Commit df689a42 authored by Dhanuja Elizabeth Thomas's avatar Dhanuja Elizabeth Thomas Committed by Robert Schmidt

Updates for 5g_l2sim_tdd:

1. Docker compose yaml
2. UE config : nrue.band78.106prb.l2sim.conf
3. gNB config: gnb.band78.106prb.l2sim.conf
parent 94f7313d
Active_gNBs = ( "gnb-l2sim-vnf");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gnb-l2sim-vnf";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
nr_cellid = 12345678L;
////////// Physical parameters:
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641280;
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640008;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=27,L=48 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 12952; # 6366 12925 12956 28875 12952
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 12952;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ( { ipv4 = "192.168.71.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "eno1";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.16.128";
GNB_INTERFACE_NAME_FOR_NGU = "eno1";
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.16.128";
GNB_PORT_FOR_NGU = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
local_s_if_name = "lo:";
remote_s_address = "127.0.0.1"; // pnf addr [!]
local_s_address = "127.0.0.2"; // vnf addr
local_s_portc = 50601; // vnf p5 port
remote_s_portc = 50600; // pnf p5 port [!]
local_s_portd = 50611; // vnf p7 port [!]
remote_s_portd = 50610; // pnf p7 port [!]
tr_s_preference = "nfapi";
tr_n_preference = "local_RRC";
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
};
log_config = {
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
};
uicc0 = {
imsi = "208990100001100";
key = "fec86ba6eb707ed08905757b1bb44b8f";
opc= "C42449363BBAD02B66D16BC975D77CC1";
dnn= "oai";
nssai_sst=1;
nssai_sd=16777215;
}
MACRLCs = (
{
num_cc = 1;
tr_n_preference = "nfapi";
local_n_if_name = "eno1";
remote_n_address = "127.0.0.1"; //Proxy IP
local_n_address = "127.0.0.1";
local_n_portc = 50600;
remote_n_portc = 50601;
local_n_portd = 50610;
remote_n_portd = 50611;
}
);
......@@ -169,25 +169,13 @@ services:
network_mode: "host"
environment:
TZ: Europe/Paris
USE_SA_NFAPI_VNF: 'yes'
GNB_NAME: gnb-l2sim-vnf
TAC: 1
MCC: '208'
MNC: '99'
MNC_LENGTH: 2
NSSAI_SST: 1
AMF_IP_ADDRESS: 192.168.71.132
GNB_NGA_IF_NAME: eno1
GNB_NGA_IP_ADDRESS: 172.21.16.128
GNB_NGU_IF_NAME: eno1
GNB_NGU_IP_ADDRESS: 172.21.16.128
LOCAL_S_IF_NAME: 'lo:'
REMOTE_S_ADDRESS: 127.0.0.1
LOCAL_S_ADDRESS: 127.0.0.2
USE_VOLUMED_CONF: 'yes'
USE_ADDITIONAL_OPTIONS: --sa --nfapi VNF --emulate-l1 --log_config.global_log_options level,time,thread_id,nocolor
depends_on:
- oai-spgwu
- oai-amf
volumes:
- ../../conf_files/gnb.band78.106prb.l2sim.conf:/opt/oai-gnb/etc/mounted.conf
healthcheck:
test: /bin/bash -c "pgrep nr-softmodem"
interval: 10s
......@@ -217,19 +205,11 @@ services:
network_mode: "host"
environment:
TZ: Europe/Paris
USE_NFAPI: 'yes'
USE_VOLUMED_CONF: 'yes'
OPENAIR_DIR: /opt/oai-nr-ue
FULL_IMSI: '208990100001100'
FULL_KEY: 'fec86ba6eb707ed08905757b1bb44b8f'
OPC: 'C42449363BBAD02B66D16BC975D77CC1'
DNN: oai
NSSAI_SST: 1
NSSAI_SD: 0xffffff
NR_UE_NFAPI_IF_NAME: eno1
GNB_IP_ADDRESS: 127.0.0.1
NR_UE_IP_ADDRESS: 127.0.0.1
USE_ADDITIONAL_OPTIONS: --nfapi STANDALONE_PNF --node-number 2 --sa --emulate-l1 --log_config.global_log_options level,time,thread_id,nocolor
volumes:
- ../../conf_files/nrue.band78.106prb.l2sim.conf:/opt/oai-nr-ue/etc/mounted.conf
- ../../../openair1/SIMULATION/LTE_PHY/BLER_SIMULATIONS/AWGN/AWGN_results:/opt/oai-nr-ue/openair1/SIMULATION/LTE_PHY/BLER_SIMULATIONS/AWGN/AWGN_results
depends_on:
- oai-gnb
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment