build_helper 22.7 KB
Newer Older
1 2 3 4 5
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
6
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */

22
# file build_helper
thomasl's avatar
thomasl committed
23
# brief
24
# authors Laurent Thomas, Lionel GAUTHIER
thomasl's avatar
thomasl committed
25 26
#
#######################################
27 28 29 30 31 32 33
if [ ! -f /etc/os-release ]; then
  echo "No /etc/os-release file found. You're likely on an unsupported distro."
  exit -1
fi
OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
case "$OS_DISTRO" in
34 35 36 37 38
  fedora) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake" ;;
  rhel)   OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
  centos) OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
  debian) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
  ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
39 40 41 42
esac
KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)

43
SUDO='sudo -E'
thomasl's avatar
thomasl committed
44

45 46 47 48 49 50 51
###############################
## echo and  family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
52
blue='\E[1;34m'
53 54 55 56 57 58
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1

59
cecho()  {
60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76
    # Color-echo
    # arg1 = message
    # arg2 = color
    local default_msg="No Message."
    message=${1:-$default_msg}
    color=${2:-$green}
    [ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
    echo -e "$message"
    return
}

echo_error()   { cecho "$*" $red          ;}
echo_fatal()   { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow       ;}
echo_success() { cecho "$*" $green        ;}
echo_info()    { cecho "$*" $blue         ;}

77 78 79
########################
# distribution helpers #
########################
80

81 82 83 84
# This function return a string to identify the distribution we are running
# If we can't check the distribution, it returns "Unknown"
# This function return always true as exit code by design
# Examples:
85 86
#   ubuntu16.04
#   debian8.5
87
get_distribution_release() {
88 89
    if [[ ! -z "$OS_DISTRO$OS_RELEASE" ]]; then
        echo "$OS_DISTRO$OS_RELEASE"
90 91 92 93
    else
        echo Unknown
    fi
}
94

95 96 97
check_supported_distribution() {
    local distribution=$(get_distribution_release)
    case "$distribution" in
98
        "ubuntu18.04") return 0 ;;
99 100
        "ubuntu17.10") return 0 ;;
        "ubuntu17.04") return 0 ;;
101 102 103 104
        "ubuntu16.04") return 0 ;;
        "ubuntu14.04") return 0 ;;
        "fedora24")    return 0 ;;
        "rhel7")       return 0 ;;
Raymond Knopp's avatar
Raymond Knopp committed
105
        "rhel7.5")       return 0 ;;
106
        "centos7")     return 0 ;;
107 108 109
    esac
    return 1
}
110

111 112 113 114 115 116 117 118 119 120 121
##################
# Error handlers #
##################

handler_EXIT() {
	local exit_code=$?
    [ "$exit_code" -eq 0 ] || echo_error "build have failed"
	exit $exit_code
}

trap handler_EXIT EXIT
122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148

###########################
# Cleaners
###########################

clean_kernel() {
    $SUDO modprobe ip_tables
    $SUDO modprobe x_tables
    $SUDO iptables -P INPUT ACCEPT
    $SUDO iptables -F INPUT
    $SUDO iptables -P OUTPUT ACCEPT
    $SUDO iptables -F OUTPUT
    $SUDO iptables -P FORWARD ACCEPT
    $SUDO iptables -F FORWARD
    $SUDO iptables -t nat -F
    $SUDO iptables -t mangle -F
    $SUDO iptables -t filter -F
    $SUDO iptables -t raw -F
    echo_info "Flushed iptables"
    $SUDO rmmod nasmesh > /dev/null 2>&1
    $SUDO rmmod oai_nw_drv  > /dev/null 2>&1
    $SUDO rmmod openair_rf > /dev/null 2>&1
    $SUDO rmmod ue_ip > /dev/null 2>&1
    echo_info "removed drivers from kernel"
}

clean_all_files() {
149
 set_openair_env
150
 dir=$OPENAIR_DIR/cmake_targets
151
 rm -rf $dir/log $OPENAIR_DIR/targets/bin/*
152 153
 rm -rf $dir/lte_build_oai $dir/lte-simulators/build
 rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
154
 rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build
155 156 157 158 159 160
}

###################################
# Compilers
###################################

161 162 163 164 165 166 167 168 169 170 171 172 173 174
#check_warnings:
#    print error message if the compilation had warnings
#argument:
#    $1: log file
check_warnings() {
  #we look for 'warning:' in the compilation log file
  #this is how gcc starts a warning
  #this is not perfect, we may get false positive
  warning_count=`grep "warning:" "$1"|wc -l`
  if [ $warning_count -gt 0 ]; then
    echo_error "WARNING: $warning_count warnings. See $1"
  fi
}

thomasl's avatar
thomasl committed
175
compilations() {
thomasl's avatar
thomasl committed
176
  cd $OPENAIR_DIR/cmake_targets/$1/build
177
  set +e
thomasl's avatar
thomasl committed
178 179
  {
    rm -f $3
180 181 182 183 184 185
    if [ "$VERBOSE_COMPILE" == "1" ]; then
       make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
    else
       make -j`nproc` $2
    fi

thomasl's avatar
thomasl committed
186
  } > $dlog/$2.$REL.txt 2>&1
187
  set -e
188
  echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
189
  if [ -s $3 ] ; then
190
     cp $3 $4
thomasl's avatar
thomasl committed
191
     echo_success "$2 compiled"
192
     check_warnings "$dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
193
  else
thomasl's avatar
thomasl committed
194
     echo_error "$2 compilation failed"
195
     exit 1
thomasl's avatar
thomasl committed
196 197 198
  fi
}

199 200 201 202
############################################
# External packages installers
############################################

203
install_protobuf_from_source(){
204 205 206
    protobuf_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_install_log.txt
    echo_info "\nInstalling Google Protobuf from sources. The log file for Protobuf installation is here: $protobuf_install_log "
    (
207 208
    cd /tmp
    echo "Downloading protobuf"
209 210 211 212 213 214
    #rm -rf /tmp/protobuf-2.6.1.tar.gz* /tmp/protobuf-2.6.1
    #wget https://github.com/google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
    #tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner
    #cd protobuf-2.6.1/
    rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
    wget https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
215
    tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $(groups | cut -d" " -f1) --no-same-owner
216
    cd protobuf-3.3.0/
217 218 219 220 221
    ./configure
    echo "Compiling protobuf"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
222
    ) >& $protobuf_install_log
223 224 225
}

install_protobuf_c_from_source(){
226 227 228
    protobuf_c_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_c_install_log.txt
    echo_info "\nInstalling Google Protobuf_C from sources. The log file for Protobuf_C installation is here: $protobuf_c_install_log "
    (
229 230 231
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
        export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
    fi
232 233 234 235 236
    cd /tmp
    echo "Downloading protobuf-c"
    rm -rf /tmp/protobuf-c
    git clone https://github.com/protobuf-c/protobuf-c.git
    cd protobuf-c
237
	git checkout 2a46af42784abf86804d536f6e0122d47cfeea45
238 239 240 241 242 243
    ./autogen.sh
    ./configure
    echo "Compiling protobuf-c"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
244
    ) >& $protobuf_c_install_log
245 246
}

247 248 249 250 251 252 253
install_usrp_uhd_driver_from_source(){
    uhd_install_log=$OPENAIR_DIR/cmake_targets/log/uhd_install_log.txt
    echo_info "\nInstalling UHD driver from sources. The log file for UHD driver installation is here: $uhd_install_log "
    (
    cd /tmp
    echo "Downloading UHD driver"
    rm -rf /tmp/uhd
Cedric Roux's avatar
Cedric Roux committed
254
    git clone https://github.com/EttusResearch/uhd.git
255 256 257 258 259 260
    cd uhd
    git checkout tags/release_003_010_001_001
    mkdir -p host/build
    cd host/build
    $CMAKE ../
    echo "Compiling UHD"
Cedric Roux's avatar
Cedric Roux committed
261
    make -j`nproc`
262 263 264 265 266 267
    make test
    $SUDO make install
    $SUDO ldconfig
    ) >& $uhd_install_log
}

thomasl's avatar
thomasl committed
268
check_install_usrp_uhd_driver(){
269
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
270
        #first we remove old installation
271
        $SUDO apt-get remove -y uhd || true
272
        $SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y || true
thomasl's avatar
thomasl committed
273
        v=$(lsb_release -cs)
274
        $SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
275
        # The new USRP repository
276
        # Raphael Defosseux: Adding a loop on adding PPA because in CI the gpg key retrieve may
277 278 279 280 281 282 283 284 285 286 287 288 289 290 291
        # timeout due to proxy / network latencies in Eurecom on VM
        echo_info "\nAdding PPA repository ettusresearch/uhd\n"
        x=0
        while [ $x -le 5 ]
        do
            if $SUDO add-apt-repository ppa:ettusresearch/uhd -y
            then
                echo_info "add-apt-repository successful\n"
                break
            else
                echo_info "add-apt-repository failed, retrying...\n"
                sleep 30
            fi
            x=$((x + 1))
        done
thomasl's avatar
thomasl committed
292
        $SUDO apt-get update
293 294
        $SUDO apt-get -y --allow-unauthenticated install  python python-tk libboost-all-dev libusb-1.0-0-dev
        $SUDO apt-get -y --allow-unauthenticated install libuhd-dev libuhd003 uhd-host
295
    elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
296
        $SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
Cedric Roux's avatar
Cedric Roux committed
297
        $SUDO pip install requests
298 299 300
        if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
            # until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
            $SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
Cedric Roux's avatar
Cedric Roux committed
301
            install_usrp_uhd_driver_from_source
302 303 304
        else
            $SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
        fi
305
    fi
306 307 308
}

install_usrp_uhd_driver() {
309
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
310 311 312
        # We move uhd-host apart because it depends on linux kernel version
        # On newer kernels, it fails to install
        $SUDO apt-get -y install uhd-host
313 314 315 316 317 318
    fi
    if [ -z $1 ]; then
      $SUDO uhd_images_downloader
    else
      $SUDO uhd_images_downloader -i $1
    fi
thomasl's avatar
thomasl committed
319
}
320

321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347
install_bladerf_driver_from_source(){
    bladerf_install_log=$OPENAIR_DIR/cmake_targets/log/bladerf_install_log.txt
    echo_info "\nInstalling BladeRF driver from sources. The log file for BladeRF driver installation is here: $bladerf_install_log "
    (
    cd /tmp
    echo "Downloading BladeRF driver"
    rm -rf /tmp/bladeRF
    git clone https://github.com/Nuand/bladeRF.git
    cd bladeRF
    git checkout tags/2016.06
    mkdir -p build
    cd build
    $CMAKE ../
    echo "Compiling BladeRF driver"
    make
    $SUDO make install
    $SUDO ldconfig
    echo "Downloading FPGA and firmware images"
    cd /tmp/bladeRF
    wget https://www.nuand.com/fx3/bladeRF_fw_latest.img
    wget https://www.nuand.com/fpga/hostedx40-latest.rbf
    sudo mkdir -p /usr/share/Nuand/bladeRF
    sudo mv bladeRF_fw_latest.img /usr/share/Nuand/bladeRF/bladeRF_fw.img
    sudo mv hostedx40-latest.rbf /usr/share/Nuand/bladeRF/hostedx40.rbf
    ) >& $bladerf_install_log
}

348
check_install_bladerf_driver(){
349 350 351 352 353 354 355
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
        if [ "$(get_distribution_release)" == "ubuntu14.04" ] ; then
            $SUDO add-apt-repository -y ppa:bladerf/bladerf
            $SUDO apt-get update
        fi
        $SUDO apt-get install -y --allow-unauthenticated  bladerf libbladerf-dev
        $SUDO apt-get install -y --allow-unauthenticated bladerf-firmware-fx3
356
        $SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40
357 358
   elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
        install_bladerf_driver_from_source
359 360 361
   else
        echo_error "BladeRF Installer for OAI does not support automatic build. Install BladeRF compiling sources manually from BladeRF website"
   fi
362 363 364 365
}

flash_firmware_bladerf() {
	$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
366
}
thomasl's avatar
thomasl committed
367

368 369 370 371 372 373 374 375 376
check_install_lmssdr_driver(){
	if ( [ -d "/usr/local/include/lime" ] &&
             [ -f "/usr/local/include/lime/LimeSuite.h" ] )
	then
  		echo_success "Found lmssdr drivers and tools installed from source"
        else
                echo_error "lmssdr support implies installing lmssdr drivers and tools" \
                           " from sources. check:"
                echo_info "https://open-cells.com/index.php/2017/05/10/limesdr-installation/"
377
                echo_fatal "Cannot compile lmssdr device"
378 379 380 381 382
	fi


}

thomasl's avatar
thomasl committed
383
check_install_additional_tools (){
384 385
  $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
386
    PACKAGE_LIST="\
thomasl's avatar
thomasl committed
387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402
	check \
	dialog \
	dkms \
	gawk \
	libboost-all-dev \
	libpthread-stubs0-dev \
	openvpn \
	pkg-config \
	python-dev  \
	python-pexpect \
	sshfs \
	swig  \
	tshark \
	uml-utilities \
	unzip  \
	valgrind  \
403
	vlan	  \
404
	ctags \
405 406
        ntpdate \
        iperf3 \
Rohit Gupta's avatar
Rohit Gupta committed
407 408 409
        android-tools-adb \
	wvdial \
        python-numpy \
410 411 412 413 414
        sshpass \
        nscd \
        bc \
        ntp \
        python-scipy \
415
        python-matplotlib"
416
  elif [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
417
    PACKAGE_LIST="\
418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
441 442 443
      python-netifaces \
      scipy \
      python-matplotlib"
444
  elif [[ "$OS_DISTRO" == "fedora" ]]; then
445
    PACKAGE_LIST=" \
446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      python-pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      python-numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
469 470 471 472 473
      python-netifaces \
      python2-scipy \
      python2-matplotlib"
  fi
    $SUDO $INSTALLER install -y $PACKAGE_LIST
474

475
    $SUDO rm -fr /opt/ssh
476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491
    $SUDO GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/ssh.git /opt/ssh

  #The packages below are already installed for Redhat distros (RHEL, CentOS, Fedora)
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
    $SUDO pip install paramiko
    $SUDO pip install pyroute2 colorama
    log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
    echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
    (
    $SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
    wget -P /tmp  https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
    tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
    cd /tmp/netifaces-0.10.4
    $SUDO python setup.py install
    cd -
    ) >& $log_netiface
492
  fi
thomasl's avatar
thomasl committed
493 494 495
}

check_install_oai_software() {
496
    local specific_packages=""
497 498 499 500
    if ! check_supported_distribution; then
        echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
        exit 1
    fi
501 502
    $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
503 504
    local LAPACK_LIBNAME="liblapack.so"
    local LAPACK_TARGET="/usr/lib/atlas-base/atlas/liblapack.so"
505
    $SUDO apt install -y software-properties-common
506
    case "$(get_distribution_release)" in
507
        "ubuntu14.04")
Cedric Roux's avatar
Cedric Roux committed
508
            specific_packages="libtasn1-3-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
509 510 511
            # For iperf3
            $SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
            $SUDO apt-get update
512
            ;;
513
        "ubuntu16.04")
Cedric Roux's avatar
Cedric Roux committed
514
            specific_packages="libtasn1-6-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
515 516
            ;;
        "ubuntu17.04")
Cedric Roux's avatar
Cedric Roux committed
517
            specific_packages="libtasn1-6-dev libgnutls28-dev libatlas-dev iproute libconfig8-dev"
518 519
            ;;
        "ubuntu17.10")
Cedric Roux's avatar
Cedric Roux committed
520
            specific_packages="libtasn1-6-dev libgnutls28-dev iproute libconfig8-dev"
521 522 523 524
            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
            ;;
        "ubuntu18.04")
Cedric Roux's avatar
Cedric Roux committed
525
            specific_packages="libtasn1-6-dev libgnutls28-dev iproute2 libconfig-dev"
526 527
            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
528
            ;;
529
    esac
530
    $SUDO apt-get install -y \
531
    $specific_packages \
532
	autoconf  \
thomasl's avatar
thomasl committed
533 534 535 536 537 538
	automake  \
	bison  \
	build-essential \
	cmake \
	cmake-curses-gui  \
	doxygen \
539 540
	doxygen-gui \
	texlive-latex-base \
thomasl's avatar
thomasl committed
541 542
	ethtool \
	flex  \
543 544
	gdb  \
	git \
thomasl's avatar
thomasl committed
545 546 547 548 549 550 551 552
	graphviz \
	gtkwave \
	guile-2.0-dev  \
	iperf \
	iptables \
	iptables-dev \
	libatlas-base-dev \
	libblas-dev \
553 554
  liblapack-dev\
  liblapacke-dev\
555
	libffi-dev \
thomasl's avatar
thomasl committed
556 557 558 559 560 561
	libforms-bin \
	libforms-dev \
	libgcrypt11-dev \
	libgmp-dev \
	libgtk-3-dev \
	libidn2-0-dev  \
562
	libidn11-dev \
thomasl's avatar
thomasl committed
563
	libmysqlclient-dev  \
564
	libpython2.7-dev \
thomasl's avatar
thomasl committed
565 566 567 568 569 570 571
	libsctp1  \
	libsctp-dev  \
	libssl-dev  \
	libtool  \
	libusb-1.0-0-dev \
	libxml2 \
	libxml2-dev  \
572
	libxslt1-dev \
573 574
	mscgen  \
	octave-signal \
thomasl's avatar
thomasl committed
575 576 577 578
	openssh-client \
	openssh-server \
	openssl \
	python  \
579
	subversion \
580 581 582
	xmlstarlet \
	python-pip \
	pydb \
583
	libyaml-dev \
584
	wget \
585 586
	libxpm-dev \
        libboost-all-dev
Rohit Gupta's avatar
Rohit Gupta committed
587

588
    $SUDO update-alternatives --set "$LAPACK_LIBNAME" "$LAPACK_TARGET"
589

590
    $SUDO apt-get install -y nettle-dev nettle-bin
591 592 593 594 595 596 597 598
  elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
      if rpm -q epel-release > /dev/null; then
        echo "EPEL repos already present. Good."
      else
        echo "EPEL repos not present. Installing them."
        $SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
      fi
Cedric Roux's avatar
Cedric Roux committed
599
      $SUDO $INSTALLER install -y python-epdb vim-common
600 601 602
    else
      $SUDO $INSTALLER install -y mscgen pydb
    fi
603

604 605 606
    $SUDO $INSTALLER install -y \
      autoconf \
      automake \
607
      bc \
608
      bison \
609
      $CMAKE \
610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645
      doxygen \
      ethtool \
      flex \
      gdb \
      git \
      graphviz \
      gtkwave \
      guile-devel \
      iperf \
      iproute \
      iptables \
      iptables-devel \
      atlas-devel \
      blas-devel \
      libconfig-devel \
      libffi-devel \
      xforms \
      xforms-devel \
      libgcrypt-devel \
      gmp-devel \
      gtk3-devel \
      libidn2-devel  \
      libidn-devel \
      mariadb-devel \
      lksctp-tools \
      lksctp-tools-devel \
      openssl-devel \
      libtasn1 \
      libtool \
      libusb-devel \
      libxml2 \
      libxml2-devel \
      libxslt-devel \
      openssh-clients \
      openssh-server \
      openssl \
646 647
      patch \
      psmisc \
648 649 650 651 652 653
      python \
      subversion \
      xmlstarlet \
      python-pip \
      wget \
      kernel-headers \
654
      kernel-devel \
655
      nettle-devel \
656 657 658 659 660
      gnutls-devel \
      libXpm-devel \
      lapack \
      lapack-devel \
      blas \
Cedric Roux's avatar
Cedric Roux committed
661 662
      blas-devel \
      libyaml-devel
663 664
  fi

665
    install_asn1c_from_source $1
666 667
    $SUDO rm -fr /opt/ssh
    $SUDO git clone https://gist.github.com/2190472.git /opt/ssh
thomasl's avatar
thomasl committed
668 669
}

thomasl's avatar
thomasl committed
670
install_asn1c_from_source(){
671 672
    asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
    echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
673
    (
674
    $SUDO rm -rf /tmp/asn1c
675
    # GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
Cedric Roux's avatar
Cedric Roux committed
676
    git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
677
    cd /tmp/asn1c
Cedric Roux's avatar
Cedric Roux committed
678 679 680
    # better to use a given commit than a branch in case the branch
    # is updated and requires modifications in the source of OAI
    #git checkout velichkov_s1ap_plus_option_group
681
    git checkout 73d6b23dcec9ab36605b4af884143824392134c1
682
    autoreconf -iv
thomasl's avatar
thomasl committed
683
    ./configure
684
    make -j`nproc`
685
    $SUDO make install
Rohit Gupta's avatar
Rohit Gupta committed
686
    cd -
687
    $SUDO ldconfig
688
    ) > $asn1_install_log 2>&1
thomasl's avatar
thomasl committed
689 690 691
}

#################################################
692
# 2. compile
thomasl's avatar
thomasl committed
693
################################################
thomasl's avatar
thomasl committed
694

thomasl's avatar
thomasl committed
695
install_nas_tools() {
696
  if [ ! -f .ue.nvram0 ]; then
Lionel Gauthier's avatar
Lionel Gauthier committed
697
    echo_success "generate .ue_emm.nvram .ue.nvram"
698
    ./nvram --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
699
  else
700
    [ ./nvram -nt .ue.nvram0 -o ./nvram -nt .ue_emm.nvram0 ] && ./nvram --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
701
  fi
thomasl's avatar
thomasl committed
702

703
  if [ ! -f .usim.nvram0 ]; then
Lionel Gauthier's avatar
Lionel Gauthier committed
704
    echo_success "generate .usim.nvram"
705
    ./usim --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
706
  else
707
    [ ./usim -nt .usim.nvram0 ] && ./usim --gen -c $1 -o $2
Lionel Gauthier's avatar
Lionel Gauthier committed
708
  fi
thomasl's avatar
thomasl committed
709 710

}
711

thomasl's avatar
thomasl committed
712 713 714 715 716 717 718 719 720

################################
# set_openair_env
###############################
set_openair_env(){
    fullpath=`readlink -f $BASH_SOURCE`
    [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
    openair_path=${fullpath%/cmake_targets/*}
    openair_path=${openair_path%/targets/*}
721
    openair_path=${openair_path%/openair[123]/*}
thomasl's avatar
thomasl committed
722 723 724 725 726 727 728
    export OPENAIR_DIR=$openair_path
    export OPENAIR1_DIR=$openair_path/openair1
    export OPENAIR2_DIR=$openair_path/openair2
    export OPENAIR3_DIR=$openair_path/openair3
    export OPENAIR_TARGETS=$openair_path/targets
}

729 730 731 732 733 734 735 736
################################
# Function to killall the subprocesses when Ctrl-C Key is hit
###############################
function handle_ctrl_c(){
CURPID=$$
ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
737
echo_info "** Calling sync now..."
738
sync
739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755
while true
do
        FORLOOP=FALSE
        # Get all the child process id
        for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'`
        do
                if [ $i -ne $CURPID ] ; then
                        procid[$arraycounter]=$i
                        arraycounter=`expr $arraycounter + 1`
                        ppid=$i
                        FORLOOP=TRUE
                fi
        done
        if [ "$FORLOOP" = "FALSE" ] ; then
           arraycounter=`expr $arraycounter - 1`
           ## We want to kill child process id first and then parent id's
           while [ $arraycounter -ne 0 ]
756
           do
757 758 759 760
             echo "first we send ctrl-c to program"
             $SUDO kill -INT "${procid[$arraycounter]}"
             sleep 5
             echo "Now we force kill if that didn't work"
761 762 763 764 765 766 767 768 769
             $SUDO kill -9 "${procid[$arraycounter]}" >/dev/null
             arraycounter=`expr $arraycounter - 1`
           done
         exit
        fi
done
}


770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786
# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {

local  ip=$1
local  stat=1

if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
    OIFS=$IFS
    IFS='.'
    ip=($ip)
    IFS=$OIFS
    [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
        && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
    stat=$?
fi

return $stat
Rohit Gupta's avatar
Rohit Gupta committed
787
}