Updates in nsa_b200_gnb

1. Docker compose yaml
2. eNB config : gnb.nsa.band78.106prb.usrpb200.conf

ci-scripts/conf_files/gnb.nsa.band78.106prb.usrpb200.conf

+Active_gNBs = ( "gNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    cell_type =  "CELL_MACRO_GNB";
+    gNB_name  =  "gNB-in-docker";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({mcc = 222; mnc = 01; mnc_length = 2;});   
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+ 
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 641272; //641032;      #641968; 641968=start of ssb at 3600MHz + 82 RBs    641032=center of SSB at center of cell
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=84,L=13 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 0;
+        initialDLBWPsearchSpaceZero                                             = 0;
+
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -100;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 5;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14; //15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        msg1_SubcarrierSpacing                                      = 1,
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1; #0x80;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7; //8; //7;
+      nrofDownlinkSymbols                                           = 6; //0; //6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4; //0; //4;
+
+  ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+#    mme_ip_address      = ( { ipv4       = "192.168.68.130";
+#                              ipv6       = "192:168:30::17";
+#                              port       = 36412 ;
+#                              active     = "yes";
+#                              preference = "ipv4";
+#                            }
+#                          );
+
+    ///X2
+    enable_x2         = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    target_enb_x2_ip_address = ( { ipv4       = "192.168.68.130";
+                                   ipv6       = "192:168:30::17";
+                                   preference = "ipv4";
+                                 }
+                               );
+
+    NETWORK_INTERFACES :
+    {
+      GNB_INTERFACE_NAME_FOR_S1_MME  = "eth0";
+      GNB_IPV4_ADDRESS_FOR_S1_MME    = "192.168.68.194";
+      GNB_INTERFACE_NAME_FOR_S1U     = "eth0";
+      GNB_IPV4_ADDRESS_FOR_S1U       = "192.168.68.194";
+      GNB_PORT_FOR_S1U               = 2152; # Spec 2152
+      GNB_IPV4_ADDRESS_FOR_X2C       = "192.168.68.194";
+      GNB_PORT_FOR_X2C               = 36422; # Spec 36422
+    };
+
+  }
+);
+
+MACRLCs = (
+  {
+    num_cc              = 1;
+    tr_s_preference     = "local_L1";
+    tr_n_preference     = "local_RRC";
+    pusch_TargetSNRx10  = 200;
+    pucch_TargetSNRx10  = 200;
+    ulsch_max_frame_inactivity = 0;
+  }
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference = "local_mac";
+  ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
+}
+);
+
+RUs = (
+  {
+    local_rf       = "yes"
+    nb_tx          = 1
+    nb_rx          = 1
+    att_tx         = 12
+    att_rx         = 12;
+    bands          = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain     = 114;
+    eNB_instances  = [0];
+#    sdr_addrs = "serial=30C51D4";
+#    clock_src      = "external";
+  }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level      ="info";
+  hw_log_level          ="info";
+  phy_log_level         ="info";
+  mac_log_level         ="info";
+  rlc_log_level         ="info";
+  pdcp_log_level        ="info";
+  rrc_log_level         ="info";
+};
+
+uicc: {
+  opc = "testopc";
+};

ci-scripts/yaml_files/nsa_b200_gnb/docker-compose.yml

@@ -6,25 +6,11 @@ services:
         privileged: true
         container_name: nsa-b200-gnb
         environment:
-            USE_NSA_TDD_MONO: 'yes'
             USE_B2XX: 'yes'
-            GNB_NAME: gNB-in-docker
-            MCC: '222'
-            MNC: '01'
-            MNC_LENGTH: 2
-            TAC: 1
-            ENABLE_X2: 'yes'
-            ENB_X2_IP_ADDRESS: 192.168.68.130
-            MME_S1C_IP_ADDRESS: 172.21.16.137
-            GNB_S1C_IF_NAME: eth0
-            GNB_S1C_IP_ADDRESS: 192.168.68.194
-            GNB_S1U_IF_NAME: eth0
-            GNB_S1U_IP_ADDRESS: 192.168.68.194
-            GNB_X2_IP_ADDRESS: 192.168.68.194
-            RRC_INACTIVITY_THRESHOLD: 0
-            THREAD_PARALLEL_CONFIG: PARALLEL_RU_L1_TRX_SPLIT
+            USE_VOLUMED_CONF: 'yes'
             USE_ADDITIONAL_OPTIONS: -E -q --RUs.[0].sdr_addrs serial=30C51D4 --continuous-tx --log_config.global_log_options level,nocolor,time,line_num,function
         volumes:
+            - ../../conf_files/gnb.nsa.band78.106prb.usrpb200.conf:/opt/oai-gnb/etc/mounted.conf
             - /dev:/dev
         networks:
             public_net: