Skip to content

O
OpenXG-RAN
Commit 36bbd2a0 authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options

adapting config file for band 261

parent 3b569941
Hide whitespace changes
Inline Side-by-side
Showing with 43 additions and 15 deletions
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band261.tm1.32PRB.usrpn300.conf
View file @ 36bbd2a0
......@@ -13,7 +13,7 @@ gNBs =
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 600;
tracking_area_code = 1;
plmn_list = ({mcc = 311; mnc = 480; mnc_length = 3;});
......@@ -23,6 +23,8 @@ gNBs =
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
servingCellConfigCommon = (
{
......@@ -71,6 +73,11 @@ gNBs =
initialDLBWPmappingType_2 = 0;
#this is SS=1,L=12
initialDLBWPstartSymbolAndLength_2 = 54;
initialDLBWPk0_3 = 0;
initialDLBWPmappingType_3 = 0;
#this is SS=1,L=4 //5 (4 is for 43, 5 is for 57)
initialDLBWPstartSymbolAndLength_3 = 57; //43; //57;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 261;
......@@ -89,7 +96,7 @@ gNBs =
initialULBWPsubcarrierSpacing = 3;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
prach_ConfigurationIndex = 52;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
......@@ -103,12 +110,12 @@ gNBs =
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
ra_ResponseWindow = 7;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#0=oneeighth,1=onefourth,2=half,3=one,4=two,5=four,6=eight,7=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 7;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
......@@ -119,7 +126,7 @@ gNBs =
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
msg1_SubcarrierSpacing = 3,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
......@@ -135,6 +142,10 @@ gNBs =
# this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
initialULBWPk2_2 = 7;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
......@@ -148,7 +159,7 @@ gNBs =
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 3;
ssb_PositionsInBurst_Bitmap = 0x100000001L;
ssb_PositionsInBurst_Bitmap = 0x0001000100010001L;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
......@@ -170,11 +181,11 @@ gNBs =
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 5;
nrofDownlinkSlots = 10;
nrofDownlinkSymbols = 0;
nrofUplinkSlots = 10;
nrofUplinkSymbols = 0;
dl_UL_TransmissionPeriodicity = 3;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = 10;
}
......@@ -192,21 +203,36 @@ gNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "192.168.18.99";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
///X2
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "192.168.18.199";
ipv6 = "192:168:30::17";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.18.198/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.18.198/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "192.168.18.198/24";
GNB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
......@@ -239,6 +265,8 @@ RUs = (
eNB_instances = [0];
sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2";
if_freq = 5124520000L;
clock_src = "external";
time_src = "external";
}
);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment