Merge branch 'integration_2021_w32' into 'develop'

Integration Branch : 2021 week 32

See merge request oai/openairinterface5g!1224

The following Merge Requests have been included:

* MR [1198] : 5G UE UCI procedurers at MAC
* MR [1207] : Code-cleanup-20210716
* MR [1215] : NR UL antenna ports cleanup
* MR [1220] : Temporary fix for CORESET configuration in SIB1
* MR [1221] : Container: adding conf template to gNB container image

ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf

@@ -6,10 +6,8 @@ eNBs =
 (
  {
     ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
+    eNB_ID    =  0xe01;
     cell_type =  "CELL_MACRO_ENB";
-
     eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
@@ -128,24 +126,25 @@ eNBs =
       rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
 */
       // Parameters for SIB19
-      discRxPool_cp_Len                                      = "normal"
-      discRxPool_discPeriod                                  = "rf32"
-      discRxPool_numRetx                                     = 1;
-      discRxPool_numRepetition                               = 2;
-      discRxPool_ResourceConfig_prb_Num                      = 5;
-      discRxPool_ResourceConfig_prb_Start                    = 3;
-      discRxPool_ResourceConfig_prb_End                      = 21;
-      discRxPool_ResourceConfig_offsetIndicator_present      = "prSmall";
-      discRxPool_ResourceConfig_offsetIndicator_choice       = 0;
-      discRxPool_ResourceConfig_subframeBitmap_present       = "prBs40";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "f0ffffffff";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size= 5;
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
       discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
 
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
       }
     );
 
-
     srb1_parameters :
     {
         # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
@@ -175,6 +174,7 @@ eNBs =
         SCTP_OUTSTREAMS = 2;
     };
 
+    enable_measurement_reports = "no";
 
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
@@ -185,10 +185,8 @@ eNBs =
                             }
                           );
 
-    enable_measurement_reports = "no";
-
     ///X2
-    enable_x2 = "no";
+    enable_x2         = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
     t_dc_prep         = 1000;      /* unit: millisecond */

ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf

@@ -8,7 +8,6 @@ gNBs =
  {
     ////////// Identification parameters:
     gNB_ID    =  0xe00;
-
     cell_type =  "CELL_MACRO_GNB";
     gNB_name  =  "gNB-Eurecom-5GNRBox";
 
@@ -185,102 +184,101 @@ gNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              port       = 36412 ;
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
+#    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+#                              ipv6       = "192:168:30::17";
+#                              port       = 36412 ;
+#                              active     = "yes";
+#                              preference = "ipv4";
+#                            }
+#                          );
 
     ///X2
-    enable_x2 = "yes";
+    enable_x2         = "yes";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
     t_dc_prep         = 1000;      /* unit: millisecond */
     t_dc_overall      = 2000;      /* unit: millisecond */
-    target_enb_x2_ip_address      = (
-                                     { ipv4       = "CI_FR1_CTL_ENB_IP_ADDR";
-                                       ipv6       = "192:168:30::17";
-                                       preference = "ipv4";
-                                     }
-                                    );
+
+    target_enb_x2_ip_address = ( { ipv4       = "CI_FR1_CTL_ENB_IP_ADDR";
+                                   ipv6       = "192:168:30::17";
+                                   preference = "ipv4";
+                                 }
+                               );
 
     NETWORK_INTERFACES :
     {
-
-        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        GNB_IPV4_ADDRESS_FOR_S1_MME              = "CI_GNB_IP_ADDR";
-        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        GNB_IPV4_ADDRESS_FOR_S1U                 = "CI_GNB_IP_ADDR";
-        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        GNB_IPV4_ADDRESS_FOR_X2C                 = "CI_GNB_IP_ADDR";
-        GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
+      GNB_INTERFACE_NAME_FOR_S1_MME  = "eth0";
+      GNB_IPV4_ADDRESS_FOR_S1_MME    = "CI_GNB_IP_ADDR";
+      GNB_INTERFACE_NAME_FOR_S1U     = "eth0";
+      GNB_IPV4_ADDRESS_FOR_S1U       = "CI_GNB_IP_ADDR";
+      GNB_PORT_FOR_S1U               = 2152; # Spec 2152
+      GNB_IPV4_ADDRESS_FOR_X2C       = "CI_GNB_IP_ADDR";
+      GNB_PORT_FOR_X2C               = 36422; # Spec 36422
     };
+
   }
 );
 
 MACRLCs = (
-    {
-        num_cc              = 1;
-        tr_s_preference     = "local_L1";
-        tr_n_preference     = "local_RRC";
-        pusch_TargetSNRx10  = 200;
-        pucch_TargetSNRx10  = 200;
-    }
+  {
+    num_cc              = 1;
+    tr_s_preference     = "local_L1";
+    tr_n_preference     = "local_RRC";
+    pusch_TargetSNRx10  = 200;
+    pucch_TargetSNRx10  = 200;
+  }
 );
 
 L1s = (
-      {
-  num_cc = 1;
-  tr_n_preference = "local_mac";
-  pusch_proc_threads = 6;
-        }  
+  {
+    num_cc             = 1;
+    tr_n_preference    = "local_mac";
+    pusch_proc_threads = 6;
+  }
 );
 
 RUs = (
-    {      
-       local_rf       = "yes"
-         nb_tx          = 1
-         nb_rx          = 1
-         att_tx         = 3
-         att_rx         = 0;
-         bands          = [7];
-         max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 111;
-         eNB_instances  = [0];
-#         clock_src = "external";
-    }
+  {
+    local_rf       = "yes"
+    nb_tx          = 1
+    nb_rx          = 1
+    att_tx         = 3
+    att_rx         = 0;
+    bands          = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain     = 111;
+    eNB_instances  = [0];
+#    clock_src      = "external";
+  }
 );  
 
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
     parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
-    //parallel_config    = "PARALLEL_SINGLE_THREAD";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }
 );
 
-     log_config :
-     {
-       global_log_level                      ="info";
-       global_log_verbosity                  ="medium";
-       hw_log_level                          ="info";
-       hw_log_verbosity                      ="medium";
-       phy_log_level                         ="info";
-       phy_log_verbosity                     ="medium";
-       mac_log_level                         ="info";
-       mac_log_verbosity                     ="high";
-       rlc_log_level                         ="info";
-       rlc_log_verbosity                     ="medium";
-       pdcp_log_level                        ="info";
-       pdcp_log_verbosity                    ="medium";
-       rrc_log_level                         ="info";
-       rrc_log_verbosity                     ="medium";
-    };
+log_config :
+{
+  global_log_level      ="info";
+  global_log_verbosity  ="medium";
+  hw_log_level          ="info";
+  hw_log_verbosity      ="medium";
+  phy_log_level         ="info";
+  phy_log_verbosity     ="medium";
+  mac_log_level         ="info";
+  mac_log_verbosity     ="high";
+  rlc_log_level         ="info";
+  rlc_log_verbosity     ="medium";
+  pdcp_log_level        ="info";
+  pdcp_log_verbosity    ="medium";
+  rrc_log_level         ="info";
+  rrc_log_verbosity     ="medium";
+};
 
 uicc: {
-opc = "testopc";
+  opc = "testopc";
 };

ci-scripts/conf_files/nr-ue-sim.conf

+uicc0 = {
+  imsi = "@FULL_IMSI@";
+  key = "@FULL_KEY@";
+  opc= "@OPC@";
+  dnn= "@DNN@";
+  nssai_sst=@NSSAI_SST@;
+  nssai_sd=@NSSAI_SD@;
+}

ci-scripts/html.py

@@ -182,9 +182,12 @@ class HTMLManagement():
 				self.htmlFile.write('     </tr>\n')
 			self.htmlFile.write('  </table>\n')
 
-			if (ADBIPAddress != 'none'):
+			if (ADBIPAddress != 'none') and (ADBIPAddress != 'modules'):
 				self.htmlFile.write('  <h2><span class="glyphicon glyphicon-phone"></span> <span class="glyphicon glyphicon-menu-right"></span> ' + str(self.htmlNb_Smartphones) + ' UE(s) is(are) connected to ADB bench server</h2>\n')
 				self.htmlFile.write('  <h2><span class="glyphicon glyphicon-phone"></span> <span class="glyphicon glyphicon-menu-right"></span> ' + str(self.htmlNb_CATM_Modules) + ' CAT-M UE(s) is(are) connected to bench server</h2>\n')
+			elif (ADBIPAddress == 'modules'):
+				self.htmlUEConnected = 1
+				self.htmlFile.write('  <h2><span class="glyphicon glyphicon-phone"></span> <span class="glyphicon glyphicon-menu-right"></span> 1 commercial module is connected to CI bench</h2>\n')
 			else:
 				self.htmlUEConnected = 1
 				self.htmlFile.write('  <h2><span class="glyphicon glyphicon-phone"></span> <span class="glyphicon glyphicon-menu-right"></span> 1 OAI UE(s) is(are) connected to CI bench</h2>\n')

ci-scripts/main.py

@@ -573,7 +573,7 @@ elif re.match('^InitiateHtml$', mode, re.IGNORECASE):
 	if foundCount != HTML.nbTestXMLfiles:
 		HTML.nbTestXMLfiles=foundCount
 	
-	if (CiTestObj.ADBIPAddress != 'none'):
+	if (CiTestObj.ADBIPAddress != 'none') and (CiTestObj.ADBIPAddress != 'modules'):
 		terminate_ue_flag = False
 		CiTestObj.GetAllUEDevices(terminate_ue_flag)
 		CiTestObj.GetAllCatMDevices(terminate_ue_flag)
@@ -677,10 +677,12 @@ elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re
 
 	signal.signal(signal.SIGUSR1, receive_signal)
 
-	if (CiTestObj.ADBIPAddress != 'none'):
+	if (CiTestObj.ADBIPAddress != 'none') and (CiTestObj.ADBIPAddress != 'modules'):
 		terminate_ue_flag = False
 		CiTestObj.GetAllUEDevices(terminate_ue_flag)
 		CiTestObj.GetAllCatMDevices(terminate_ue_flag)
+	elif (CiTestObj.ADBIPAddress == 'modules'):
+		CiTestObj.UEDevices.append('COTS-Module')
 	else:
 		CiTestObj.UEDevices.append('OAI-UE')
 	HTML.SethtmlUEConnected(len(CiTestObj.UEDevices) + len(CiTestObj.CatMDevices))
@@ -714,7 +716,7 @@ elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re
 				CiTestObj.ShowTestID()
 				GetParametersFromXML(action)
 				if action == 'Initialize_UE' or action == 'Attach_UE' or action == 'Detach_UE' or action == 'Ping' or action == 'Iperf' or action == 'Reboot_UE' or action == 'DataDisable_UE' or action == 'DataEnable_UE' or action == 'CheckStatusUE':
-					if (CiTestObj.ADBIPAddress != 'none'):
+					if (CiTestObj.ADBIPAddress != 'none') and (CiTestObj.ADBIPAddress != 'modules'):
 						#in these cases, having no devices is critical, GetAllUEDevices function has to manage it as a critical error, reason why terminate_ue_flag is set to True
 						terminate_ue_flag = True 
 						# Now we stop properly the test-suite --> clean reporting
@@ -799,7 +801,8 @@ elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re
 					CiTestObj.Perform_X2_Handover(HTML,RAN,EPC)
 				elif action == 'Build_PhySim':
 					HTML=ldpc.Build_PhySim(HTML,CONST)
-					if ldpc.exitStatus==1:sys.exit()
+					if ldpc.exitStatus==1:
+						RAN.prematureExit = False
 				elif action == 'Run_PhySim':
 					HTML=ldpc.Run_PhySim(HTML,CONST,id)
 				elif action == 'Build_Image':

ci-scripts/yaml_files/4g_rfsimulator/docker-compose.yml

@@ -32,7 +32,7 @@ services:
         entrypoint: /bin/bash -c "cqlsh --file /home/oai_db.cql 192.168.68.2 && echo 'OK'"
 
     oai_hss:
-        image: oai-hss:develop-2021-06-14
+        image: oai-hss:latest
         container_name: rfsim4g-oai-hss
         privileged: true
         depends_on: [cassandra]
@@ -59,7 +59,7 @@ services:
             retries: 5
 
     oai_mme:
-        image: oai-mme:production
+        image: oai-mme:latest
         container_name: rfsim4g-oai-mme
         privileged: true
         depends_on: [oai_hss]
@@ -116,7 +116,7 @@ services:
             retries: 5
 
     oai_spgwc:
-        image: oai-spgwc:develop-2021-06-14
+        image: oai-spgwc:latest
         privileged: true
         depends_on: [oai_mme]
         container_name: rfsim4g-oai-spgwc
@@ -148,7 +148,7 @@ services:
             retries: 5
 
     oai_spgwu:
-        image: oai-spgwu-tiny:develop-2021-06-14
+        image: oai-spgwu-tiny:latest
         privileged: true
         container_name: rfsim4g-oai-spgwu-tiny
         depends_on: [oai_spgwc]
@@ -177,19 +177,6 @@ services:
             timeout: 5s
             retries: 5
 
-    flexran_rtc:
-        image: flexran-rtc:production
-        privileged: true
-        container_name: rfsim4g-flexran-rtc
-        networks:
-            public_net:
-                ipv4_address: 192.168.61.10
-        healthcheck:
-            test: /bin/bash -c "pgrep rt_controller"
-            interval: 10s
-            timeout: 5s
-            retries: 5
-
     trf_gen:
         image: trf-gen:production
         privileged: true
@@ -235,6 +222,11 @@ services:
             FLEXRAN_INTERFACE_NAME: eth0
             FLEXRAN_IPV4_ADDRESS: 192.168.61.10
             USE_ADDITIONAL_OPTIONS: --rfsim
+        healthcheck:
+            test: /bin/bash -c "pgrep lte-softmodem"
+            interval: 10s
+            timeout: 5s
+            retries: 5
 
     oai_ue0:
         image: oai-lte-ue:develop
@@ -257,6 +249,11 @@ services:
             MSISDN: '001011234561010'
             HPLMN: 20896
             USE_ADDITIONAL_OPTIONS: --rfsim -C 2680000000 -r 25 --ue-rxgain 140 --ue-txgain 120 --nokrnmod 1
+        healthcheck:
+            test: /bin/bash -c "pgrep lte-uesoftmodem"
+            interval: 10s
+            timeout: 5s
+            retries: 5
 
 networks:
     private_net:
@@ -264,9 +261,12 @@ networks:
         ipam:
             config:
                 - subnet: 192.168.68.0/26
+        driver_opts:
+            com.docker.network.bridge.name: "rfsim4g-private"
     public_net:
         name: rfsim4g-oai-public-net
         ipam:
             config:
                 - subnet: 192.168.61.0/26
-
+        driver_opts:
+            com.docker.network.bridge.name: "rfsim4g-public"

ci-scripts/yaml_files/5g_rfsimulator/amf-healthcheck.sh

+#!/bin/bash
+set -eo pipefail
+
+STATUS=0
+AMF_PORT_FOR_NGAP=38412
+AMF_PORT_FOR_N11_HTTP=80
+AMF_IP_NGAP_INTERFACE=$(ifconfig $AMF_INTERFACE_NAME_FOR_NGAP | grep inet | awk {'print $2'})
+AMF_IP_N11_INTERFACE=$(ifconfig $AMF_INTERFACE_NAME_FOR_N11 | grep inet | awk {'print $2'})
+N2_PORT_STATUS=$(netstat -Snpl | grep -o "$AMF_IP_NGAP_INTERFACE:$AMF_PORT_FOR_NGAP")
+N11_PORT_STATUS=$(netstat -tnpl | grep -o "$AMF_IP_N11_INTERFACE:$AMF_PORT_FOR_N11_HTTP")
+#Check if entrypoint properly configured the conf file and no parameter is unset (optional)
+NB_UNREPLACED_AT=`cat /openair-amf/etc/*.conf | grep -v contact@openairinterface.org | grep -c @ || true`
+
+if [ $NB_UNREPLACED_AT -ne 0 ]; then
+	STATUS=1
+	echo "Healthcheck error: configuration file is not configured properly"
+fi
+
+if [[ -z $N2_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: N2 SCTP port $AMF_PORT_FOR_NGAP is not listening"
+fi
+
+if [[ -z $N11_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: N11/SBI TCP/HTTP port $AMF_PORT_FOR_N11_HTTP is not listening"
+fi
+
+#host="${MYSQL_SERVER}"
+#user="${MYSQL_USER:-root}"
+#export MYSQL_PWD="${MYSQL_PASS}"
+
+#args=(
+#	-h"$host"
+#	-u"$user"
+#	--silent
+#)
+
+#if ! command -v mysql &> /dev/null; then
+#	echo "Installing mysql command"
+#	apt update
+#	apt-get -y install mysql-client
+#else
+#	if select="$(echo 'SELECT 1' | mysql "${args[@]}")" && [ "$select" = '1' ]; then
+#		database_check=$(mysql -h$host -u$user -D oai_db --silent -e "SELECT * FROM users;")
+#		if [[ -z $database_check ]]; then
+#			echo "Healthcheck error: oai_db not populated"
+#			STATUS=1
+#		fi
+#		STATUS=0
+#	else
+#		echo "Healthcheck error: Mysql port inactive"
+#		STATUS=1
+#	fi
+#fi
+
+exit $STATUS

ci-scripts/yaml_files/5g_rfsimulator/docker-compose.yaml

+version: '3.8'
+services:
+    oai-nrf:
+        container_name: "rfsim5g-oai-nrf"
+        image: oai-nrf:latest
+        environment:
+            - NRF_INTERFACE_NAME_FOR_SBI=eth0
+            - NRF_INTERFACE_PORT_FOR_SBI=80
+            - NRF_INTERFACE_HTTP2_PORT_FOR_SBI=9090
+            - NRF_API_VERSION=v1
+            - INSTANCE=0
+            - PID_DIRECTORY=/var/run
+        networks:
+            public_net:
+                ipv4_address: 192.168.71.130
+        volumes:
+            - ./nrf-healthcheck.sh:/openair-nrf/bin/nrf-healthcheck.sh
+        healthcheck:
+            test: /bin/bash -c "/openair-nrf/bin/nrf-healthcheck.sh"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+    mysql:
+        container_name: "rfsim5g-mysql"
+        image: mysql:5.7
+        volumes:
+            - ./oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
+            - ./mysql-healthcheck.sh:/tmp/mysql-healthcheck.sh
+        environment:
+            - TZ=Europe/Paris
+            - MYSQL_DATABASE=oai_db
+            - MYSQL_USER=test
+            - MYSQL_PASSWORD=test
+            - MYSQL_ROOT_PASSWORD=linux
+        healthcheck:
+            test: /bin/bash -c "/tmp/mysql-healthcheck.sh"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+        networks:
+            public_net:
+                ipv4_address: 192.168.71.131
+    oai-amf:
+        container_name: "rfsim5g-oai-amf"
+        image: oai-amf:latest
+        environment:
+            - TZ=Europe/paris
+            - INSTANCE=0
+            - PID_DIRECTORY=/var/run
+            - MCC=208
+            - MNC=99
+            - REGION_ID=128
+            - AMF_SET_ID=1
+            - SERVED_GUAMI_MCC_0=208
+            - SERVED_GUAMI_MNC_0=99
+            - SERVED_GUAMI_REGION_ID_0=128
+            - SERVED_GUAMI_AMF_SET_ID_0=1
+            - SERVED_GUAMI_MCC_1=460
+            - SERVED_GUAMI_MNC_1=11
+            - SERVED_GUAMI_REGION_ID_1=10
+            - SERVED_GUAMI_AMF_SET_ID_1=1
+            - PLMN_SUPPORT_MCC=208
+            - PLMN_SUPPORT_MNC=99
+            - PLMN_SUPPORT_TAC=0x0001
+            - SST_0=1
+            - SD_0=1
+            - SST_1=1
+            - SD_1=12
+            - AMF_INTERFACE_NAME_FOR_NGAP=eth0
+            - AMF_INTERFACE_NAME_FOR_N11=eth0
+            - SMF_INSTANCE_ID_0=1
+            - SMF_FQDN_0=oai-smf
+            - SMF_IPV4_ADDR_0=0.0.0.0
+            - SMF_HTTP_VERSION_0=v1
+            - SELECTED_0=true
+            - SMF_INSTANCE_ID_1=2
+            - SMF_FQDN_1=oai-smf
+            - SMF_IPV4_ADDR_1=0.0.0.0
+            - SMF_HTTP_VERSION_1=v1
+            - SELECTED_1=false
+            - MYSQL_SERVER=192.168.71.131
+            - MYSQL_USER=root
+            - MYSQL_PASS=linux
+            - MYSQL_DB=oai_db
+            - OPERATOR_KEY=c42449363bbad02b66d16bc975d77cc1
+            - NRF_IPV4_ADDRESS=192.168.71.130
+            - NRF_PORT=80
+            - NF_REGISTRATION=yes
+            - SMF_SELECTION=yes
+            - USE_FQDN_DNS=yes
+            - NRF_API_VERSION=v1
+            - NRF_FQDN=oai-nrf
+            - AUSF_IPV4_ADDRESS=127.0.0.1
+            - AUSF_PORT=80
+            - AUSF_API_VERSION=v1
+        depends_on:
+            - oai-nrf
+        volumes:
+            - ./amf-healthcheck.sh:/openair-amf/bin/amf-healthcheck.sh
+        healthcheck:
+            test: /bin/bash -c "/openair-amf/bin/amf-healthcheck.sh"
+            interval: 10s
+            timeout: 15s
+            retries: 5
+        networks:
+            public_net:
+                ipv4_address: 192.168.71.132
+    oai-smf:
+        container_name: "rfsim5g-oai-smf"
+        image: oai-smf:latest
+        entrypoint: /bin/bash -c "/openair-smf/bin/oai_smf -c /openair-smf/bin/oai-smf.conf -o"
+        environment:
+            - TZ=Europe/Paris
+            - INSTANCE=0
+            - PID_DIRECTORY=/var/run
+            - SMF_INTERFACE_NAME_FOR_N4=eth0
+            - SMF_INTERFACE_NAME_FOR_SBI=eth0
+            - SMF_INTERFACE_PORT_FOR_SBI=80
+            - SMF_INTERFACE_HTTP2_PORT_FOR_SBI=9090
+            - SMF_API_VERSION=v1
+            - DEFAULT_DNS_IPV4_ADDRESS=192.168.18.129
+            - DEFAULT_DNS_SEC_IPV4_ADDRESS=4.4.4.4
+            - AMF_IPV4_ADDRESS=0.0.0.0
+            - AMF_PORT=80
+            - AMF_API_VERSION=v1
+            - AMF_FQDN=oai-amf
+            - UDM_IPV4_ADDRESS=127.0.0.1
+            - UDM_PORT=80
+            - UDM_API_VERSION=v1
+            - UDM_FQDN=localhost
+            - UPF_IPV4_ADDRESS=192.168.71.134
+            - UPF_FQDN_0=oai-spgwu
+            - NRF_IPV4_ADDRESS=192.168.71.130
+            - NRF_PORT=80
+            - NRF_API_VERSION=v1
+            - NRF_FQDN=oai-nrf
+            - REGISTER_NRF=yes
+            - DISCOVER_UPF=yes
+            - USE_FQDN_DNS=yes
+        depends_on:
+            - oai-nrf
+        volumes:
+            - ./smf-healthcheck.sh:/openair-smf/bin/smf-healthcheck.sh
+            - ./oai-smf.conf:/openair-smf/bin/oai-smf.conf
+        healthcheck:
+            test: /bin/bash -c "/openair-smf/bin/smf-healthcheck.sh"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+        networks:
+            public_net:
+                ipv4_address: 192.168.71.133
+    oai-spgwu:
+        container_name: "rfsim5g-oai-spgwu"
+        image: oai-spgwu-tiny:latest
+        environment:
+            - TZ=Europe/Paris
+            - PID_DIRECTORY=/var/run
+            - SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP=eth0
+            - SGW_INTERFACE_NAME_FOR_SX=eth0
+            - PGW_INTERFACE_NAME_FOR_SGI=eth0
+            - NETWORK_UE_NAT_OPTION=yes
+            - NETWORK_UE_IP=12.1.1.0/24
+            - SPGWC0_IP_ADDRESS=192.168.71.133
+            - BYPASS_UL_PFCP_RULES=no
+            - MCC=208
+            - MNC=99
+            - MNC03=099
+            - TAC=1
+            - GTP_EXTENSION_HEADER_PRESENT=yes
+            - GW_ID=1
+            - REALM=openairinterface.org
+            - ENABLE_5G_FEATURES=yes
+            - REGISTER_NRF=yes
+            - USE_FQDN_NRF=yes
+            - UPF_FQDN_5G=oai-spgwu
+            - NRF_IPV4_ADDRESS=192.168.71.130
+            - NRF_PORT=80
+            - NRF_API_VERSION=v1
+            - NRF_FQDN=oai-nrf
+            - NSSAI_SST_0=1
+            - NSSAI_SD_0=1
+            - DNN_0=oai
+        depends_on:
+            - oai-nrf
+        cap_add:
+            - NET_ADMIN
+            - SYS_ADMIN
+        cap_drop:
+            - ALL
+        privileged: true
+        volumes:
+            - ./spgwu-healthcheck.sh:/openair-spgwu-tiny/bin/spgwu-healthcheck.sh
+        healthcheck:
+            test: /bin/bash -c "/openair-spgwu-tiny/bin/spgwu-healthcheck.sh"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+        networks:
+            public_net:
+                ipv4_address: 192.168.71.134
+            traffic_net:
+                ipv4_address: 192.168.72.134
+    oai-ext-dn:
+        image: ubuntu:bionic
+        privileged: true
+        container_name: rfsim5g-oai-ext-dn
+        entrypoint: /bin/bash -c \
+              "apt update; apt install -y iptables iproute2 iperf iputils-ping;"\
+              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
+              "ip route add 12.1.1.0/24 via 192.168.72.134 dev eth0; sleep infinity"
+        depends_on:
+            - oai-spgwu
+        networks:
+            traffic_net:
+                ipv4_address: 192.168.72.135
+        healthcheck:
+            test: /bin/bash -c "ping -c 2 192.168.72.134"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+    oai-gnb:
+        image: oai-gnb:int-w32
+        privileged: true
+        container_name: rfsim5g-oai-gnb
+        environment: 
+            RFSIMULATOR: server
+            USE_SA_TDD_MONO: 'yes'
+            GNB_NAME: gnb-rfsim
+            TAC: 1
+            MCC: '208'
+            MNC: '99'
+            MNC_LENGTH: 2
+            NSSAI_SST: 1
+            NSSAI_SD0: 1
+            NSSAI_SD1: 112233
+            AMF_IP_ADDRESS: 192.168.71.132
+            GNB_NGA_IF_NAME: eth0
+            GNB_NGA_IP_ADDRESS: 192.168.71.136
+            GNB_NGU_IF_NAME: eth0
+            GNB_NGU_IP_ADDRESS: 192.168.71.136
+            USE_ADDITIONAL_OPTIONS: --sa -E --rfsim
+        depends_on:
+            - oai-ext-dn
+        networks:
+            public_net:
+                ipv4_address: 192.168.71.136
+        healthcheck:
+            test: /bin/bash -c "pgrep nr-softmodem"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+    oai-nr-ue:
+        image: oai-nr-ue:int-w32
+        privileged: true
+        container_name: rfsim5g-oai-nr-ue
+        environment: 
+            RFSIMULATOR: 192.168.71.136
+            FULL_IMSI: '208990100001100'
+            FULL_KEY: 'fec86ba6eb707ed08905757b1bb44b8f'
+            OPC: 'C42449363BBAD02B66D16BC975D77CC1'
+            DNN: oai
+            NSSAI_SST: 1
+            NSSAI_SD: 1
+            USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 -C 3619200000 --nokrnmod
+        depends_on:
+            - oai-gnb
+        networks:
+            public_net:
+                ipv4_address: 192.168.71.137
+        healthcheck:
+            test: /bin/bash -c "pgrep nr-uesoftmodem"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+
+networks:
+    public_net:
+        driver: bridge
+        name: rfsim5g-oai-public-net
+        ipam:
+            config:
+                - subnet: 192.168.71.128/26
+        driver_opts:
+            com.docker.network.bridge.name: "rfsim5g-public"
+    traffic_net:
+        driver: bridge
+        name: rfsim5g-oai-traffic_net-net
+        ipam:
+            config:
+                - subnet: 192.168.72.128/26
+        driver_opts:
+            com.docker.network.bridge.name: "rfsim5g-traffic"

ci-scripts/yaml_files/5g_rfsimulator/mysql-healthcheck.sh

+#!/bin/bash
+set -eo pipefail
+
+if [ "$MYSQL_ROOT_PASSWORD" ] && [ -z "$MYSQL_USER" ] && [ -z "$MYSQL_PASSWORD" ]; then
+	echo >&2 'Healthcheck error: cannot determine root password (and MYSQL_USER and MYSQL_PASSWORD were not set)'
+	exit 0
+fi
+
+host="$(hostname --ip-address || echo '127.0.0.1')"
+user="${MYSQL_USER:-root}"
+export MYSQL_PWD="${MYSQL_PASSWORD:-$MYSQL_ROOT_PASSWORD}"
+
+args=(
+	# force mysql to not use the local "mysqld.sock" (test "external" connectivity)
+	-h"$host"
+	-u"$user"
+	--silent
+)
+
+STATUS=0
+if command -v mysqladmin &> /dev/null; then
+	if mysqladmin "${args[@]}" ping > /dev/null; then
+		database_check=$(mysql -u$user -D oai_db --silent -e "SELECT * FROM users;")
+		if [[ -z $database_check ]]; then
+			echo "Healthcheck error: oai_db not populated"
+			STATUS=1
+		fi
+		STATUS=0
+	else
+		echo "Healthcheck error: Mysql port inactive"
+		STATUS=1
+	fi
+else
+	if select="$(echo 'SELECT 1' | mysql "${args[@]}")" && [ "$select" = '1' ]; then
+		database_check=$(mysql -u$user -D oai_db --silent -e "SELECT * FROM users;")
+		if [[ -z $database_check ]]; then
+			echo "Healthcheck error: oai_db not populated"
+			STATUS=1
+		fi
+		STATUS=0
+	else
+		echo "Healthcheck error: Mysql port inactive"
+		STATUS=1
+	fi
+fi
+exit $STATUS

ci-scripts/yaml_files/5g_rfsimulator/nrf-healthcheck.sh

+#!/bin/bash
+set -eo pipefail
+
+STATUS=0
+NRF_IP_SBI_INTERFACE=$(ifconfig $NRF_INTERFACE_NAME_FOR_SBI | grep inet | awk {'print $2'})
+NRF_SBI_PORT_STATUS=$(netstat -tnpl | grep -o "$NRF_IP_SBI_INTERFACE:$NRF_INTERFACE_PORT_FOR_SBI")
+#Check if entrypoint properly configured the conf file and no parameter is unset(optional)
+NB_UNREPLACED_AT=`cat /openair-nrf/etc/*.conf | grep -v contact@openairinterface.org | grep -c @ || true`
+
+if [ $NB_UNREPLACED_AT -ne 0 ]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY configuration file is not configured properly"
+fi
+
+if [[ -z $NRF_SBI_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY SBI TCP/HTTP port $NRF_INTERFACE_PORT_FOR_SBI is not listening."
+fi
+
+exit $STATUS
\ No newline at end of file

ci-scripts/yaml_files/5g_rfsimulator/oai-smf.conf

+################################################################################
+# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The OpenAirInterface Software Alliance licenses this file to You under
+# the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.openairinterface.org/?page_id=698
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
+# For more information about the OpenAirInterface (OAI) Software Alliance:
+#      contact@openairinterface.org
+################################################################################
+
+SMF =
+{
+    FQDN = "oai-smf-svc";               
+    INSTANCE      = 0;         # 0 is the default
+    PID_DIRECTORY = "/var/run";  # /var/run is the default
+
+    INTERFACES :
+    {
+        N4 :
+        {
+            # SMF binded interface for N4 communication (UPF)
+            INTERFACE_NAME = "eth0"; # YOUR NETWORK CONFIG HERE
+            IPV4_ADDRESS   = "read";                        
+         };
+
+        SBI :
+        {
+            # SMF binded interface for SBI interface (e.g., communication with AMF, UDM)
+            INTERFACE_NAME = "eth0";     # YOUR NETWORK CONFIG HERE
+            IPV4_ADDRESS   = "read";
+            PORT           = 80;       # YOUR NETWORK CONFIG HERE (default: 80)
+            HTTP2_PORT     = 9090; # YOUR NETWORK CONFIG HERE
+            API_VERSION    = "v1";                # YOUR SMF API VERSION CONFIG HERE
+         };                 
+
+    };
+
+
+    # Pool of UE assigned IP addresses
+    # Do not make IP pools overlap
+    # first IPv4 address X.Y.Z.1 is reserved for GTP network device on UPF
+    IP_ADDRESS_POOL :
+    {
+        IPV4_LIST = (
+                      {RANGE = "12.1.1.2 - 12.1.1.128";},         # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
+                      {RANGE = "12.1.1.129 - 12.1.1.224";},       # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
+                      {RANGE = "10.10.10.2 - 10.10.10.253";}  # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
+
+                    );
+        IPV6_LIST = (
+                      {PREFIX = "2001:1:2::/64";},                # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
+                      {PREFIX = "3001:1:2::/64";},                # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
+                      {PREFIX = "4001:1:2::/64";}                 # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
+                    );
+    };
+
+    DNN_LIST = (
+       # IPV4_POOL, IPV6_POOL are index in IPV4_LIST, IPV6_LIST, PDU_SESSION_TYPE choice in {IPv4, IPv6, IPv4v6}
+      {DNN_NI = "default"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL  = 2; IPV6_POOL = -1},
+      {DNN_NI = "carrier.com"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 1; IPV6_POOL = -1},
+      {DNN_NI = "oai"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 0; IPV6_POOL = -1}
+    );
+
+    # DNS address communicated to UEs
+    DEFAULT_DNS_IPV4_ADDRESS     = "192.168.18.129";      # YOUR DNS CONFIG HERE
+    DEFAULT_DNS_SEC_IPV4_ADDRESS = "192.168.18.129";  # YOUR DNS CONFIG HERE
+    DEFAULT_DNS_IPV6_ADDRESS     = "2001:4860:4860::8888";            # YOUR DNS CONFIG HERE
+    DEFAULT_DNS_SEC_IPV6_ADDRESS = "2001:4860:4860::8844";            # YOUR DNS CONFIG HERE
+ 
+    SUPPORT_FEATURES: 
+    {
+      # STRING, {"yes", "no"}, 
+      REGISTER_NRF = "yes";  # Set to yes if SMF resgisters to an NRF
+      DISCOVER_UPF = "yes";  # Set to yes to enable UPF discovery and selection
+      FORCE_PUSH_PROTOCOL_CONFIGURATION_OPTIONS = "no"; # Non standard feature, normally should be set to "no", 
+                                                        # but you may need to set to yes for UE that do not explicitly request a PDN address through NAS signalling
+      USE_LOCAL_SUBSCRIPTION_INFO = "yes";  # Set to yes if SMF uses local subscription information instead of from an UDM
+      USE_FQDN_DNS = "yes";                  # Set to yes if AMF/UDM/NRF/UPF will relying on a DNS to resolve FQDN
+    }  
+  
+    AMF :
+    {
+      IPV4_ADDRESS = "0.0.0.0";  # YOUR AMF CONFIG HERE
+      PORT         = 80;            # YOUR AMF CONFIG HERE (default: 80)
+      API_VERSION  = "v1";   # YOUR AMF API VERSION FOR SBI CONFIG HERE
+      FQDN         = "oai-amf"               # YOUR AMF FQDN CONFIG HERE
+    };
+    
+    UDM :
+    {
+      IPV4_ADDRESS = "127.0.0.1";  # YOUR UDM CONFIG HERE
+      PORT         = 80;            # YOUR UDM CONFIG HERE (default: 80)
+      API_VERSION  = "v1";   # YOUR UDM API VERSION FOR SBI CONFIG HERE
+      FQDN         = "localhost"      # YOUR UDM FQDN CONFIG HERE
+    };    
+
+    NRF :
+    {
+      IPV4_ADDRESS = "192.168.71.130";  # YOUR NRF CONFIG HERE
+      PORT         = 80;            # YOUR NRF CONFIG HERE (default: 80)
+      API_VERSION  = "v1";   # YOUR NRF API VERSION FOR SBI CONFIG HERE
+      FQDN         = "oai-nrf"      # YOUR NRF FQDN CONFIG HERE
+    };
+        
+    UPF_LIST = (
+         {IPV4_ADDRESS = "192.168.71.134" ; FQDN = "oai-spgwu"}   # YOUR UPF CONFIG HERE
+    );   
+   
+    LOCAL_CONFIGURATION :
+    {
+      SESSION_MANAGEMENT_SUBSCRIPTION_LIST = (
+         { NSSAI_SST = 222, NSSAI_SD = "123", DNN = "default", DEFAULT_SESSION_TYPE = "IPV4", DEFAULT_SSC_MODE = 1, 
+           QOS_PROFILE_5QI = 7, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT", 
+           QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "20Mbps", SESSION_AMBR_DL = "22Mbps"},
+         { NSSAI_SST = 1; NSSAI_SD = "1", DNN = "oai", DEFAULT_SESSION_TYPE = "IPV4", DEFAULT_SSC_MODE = 1, 
+           QOS_PROFILE_5QI = 6, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT", 
+           QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "20Mbps", SESSION_AMBR_DL = "22Mbps"}
+        );                 
+    };   
+    
+};
+

ci-scripts/yaml_files/5g_rfsimulator/smf-healthcheck.sh

+#!/bin/bash
+set -eo pipefail
+
+STATUS=0
+SMF_IP_SBI_INTERFACE=$(ifconfig $SMF_INTERFACE_NAME_FOR_SBI | grep inet | awk {'print $2'})
+SMF_SBI_PORT_STATUS=$(netstat -tnpl | grep -o "$SMF_IP_SBI_INTERFACE:$SMF_INTERFACE_PORT_FOR_SBI")
+
+#Check if entrypoint properly configured the conf file and no parameter is unset(optional)
+#NB_UNREPLACED_AT=`cat /openair-smf/etc/*.conf | grep -v contact@openairinterface.org | grep -c @ || true`
+
+#if [ $NB_UNREPLACED_AT -ne 0 ]; then
+#	STATUS=-1
+#	echo "Healthcheck error: UNHEALTHY configuration file is not configured properly"
+#fi
+#
+if [[ -z $SMF_SBI_PORT_STATUS ]]; then
+	STATUS=-1
+	echo "Healthcheck error: UNHEALTHY SBI TCP/HTTP port $SMF_INTERFACE_PORT_FOR_SBI is not listening."
+fi
+
+exit $STATUS

ci-scripts/yaml_files/5g_rfsimulator/spgwu-healthcheck.sh

+#!/bin/bash
+set -eo pipefail
+
+STATUS=0
+SGW_PORT_FOR_S1U_S12_S4_UP=2152
+SGW_PORT_FOR_SX=8805
+SGW_IP_S1U_INTERFACE=$(ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP | grep inet | awk {'print $2'})
+SGW_IP_SX_INTERFACE=$(ifconfig $SGW_INTERFACE_NAME_FOR_SX | grep inet | awk {'print $2'})
+S1U_S12_S4_UP_PORT_STATUS=$(netstat -unpl | grep -o "$SGW_IP_S1U_INTERFACE:$SGW_PORT_FOR_S1U_S12_S4_UP")
+SX_PORT_STATUS=$(netstat -unpl | grep -o "$SGW_IP_SX_INTERFACE:$SGW_PORT_FOR_SX")
+#Check if entrypoint properly configured the conf file and no parameter is unset (optional)
+NB_UNREPLACED_AT=`cat /openair-spgwu/etc/*.conf | grep -v contact@openairinterface.org | grep -c @ || true`
+if [ $NB_UNREPLACED_AT -ne 0 ]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY configuration file is not configured properly"
+fi
+
+if [[ -z $S1U_S12_S4_UP_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY S1U port $SGW_PORT_FOR_S1U_S12_S4_UP is not listening."
+fi
+
+if [[ -z $SX_PORT_STATUS ]]; then
+	STATUS=1
+	echo "Healthcheck error: UNHEALTHY SX port $SGW_PORT_FOR_SX is not listening."
+fi
+
+exit $STATUS
\ No newline at end of file

common/config/config_userapi.c

@@ -83,9 +83,14 @@ char *config_check_valptr(paramdef_t *cfgoptions, char **ptr, int length) {
   }
 
   if (*ptr == NULL) {
-    *ptr = malloc(length>40?length:40);
     // LTS: dummy fix, waiting Francois full fix in 4G branch
     // the issue is we don't know at this point the size we will get
+    // for parmeters on the command line, 
+    // The length sould probably managed, in a later version
+    // 100 is a very large value for a string parameter of today OAI
+    if (length<100)
+       length=100;
+    *ptr = malloc(length);
 
     if ( *ptr != NULL) {
       memset(*ptr,0,length);

common/utils/nr/nr_common.c

@@ -196,6 +196,26 @@ uint32_t nr_get_code_rate(uint8_t Imcs, uint8_t table_idx) {
   }
 }
 
+
+int get_dmrs_port(int nl, uint16_t dmrs_ports) {
+
+  if (dmrs_ports == 0) return 0; // dci 1_0
+  int p = -1;
+  int found = -1;
+  for (int i=0; i<12; i++) { // loop over dmrs ports
+    if((dmrs_ports>>i)&0x01) { // check if current bit is 1
+      found++;
+      if (found == nl) { // found antenna port number corresponding to current layer
+        p = i;
+        break;
+      }
+    }
+  }
+  AssertFatal(p>-1,"No dmrs port corresponding to layer %d found\n",nl);
+  return p;
+}
+
+
 int get_subband_size(int NPRB,int size) {
   // implements table  5.2.1.4-2 from 36.214
   //

common/utils/nr/nr_common.h

@@ -62,7 +62,7 @@ uint8_t nr_get_Qm(uint8_t Imcs, uint8_t table_idx);
 uint32_t nr_get_code_rate(uint8_t Imcs, uint8_t table_idx);
 int get_subband_size(int NPRB,int size);
 void SLIV2SL(int SLIV,int *S,int *L);
-
+int get_dmrs_port(int nl, uint16_t dmrs_ports);
 
 #define CEILIDIV(a,b) ((a+b-1)/b)
 #define ROUNDIDIV(a,b) (((a<<1)+b)/(b<<1))

docker/Dockerfile.eNB.rhel8.2

@@ -48,6 +48,7 @@ RUN yum update -y && \
     yum install -y --enablerepo="ubi-8-codeready-builder" \
         lksctp-tools \
         nettle \
+        procps-ng \
         atlas \
         net-tools \
         iputils \

docker/Dockerfile.eNB.ubuntu18

@@ -51,6 +51,7 @@ RUN apt-get update && \
     DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
     DEBIAN_FRONTEND=noninteractive apt-get install --yes \
         software-properties-common \
+        procps \
         libsctp1 \
         libnettle6 \
         libblas3 \

docker/Dockerfile.gNB.rhel8.2

@@ -25,7 +25,7 @@
 #
 #---------------------------------------------------------------------
 
-FROM localhost/ran-build:latest AS gnb-build 
+FROM ran-build:latest AS gnb-build
 
 RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
@@ -37,11 +37,9 @@ RUN /bin/sh oaienv && \
     mkdir -p log && \
     ./build_oai --gNB --ninja -w USRP --verbose-ci
 
-#debug
-#RUN ldconfig -v
-#RUN ldd /oai-ran/targets/bin/nr-softmodem.Rel15
-#RUN ls -lst /oai-ran/targets/bin
-#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
+RUN yum install -y python3-pip && \
+    pip3 install --ignore-installed pyyaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/gnb_parameters.yaml
 
 #start from scratch for target executable
 FROM registry.access.redhat.com/ubi8/ubi:latest as oai-gnb
@@ -49,6 +47,7 @@ FROM registry.access.redhat.com/ubi8/ubi:latest as oai-gnb
 RUN yum repolist --disablerepo=* && \
     yum update -y && \
     yum install -y --enablerepo="ubi-8-codeready-builder" \
+        procps-ng \
         libXpm \
         libX11 \
         atlas \
@@ -62,6 +61,7 @@ RUN yum repolist --disablerepo=* && \
 
 WORKDIR /opt/oai-gnb/bin
 COPY --from=gnb-build /oai-ran/targets/bin/nr-softmodem.Rel15 .
+COPY --from=gnb-build /oai-ran/docker/scripts/gnb_entrypoint.sh entrypoint.sh
 
 WORKDIR /usr/local/lib/
 COPY --from=gnb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
@@ -99,23 +99,10 @@ COPY --from=gnb-build /lib64/libboost_timer.so.1.66.0 /lib64
 COPY --from=gnb-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
 
 RUN ldconfig
-#debug
-#RUN ldd /opt/oai-gnb/bin/nr-softmodem.Rel15
-#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
-#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
-#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
-#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
-#RUN ldd /usr/local/lib/libcoding.so
-#RUN ldd /usr/local/lib/libparams_libconfig.so
-#RUN ldd /usr/local/lib/libdfts.so
-#RUN ldd /usr/local/lib/libldpc.so
-#RUN ldd /usr/local/lib/libldpc_optim.so
-#RUN ldd /usr/local/lib/libldpc_optim8seg.so
-#RUN ldd /usr/local/lib/libldpc_orig.so
 
 # Copy the relevant configuration files for gNB
 WORKDIR /opt/oai-gnb/etc
-COPY --from=gnb-build /oai-ran/ci-scripts/conf_files/gnb.* .
+COPY --from=gnb-build /oai-ran/docker/etc .
 
 WORKDIR /opt/oai-gnb
 #EXPOSE 2152/udp  # S1U, GTP/UDP
@@ -125,6 +112,5 @@ WORKDIR /opt/oai-gnb
 #EXPOSE 50000/udp # IF5 / ORI (control)
 #EXPOSE 50001/udp # IF5 / ECPRI (data)
 
-#CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]
-#ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"]
-CMD ["sleep", "infinity"]
+ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"]
+CMD ["/opt/oai-gnb/bin/nr-softmodem.Rel15", "-O", "/opt/oai-gnb/etc/gnb.conf"]

docker/Dockerfile.gNB.ubuntu18

@@ -25,7 +25,7 @@
 #
 #---------------------------------------------------------------------
 
-FROM ran-build:latest AS gnb-build 
+FROM ran-build:latest AS gnb-build
 
 RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
@@ -37,23 +37,22 @@ RUN /bin/sh oaienv && \
     mkdir -p log && \
     ./build_oai --gNB --ninja -w USRP --verbose-ci
 
-#debug
-RUN ldconfig -v
-RUN ldd /oai-ran/targets/bin/nr-softmodem.Rel15
-RUN ls -lst /oai-ran/targets/bin
-RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
+RUN apt-get install -y python3-pip && \
+    pip3 install --ignore-installed pyyaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/gnb_parameters.yaml
 
 #start from scratch for target executable
 FROM ubuntu:bionic as oai-gnb
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Europe
-RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
 
 RUN apt-get update && \
     DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
     DEBIAN_FRONTEND=noninteractive apt-get install --yes \
         software-properties-common \
+        procps \
         libsctp1 \
+        tzdata \
         libnettle6 \
         libblas3 \
         libatlas3-base \
@@ -76,6 +75,7 @@ RUN apt-get update && \
 
 WORKDIR /opt/oai-gnb/bin
 COPY --from=gnb-build /oai-ran/targets/bin/nr-softmodem.Rel15 .
+COPY --from=gnb-build /oai-ran/docker/scripts/gnb_entrypoint.sh entrypoint.sh
 
 WORKDIR /usr/local/lib/
 COPY --from=gnb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
@@ -96,23 +96,10 @@ RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/li
 COPY --from=gnb-build /usr/local/lib/libprotobuf-c.so.1 .
 
 RUN ldconfig
-#debug
-#RUN ldd /opt/oai-gnb/bin/nr-softmodem.Rel15
-#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
-#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
-#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
-#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
-#RUN ldd /usr/local/lib/libcoding.so
-#RUN ldd /usr/local/lib/libparams_libconfig.so
-#RUN ldd /usr/local/lib/libdfts.so
-#RUN ldd /usr/local/lib/libldpc.so
-#RUN ldd /usr/local/lib/libldpc_optim.so
-#RUN ldd /usr/local/lib/libldpc_optim8seg.so
-#RUN ldd /usr/local/lib/libldpc_orig.so
 
 # Copy the relevant configuration files for gNB
 WORKDIR /opt/oai-gnb/etc
-COPY --from=gnb-build /oai-ran/ci-scripts/conf_files/gnb.* ./
+COPY --from=gnb-build /oai-ran/docker/etc .
 
 WORKDIR /opt/oai-gnb
 #EXPOSE 2152/udp  # S1U, GTP/UDP
@@ -122,6 +109,5 @@ WORKDIR /opt/oai-gnb
 #EXPOSE 50000/udp # IF5 / ORI (control)
 #EXPOSE 50001/udp # IF5 / ECPRI (data)
 
-#CMD ["/opt/oai-gnb/bin/nr-softmodem", "-O", "/opt/oai-gnb/etc/gnb.conf"]
-#ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"]
-CMD ["sleep", "infinity"]
+ENTRYPOINT ["/opt/oai-gnb/bin/entrypoint.sh"]
+CMD ["/opt/oai-gnb/bin/nr-softmodem.Rel15", "-O", "/opt/oai-gnb/etc/gnb.conf"]

docker/Dockerfile.lteRU.rhel8.2

@@ -48,6 +48,7 @@ ENV TZ=Europe/Paris
 RUN yum update -y && \
     yum install -y --enablerepo="ubi-8-codeready-builder" \
         tzdata \
+        procps-ng \
         atlas \
         net-tools \
         iputils \

docker/Dockerfile.lteRU.ubuntu18

@@ -50,6 +50,7 @@ RUN apt-get update && \
     DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
     DEBIAN_FRONTEND=noninteractive apt-get install --yes \
         tzdata \
+        procps \
         software-properties-common \
         libblas3 \
         libatlas3-base \

docker/Dockerfile.lteUE.rhel8.2

@@ -48,6 +48,7 @@ FROM registry.access.redhat.com/ubi8/ubi:latest as oai-lte-ue
 RUN yum update -y && \
     yum install -y --enablerepo="ubi-8-codeready-builder" \
         lksctp-tools \
+        procps-ng \
         nettle \
         atlas \
         iproute \

docker/Dockerfile.lteUE.ubuntu18

@@ -52,6 +52,7 @@ RUN apt-get update && \
     DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
     DEBIAN_FRONTEND=noninteractive apt-get install --yes \
         software-properties-common \
+        procps \
         libsctp1 \
         libnettle6 \
         liblapacke \

docker/Dockerfile.nrUE.rhel8.2

@@ -25,7 +25,7 @@
 #
 #---------------------------------------------------------------------
 
-FROM localhost/ran-build:latest AS nr-ue-build 
+FROM ran-build:latest AS nr-ue-build 
 
 RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
@@ -37,18 +37,15 @@ RUN /bin/sh oaienv && \
     mkdir -p log && \
     ./build_oai --nrUE --ninja -w USRP --verbose-ci
 
-# debug
-#RUN ldconfig -v
-#RUN ldd /oai-ran/targets/bin/nr-uesoftmodem.Rel15
-#RUN ls -lst /oai-ran/targets/bin
-#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
-
 #start from scratch for target executable
 FROM registry.access.redhat.com/ubi8/ubi:latest as oai-nr-ue
+ENV TZ=Europe/Paris
 
 RUN yum update -y && \
     yum install -y --enablerepo="ubi-8-codeready-builder" \
         lksctp-tools \
+        procps-ng \
+        tzdata \
         nettle \
         net-tools \
         iputils \
@@ -61,6 +58,10 @@ RUN yum update -y && \
 
 WORKDIR /opt/oai-nr-ue/bin
 COPY --from=nr-ue-build /oai-ran/targets/bin/nr-uesoftmodem.Rel15 .
+COPY --from=nr-ue-build /oai-ran/docker/scripts/nr_ue_entrypoint.sh entrypoint.sh
+
+WORKDIR /opt/oai-nr-ue/etc
+COPY --from=nr-ue-build /oai-ran/ci-scripts/conf_files/nr-ue-sim.conf .
 
 WORKDIR /usr/local/lib/
 COPY --from=nr-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
@@ -98,24 +99,11 @@ COPY --from=nr-ue-build /lib64/libboost_timer.so.1.66.0 /lib64
 COPY --from=nr-ue-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
 
 RUN ldconfig
-#RUN ldd /opt/oai-nr-ue/bin/nr-uesoftmodem.Rel15
-#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
-#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
-#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
-#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
-#RUN ldd /usr/local/lib/libcoding.so
-#RUN ldd /usr/local/lib/libparams_libconfig.so
-#RUN ldd /usr/local/lib/libdfts.so
-#RUN ldd /usr/local/lib/libldpc.so
-#RUN ldd /usr/local/lib/libldpc_optim.so
-#RUN ldd /usr/local/lib/libldpc_optim8seg.so
-#RUN ldd /usr/local/lib/libldpc_orig.so
 
 # Copy the relevant configuration files for eNB
 WORKDIR /opt/oai-nr-ue/etc
 COPY --from=nr-ue-build /oai-ran/ci-scripts/conf_files/ue.* .
 
 WORKDIR /opt/oai-nr-ue
-#CMD ["/opt/oai-nr-ue/bin/nr-uesoftmodem", "-O", "/opt/oai-nr-ue/etc/enb.conf"]
-#ENTRYPOINT ["/opt/oai-nr-ue/bin/entrypoint.sh"]
-CMD ["sleep", "infinity"]
+CMD ["/opt/oai-nr-ue/bin/nr-uesoftmodem.Rel15", "-O", "/opt/oai-nr-ue/etc/nr-ue-sim.conf"]
+ENTRYPOINT ["/opt/oai-nr-ue/bin/entrypoint.sh"]

docker/Dockerfile.nrUE.ubuntu18

@@ -25,7 +25,7 @@
 #
 #---------------------------------------------------------------------
 
-FROM ran-build:latest AS nr-ue-build 
+FROM ran-build:latest AS nr-ue-build
 
 RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
@@ -37,23 +37,18 @@ RUN /bin/sh oaienv && \
     mkdir -p log && \
     ./build_oai --nrUE --ninja -w USRP --verbose-ci
 
-# debug
-#RUN ldconfig -v
-#RUN ldd /oai-ran/targets/bin/nr-uesoftmodem.Rel15
-#RUN ls -lst /oai-ran/targets/bin
-#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
-
 #start from scratch for target executable
 FROM ubuntu:bionic as oai-nr-ue
 ENV DEBIAN_FRONTEND=noninteractive
-ENV TZ=Europe
-RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
+ENV TZ=Europe/Paris
 
 RUN apt-get update && \
     DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
     DEBIAN_FRONTEND=noninteractive apt-get install --yes \
         software-properties-common \
         libsctp1 \
+        procps \
+        tzdata \
         libnettle6 \
         liblapacke \
         libatlas3-base \
@@ -62,6 +57,7 @@ RUN apt-get update && \
         net-tools \
         iputils-ping \
         iproute2 \
+        iperf \
         libyaml-0-2 && \
     # Install UHD driver from ettus ppa 
     # At time of writing, it is 3.14
@@ -76,6 +72,10 @@ RUN apt-get update && \
 
 WORKDIR /opt/oai-nr-ue/bin
 COPY --from=nr-ue-build /oai-ran/targets/bin/nr-uesoftmodem.Rel15 .
+COPY --from=nr-ue-build /oai-ran/docker/scripts/nr_ue_entrypoint.sh entrypoint.sh
+
+WORKDIR /opt/oai-nr-ue/etc
+COPY --from=nr-ue-build /oai-ran/ci-scripts/conf_files/nr-ue-sim.conf .
 
 WORKDIR /usr/local/lib/
 COPY --from=nr-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
@@ -96,25 +96,7 @@ RUN /bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/li
 COPY --from=nr-ue-build /usr/local/lib/libprotobuf-c.so.1 .
 
 RUN ldconfig
-#debug
-#RUN ldd /opt/oai-nr-ue/bin/nr-uesoftmodem.Rel15
-#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
-#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
-#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
-#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
-#RUN ldd /usr/local/lib/libcoding.so
-#RUN ldd /usr/local/lib/libparams_libconfig.so
-#RUN ldd /usr/local/lib/libdfts.so
-#RUN ldd /usr/local/lib/libldpc.so
-#RUN ldd /usr/local/lib/libldpc_optim.so
-#RUN ldd /usr/local/lib/libldpc_optim8seg.so
-#RUN ldd /usr/local/lib/libldpc_orig.so
-
-# Copy the relevant configuration files for eNB
-WORKDIR /opt/oai-nr-ue/etc
-COPY --from=nr-ue-build /oai-ran/ci-scripts/conf_files/ue.* .
 
 WORKDIR /opt/oai-nr-ue
-#CMD ["/opt/oai-nr-ue/bin/nr-uesoftmodem", "-O", "/opt/oai-nr-ue/etc/enb.conf"]
-#ENTRYPOINT ["/opt/oai-nr-ue/bin/entrypoint.sh"]
-CMD ["sleep", "infinity"]
+CMD ["/opt/oai-nr-ue/bin/nr-uesoftmodem.Rel15", "-O", "/opt/oai-nr-ue/etc/nr-ue-sim.conf"]
+ENTRYPOINT ["/opt/oai-nr-ue/bin/entrypoint.sh"]

docker/Dockerfile.phySim.rhel8.2

@@ -25,7 +25,7 @@
 #
 #---------------------------------------------------------------------
 
-FROM localhost/ran-build:develop AS phy-sim-build
+FROM ran-build:develop AS phy-sim-build
 
 RUN rm -Rf /oai-ran
 WORKDIR /oai-ran

docker/Dockerfile.ran.rhel8.2

@@ -44,8 +44,11 @@ RUN rm -f /etc/rhsm-host && \
        file \
        psmisc \
        git \
+       # python3-pip and pyyaml are used for conf template generation
+       python3-pip
        #unzip is needed for protobuf
        unzip && \
+    pip3 install --ignore-installed pyyaml && \
     echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
     echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
 

docker/Dockerfile.ran.ubuntu18

@@ -42,7 +42,10 @@ RUN apt-get update && \
        git \
        xxd \
        #unzip is needed for protobuf
-       unzip
+       unzip \
+       # python3-pip for conf template generation
+       python3-pip && \
+    pip3 install --ignore-installed pyyaml
 
 # In some network environments, GIT proxy is required
 RUN /bin/bash -c "if [[ -v NEEDED_GIT_PROXY ]]; then git config --global http.proxy $NEEDED_GIT_PROXY; fi"
@@ -56,4 +59,3 @@ RUN /bin/sh oaienv && \
     cd cmake_targets && \
     mkdir -p log && \
     ./build_oai -I -w USRP
-

docker/scripts/enb_entrypoint.sh

@@ -4,6 +4,8 @@ set -euo pipefail
 
 PREFIX=/opt/oai-enb
 RRC_INACTIVITY_THRESHOLD=${RRC_INACTIVITY_THRESHOLD:-0}
+ENABLE_MEASUREMENT_REPORTS=${ENABLE_MEASUREMENT_REPORTS:-no}
+ENABLE_X2=${ENABLE_X2:-no}
 
 # Based another env var, pick one template to use
 if [[ -v USE_FDD_CU ]]; then ln -s $PREFIX/etc/cu.fdd.conf $PREFIX/etc/enb.conf; fi

docker/scripts/enb_parameters.yaml

@@ -123,7 +123,7 @@
     - key: bands
       env: "@UTRA_BAND_ID@"
       
-  - filePrefix: enb.band7.tm1.25PRB.usrpb210
+  - filePrefix: enb.band7.tm1.fr1.25PRB.usrpb210.conf
     outputfilename: "enb.fdd.conf"
     config:
     - key: Active_eNBs
@@ -147,6 +147,10 @@
       env: "@NID_CELL@"
     - key: N_RB_DL
       env: "@NB_PRB@"
+    - key: enable_measurement_reports
+      env: "@ENABLE_MEASUREMENT_REPORTS@"
+    - key: enable_x2
+      env: "@ENABLE_X2@"
     - key: ipv4
       env: "@MME_S1C_IP_ADDRESS@"
     - key: ENB_INTERFACE_NAME_FOR_S1_MME

docker/scripts/generateTemplate.py

@@ -48,18 +48,20 @@ def main():
                              "du.band7.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rru.fdd": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rru.tdd": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
-                             "enb.band7.tm1.25PRB.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+                             "enb.band7.tm1.fr1.25PRB.usrpb210.conf": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "enb.band40.tm1.25PRB.FairScheduler.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rcc.band7.tm1.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rcc.band7.tm1.if4p5.lo.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "rcc.band40.tm1.25PRB": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+                             "gnb.band78.tm1.fr1.106PRB.usrpb210.conf": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+                             "gnb.band78.sa.fr1.106PRB.usrpn310.conf": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "ue.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "ue_sim_ci": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}'
                              }
         print('inputfile = ' + inputfile)
         if filePrefix in prefix_outputfile:
           outputfile1 = prefix_outputfile[filePrefix]  
-      
+
         directory = f'{data[0]["paths"]["dest_dir"]}'
         if not os.path.exists(directory):
           os.makedirs(directory, exist_ok=True)
@@ -71,11 +73,21 @@ def main():
             if re.search(r'EHPLMN_LIST', line):
               outputfile.write(line)
               continue
+            if re.search(r'sd  = 0x1;', line):
+              templine = re.sub(r'sd  = 0x1;', 'sd  = 0x@NSSAI_SD0@;', line)
+              outputfile.write(templine)
+              continue
+            if re.search(r'sd  = 0x112233;', line):
+              templine = re.sub(r'sd  = 0x112233;', 'sd  = 0x@NSSAI_SD1@;', line)
+              outputfile.write(templine)
+              continue
             for key in config["config"]:
               if line.find(key["key"]) >= 0:
                 count += 1
                 if re.search(r'preference', line):
                   templine = line
+                elif re.search(r'mnc_length', line) and key["key"] == "mnc":
+                  continue
                 elif re.search(r'plmn_list', line):
                   templine = re.sub(r'[0-9]+', '""', line)
                   templine = re.sub(r'\"\"', key["env"]["mcc"], templine, 1)

docker/scripts/gnb_entrypoint.sh

+#!/bin/bash
+
+set -euo pipefail
+
+PREFIX=/opt/oai-gnb
+ENABLE_X2=${ENABLE_X2:-yes}
+
+# Based another env var, pick one template to use
+if [[ -v USE_NSA_TDD_MONO ]]; then ln -s $PREFIX/etc/gnb.nsa.tdd.conf $PREFIX/etc/gnb.conf; fi
+if [[ -v USE_SA_TDD_MONO ]]; then ln -s $PREFIX/etc/gnb.sa.tdd.conf $PREFIX/etc/gnb.conf; fi
+
+# Only this template will be manipulated
+CONFIG_FILES=`ls $PREFIX/etc/gnb.conf || true`
+
+for c in ${CONFIG_FILES}; do
+    # grep variable names (format: ${VAR}) from template to be rendered
+    VARS=$(grep -oP '@[a-zA-Z0-9_]+@' ${c} | sort | uniq | xargs)
+
+    # create sed expressions for substituting each occurrence of ${VAR}
+    # with the value of the environment variable "VAR"
+    EXPRESSIONS=""
+    for v in ${VARS}; do
+        NEW_VAR=`echo $v | sed -e "s#@##g"`
+        if [[ "${!NEW_VAR}x" == "x" ]]; then
+            echo "Error: Environment variable '${NEW_VAR}' is not set." \
+                "Config file '$(basename $c)' requires all of $VARS."
+            exit 1
+        fi
+        EXPRESSIONS="${EXPRESSIONS};s|${v}|${!NEW_VAR}|g"
+    done
+    EXPRESSIONS="${EXPRESSIONS#';'}"
+
+    # render template and inline replace config file
+    sed -i "${EXPRESSIONS}" ${c}
+done
+
+# Load the USRP binaries
+if [[ -v USE_B2XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t b2xx
+elif [[ -v USE_X3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t x3xx
+elif [[ -v USE_N3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t n3xx
+fi
+
+echo "=================================="
+echo "== Starting gNB soft modem"
+if [[ -v USE_ADDITIONAL_OPTIONS ]]; then
+    echo "Additional option(s): ${USE_ADDITIONAL_OPTIONS}"
+    new_args=()
+    while [[ $# -gt 0 ]]; do
+        new_args+=("$1")
+        shift
+    done
+    for word in ${USE_ADDITIONAL_OPTIONS}; do
+        new_args+=("$word")
+    done
+    echo "${new_args[@]}"
+    exec "${new_args[@]}"
+else
+    echo "$@"
+    exec "$@"
+fi

docker/scripts/gnb_parameters.yaml

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+---
+- paths:
+    source_dir: "ci-scripts/conf_files/"
+    dest_dir: docker/etc
+
+- configurations:
+  - filePrefix: gnb.band78.tm1.fr1.106PRB.usrpb210.conf
+    outputfilename: "gnb.nsa.tdd.conf"
+    config:
+    - key: Active_gNBs
+      env: "@GNB_NAME@"
+    - key: gNB_name
+      env: "@GNB_NAME@"
+    - key: plmn_list
+      env:
+        mcc: "@MCC@"
+        mnc: "@MNC@"
+        mnc_length: "@MNC_LENGTH@"
+    - key: tracking_area_code
+      env: "@TAC@"
+    - key: enable_x2
+      env: "@ENABLE_X2@"
+    - key: ipv4
+      env: "@ENB_X2_IP_ADDRESS@"
+    - key: GNB_INTERFACE_NAME_FOR_S1_MME
+      env: "@GNB_S1C_IF_NAME@"
+    - key: GNB_IPV4_ADDRESS_FOR_S1_MME
+      env: "@GNB_S1C_IP_ADDRESS@"
+    - key: GNB_INTERFACE_NAME_FOR_S1U
+      env: "@GNB_S1U_IF_NAME@"
+    - key: GNB_IPV4_ADDRESS_FOR_S1U
+      env: "@GNB_S1U_IP_ADDRESS@"
+    - key: GNB_IPV4_ADDRESS_FOR_X2C
+      env: "@GNB_X2_IP_ADDRESS@"
+    - key: rrc_inactivity_threshold
+      env: "@RRC_INACTIVITY_THRESHOLD@"
+    - key: FLEXRAN_ENABLED
+      env: "@FLEXRAN_ENABLED@"
+    - key: FLEXRAN_INTERFACE_NAME
+      env: "@FLEXRAN_INTERFACE_NAME@"
+    - key: FLEXRAN_IPV4_ADDRESS
+      env: "@FLEXRAN_IPV4_ADDRESS@"
+
+  - filePrefix: gnb.band78.sa.fr1.106PRB.usrpn310.conf
+    outputfilename: "gnb.sa.tdd.conf"
+    config:
+    - key: Active_gNBs
+      env: "@GNB_NAME@"
+    - key: gNB_name
+      env: "@GNB_NAME@"
+    - key: mcc
+      env: "@MCC@"
+    - key: mnc
+      env: "@MNC@"
+    - key: mnc_length
+      env: "@MNC_LENGTH@"
+    - key: tracking_area_code
+      env: "@TAC@"
+    - key: sst
+      env: "@NSSAI_SST@"
+    - key: ipv4
+      env: "@AMF_IP_ADDRESS@"
+    - key: GNB_INTERFACE_NAME_FOR_NG_AMF
+      env: "@GNB_NGA_IF_NAME@"
+    - key: GNB_IPV4_ADDRESS_FOR_NG_AMF
+      env: "@GNB_NGA_IP_ADDRESS@"
+    - key: GNB_INTERFACE_NAME_FOR_NGU
+      env: "@GNB_NGU_IF_NAME@"
+    - key: GNB_IPV4_ADDRESS_FOR_NGU
+      env: "@GNB_NGU_IP_ADDRESS@"
+

docker/scripts/nr_ue_entrypoint.sh

+#!/bin/bash
+
+set -euo pipefail
+
+PREFIX=/opt/oai-nr-ue
+
+# Based another env var, pick one template to use
+#if [[ -v USE_NFAPI ]]; then ln -s $PREFIX/etc/ue.nfapi.conf $PREFIX/etc/ue.conf; fi
+
+# Only this template will be manipulated and the USIM one!
+CONFIG_FILES=`ls $PREFIX/etc/ue.conf $PREFIX/etc/nr-ue-sim.conf || true`
+
+for c in ${CONFIG_FILES}; do
+    # grep variable names (format: ${VAR}) from template to be rendered
+    VARS=$(grep -oP '@[a-zA-Z0-9_]+@' ${c} | sort | uniq | xargs)
+
+    # create sed expressions for substituting each occurrence of ${VAR}
+    # with the value of the environment variable "VAR"
+    EXPRESSIONS=""
+    for v in ${VARS}; do
+        NEW_VAR=`echo $v | sed -e "s#@##g"`
+        if [[ "${!NEW_VAR}x" == "x" ]]; then
+            echo "Error: Environment variable '${NEW_VAR}' is not set." \
+                "Config file '$(basename $c)' requires all of $VARS."
+            exit 1
+        fi
+        EXPRESSIONS="${EXPRESSIONS};s|${v}|${!NEW_VAR}|g"
+    done
+    EXPRESSIONS="${EXPRESSIONS#';'}"
+
+    # render template and inline replace config file
+    sed -i "${EXPRESSIONS}" ${c}
+done
+
+# Load the USRP binaries
+if [[ -v USE_B2XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t b2xx
+elif [[ -v USE_X3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t x3xx
+elif [[ -v USE_N3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t n3xx
+fi
+
+# in case we have conf file, append
+new_args=()
+while [[ $# -gt 0 ]]; do
+  new_args+=("$1")
+  shift
+done
+
+echo "=================================="
+echo "== Starting NR UE soft modem"
+if [[ -v USE_ADDITIONAL_OPTIONS ]]; then
+    echo "Additional option(s): ${USE_ADDITIONAL_OPTIONS}"
+    for word in ${USE_ADDITIONAL_OPTIONS}; do
+        new_args+=("$word")
+    done
+    echo "${new_args[@]}"
+    exec "${new_args[@]}"
+else
+    echo "${new_args[@]}"
+    exec "${new_args[@]}"
+fi

executables/nr-softmodem-common.h

@@ -155,7 +155,4 @@ extern int emulate_rf;
 extern int numerology;
 extern int usrp_tx_thread;
 
-extern volatile int start_eNB;
-extern volatile int start_UE;
-
 #endif

executables/nr-ue.c

@@ -220,7 +220,6 @@ static void UE_synch(void *arg) {
       LOG_I(PHY, "[UE thread Synch] Running Initial Synch (mode %d)\n",UE->mode);
 
       uint64_t dl_carrier, ul_carrier;
-      double rx_gain_off = 0;
       nr_get_carrier_frequencies(&UE->frame_parms, &dl_carrier, &ul_carrier);
 
       if (nr_initial_sync(&syncD->proc, UE, 2) == 0) {
@@ -230,7 +229,7 @@ static void UE_synch(void *arg) {
 
         // rerun with new cell parameters and frequency-offset
         // todo: the freq_offset computed on DL shall be scaled before being applied to UL
-        nr_rf_card_config(&openair0_cfg[UE->rf_map.card], rx_gain_off, ul_carrier, dl_carrier, freq_offset);
+        nr_rf_card_config_freq(&openair0_cfg[UE->rf_map.card], ul_carrier, dl_carrier, freq_offset);
 
         LOG_I(PHY,"Got synch: hw_slot_offset %d, carrier off %d Hz, rxgain %f (DL %f Hz, UL %f Hz)\n",
               hw_slot_offset,
@@ -264,7 +263,7 @@ static void UE_synch(void *arg) {
 
           freq_offset *= -1;
 
-          nr_rf_card_config(&openair0_cfg[UE->rf_map.card], rx_gain_off, ul_carrier, dl_carrier, freq_offset);
+          nr_rf_card_config_freq(&openair0_cfg[UE->rf_map.card], ul_carrier, dl_carrier, freq_offset);
 
           LOG_I(PHY, "Initial sync failed: trying carrier off %d Hz\n", freq_offset);
 
@@ -307,11 +306,12 @@ void processSlotTX(void *arg) {
       ul_indication.frame_tx  = proc->frame_tx;
       ul_indication.slot_tx   = proc->nr_slot_tx;
       ul_indication.thread_id = proc->thread_id;
+      ul_indication.ue_sched_mode = rxtxD->ue_sched_mode;
 
       UE->if_inst->ul_indication(&ul_indication);
     }
 
-    if (UE->mode != loop_through_memory) {
+    if ((UE->mode != loop_through_memory) && (rxtxD->ue_sched_mode != NOT_PUSCH)) {
       phy_procedures_nrUE_TX(UE,proc,0);
     }
   }
@@ -358,6 +358,9 @@ void processSlotRX(void *arg) {
         nr_pdcp_tick(proc->frame_rx, proc->nr_slot_rx / UE->frame_parms.slots_per_subframe);
       }
     }
+    // calling UL_indication to schedule things other than PUSCH (eg, PUCCH)
+    rxtxD->ue_sched_mode = NOT_PUSCH;
+    processSlotTX(rxtxD);
 
     // Wait for PUSCH processing to finish
     notifiedFIFO_elt_t *res;
@@ -365,6 +368,7 @@ void processSlotRX(void *arg) {
     delNotifiedFIFO_elt(res);
 
   } else {
+    rxtxD->ue_sched_mode = SCHED_ALL;
     processSlotTX(rxtxD);
   }
 
@@ -373,8 +377,7 @@ void processSlotRX(void *arg) {
       if (get_softmodem_params()->usim_test==0) {
         pucch_procedures_ue_nr(UE,
                                gNB_id,
-                               proc,
-                               FALSE);
+                               proc);
       }
 
       LOG_D(PHY, "Sending Uplink data \n");

executables/nr-uesoftmodem.c

@@ -105,8 +105,6 @@ int config_sync_var=-1;
 
 
 RAN_CONTEXT_t RC;
-volatile int             start_eNB = 0;
-volatile int             start_UE = 0;
 volatile int             oai_exit = 0;
 
 
@@ -372,7 +370,8 @@ void init_openair0(void) {
 
     nr_get_carrier_frequencies(frame_parms, &dl_carrier, &ul_carrier);
 
-    nr_rf_card_config(&openair0_cfg[card], rx_gain_off, ul_carrier, dl_carrier, freq_off);
+    nr_rf_card_config_freq(&openair0_cfg[card], ul_carrier, dl_carrier, freq_off);
+    nr_rf_card_config_gain(&openair0_cfg[card], rx_gain_off);
 
     openair0_cfg[card].configFilename = get_softmodem_params()->rf_config_file;
 

nfapi/oai_integration/nfapi_pnf.c

@@ -59,6 +59,9 @@ extern RAN_CONTEXT_t RC;
 #include "openair1/SCHED_NR/fapi_nr_l1.h"
 #include "openair1/PHY/NR_TRANSPORT/nr_dlsch.h"
 #include "openair1/PHY/defs_gNB.h"
+#include <openair1/SCHED/fapi_l1.h>
+#include <openair1/PHY/NR_TRANSPORT/nr_transport_proto.h>
+#include <targets/RT/USER/lte-softmodem.h>
 
 
 #define NUM_P5_PHY 2
@@ -74,45 +77,6 @@ extern int nfapi_sync_var;
 
 extern int sync_var;
 
-extern void init_eNB_afterRU(void);
-extern void init_UE_stub(int nb_inst,int,int);
-extern void handle_nfapi_dci_dl_pdu(PHY_VARS_eNB *eNB, int frame, int subframe, L1_rxtx_proc_t *proc, nfapi_dl_config_request_pdu_t *dl_config_pdu);
-extern void handle_nfapi_ul_pdu(PHY_VARS_eNB *eNB,L1_rxtx_proc_t *proc, nfapi_ul_config_request_pdu_t *ul_config_pdu, uint16_t frame,uint8_t subframe,uint8_t srs_present);
-extern void handle_nfapi_dlsch_pdu(PHY_VARS_eNB *eNB,int frame, int subframe, L1_rxtx_proc_t *proc,  nfapi_dl_config_request_pdu_t *dl_config_pdu, uint8_t codeword_index, uint8_t *sdu);
-extern void handle_nfapi_hi_dci0_dci_pdu(PHY_VARS_eNB *eNB,int frame, int subframe, L1_rxtx_proc_t *proc, nfapi_hi_dci0_request_pdu_t *hi_dci0_config_pdu);
-extern void handle_nfapi_hi_dci0_hi_pdu(PHY_VARS_eNB *eNB,int frame, int subframe, L1_rxtx_proc_t *proc, nfapi_hi_dci0_request_pdu_t *hi_dci0_config_pdu);
-extern void handle_nfapi_bch_pdu(PHY_VARS_eNB *eNB,L1_rxtx_proc_t *proc, nfapi_dl_config_request_pdu_t *dl_config_pdu, uint8_t *sdu);
-extern void handle_nfapi_nr_ul_dci_pdu(PHY_VARS_gNB *gNB,
-			       int frame, int slot,
-			       nfapi_nr_ul_dci_request_pdus_t *ul_dci_request_pdu);
-extern void handle_nfapi_nr_pdcch_pdu(PHY_VARS_gNB *gNB,
-			       int frame, int slot,
-			       nfapi_nr_dl_tti_pdcch_pdu *pdcch_pdu);
-extern void handle_nr_nfapi_pdsch_pdu(PHY_VARS_gNB *gNB,int frame,int slot,
-                            nfapi_nr_dl_tti_pdsch_pdu *pdsch_pdu,
-                            uint8_t *sdu);
-extern void handle_nr_nfapi_ssb_pdu(PHY_VARS_gNB *gNB,int frame,int slot,
-                             nfapi_nr_dl_tti_request_pdu_t *dl_tti_pdu);
-extern void nr_fill_ulsch(PHY_VARS_gNB *gNB,
-                   int frame,
-                   int slot,
-                   nfapi_nr_pusch_pdu_t *ulsch_pdu);
-extern void nr_fill_pucch(PHY_VARS_gNB *gNB,
-                   int frame,
-                   int slot,
-                   nfapi_nr_pucch_pdu_t *pucch_pdu);
-extern void nr_fill_prach(PHY_VARS_gNB *gNB,
-                   int SFN,
-                   int Slot,
-                   nfapi_nr_prach_pdu_t *prach_pdu);
-extern void nr_fill_prach_ru(RU_t *ru,
-                      int SFN,
-                      int Slot,
-                      nfapi_nr_prach_pdu_t *prach_pdu);
-
-
-
-
 nfapi_tx_request_pdu_t *tx_request_pdu[1023][10][10]; // [frame][subframe][max_num_pdus]
 uint8_t nr_tx_pdus[32][16][4096];
 nfapi_nr_pdu_t *tx_data_request[1023][20][10]; //[frame][slot][max_num_pdus]

nfapi/oai_integration/nfapi_vnf.c

@@ -40,6 +40,7 @@
 #include "PHY/defs_eNB.h"
 #include "PHY/LTE_TRANSPORT/transport_proto.h"
 #include "openair2/LAYER2/NR_MAC_gNB/nr_mac_gNB.h"
+#include <targets/RT/USER/lte-softmodem.h>
 
 #include "common/ran_context.h"
 
@@ -196,7 +197,6 @@ int vnf_unpack_vendor_extension_tlv(nfapi_tl_t *tl, uint8_t **ppReadPackedMessag
 void install_nr_schedule_handlers(NR_IF_Module_t *if_inst);
 void install_schedule_handlers(IF_Module_t *if_inst);
 extern int single_thread_flag;
-extern void init_eNB_afterRU(void);
 extern uint16_t sf_ahead;
 extern uint16_t slot_ahead;
 

nfapi/open-nFAPI/nfapi/public_inc/nfapi_interface.h

@@ -2727,7 +2727,7 @@ typedef struct {
 } nfapi_cqi_indication_rel8_t;
 #define NFAPI_CQI_INDICATION_REL8_TAG 0x202f
 
-#define NFAPI_CC_MAX 4
+#define NFAPI_CC_MAX MAX_NUM_CCs
 typedef struct {
 	nfapi_tl_t tl;
 	uint16_t length;

openair1/PHY/CODING/3gpplte_sse.c

@@ -373,10 +373,10 @@ char interleave_compact_byte(short *base_interleaver,unsigned char *input, unsig
   short *ptr_intl=base_interleaver;
 #if defined(__x86_64) || defined(__i386__)
 #ifndef __AVX2__
-  __m128i tmp;
+  __m128i tmp={0};
   uint16_t *systematic2_ptr=(uint16_t *) output;
 #else
-  __m256i tmp;
+  __m256i tmp={0};
   uint32_t *systematic2_ptr=(uint32_t *) output;
 #endif
 #elif defined(__arm__)

openair1/PHY/CODING/3gpplte_turbo_decoder_avx2_16bit.c

@@ -933,7 +933,7 @@ unsigned char phy_threegpplte_turbo_decoder16avx2(int16_t *y,
   uint32_t db;
 
 
-  __m256i tmp, zeros=_mm256_setzero_si256();
+  __m256i tmp={0}, zeros=_mm256_setzero_si256();
 
 
   int offset8_flag=0;

openair1/PHY/CODING/3gpplte_turbo_decoder_sse_16bit.c

@@ -1105,7 +1105,7 @@ uint8_t phy_threegpplte_turbo_decoder16(int16_t *y,
   uint8_t temp;
 #if defined(__x86_64__) || defined(__i386__)
   __m128i *yp128;
-  __m128i tmp, zeros=_mm_setzero_si128();
+  __m128i tmp={0}, zeros=_mm_setzero_si128();
   __m128i tmpe;
 #elif defined(__arm__)
   int16x8_t *yp128;

openair1/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c

@@ -819,7 +819,7 @@ uint8_t phy_threegpplte_turbo_decoder8(int16_t *y,
 #if defined(__x86_64__) || defined(__i386__)
   __m128i *yp128;
   __m128i tmp128[(n+8)>>3];
-  __m128i tmp, zeros=_mm_setzero_si128();
+  __m128i tmp={0}, zeros=_mm_setzero_si128();
 #elif defined(__arm__)
   int8x16_t *yp128;
   int8x16_t tmp128[(n+8)>>3];

openair1/PHY/INIT/nr_init_ue.c

@@ -181,6 +181,16 @@ int init_nr_ue_signal(PHY_VARS_NR_UE *ue,
     }
   }
 
+  /////////////////////////PUCCH init/////////////////////////
+  ///////////
+  for (th_id = 0; th_id < RX_NB_TH_MAX; th_id++) {
+    for (gNB_id = 0; gNB_id < ue->n_connected_gNB; gNB_id++) {
+      ue->pucch_vars[th_id][gNB_id] = (NR_UE_PUCCH *)malloc16(sizeof(NR_UE_PUCCH));
+      for (i=0; i<2; i++)
+        ue->pucch_vars[th_id][gNB_id]->active[i] = false;
+    }
+  }
+
   ///////////
   ////////////////////////////////////////////////////////////////////////////////////////////
 

openair1/PHY/INIT/nr_parms.c

@@ -198,9 +198,8 @@ int nr_init_frame_parms(nfapi_nr_config_request_scf_t* cfg,
 
   fp->slots_per_frame = 10* fp->slots_per_subframe;
 
-  fp->nb_antenna_ports_gNB = 1;                                   // It corresponds to the number of common antenna ports
   fp->nb_antennas_rx = cfg->carrier_config.num_rx_ant.value;      // It denotes the number of rx antennas at gNB
-  fp->nb_antennas_tx = cfg->carrier_config.num_tx_ant.value;      // It corresponds to pdsch_AntennaPorts
+  fp->nb_antennas_tx = cfg->carrier_config.num_tx_ant.value;      // It corresponds to pdsch_AntennaPorts (logical antenna ports)
 
   fp->symbols_per_slot = ((Ncp == NORMAL)? 14 : 12); // to redefine for different slot formats
   fp->samples_per_subframe_wCP = fp->ofdm_symbol_size * fp->symbols_per_slot * fp->slots_per_subframe;

openair1/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c

@@ -35,7 +35,6 @@ static int16_t ru_90c[2*128] = {32767, 0,32766, -402,32758, -804,32746, -1206,32
 #define SCALE 0x3FFF
 
 static const short conjugate[8]__attribute__((aligned(16))) = {-1,1,-1,1,-1,1,-1,1};
-//static const short conjugate2[8]__attribute__((aligned(16))) = {1,-1,1,-1,1,-1,1,-1};
 
 extern unsigned short dftsizes[34];
 extern int16_t *ul_ref_sigs_rx[30][2][34];

openair1/PHY/NR_ESTIMATION/nr_ul_estimation.h

@@ -51,7 +51,7 @@ void dump_nr_I0_stats(FILE *fd,PHY_VARS_gNB *gNB);
 
 void gNB_I0_measurements(PHY_VARS_gNB *gNB,int first_symb,int num_symb);
 
-void nr_gnb_measurements(PHY_VARS_gNB *gNB, uint8_t ulsch_id, unsigned char harq_pid, unsigned char symbol);
+void nr_gnb_measurements(PHY_VARS_gNB *gNB, uint8_t ulsch_id, unsigned char harq_pid, unsigned char symbol, uint8_t nrOfLayers);
 
 int nr_est_timing_advance_pusch(PHY_VARS_gNB* phy_vars_gNB, int UE_id);