With 50 RBs and 100 RBs the UE crashes in the basic simulator
because of false detection of DCIs.

Putting nothing in the unused REs in the DCI instead of random
bits solves this issue and let the basic simulator run with 50 RBs
and 100 RBs.

Note that in the real UE the problem needs to be solved because
the channel may lead to false DCI detection and the consequent
crashes have to be solved. This commit sort of "hides" the issue
to have the basic simulator functional.

Note also that putting nothing in the unused REs in the DCI should
be the normal general case. But it has not been tested with anything
but the basic simulator so the previous code is left.

Before this commit we were checking for UE->is_synchronized == 0
then we were waiting for a potentially active synch routine to
finish and then we were starting the synch routine again but the
synch routine that was running may have set UE->is_synchronized
to 1. This was leading to various problems, most notably the following
message repeated over and over in the UE log and the UE unable to
connect properly:

    [RRC]  [UE 0] Frame 377: OUT OF SYNC FROM eNB 0 (T310 active 0 : T310 0, N310 345, N311 0)

So let's wait for a potentially active synch routine to finish
before anything else.

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

    added more statistics on iperf server report analysis
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

    fix main.py help message
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

 -- no more -x option at compilation time
 -- iperf server report crash better handled
   -- python executor retrieve iperf server files in case of failure to analyze
   -- comparison w/ requested bandwidth
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Summary of changes:
- fix compilation on CentOS
- some work on the T tracer:
  - add a 'multi' tracer to connect several tracers at the same time
  - improve 'to_vcd' to be compatible with previous VCD traces
- preliminary work for X2 handover
- various bug fixes

A new version of asn1c is to be used with this commit.
Do:
  cd [top directory of repository]
  source oaienv
  cd cmake_targets
  ./build_oai -I

As reported by Konstantinos Alexandris and Robert Schmidt.

As reported by Robert Schmidt.

Merge remote-tracking branch 'origin/fix_missing_s1ap_15.2.0_asn_module_and_update_asn1c_commit' into develop_integration_2018_w33

- 'busy' has to be handled in a more atomic fashion to avoid crazy
  runtime race conditions
- the basic simulator is too fast sometimes; rewrite the accesses to
  the T cache to avoid there again crazy behaviors

Hopefully that's better...

This commit removes the warning:
make[4]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.

Basically, inside a Makefile we should use $(MAKE) instead of make.

Since VCD has now to go through the T tracer, we enforce the consistency
of data found in common/utils/LOG/vcd_signal_dumper.[ch] with data
found in common/utils/T/T_messages.txt.

We might get completely rid of common/utils/LOG/vcd_signal_dumper.[ch] at some
point. For the moment, let's keep it.

This commit adds the program common/utils/T/check_vcd.c and necessary
modifications to enforce its use at compilation time.

If you modify common/utils/LOG/vcd_signal_dumper.[ch] but do not update
common/utils/T/T_messages.txt an error will pop up when you compile the
software. You have to keep both modules synchronized.

Compilation of UE softmodem failed.

 - fix when FDD slave job fails, it still retrieves the HTML report
 - improvement in HTML report, stats per UE for attach, ping, iperf
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Use "error:" as prefix to error messages in genids.c
to help looking for errors in case of failure of
the build.

Don't use shm anymore. Use mmap directly.

Check result of send_is_on and close connection to tracee on error.

Make it compatible with 'template' gtwave files as found in openair's
repository.

The type VCD_NAME was added to the VCD IDs in T_messages.txt.
The database processing code was adapted to use it.
The tracer to_vcd was adapted to use it and render the produced vcd
output compatible with the 'template' gtkwave files.

When running to_vcd, do not forget to pass -vcd to use this feature.

This tracer allows the connection of several tracers to one tracee.

To use the multi tracer:
- run the tracee as usual, eg. ./lte-softmodem -O xxxx.conf --T_stdout 0
- run the multi tracer: ./multi -d ../T_messages.txt
- connect other tracers to the multi tracer:
   - ./enb -d ../T_messages.txt -p 2022
   - ./textlog -d ../T_messages.txt -p 2022
   - etc.

By default the multi tracer connects to the tracee to the port 2021,
as for any other tracer.

Then it accepts connections from other tracers on the port 2022.

This can be changed with parameters on the command line.

The tracee and the other tracers can be stopped/started at any time.

- bug fixed in ue and enb tracer: the socket needs to be closed
  in case of restart
- cleanup: fix spacing in T_messages.txt

Summary of changes:
- bug fixes in various places

A better solution has to be found.