Skip to content

O
OpenXG-RAN
Commit ca91b8da authored by hardy's avatar hardy
Browse files
Options

qMerge branch 'rh_doc_update_3' of... 

qMerge branch 'rh_doc_update_3' of https://gitlab.eurecom.fr/oai/openairinterface5g into rh_doc_update_3
parents f79f6351 03d9bca1
Hide whitespace changes
Inline Side-by-side
Showing with 144 additions and 43 deletions
doc/TESTING_GNB_W_COTS_UE.md
View file @ ca91b8da
DISCLAIMER : This page is under complete review and update, thanks for your patience
## Configuration Overview:
* Non Standalone (NSA) configuration : initial Control Plane established between UE and RAN eNB, then User Plane established between UE and gNB, Core network is 4G based supporting rel 15
......@@ -5,7 +7,7 @@
* Commercial UE: Oppo Reno 5G
* OAI Software Defined gNB and eNB
* eNB RF front end: USRP (ETTUS) B200 Mini or B210
* gNB RF front end: USRP (ETTUS) B200 Mini or B210 (N300 will be needed for MIMO and wider BW's)
* gNB RF front end: USRP (ETTUS) B200 Mini or B210 (N310 will be needed for MIMO and wider BW's)
* 5G TDD duplexing mode
* 5G FR1 Band n78 (3.5 GHz)
* BW: 40MHz
......@@ -17,7 +19,7 @@ https://gitlab.eurecom.fr/oai/openairinterface5g/tree/develop
## Architecture Setup
photos and schemes
The scheme below depicts our typical setup:
![image info](./testing_gnb_w_cots_ue_resources/oai_fr1_setup.jpg)
......@@ -32,91 +34,190 @@ See https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/doc/BUILD.md#b
for reference:
https://github.com/OPENAIRINTERFACE/openair-epc-fed/blob/master-documentation/docs/DEPLOY_HOME.md
```
sudo bash
cd /opt/hss_sim0609
./starthss_real
```
- **eNB**
```
sudo bash
cd /opt/hss_sim0609
./starthss_real
sudo
```
- **gNB**
```
sudo bash
cd /opt/hss_sim0609
./starthss_real
sudo
```
## Conf Files
## Configuration Files
where are they
usage
Each component (EPC, eNB, gNB) has its own configuration file.
These config files are passed as arguments of the run command line, using the option -O \<conf file\>
## Run / Test
Some config examples can be found in the following folder:
https://gitlab.eurecom.fr/oai/openairinterface5g/-/tree/develop/targets/PROJECTS/GENERIC-LTE-EPC/CONF
These files have to be updated manually to set the IP addresses and frequency.
- **EPC** (on EPC host):
1- In the **eNB configuration file** :
- look for MME IP address, and update the **ipv4 field** with the IP address of the **EPC** server
```
////////// MME parameters:
mme_ip_address = ( { ipv4 = "**YOUR_EPC_IP_ADDR**";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
```
sudo bash
cd /opt/hss_sim0609
./starthss_real
- look for S1 IP address, and update the **3 fields below** with the IP address of the **eNB** server
```
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "**YOUR_ENB_IP_ADDR**";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "**YOUR_ENB_IP_ADDR**";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "**YOUR_ENB_IP_ADDR**";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
Open another window and:
```
2- In the **gNB configuration file** :
- look for MME IP address, and update the **ipv4 field** with the IP address of the **EPC** server
```
sudo bash
cd /opt/ltebox/tools
./stop_ltebox
./start_ltebox
////////// MME parameters:
mme_ip_address = ( { ipv4 = "**YOUR_EPC_IP_ADDR**";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
```
- look for X2 IP address, and update the **4 fields** with the IP address of the **eNB** server (notice : even if -in principle- S1 MME is not required for gNB setting)
```
Note: when terminated the testing session, you shall stop the EPC by "./stop_ltebox"
///X2
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "**YOUR_ENB_IP_ADDR**";
ipv6 = "192:168:30::17";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "**YOUR_ENB_IP_ADDR**";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "**YOUR_ENB_IP_ADDR**";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "**YOUR_ENB_IP_ADDR**";
GNB_PORT_FOR_X2C = 36422; # Spec 36422
};
```
- **eNB** (on the eNB host):
~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./lte-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf (-E)
3- The frequency setting requires a manual update in the .C and in the gNB conf file:
In the C file **openair2/RRC/LTE/rrc_eNB.c:3217**
set the nrarfcn to the same value as absoluteFrequencySSB in the **gNB config file**, that is **641272** in the example below
C file :
```
MeasObj2->measObject.choice.measObjectNR_r15.carrierFreq_r15 =641272;
```
gNB config file :
```
# absoluteFrequencySSB is the central frequency of SSB
absoluteFrequencySSB = 641272;
dl_frequencyBand = 78;
# the carrier frequency is assumed to be in the middle of the carrier, i.e. dl_absoluteFrequencyPointA_kHz + dl_carrierBandwidth*12*SCS_kHz/2
dl_absoluteFrequencyPointA = 640000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
```
eNB is using branch NR_RRCConfiguration patched with enb.diff
## Run / Test
- **EPC** (on EPC host):
for reference:
https://github.com/OPENAIRINTERFACE/openair-epc-fed/blob/master-documentation/docs/DEPLOY_HOME.md
- **eNB** (on the eNB host):
```
~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./lte-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf (-E)
```
- **gNB** (on the gNB host)
```
~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf (-E)
Note: gNB is using branch NR_RRC_PRACH_procedures patched with gnb.diff
```
## Test Case
Test case description
Test case description : UE attachement
## Expected Logs to check
what and where to check
what logs and where to check, to ensure that your setup works fine (or not ...)
## Required traces for debug
What info/traces/logs are needed for us to support the debug
## Status of the interoperability
- setup of the CP in 4G
- setup of the measurements in 5G
- Random access procedure initiation by the UE in the 5G cell
- msg1, msg2, msg3 correctly exchanged and decoded
The following parts have been validated with FR1 COTS UE:
- Phone accepts the configurtion provided by OAI eNB:
this validates RRC and X2AP
- Successful Random Access Procedure:
PRACH is correctly decoded at gNB
Phone correctly receives and decodes msg2 (NR PDCCH Format 1_0 and NR PDSCH)
msg3 is transmitted to gNB according to the configuration sent in msg2, and received correctly at gNB
- Successful path switch of user plane traffic from 4G to 5G cell (E-RAB modification message):
this validates S1AP
- Downlink traffic:
PDCCH DCI format 1_1 and correponding PDSCH are decoded correctlyby the phone
ACK/NACK (PUCCH format 0) are successfully received at gNB
- On going:
validation of HARQ procedures
Integration with higher layers to replace dummy data with real traffic
- Known limitations as of May 2020:
only dummy DL traffic
no UL traffic
no end-to-end traffic possible
[enb.conf](uploads/48bbbcc8016a33ce6d2faf62e3845005/enb.conf)
[enb.diff](uploads/9763bd6d18256612d007251bc371ca46/enb.diff)
[gnb.conf](uploads/59ae03deccb2186f544451034c297838/gnb.conf)
[gnb.diff](uploads/bb756b2b165cb70f89405d7a8c4c36a8/gnb.diff)
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment