added no_DTX function to eNB. This fills the TX subframes which have no PDSCH with a fake pdsch. It avoids switching between TX/RX in TDD systems during the DL periods.

 - physical simulators
 - LTE eNB
 - LTE UE
 - 5G-NR gNB

Still NR-UE does not build and eNB segs fault at start of program
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

remove RRC_VERSION macros, simplify build-oai and CMakefile.txt accordingly, get rid of remaining compilation warnings (opt module improperly merged and patch asn1c files with tests against max 64 bits integer value)

	ACKNOWLEDGEMENT:
 	1. This commit was developed at Vicomtech (https://www.vicomtech.org) under UE project CDN-X-ALL: "CDN edge-cloud computing for efficient cache and reliable streaming aCROSS Aggregated unicast-multicast LinkS"
 	2. Project funded by Fed4FIRE+ OC5 (https://www.fed4fire.eu)
Signed-off-by: javier.morgade@ieee.org <javier.morgade@ieee.org>

usage of setAllfromTS in also monolitic version, RACH detected to the cu, several bugs fixed, still no attach complete

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

changes in PARALLEL_RU_L!_TRX_SPLIT configuration. Correction of a few bugs related to passing of variables between threads

end_of_burst_delay is used to stop TX only "after a while".
If we stop right after effective signal, with USRP B210 and
B200mini, we observe a high EVM on the S subframe (on the
PSS).
A value of 400 (for 30.72MHz) solves this issue. This is
the default.

This default value can be changed in the configuration file.
For example:

RUs = (
    {
       local_rf       = "yes"
         nb_tx          = 1
         nb_rx          = 1
         att_tx         = 20
         att_rx         = 0;
         bands          = [7];
         max_pdschReferenceSignalPower = -27;
         max_rxgain                    = 105;
         eNB_instances  = [0];
         sf_extension = 312;
         end_of_burst_delay = 200;
    }
);

Here we would set a value of 200.

The value to put in the configuration file is for
30.72MHz. The value is scaled accordingly at runtime
(thus only one value to set for every RB configuration,
25, 50 or 100, leading to less problems when adapting
configuration files).

This option is for experts and should not be changed
randomly.

This parameter is meaningful in TDD, to decide
when to start DL at eNB side. Since there is a
need for the PA to be operational, we need to
transmit a bit before the DL subframe coming
after an UL subframe. (We transmit zeros.)

We used to use N_TA_offset which may be too much.
Default value is now N_TA_offset/2 and can be
changed in the configuration file, in the RUs
section, like:

RUs = (
    {
       local_rf       = "yes"
         nb_tx          = 1
         nb_rx          = 1
         att_tx         = 0
         att_rx         = 0;
         bands          = [7];
         max_pdschReferenceSignalPower = -27;
         max_rxgain                    = 105;
         eNB_instances  = [0];
         sf_extension = 312;
    }
);

N_TA_offset is 624 (for 30.72MHz). In the example
above, we set sf_extension = 312, which is also
the default.

The value to put in the configuration file is for
30.72MHz. The value is scaled accordingly at runtime
(thus only one value to set for every RB configuration,
25, 50 or 100, leading to less problems when adapting
configuration files).

This option is for experts and should not be changed
randomly.

parameters for PRACH/PUCCH in configuration file. Default values are those used for Band 7. eMTC configuration file for eMTC changed to reflect modification made for Band 13 operation.

For whatever reason most of the files had their permission
changed from 644 to 755, which is not wanted.