re-adding the possibility in dlsim to bypass the DCI/PDCCH generation. This is...

re-adding the possibility in dlsim to bypass the DCI/PDCCH generation. This is necessary for accuracy of the dlsim-tests, which are working again now.

cmake_targets/lte-simulators/CMakeLists.txt

@@ -3,7 +3,7 @@ set(PACKAGE_NAME "unitary_tests_simulators")
 set(PHYSIM True)
 set(RF_BOARD None)
 set(XFORMS True)
-
+set(ENABLE_ITTI False)
 set(DEBUG_PHY False)
 set(MU_RECIEVER False)
 set(RANDOM_BF False)

openair1/SCHED/defs.h

@@ -102,7 +102,7 @@ void phy_procedures_eNB_lte(uint8_t subframe,PHY_VARS_eNB **phy_vars_eNB,uint8_t
   @param r_type indicates the relaying operation: 0: no_relaying, 1: unicast relaying type 1, 2: unicast relaying type 2, 3: multicast relaying
   @param *phy_vars_rn pointer to RN variables
 */
-void phy_procedures_UE_lte(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,runmode_t mode,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn);
+void phy_procedures_UE_lte(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn);
 
 #if defined(Rel10) || defined(Rel14)
 /*! \brief Top-level entry routine for relay node procedures when acting as eNB. This proc will make us of the existing eNB procs.
@@ -138,7 +138,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t
   @param r_type indicates the relaying operation: 0: no_relaying, 1: unicast relaying type 1, 2: unicast relaying type 2, 3: multicast relaying
   @param phy_vars_rn pointer to RN variables
 */
-int phy_procedures_UE_RX(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,runmode_t mode,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn);
+int phy_procedures_UE_RX(PHY_VARS_UE *phy_vars_ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn);
 
 /*! \brief Scheduling for UE TX procedures in TDD S-subframes.
   @param phy_vars_ue Pointer to UE variables on which to act
@@ -163,7 +163,7 @@ void phy_procedures_UE_S_RX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abst
   @param phy_vars_rn pointer to the RN variables
   @param do_meas Do inline timing measurement
 */
-void phy_procedures_eNB_TX(PHY_VARS_eNB *phy_vars_eNB,eNB_rxtx_proc_t *proc,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn,int do_meas);
+void phy_procedures_eNB_TX(PHY_VARS_eNB *phy_vars_eNB,eNB_rxtx_proc_t *proc,relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn,int do_meas, int do_pdcch_flag);
 
 /*! \brief Scheduling for eNB RX UE-specific procedures in normal subframes.
   @param phy_vars_eNB Pointer to eNB variables on which to act

openair1/SCHED/phy_procedures_lte_eNb.c

@@ -1147,7 +1147,8 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
 			   eNB_rxtx_proc_t *proc,
                            relaying_type_t r_type,
 			   PHY_VARS_RN *rn,
-			   int do_meas)
+			   int do_meas,
+			   int do_pdcch_flag)
 {
   UNUSED(rn);
   int frame=proc->frame_tx;
@@ -1317,21 +1318,6 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
   }
 
 
-  num_pdcch_symbols = DCI_pdu->num_pdcch_symbols;
-  LOG_D(PHY,"num_pdcch_symbols %"PRIu8",(dci common %"PRIu8", dci uespec %"PRIu8"\n",num_pdcch_symbols,
-        DCI_pdu->Num_common_dci,DCI_pdu->Num_ue_spec_dci);
-
-#if defined(SMBV) 
-  // Sets up PDCCH and DCI table
-  if (smbv_is_config_frame(frame) && (smbv_frame_cnt < 4) && ((DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci)>0)) {
-    LOG_D(PHY,"[SMBV] Frame %3d, SF %d PDCCH, number of DCIs %d\n",frame,subframe,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci);
-    dump_dci(fp,&DCI_pdu->dci_alloc[0]);
-    smbv_configure_pdcch(smbv_fname,(smbv_frame_cnt*10) + (subframe),num_pdcch_symbols,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci);
-  }
-#endif
-
-  VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_DCI_INFO,DCI_pdu->num_pdcch_symbols);
-
   // loop over all DCIs for this subframe to generate DLSCH allocations
   for (i=0; i<DCI_pdu->Num_common_dci + DCI_pdu->Num_ue_spec_dci ; i++) {
     LOG_D(PHY,"[eNB] Subframe %d: DCI %d/%d : rnti %x, CCEind %d\n",subframe,i,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci,DCI_pdu->dci_alloc[i].rnti,DCI_pdu->dci_alloc[i].firstCCE);
@@ -1390,23 +1376,28 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
     eNB->num_common_dci[(subframe)&1]=0;
   }
 
+
   if (eNB->abstraction_flag == 0) {
+    if (do_pdcch_flag) {
+      if (DCI_pdu->Num_ue_spec_dci+DCI_pdu->Num_common_dci > 0) {
+	LOG_D(PHY,"[eNB %"PRIu8"] Frame %d, subframe %d: Calling generate_dci_top (pdcch) (common %"PRIu8",ue_spec %"PRIu8")\n",eNB->Mod_id,frame, subframe,
+	      DCI_pdu->Num_common_dci,DCI_pdu->Num_ue_spec_dci);
+      }
 
-    if (DCI_pdu->Num_ue_spec_dci+DCI_pdu->Num_common_dci > 0) {
-      LOG_D(PHY,"[eNB %"PRIu8"] Frame %d, subframe %d: Calling generate_dci_top (pdcch) (common %"PRIu8",ue_spec %"PRIu8")\n",eNB->Mod_id,frame, subframe,
-            DCI_pdu->Num_common_dci,DCI_pdu->Num_ue_spec_dci);
+      num_pdcch_symbols = generate_dci_top(DCI_pdu->Num_ue_spec_dci,
+					   DCI_pdu->Num_common_dci,
+					   DCI_pdu->dci_alloc,
+					   0,
+					   AMP,
+					   fp,
+					   eNB->common_vars.txdataF[0],
+					   subframe);
+    }
+    else {
+      num_pdcch_symbols = DCI_pdu->num_pdcch_symbols;
+      LOG_D(PHY,"num_pdcch_symbols %"PRIu8" (dci common %"PRIu8", dci uespec %"PRIu8")\n",num_pdcch_symbols,
+	    DCI_pdu->Num_common_dci,DCI_pdu->Num_ue_spec_dci);
     }
-
-
-    num_pdcch_symbols = generate_dci_top(DCI_pdu->Num_ue_spec_dci,
-                                         DCI_pdu->Num_common_dci,
-                                         DCI_pdu->dci_alloc,
-                                         0,
-                                         AMP,
-                                         fp,
-                                         eNB->common_vars.txdataF[0],
-                                         subframe);
-
   }
 
 #ifdef PHY_ABSTRACTION // FIXME this ifdef seems suspicious
@@ -1417,8 +1408,19 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
 
 #endif
 
+  VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_DCI_INFO,DCI_pdu->num_pdcch_symbols);
+
   VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_PDCCH_TX,0);
 
+#if defined(SMBV) 
+  // Sets up PDCCH and DCI table
+  if (smbv_is_config_frame(frame) && (smbv_frame_cnt < 4) && ((DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci)>0)) {
+    LOG_D(PHY,"[SMBV] Frame %3d, SF %d PDCCH, number of DCIs %d\n",frame,subframe,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci);
+    dump_dci(fp,&DCI_pdu->dci_alloc[0]);
+    smbv_configure_pdcch(smbv_fname,(smbv_frame_cnt*10) + (subframe),num_pdcch_symbols,DCI_pdu->Num_common_dci+DCI_pdu->Num_ue_spec_dci);
+  }
+#endif
+
   // Check for SI activity
 
   if ((eNB->dlsch_SI) && (eNB->dlsch_SI->active == 1)) {

openair1/SCHED/phy_procedures_lte_ue.c

@@ -3058,19 +3058,16 @@ int ue_pdcch_procedures(uint8_t eNB_id,PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint
 	(dci_alloc_rx[i].format != format0)) {
       
 
-      LOG_D(PHY,"[UE  %d][DCI][PDSCH %x] AbsSubframe %d.%d: format %d, num_pdcch_symbols %d, nCCE %d, total CCEs %d\n",
+      LOG_I(PHY,"[UE  %d][DCI][PDSCH %x] AbsSubframe %d.%d: format %d, num_pdcch_symbols %d, nCCE %d, total CCEs %d\n",
 	    ue->Mod_id,dci_alloc_rx[i].rnti,
 	    frame_rx%1024,subframe_rx,
 	    dci_alloc_rx[i].format,
 	    ue->pdcch_vars[subframe_rx & 0x1][eNB_id]->num_pdcch_symbols,
 	    ue->pdcch_vars[subframe_rx & 0x1][eNB_id]->nCCE[subframe_rx],
 	    get_nCCE(3,&ue->frame_parms,get_mi(&ue->frame_parms,0)));
-
-
-
-
       
-      //dump_dci(&ue->frame_parms, &dci_alloc_rx[i]);
+      dump_dci(&ue->frame_parms, &dci_alloc_rx[i]);
+
       if ((ue->UE_mode[eNB_id] > PRACH) &&
 	  (generate_ue_dlsch_params_from_dci(frame_rx,
 					     subframe_rx,
@@ -4014,7 +4011,8 @@ void ue_dlsch_procedures(PHY_VARS_UE *ue,
 
 
 }
-int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,runmode_t mode,
+int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,
+			 uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,
 			 relaying_type_t r_type,PHY_VARS_RN *phy_vars_rn) {
  
   int l,l2;
@@ -4043,20 +4041,20 @@ int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
 
   pmch_flag = is_pmch_subframe(frame_rx,subframe_rx,&ue->frame_parms) ? 1 : 0;
 
-
-  // deactivate reception until we scan pdcch
-  if (ue->dlsch[subframe_rx&0x1][eNB_id][0])
-    ue->dlsch[subframe_rx&0x1][eNB_id][0]->active = 0;
-  if (ue->dlsch[subframe_rx&0x1][eNB_id][1])
-    ue->dlsch[subframe_rx&0x1][eNB_id][1]->active = 0;
-
-  if (ue->dlsch_SI[eNB_id])
-    ue->dlsch_SI[eNB_id]->active = 0;
-  if (ue->dlsch_p[eNB_id])
-    ue->dlsch_p[eNB_id]->active = 0;
-  if (ue->dlsch_ra[eNB_id])
-    ue->dlsch_ra[eNB_id]->active = 0;
-
+  if (do_pdcch_flag) {
+    // deactivate reception until we scan pdcch
+    if (ue->dlsch[subframe_rx&0x1][eNB_id][0])
+      ue->dlsch[subframe_rx&0x1][eNB_id][0]->active = 0;
+    if (ue->dlsch[subframe_rx&0x1][eNB_id][1])
+      ue->dlsch[subframe_rx&0x1][eNB_id][1]->active = 0;
+    
+    if (ue->dlsch_SI[eNB_id])
+      ue->dlsch_SI[eNB_id]->active = 0;
+    if (ue->dlsch_p[eNB_id])
+      ue->dlsch_p[eNB_id]->active = 0;
+    if (ue->dlsch_ra[eNB_id])
+      ue->dlsch_ra[eNB_id]->active = 0;
+  }
   
 #ifdef DEBUG_PHY_PROC
   LOG_D(PHY,"[%s %d] Frame %d subframe %d: Doing phy_procedures_UE_RX\n",
@@ -4109,15 +4107,17 @@ int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
     }
     
     ue_measurement_procedures(l-1,ue,proc,eNB_id,(subframe_rx<<1),abstraction_flag,mode);
-    if ((l==pilot1) ||
-	((pmch_flag==1)&(l==l2)))  {
-      LOG_D(PHY,"[UE  %d] Frame %d: Calling pdcch procedures (eNB %d)\n",ue->Mod_id,frame_rx,eNB_id);
-      
-      if (ue_pdcch_procedures(eNB_id,ue,proc,abstraction_flag) == -1) {
-	LOG_E(PHY,"[UE  %d] Frame %d, subframe %d: Error in pdcch procedures\n",ue->Mod_id,frame_rx,subframe_rx);
-	return(-1);
+    if (do_pdcch_flag) {
+      if ((l==pilot1) ||
+	  ((pmch_flag==1)&(l==l2)))  {
+	LOG_D(PHY,"[UE  %d] Frame %d: Calling pdcch procedures (eNB %d)\n",ue->Mod_id,frame_rx,eNB_id);
+	
+	if (ue_pdcch_procedures(eNB_id,ue,proc,abstraction_flag) == -1) {
+	  LOG_E(PHY,"[UE  %d] Frame %d, subframe %d: Error in pdcch procedures\n",ue->Mod_id,frame_rx,subframe_rx);
+	  return(-1);
+	}
+	LOG_D(PHY,"num_pdcch_symbols %d\n",ue->pdcch_vars[subframe_rx & 0x1][eNB_id]->num_pdcch_symbols);
       }
-      LOG_D(PHY,"num_pdcch_symbols %d\n",ue->pdcch_vars[subframe_rx & 0x1][eNB_id]->num_pdcch_symbols);
     }
     
   } // for l=1..l2
@@ -4145,6 +4145,7 @@ int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
   start_meas(&ue->generic_stat);
   // do procedures for C-RNTI
   if (ue->dlsch[subframe_rx&0x1][eNB_id][0]->active == 1) {
+    LOG_D(PHY,"dlsch is active, doing ue_pdsch_procedures\n");
     VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_PROC, VCD_FUNCTION_IN);
     ue_pdsch_procedures(ue,
 			proc,
@@ -4460,7 +4461,7 @@ int phy_procedures_RN_UE_RX(uint8_t slot_rx, uint8_t next_slot, relaying_type_t
 #endif
  
  
-void phy_procedures_UE_lte(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,runmode_t mode,
+void phy_procedures_UE_lte(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,
 			   relaying_type_t r_type, PHY_VARS_RN *phy_vars_rn)
 {
 #if defined(ENABLE_ITTI)
@@ -4530,7 +4531,7 @@ void phy_procedures_UE_lte(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,u
        
       if (phy_procedures_RN_UE_RX(subframe_rx, subframe_tx, r_type) != 0 )
 #endif
-	phy_procedures_UE_RX(ue,proc,eNB_id,abstraction_flag,mode,r_type,phy_vars_rn);
+	phy_procedures_UE_RX(ue,proc,eNB_id,abstraction_flag,do_pdcch_flag,mode,r_type,phy_vars_rn);
     }
      
     if ((subframe_select(&ue->frame_parms,subframe_tx)==SF_S) &&
@@ -4544,7 +4545,7 @@ void phy_procedures_UE_lte(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,u
 	 
       if (phy_procedures_RN_UE_RX(subframe_rx, subframe_tx, r_type) != 0 )
 #endif
-	phy_procedures_UE_RX(ue,proc,eNB_id,abstraction_flag,mode,r_type,phy_vars_rn);
+	phy_procedures_UE_RX(ue,proc,eNB_id,abstraction_flag,do_pdcch_flag,mode,r_type,phy_vars_rn);
     }
        
     if (ue->mac_enabled==1) {

openair1/SIMULATION/LTE_PHY/dlsim.c

@@ -1391,10 +1391,12 @@ int main(int argc, char **argv)
 
   FILE *csv_fd=NULL;
   char csv_fname[32];
-  //int dci_flag=1;
+  int dci_flag=0;
   int two_thread_flag=0;
   int DLSCH_RB_ALLOC = 0;
 
+  int log_level = LOG_ERR;
+
 #if defined(__arm__)
   FILE    *proc_fd = NULL;
   char buf[64];
@@ -1418,15 +1420,13 @@ int main(int argc, char **argv)
   //signal(SIGSEGV, handler);
   //signal(SIGABRT, handler);
 
-  logInit();
-
   // default parameters
   n_frames = 1000;
   snr0 = 0;
   //  num_layers = 1;
   perfect_ce = 0;
 
-  while ((c = getopt (argc, argv, "ahdpZDe:Em:n:o:s:f:t:c:g:r:F:x:q:y:z:AM:N:I:i:O:R:S:C:T:b:u:v:w:B:Pl:WXY")) != -1) {
+  while ((c = getopt (argc, argv, "ahdpZDe:Em:n:o:s:f:t:c:g:r:F:x:q:y:z:AM:N:I:i:O:R:S:C:T:b:u:v:w:B:Pl:WXYL:")) != -1) {
     switch (c) {
     case 'a':
       awgn_flag = 1;
@@ -1453,9 +1453,9 @@ int main(int argc, char **argv)
       Nid_cell = atoi(optarg);
       break;
 
-    //case 'd':
-    //  dci_flag = 1;
-    //  break;
+    case 'd':
+      dci_flag = 1;
+      break;
 
     case 'D':
       frame_type=TDD;
@@ -1482,7 +1482,7 @@ int main(int argc, char **argv)
     case 'i':
       input_fd = fopen(optarg,"r");
       input_file=1;
-      //dci_flag = 1;
+      dci_flag = 1;
       break;
 
     case 'I':
@@ -1722,7 +1722,9 @@ int main(int argc, char **argv)
       dump_table=1;
       break;
 
-
+    case 'L':
+      log_level=atoi(optarg);
+      break;
 
     case 'h':
     default:
@@ -1732,7 +1734,7 @@ int main(int argc, char **argv)
       printf("-c Number of PDCCH symbols\n");
       printf("-m MCS1 for TB 1\n");
       printf("-M MCS2 for TB 2\n");
-      printf("-d Transmit the DCI and compute its error statistics and the overall throughput\n");
+      printf("-d Transmit the DCI and compute its error statistics\n");
       printf("-p Use extended prefix mode\n");
       printf("-n Number of frames to simulate\n");
       printf("-o Sample offset for receiver\n");
@@ -1757,6 +1759,16 @@ int main(int argc, char **argv)
     }
   }
 
+  logInit();
+  // enable these lines if you need debug info
+  set_comp_log(PHY,LOG_DEBUG,LOG_HIGH,1);
+  set_glog(log_level,LOG_HIGH);
+  // moreover you need to init itti with the following line
+  // however itti will catch all signals, so ctrl-c won't work anymore
+  // alternatively you can disable ITTI completely in CMakeLists.txt
+  //itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, NULL);
+
+
   if (common_flag == 0) {
     switch (N_RB_DL) {
     case 6:
@@ -2159,7 +2171,7 @@ int main(int argc, char **argv)
 	     TPC,
 	     mcs1,
 	     mcs2,
-	     0,
+	     1,
 	     0,
 	     &num_common_dci,
 	     &num_ue_spec_dci,
@@ -2361,11 +2373,12 @@ int main(int argc, char **argv)
 
                 eNB->dlsch[0][0]->harq_processes[0]->rvidx = round&3;
 
-		fill_DCI(eNB,&dci_alloc[0],subframe,n_rnti,n_users,transmission_mode,common_flag,DLSCH_RB_ALLOC,TPC,mcs1,mcs2,trials&1,round&3,&num_common_dci,&num_ue_spec_dci,&num_dci);
+		fill_DCI(eNB,&dci_alloc[0],subframe,n_rnti,n_users,transmission_mode,common_flag,DLSCH_RB_ALLOC,TPC,
+			 mcs1,mcs2,!(trials&1),round&3,&num_common_dci,&num_ue_spec_dci,&num_dci);
 	      }
 	      else {
 		fill_DCI(eNB,&dci_alloc[0],subframe,n_rnti,n_users,transmission_mode,common_flag,DLSCH_RB_ALLOC,TPC,
-			 (TB0_active==1)?mcs1:0,mcs2,trials&1,(TB0_active==1)?round&3:0,&num_common_dci,&num_ue_spec_dci,&num_dci);
+			 (TB0_active==1)?mcs1:0,mcs2,!(trials&1),(TB0_active==1)?round&3:0,&num_common_dci,&num_ue_spec_dci,&num_dci);
 	      }
 	      for (i=num_common_dci; i<num_dci; i++) {
 
@@ -2419,7 +2432,7 @@ int main(int argc, char **argv)
 	    proc_eNB->subframe_tx = subframe;
 	    eNB->abstraction_flag=0;
 
