 */
841
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
842 843 844
  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
  double min_diff = 6e9,diff,gain_adj=0.0;
845

846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
      case 30720000:
        break;

      case 23040000:
        gain_adj=1.25;
        break;

      case 15360000:
        gain_adj=3.0;
        break;

      case 7680000:
        gain_adj=6.0;
        break;

      case 3840000:
        gain_adj=9.0;
        break;

      case 1920000:
        gain_adj=12.0;
        break;

      default:
        LOG_E(PHY,"unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
        exit(-1);
        break;
875
    }
876 877 878 879 880 881 882 883 884 885 886 887
  }

  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
    LOG_I(PHY,"cal %d: freq %f, offset %f, diff %f\n",
          i,
          openair0_cfg->rx_gain_calib_table[i].freq,
          openair0_cfg->rx_gain_calib_table[i].offset,diff);

    if (min_diff > diff) {
      min_diff = diff;
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
laurent's avatar
laurent committed
888
    }
889 890 891

    i++;
  }
892 893
}

laurent's avatar
laurent committed
894
/*! \brief print the USRP statistics
895 896 897
* \param device the hardware to use
* \returns  0 on success
*/
898 899
int trx_usrp_get_stats(openair0_device *device) {
  return(0);
900
}
901

laurent's avatar
laurent committed
902 903 904 905
/*! \brief Reset the USRP statistics
 * \param device the hardware to use
 * \returns  0 on success
 */
906 907
int trx_usrp_reset_stats(openair0_device *device) {
  return(0);
908
}
909

910 911
#if defined(USRP_REC_PLAY)
extern "C" {
912 913 914 915 916
  /*! \brief Initializer for USRP record/playback config
   * \param parameter array description
   * \returns  0 on success
   */
  int trx_usrp_recplay_config_init(paramdef_t *usrp_recplay_params) {
917 918 919 920
    // --subframes-file
    memcpy(usrp_recplay_params[0].optname, config_opt_sf_file, strlen(config_opt_sf_file));
    usrp_recplay_params[0].helpstr = config_hlp_sf_file;
    usrp_recplay_params[0].paramflags=PARAMFLAG_NOFREE;
bruno mongazon's avatar
bruno mongazon committed
921
    usrp_recplay_params[0].strptr=(char **)&u_sf_filename;
922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973
    usrp_recplay_params[0].defstrval = NULL;
    usrp_recplay_params[0].type=TYPE_STRING;
    usrp_recplay_params[0].numelt=sizeof(u_sf_filename);
    // --subframes-record
    memcpy(usrp_recplay_params[1].optname, config_opt_sf_rec, strlen(config_opt_sf_rec));
    usrp_recplay_params[1].helpstr = config_hlp_sf_rec;
    usrp_recplay_params[1].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[1].uptr=&u_sf_record;
    usrp_recplay_params[1].defuintval=0;
    usrp_recplay_params[1].type=TYPE_UINT;
    usrp_recplay_params[1].numelt=0;
    // --subframes-replay
    memcpy(usrp_recplay_params[2].optname, config_opt_sf_rep, strlen(config_opt_sf_rep));
    usrp_recplay_params[2].helpstr = config_hlp_sf_rep;
    usrp_recplay_params[2].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[2].uptr=&u_sf_replay;
    usrp_recplay_params[2].defuintval=0;
    usrp_recplay_params[2].type=TYPE_UINT;
    usrp_recplay_params[2].numelt=0;
    // --subframes-max
    memcpy(usrp_recplay_params[3].optname, config_opt_sf_max, strlen(config_opt_sf_max));
    usrp_recplay_params[3].helpstr = config_hlp_sf_max;
    usrp_recplay_params[3].paramflags=0;
    usrp_recplay_params[3].uptr=&u_sf_max;
    usrp_recplay_params[3].defuintval=DEF_NB_SF;
    usrp_recplay_params[3].type=TYPE_UINT;
    usrp_recplay_params[3].numelt=0;
    // --subframes-loops
    memcpy(usrp_recplay_params[4].optname, config_opt_sf_loops, strlen(config_opt_sf_loops));
    usrp_recplay_params[4].helpstr = config_hlp_sf_loops;
    usrp_recplay_params[4].paramflags=0;
    usrp_recplay_params[4].uptr=&u_sf_loops;
    usrp_recplay_params[4].defuintval=DEF_SF_NB_LOOP;
    usrp_recplay_params[4].type=TYPE_UINT;
    usrp_recplay_params[4].numelt=0;
    // --subframes-read-delay
    memcpy(usrp_recplay_params[5].optname, config_opt_sf_rdelay, strlen(config_opt_sf_rdelay));
    usrp_recplay_params[5].helpstr = config_hlp_sf_rdelay;
    usrp_recplay_params[5].paramflags=0;
    usrp_recplay_params[5].uptr=&u_sf_read_delay;
    usrp_recplay_params[5].defuintval=DEF_SF_DELAY_READ;
    usrp_recplay_params[5].type=TYPE_UINT;
    usrp_recplay_params[5].numelt=0;
    // --subframes-write-delay
    memcpy(usrp_recplay_params[6].optname, config_opt_sf_wdelay, strlen(config_opt_sf_wdelay));
    usrp_recplay_params[6].helpstr = config_hlp_sf_wdelay;
    usrp_recplay_params[6].paramflags=0;
    usrp_recplay_params[6].uptr=&u_sf_write_delay;
    usrp_recplay_params[6].defuintval=DEF_SF_DELAY_WRITE;
    usrp_recplay_params[6].type=TYPE_UINT;
    usrp_recplay_params[6].numelt=0;
    return 0; // always ok
974
  }
975 976 977
}
#endif

978
extern "C" {
979 980 981 982
  /*! \brief Initialize Openair USRP target. It returns 0 if OK
   * \param device the hardware to use
   * \param openair0_cfg RF frontend parameters set by application
   */
983
  int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
984 985
    LOG_D(PHY, "openair0_cfg[0].sdr_addrs == '%s'\n", openair0_cfg[0].sdr_addrs);
    LOG_D(PHY, "openair0_cfg[0].clock_source == '%d'\n", openair0_cfg[0].clock_source);
986
#if defined(USRP_REC_PLAY)
987 988 989 990
    paramdef_t usrp_recplay_params[7];
    struct sysinfo systeminfo;
    // to check
    static int done = 0;
991

992 993 994
    if (done == 1) {
      return 0;
    } // prevent from multiple init
995

996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049
    done = 1;
    // end to check
    // Use mmap for IQ files for systems with less than 6GB total RAM
    sysinfo(&systeminfo);

    if (systeminfo.totalram < 6144000000) {
      use_mmap = 0;
    }

    memset(usrp_recplay_params, 0, 7*sizeof(paramdef_t));
    memset(&u_sf_filename[0], 0, 1024);

    if (trx_usrp_recplay_config_init(usrp_recplay_params) != 0) {
      std::cerr << "USRP device record/replay mode configuration error exiting" << std::endl;
      return -1;
    }

    config_process_cmdline(usrp_recplay_params,sizeof(usrp_recplay_params)/sizeof(paramdef_t),NULL);

    if (strlen(u_sf_filename) == 0) {
      (void) strcpy(u_sf_filename, DEF_SF_FILE);
    }

    if (u_sf_replay == 1) u_sf_mode = 2;

    if (u_sf_record == 1) u_sf_mode = 1;

    if (u_sf_mode == 2) {
      // Replay subframes from from file
      int bw_gain_adjust=0;
      device->openair0_cfg = openair0_cfg;
      device->type = USRP_B200_DEV;
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
      openair0_cfg[0].tx_sample_advance     = 80;
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
      openair0_cfg[0].iq_txshift = 4;//shift
      openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
      set_rx_gain_offset(&openair0_cfg[0],0,bw_gain_adjust);
      device->priv = NULL;
      device->trx_start_func = trx_usrp_start;
      device->trx_write_func = trx_usrp_write;
      device->trx_read_func  = trx_usrp_read;
      device->trx_get_stats_func = trx_usrp_get_stats;
      device->trx_reset_stats_func = trx_usrp_reset_stats;
      device->trx_end_func   = trx_usrp_end;
      device->trx_stop_func  = trx_usrp_stop;
      device->trx_set_freq_func = trx_usrp_set_freq;
      device->trx_set_gains_func   = trx_usrp_set_gains;
      device->openair0_cfg = openair0_cfg;
      std::cerr << "USRP device initialized in subframes replay mode for " << u_sf_loops << " loops. Use mmap="
                << use_mmap << std::endl;
    } else {
1050
#endif
1051 1052
      uhd::set_thread_priority_safe(1.0);
      usrp_state_t *s = (usrp_state_t *)calloc(sizeof(usrp_state_t),1);
1053

1054 1055
      if (openair0_cfg[0].clock_source==gpsdo)
        s->use_gps =1;
laurent's avatar
laurent committed
1056

1057 1058 1059 1060 1061
      // Initialize USRP device
      device->openair0_cfg = openair0_cfg;
      int vers=0,subvers=0,subsubvers=0;
      int bw_gain_adjust=0;
#if defined(USRP_REC_PLAY)
laurent's avatar
laurent committed
1062

1063 1064
      if (u_sf_mode == 1) {
        std::cerr << "USRP device initialized in subframes record mode" << std::endl;
1065 1066
      }

1067 1068 1069 1070
#endif
      sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
      LOG_I(PHY,"Checking for USRPs : UHD %s (%d.%d.%d)\n",
            uhd::get_version_string().c_str(),vers,subvers,subsubvers);
laurent's avatar
laurent committed
1071

1072 1073 1074
      std::string args;
      if (openair0_cfg[0].sdr_addrs == NULL) {
        args = "type=b200";
1075
      } else {
1076
        args = openair0_cfg[0].sdr_addrs;
1077 1078
      }

1079
      uhd::device_addrs_t device_adds = uhd::device::find(args);
1080

1081
      if (device_adds.size() == 0) {
1082
        LOG_E(HW,"No USRP Device Found.\n ");
1083 1084 1085
        free(s);
        return -1;
      } else if (device_adds.size() > 1) {
1086
        LOG_E(HW,"More than one USRP Device Found. Please specify device more precisely in config file.\n");
1087 1088 1089
	free(s);
	return -1;
      }
laurent's avatar
laurent committed
1090

1091
      LOG_I(HW,"Found USRP %s\n", device_adds[0].get("type").c_str());
1092
      double usrp_master_clock;
laurent's avatar
laurent committed
1093

1094 1095 1096 1097
      if (device_adds[0].get("type") == "b200") {
        printf("Found USRP b200\n");
        device->type = USRP_B200_DEV;
        usrp_master_clock = 30.72e6;
1098
        args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
1099
        args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=7680, recv_frame_size=7680" ;
1100
      }
laurent's avatar
laurent committed
1101

1102 1103 1104 1105 1106 1107
      if (device_adds[0].get("type") == "n3xx") {
        printf("Found USRP n300\n");
        device->type=USRP_X300_DEV; //treat it as X300 for now
        usrp_master_clock = 122.88e6;
        args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
      }
1108

1109 1110 1111 1112 1113 1114
      if (device_adds[0].get("type") == "x300") {
        printf("Found USRP x300\n");
        device->type=USRP_X300_DEV;
        usrp_master_clock = 184.32e6;
        args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
      }
1115

1116
      s->usrp = uhd::usrp::multi_usrp::make(args);
laurent's avatar
laurent committed
1117

1118 1119 1120 1121 1122
      // lock mboard clocks
      if (openair0_cfg[0].clock_source == internal)
        s->usrp->set_clock_source("internal");
      else
        s->usrp->set_clock_source("external");
laurent's avatar
laurent committed
1123

1124
      if (device->type==USRP_X300_DEV) {
1125
        openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
1126
#if defined(USRP_REC_PLAY)
1127 1128 1129
        std::cerr << "-- Using calibration table: calib_table_x310" << std::endl; // Bell Labs info
#endif
        LOG_I(PHY,"%s() sample_rate:%u\n", __FUNCTION__, (int)openair0_cfg[0].sample_rate);
1130

1131 1132 1133 1134 1135 1136 1137 1138
        switch ((int)openair0_cfg[0].sample_rate) {
          case 122880000:
            // from usrp_time_offset
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 15; //to be checked
            openair0_cfg[0].tx_bw                 = 80e6;
            openair0_cfg[0].rx_bw                 = 80e6;
            break;
1139

1140 1141 1142 1143 1144 1145 1146
          case 61440000:
            // from usrp_time_offset
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 15;
            openair0_cfg[0].tx_bw                 = 40e6;
            openair0_cfg[0].rx_bw                 = 40e6;
            break;
Massive's avatar
Massive committed
1147

1148 1149 1150 1151 1152 1153 1154
          case 30720000:
            // from usrp_time_offset
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 15;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;
Massive's avatar
Massive committed
1155

1156 1157 1158 1159 1160 1161
          case 15360000:
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 45;
            openair0_cfg[0].tx_bw                 = 10e6;
            openair0_cfg[0].rx_bw                 = 10e6;
            break;
1162

1163 1164 1165 1166 1167 1168
          case 7680000:
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 50;
            openair0_cfg[0].tx_bw                 = 5e6;
            openair0_cfg[0].rx_bw                 = 5e6;
            break;
1169

1170 1171 1172 1173 1174 1175
          case 1920000:
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 50;
            openair0_cfg[0].tx_bw                 = 1.25e6;
            openair0_cfg[0].rx_bw                 = 1.25e6;
            break;
Laurent's avatar
Laurent committed
1176

1177 1178 1179 1180
          default:
            LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
            exit(-1);
            break;
laurent's avatar
laurent committed
1181
        }
1182
      }
Laurent's avatar
Laurent committed
1183

1184
      if (device->type == USRP_B200_DEV) {
1185 1186 1187
        if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
          openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
          bw_gain_adjust=0;
1188
#if defined(USRP_REC_PLAY)
1189 1190 1191 1192 1193
          std::cerr << "-- Using calibration table: calib_table_b210" << std::endl; // Bell Labs info
#endif
        } else {
          openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
          bw_gain_adjust=1;
1194
#if defined(USRP_REC_PLAY)
1195 1196
          std::cerr << "-- Using calibration table: calib_table_b210_38" << std::endl; // Bell Labs info
#endif
laurent's avatar
laurent committed
1197
        }
1198

1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243
        switch ((int)openair0_cfg[0].sample_rate) {
          case 30720000:
            s->usrp->set_master_clock_rate(30.72e6);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 115;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 23040000:
            s->usrp->set_master_clock_rate(23.04e6); //to be checked
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 113;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 15360000:
            s->usrp->set_master_clock_rate(30.72e06);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 103;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 7680000:
            s->usrp->set_master_clock_rate(30.72e6);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 80;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 1920000:
            s->usrp->set_master_clock_rate(30.72e6);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 40;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          default:
            LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
            exit(-1);
            break;
laurent's avatar
laurent committed
1244
        }
1245
      }
laurent's avatar
laurent committed
1246

1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266
      /* device specific */
      //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
      //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
      openair0_cfg[0].iq_txshift = 4;//shift
      openair0_cfg[0].iq_rxrescale = 15;//rescale iqs

      for(int i=0; i<s->usrp->get_rx_num_channels(); i++) {
        if (i<openair0_cfg[0].rx_num_channels) {
          s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
          s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
          set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
          ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
          // limit to maximum gain
          AssertFatal( openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] <= gain_range.stop(),
                       "RX Gain too high, lower by %f dB\n",
                       openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
          s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
          LOG_I(PHY,"RX Gain %d %f (%f) => %f (max %f)\n",i,
                openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
                openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
laurent's avatar
laurent committed
1267
        }
1268
      }
laurent's avatar
laurent committed
1269

1270
      LOG_D(PHY, "usrp->get_tx_num_channels() == %zd\n", s->usrp->get_tx_num_channels());
1271
      LOG_D(PHY, "openair0_cfg[0].tx_num_channels == %d\n", openair0_cfg[0].tx_num_channels);
1272

1273 1274
      for(int i=0; i<s->usrp->get_tx_num_channels(); i++) {
        ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(i);
1275

1276 1277 1278 1279
        if (i<openair0_cfg[0].tx_num_channels) {
          s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
          s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
          s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[i],i);
1280
          LOG_I(PHY,"USRP TX_GAIN:%3.2lf gain_range:%3.2lf tx_gain:%3.2lf\n", gain_range_tx.stop()-openair0_cfg[0].tx_gain[i], gain_range_tx.stop(), openair0_cfg[0].tx_gain[i]);
laurent's avatar
laurent committed
1281
        }
1282
      }
laurent's avatar
laurent committed
1283

1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295
      //s->usrp->set_clock_source("external");
      //s->usrp->set_time_source("external");
      // display USRP settings
      LOG_I(PHY,"Actual master clock: %fMHz...\n",s->usrp->get_master_clock_rate()/1e6);
      sleep(1);
      // create tx & rx streamer
      uhd::stream_args_t stream_args_rx("sc16", "sc16");
      int samples=openair0_cfg[0].sample_rate;
      int max=s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps();
      samples/=10000;
      LOG_I(PHY,"RF board max packet size %u, size for 100µs jitter %d \n", max, samples);

1296
      if ( samples < max ) {
1297
        stream_args_rx.args["spp"] = str(boost::format("%d") % samples );
1298
      }
1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328

      LOG_I(PHY,"rx_max_num_samps %zu\n",
            s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps());

      for (int i = 0; i<openair0_cfg[0].rx_num_channels; i++)
        stream_args_rx.channels.push_back(i);

      s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
      uhd::stream_args_t stream_args_tx("sc16", "sc16");

      for (int i = 0; i<openair0_cfg[0].tx_num_channels; i++)
        stream_args_tx.channels.push_back(i);

      s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);

      /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
      for(int i=0; i<s->usrp->get_tx_num_channels() && i<openair0_cfg[0].tx_num_channels; i++)
        s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);

      for(int i=0; i<s->usrp->get_rx_num_channels() && i<openair0_cfg[0].rx_num_channels; i++)
        s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);

      for (int i=0; i<openair0_cfg[0].rx_num_channels; i++) {
        LOG_I(PHY,"RX Channel %d\n",i);
        LOG_I(PHY,"  Actual RX sample rate: %fMSps...\n",s->usrp->get_rx_rate(i)/1e6);
        LOG_I(PHY,"  Actual RX frequency: %fGHz...\n", s->usrp->get_rx_freq(i)/1e9);
        LOG_I(PHY,"  Actual RX gain: %f...\n", s->usrp->get_rx_gain(i));
        LOG_I(PHY,"  Actual RX bandwidth: %fM...\n", s->usrp->get_rx_bandwidth(i)/1e6);
        LOG_I(PHY,"  Actual RX antenna: %s...\n", s->usrp->get_rx_antenna(i).c_str());
      }
laurent's avatar
laurent committed
1329

1330 1331 1332 1333 1334 1335 1336 1337
      for (int i=0; i<openair0_cfg[0].tx_num_channels; i++) {
        LOG_I(PHY,"TX Channel %d\n",i);
        LOG_I(PHY,"  Actual TX sample rate: %fMSps...\n", s->usrp->get_tx_rate(i)/1e6);
        LOG_I(PHY,"  Actual TX frequency: %fGHz...\n", s->usrp->get_tx_freq(i)/1e9);
        LOG_I(PHY,"  Actual TX gain: %f...\n", s->usrp->get_tx_gain(i));
        LOG_I(PHY,"  Actual TX bandwidth: %fM...\n", s->usrp->get_tx_bandwidth(i)/1e6);
        LOG_I(PHY,"  Actual TX antenna: %s...\n", s->usrp->get_tx_antenna(i).c_str());
      }
laurent's avatar
laurent committed
1338

1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367
      LOG_I(PHY,"Device timestamp: %f...\n", s->usrp->get_time_now().get_real_secs());
      device->priv = s;
      device->trx_start_func = trx_usrp_start;
      device->trx_write_func = trx_usrp_write;
      device->trx_read_func  = trx_usrp_read;
      device->trx_get_stats_func = trx_usrp_get_stats;
      device->trx_reset_stats_func = trx_usrp_reset_stats;
      device->trx_end_func   = trx_usrp_end;
      device->trx_stop_func  = trx_usrp_stop;
      device->trx_set_freq_func = trx_usrp_set_freq;
      device->trx_set_gains_func   = trx_usrp_set_gains;
      device->openair0_cfg = openair0_cfg;
      s->sample_rate = openair0_cfg[0].sample_rate;

