gnb.band78.tm1.217PRB.usrpx300.conf 10 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";

gNBs =
(
 {
    ////////// Identification parameters:
    gNB_ID    =  0xe00;

    cell_type =  "CELL_MACRO_GNB";

    gNB_name  =  "gNB-Eurecom-5GNRBox";

    // Tracking area code, 0x0000 and 0xfffe are reserved values
    tracking_area_code  =  1;

    plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});	 

    tr_s_preference     = "local_mac"

    ////////// Physical parameters:

24
    ssb_SubcarrierOffset                                      = 0;
25
    pdsch_AntennaPorts                                        = 1;
26
    pusch_AntennaPorts                                        = 1;
27 28
	
    servingCellConfigCommon = (
29
    {
30
 #spCellConfigCommon
31

32
      physCellId                                                    = 0;
33

34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
#  downlinkConfigCommon
    #frequencyInfoDL
      # this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
      absoluteFrequencySSB                                          = 642016;
      dl_frequencyBand                                                 = 78;
      # this is 3600 MHz
      dl_absoluteFrequencyPointA                                       = 640000;
      #scs-SpecificCarrierList
        dl_offstToCarrier                                              = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
        dl_subcarrierSpacing                                           = 1;
        dl_carrierBandwidth                                            = 217;
     #initialDownlinkBWP
      #genericParameters
49 50
        # this is RBstart=74,L=50 (275*(L-1))+RBstart
        initialDLBWPlocationAndBandwidth                                        = 13549;
51 52 53 54
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
        initialDLBWPsubcarrierSpacing                                           = 1;
      #pdcch-ConfigCommon
55
        initialDLBWPcontrolResourceSetZero                                      = 0;
56 57 58
        initialDLBWPsearchSpaceZero                                             = 0;
      #pdsch-ConfigCommon
        #pdschTimeDomainAllocationList (up to 16 entries)
59 60 61 62 63 64 65 66
        initialDLBWPk0_0                    = 0;  #for DL slot
        initialDLBWPmappingType_0           = 0;  #0=typeA,1=typeB
        initialDLBWPstartSymbolAndLength_0  = 40; #this is SS=1,L=13

        initialDLBWPk0_1                    = 0;  #for mixed slot
        initialDLBWPmappingType_1           = 0;
        initialDLBWPstartSymbolAndLength_1  = 57; #this is SS=1,L=5

67 68 69 70 71 72 73 74 75 76 77 78
  #uplinkConfigCommon 
     #frequencyInfoUL
      ul_frequencyBand                                                 = 78;
      #scs-SpecificCarrierList
      ul_offstToCarrier                                              = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
      ul_subcarrierSpacing                                           = 1;
      ul_carrierBandwidth                                            = 217;
      pMax                                                          = 20;
     #initialUplinkBWP
      #genericParameters
79
        initialULBWPlocationAndBandwidth                                        = 13549;
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
        initialULBWPsubcarrierSpacing                                           = 1;
      #rach-ConfigCommon
        #rach-ConfigGeneric
          prach_ConfigurationIndex                                  = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
          prach_msg1_FDM                                            = 0;
          prach_msg1_FrequencyStart                                 = 0;
          zeroCorrelationZoneConfig                                 = 13;
          preambleReceivedTargetPower                               = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
          preambleTransMax                                          = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
        powerRampingStep                                            = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
        ra_ResponseWindow                                           = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
Francesco Mani's avatar
Francesco Mani committed
101 102
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
103 104 105 106 107 108 109
#oneHalf (0..15) 4,8,12,16,...60,64
        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
        ra_ContentionResolutionTimer                                = 7;
        rsrp_ThresholdSSB                                           = 19;
#prach-RootSequenceIndex_PR
Francesco Mani's avatar
Francesco Mani committed
110 111
#1 = 839, 2 = 139
        prach_RootSequenceIndex_PR                                  = 2;
112 113 114 115 116 117 118 119 120
        prach_RootSequenceIndex                                     = 1;
        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
        #  
        msg1_SubcarrierSpacing                                      = 1,

# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
        restrictedSetConfig                                         = 0,
      # pusch-ConfigCommon (up to 16 elements)
121
        initialULBWPk2_0                      = 2;  # used for UL slot
122
        initialULBWPmappingType_0             = 1
123
        initialULBWPstartSymbolAndLength_0    = 41; # this is SS=0 L=13
124 125

        initialULBWPk2_1                      = 2;  # used for mixed slot
126
        initialULBWPmappingType_1             = 1;
127
        initialULBWPstartSymbolAndLength_1    = 69; # this is SS=10 L=2
128

129 130 131
        initialULBWPk2_2                      = 7;  # used for Msg.3 during RA
        initialULBWPmappingType_2             = 1;
        initialULBWPstartSymbolAndLength_2    = 52; # this is SS=10 L=4
132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162

        msg3_DeltaPreamble                                          = 1;
        p0_NominalWithGrant                                         =-90;

# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
        pucchGroupHopping                                           = 0;
        hoppingId                                                   = 40;
        p0_nominal                                                  = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
      ssb_PositionsInBurst_PR                                       = 2;
      ssb_PositionsInBurst_Bitmap                                   = 255;

# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
      ssb_periodicityServingCell                                    = 2;

# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
      dmrs_TypeA_Position                                           = 0;

# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
      subcarrierSpacing                                             = 1;


  #tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
163
      referenceSubcarrierSpacing                                    = 1;
164 165 166
      # pattern1 
      # dl_UL_TransmissionPeriodicity
      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
167
      dl_UL_TransmissionPeriodicity                                 = 6;
168 169 170 171 172
      nrofDownlinkSlots                                             = 7;
      nrofDownlinkSymbols                                           = 6;
      nrofUplinkSlots                                               = 2;
      nrofUplinkSymbols                                             = 4;

173
      ssPBCH_BlockPower                                             = -25;
174 175 176
  }

  );
177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219


    # ------- SCTP definitions
    SCTP :
    {
        # Number of streams to use in input/output
        SCTP_INSTREAMS  = 2;
        SCTP_OUTSTREAMS = 2;
    };


    ////////// MME parameters:
    mme_ip_address      = ( { ipv4       = "192.168.12.26";
                              ipv6       = "192:168:30::17";
                              active     = "yes";
                              preference = "ipv4";
                            }
                          );

    NETWORK_INTERFACES :
    {

        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
        GNB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
        GNB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
    };
  }
);

MACRLCs = (
	{
	num_cc = 1;
	tr_s_preference = "local_L1";
	tr_n_preference = "local_RRC";
        }  
);

L1s = (
    	{
	num_cc = 1;
	tr_n_preference = "local_mac";
220
        pusch_proc_threads = 8;
221 222 223 224 225 226
        }  
);

RUs = (
    {		  
       local_rf       = "yes"
227
         nb_tx          = 1
228 229 230 231 232 233 234
         nb_rx          = 1
         att_tx         = 0
         att_rx         = 0;
         bands          = [7];
         max_pdschReferenceSignalPower = -27;
         max_rxgain                    = 114;
         eNB_instances  = [0];
235
	 sdr_addrs = "type=x300";
236 237 238 239 240 241
    }
);  

THREAD_STRUCT = (
  {
    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
242
    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
243
    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
244
    worker_config      = "WORKER_ENABLE";
245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265
  }
);

     log_config :
     {
       global_log_level                      ="info";
       global_log_verbosity                  ="medium";
       hw_log_level                          ="info";
       hw_log_verbosity                      ="medium";
       phy_log_level                         ="info";
       phy_log_verbosity                     ="medium";
       mac_log_level                         ="info";
       mac_log_verbosity                     ="high";
       rlc_log_level                         ="info";
       rlc_log_verbosity                     ="medium";
       pdcp_log_level                        ="info";
       pdcp_log_verbosity                    ="medium";
       rrc_log_level                         ="info";
       rrc_log_verbosity                     ="medium";
    };