-	    phy_procedures_eNB_TX(eNB,proc_eNB,no_relay,NULL,1);
+	    phy_procedures_eNB_TX(eNB,proc_eNB,no_relay,NULL,1,dci_flag);
 
 
 	    start_meas(&eNB->ofdm_mod_stats);
@@ -2455,7 +2468,7 @@ int main(int argc, char **argv)
 
 	    proc_eNB->subframe_tx = subframe+1;
 
-	    phy_procedures_eNB_TX(eNB,proc_eNB,no_relay,NULL,0);
+	    phy_procedures_eNB_TX(eNB,proc_eNB,no_relay,NULL,0,dci_flag);
 
 	    do_OFDM_mod_l(eNB->common_vars.txdataF[eNB_id],
 			  eNB->common_vars.txdata[eNB_id],
@@ -2506,7 +2519,38 @@ int main(int argc, char **argv)
 		   0);
 
 	  if (n_frames==1) printf("Running phy_procedures_UE_RX\n");
-	  phy_procedures_UE_RX(UE,proc,0,0,normal_txrx,no_relay,NULL);
+
+	  if (dci_flag==0) {
+	    if (n_frames==1)
+	      printf("bypassing PDCCH/DCI detection\n");
+	    if  (generate_ue_dlsch_params_from_dci(proc->frame_rx,
+						   proc->subframe_rx,
+						   (void *)&dci_alloc[0].dci_pdu,
+						   n_rnti,
+						   dci_alloc[0].format,
+						   UE->dlsch[proc->subframe_rx&0x1][eNB_id],
+						   &UE->frame_parms,
+						   UE->pdsch_config_dedicated,
+						   SI_RNTI,
+						   0,
+						   P_RNTI,
+						   UE->transmission_mode[eNB_id]<7?0:UE->transmission_mode[eNB_id],
+						   0)==0) {
+
+		dump_dci(&UE->frame_parms, &dci_alloc[0]);
+
+		//UE->dlsch[proc->subframe_rx&0x1][eNB_id][0]->active = 1;
+		//UE->dlsch[proc->subframe_rx&0x1][eNB_id][1]->active = 1;
+
+		UE->pdcch_vars[proc->subframe_rx&0x1][eNB_id]->num_pdcch_symbols = num_pdcch_symbols;
+
+		UE->dlsch_received[eNB_id]++;
+	    } else {
+	      LOG_E(PHY,"Problem in DCI!\n");
+	    }
+	  }
+
+	  phy_procedures_UE_RX(UE,proc,0,0,dci_flag,normal_txrx,no_relay,NULL);
 
 	  if (UE->dlsch[subframe&0x1][0][0]->active == 0) {
 	    //printf("DCI not received\n");

openair1/SIMULATION/LTE_PHY/pucchsim.c

@@ -297,7 +297,7 @@ int main(int argc, char **argv)
   }
 
   logInit();
-  itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, NULL);
+  //itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, NULL);
   g_log->log_component[PHY].level = LOG_DEBUG;
   g_log->log_component[PHY].flag = LOG_HIGH;
 

targets/RT/USER/lte-enb.c

@@ -450,7 +450,7 @@ void proc_tx_high0(PHY_VARS_eNB *eNB,
   VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_ENB+offset, proc->frame_tx );
   VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX0_ENB+offset, proc->subframe_tx );
 
-  phy_procedures_eNB_TX(eNB,proc,r_type,rn,1);
+  phy_procedures_eNB_TX(eNB,proc,r_type,rn,1,1);
 
   /* we're done, let the next one proceed */
   if (pthread_mutex_lock(&sync_phy_proc.mutex_phy_proc_tx) != 0) {

targets/RT/USER/lte-ue.c

@@ -543,7 +543,7 @@ static void *UE_thread_rxn_txnp4(void *arg) {
                        (sf_type==SF_UL? "SF_UL" :
                         (sf_type==SF_S ? "SF_S"  : "UNKNOWN_SF_TYPE"))));
             }
-            phy_procedures_UE_RX( UE, proc, 0, 0, UE->mode, no_relay, NULL );
+            phy_procedures_UE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
         }
 
         start_meas(&UE->generic_stat);