      // TODO:
      // init tx_forward_nsamps based usrp_time_offset ex
      if(is_equal(s->sample_rate, (double)30.72e6))
        s->tx_forward_nsamps  = 176;

      if(is_equal(s->sample_rate, (double)15.36e6))
        s->tx_forward_nsamps = 90;

      if(is_equal(s->sample_rate, (double)7.68e6))
        s->tx_forward_nsamps = 50;

      if (s->use_gps == 1) {
        if (sync_to_gps(device)) {
          LOG_I(PHY,"USRP fails to sync with GPS...\n");
          exit(0);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1368
        }
1369
      }
1370 1371 1372 1373

#if defined(USRP_REC_PLAY)
    }

1374 1375
#endif
#if defined(USRP_REC_PLAY)
1376 1377 1378 1379 1380 1381 1382

    if (u_sf_mode == 1) { // record mode
      ms_sample = (iqrec_t *) malloc(u_sf_max * sizeof(iqrec_t));

      if (ms_sample == NULL) {
        std::cerr<< "Memory allocation failed for subframe record or replay mode." << std::endl;
        exit(-1);
1383
      }
1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445

      memset(ms_sample, 0, u_sf_max * BELL_LABS_IQ_BYTES_PER_SF);
    }

    if (u_sf_mode == 2) {
      if (use_mmap) {
        // use mmap
        mmapfd = open(u_sf_filename, O_RDONLY | O_LARGEFILE);

        if (mmapfd != 0) {
          fstat(mmapfd, &sb);
          std::cerr << "Loading subframes using mmap() from " << u_sf_filename << " size=" << (uint64_t)sb.st_size << " bytes ..." << std::endl;
          ms_sample = (iqrec_t *) mmap(NULL, sb.st_size, PROT_WRITE, MAP_PRIVATE, mmapfd, 0);

          if (ms_sample != MAP_FAILED) {
            nb_samples = (sb.st_size / sizeof(iqrec_t));
            int aligned = (((unsigned long)ms_sample & 31) == 0)? 1:0;
            std::cerr<< "Loaded "<< nb_samples << " subframes." << std::endl;

            if (aligned == 0) {
              std::cerr<< "mmap address is not 32 bytes aligned, exiting." << std::endl;
              close(mmapfd);
              exit(-1);
            }
          } else {
            std::cerr << "Cannot mmap file, exiting." << std::endl;
            close(mmapfd);
            exit(-1);
          }
        } else {
          std::cerr << "Cannot open " << u_sf_filename << " , exiting." << std::endl;
          exit(-1);
        }
      } else {
        iqfd = open(u_sf_filename, O_RDONLY | O_LARGEFILE);

        if (iqfd != 0) {
          fstat(iqfd, &sb);
          nb_samples = (sb.st_size / sizeof(iqrec_t));
          std::cerr << "Loading " << nb_samples << " subframes from " << u_sf_filename
                    << " size=" << (uint64_t)sb.st_size << " bytes ..." << std::endl;
          // allocate buffer for 1 sample at a time
          ms_sample = (iqrec_t *) malloc(sizeof(iqrec_t));

          if (ms_sample == NULL) {
            std::cerr<< "Memory allocation failed for individual subframe replay mode." << std::endl;
            close(iqfd);
            exit(-1);
          }

          memset(ms_sample, 0, sizeof(iqrec_t));

          // point at beginning of file
          if (lseek(iqfd, 0, SEEK_SET) == 0) {
            std::cerr << "Initial seek at beginning of the file" << std::endl;
          } else {
            std::cerr << "Problem initial seek at beginning of the file" << std::endl;
          }
        } else {
          std::cerr << "Cannot open " << u_sf_filename << " , exiting." << std::endl;
          exit(-1);
        }
1446
      }
laurent's avatar
laurent committed
1447
    }
1448 1449 1450 1451

#endif
    return 0;
  }
Raymond Knopp's avatar
 
Raymond Knopp committed
1452
}
1453
/*@}*/