usrp_lib.cpp 49.3 KB
Newer Older
1 2 3 4 5
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
6
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

Raymond Knopp's avatar
 
Raymond Knopp committed
22 23
/** usrp_lib.cpp
 *
24
 * \author: HongliangXU : hong-liang-xu@agilent.com
Raymond Knopp's avatar
 
Raymond Knopp committed
25 26 27 28 29 30 31 32
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
33
#include <uhd/version.hpp>
Raymond Knopp's avatar
 
Raymond Knopp committed
34 35
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
Florian Kaltenberger's avatar
Florian Kaltenberger committed
36 37
#include <boost/thread.hpp>
#include <boost/format.hpp>
Raymond Knopp's avatar
 
Raymond Knopp committed
38 39 40 41
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
42
#include <time.h>
43
#include "UTIL/LOG/log_extern.h"
Raymond Knopp's avatar
 
Raymond Knopp committed
44
#include "common_lib.h"
laurent's avatar
laurent committed
45 46
#include "assertions.h"

47 48 49
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
laurent's avatar
laurent committed
50

51 52 53
#ifdef __AVX2__
#  include <immintrin.h>
#endif
54

55 56 57 58
#ifdef __arm__
#  include <arm_neon.h>
#endif

59 60 61 62
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

laurent's avatar
laurent committed
63 64
/*! \brief USRP Configuration */
typedef struct {
Raymond Knopp's avatar
 
Raymond Knopp committed
65

laurent's avatar
laurent committed
66 67 68 69 70
    // --------------------------------
    // variables for USRP configuration
    // --------------------------------
    //! USRP device pointer
    uhd::usrp::multi_usrp::sptr usrp;
laurent's avatar
laurent committed
71 72 73 74 75 76 77 78 79 80 81

    //create a send streamer and a receive streamer
    //! USRP TX Stream
    uhd::tx_streamer::sptr tx_stream;
    //! USRP RX Stream
    uhd::rx_streamer::sptr rx_stream;

    //! USRP TX Metadata
    uhd::tx_metadata_t tx_md;
    //! USRP RX Metadata
    uhd::rx_metadata_t rx_md;
Raymond Knopp's avatar
 
Raymond Knopp committed
82

laurent's avatar
laurent committed
83 84
    //! Sampling rate
    double sample_rate;
Raymond Knopp's avatar
 
Raymond Knopp committed
85

laurent's avatar
laurent committed
86 87
    //! TX forward samples. We use usrp_time_offset to get this value
    int tx_forward_nsamps; //166 for 20Mhz
88

laurent's avatar
laurent committed
89 90 91 92 93 94 95 96
    // --------------------------------
    // Debug and output control
    // --------------------------------
    int num_underflows;
    int num_overflows;
    int num_seq_errors;
    int64_t tx_count;
    int64_t rx_count;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
97 98
    int wait_for_first_pps;
    int use_gps;
laurent's avatar
laurent committed
99 100
    //! timestamp of RX packet
    openair0_timestamp rx_timestamp;
Raymond Knopp's avatar
 
Raymond Knopp committed
101

laurent's avatar
laurent committed
102
} usrp_state_t;
Raymond Knopp's avatar
 
Raymond Knopp committed
103

Florian Kaltenberger's avatar
Florian Kaltenberger committed
104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199
//void print_notes(void)
//{
    // Helpful notes
  //  std::cout << boost::format("**************************************Helpful Notes on Clock/PPS Selection**************************************\n");
  //  std::cout << boost::format("As you can see, the default 10 MHz Reference and 1 PPS signals are now from the GPSDO.\n");
  //  std::cout << boost::format("If you would like to use the internal reference(TCXO) in other applications, you must configure that explicitly.\n");
  //  std::cout << boost::format("You can no longer select the external SMAs for 10 MHz or 1 PPS signaling.\n");
  //  std::cout << boost::format("****************************************************************************************************************\n");
//}

static int sync_to_gps(openair0_device *device)
{
    uhd::set_thread_priority_safe();

    //std::string args;

    //Set up program options
    //po::options_description desc("Allowed options");
    //desc.add_options()
    //("help", "help message")
    //("args", po::value<std::string>(&args)->default_value(""), "USRP device arguments")
    //;
    //po::variables_map vm;
    //po::store(po::parse_command_line(argc, argv, desc), vm);
    //po::notify(vm);

    //Print the help message
    //if (vm.count("help"))
    //{
      //  std::cout << boost::format("Synchronize USRP to GPS %s") % desc << std::endl;
      // return EXIT_FAILURE;
    //}

    //Create a USRP device
    //std::cout << boost::format("\nCreating the USRP device with: %s...\n") % args;
    //uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
    //std::cout << boost::format("Using Device: %s\n") % usrp->get_pp_string();
 
    usrp_state_t *s = (usrp_state_t*)device->priv;    

    try
    {
        size_t num_mboards = s->usrp->get_num_mboards();
        size_t num_gps_locked = 0;
        for (size_t mboard = 0; mboard < num_mboards; mboard++)
        {
            std::cout << "Synchronizing mboard " << mboard << ": " << s->usrp->get_mboard_name(mboard) << std::endl;

            //Set references to GPSDO
            s->usrp->set_clock_source("gpsdo", mboard);
            s->usrp->set_time_source("gpsdo", mboard);

            //std::cout << std::endl;
            //print_notes();
            //std::cout << std::endl;

            //Check for 10 MHz lock
            std::vector<std::string> sensor_names = s->usrp->get_mboard_sensor_names(mboard);
            if(std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end())
            {
                std::cout << "Waiting for reference lock..." << std::flush;
                bool ref_locked = false;
                for (int i = 0; i < 30 and not ref_locked; i++)
                {
                    ref_locked = s->usrp->get_mboard_sensor("ref_locked", mboard).to_bool();
                    if (not ref_locked)
                    {
                        std::cout << "." << std::flush;
                        boost::this_thread::sleep(boost::posix_time::seconds(1));
                    }
                }
                if(ref_locked)
                {
                    std::cout << "LOCKED" << std::endl;
                } else {
                    std::cout << "FAILED" << std::endl;
                    std::cout << "Failed to lock to GPSDO 10 MHz Reference. Exiting." << std::endl;
                    exit(EXIT_FAILURE);
                }
            }
            else
            {
                std::cout << boost::format("ref_locked sensor not present on this board.\n");
            }

            //Wait for GPS lock
            bool gps_locked = s->usrp->get_mboard_sensor("gps_locked", mboard).to_bool();
            if(gps_locked)
            {
                num_gps_locked++;
                std::cout << boost::format("GPS Locked\n");
            }
            else
            {
                std::cerr << "WARNING:  GPS not locked - time will not be accurate until locked" << std::endl;
            }
Raymond Knopp's avatar
 
Raymond Knopp committed
200

Florian Kaltenberger's avatar
Florian Kaltenberger committed
201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268
            //Set to GPS time
            uhd::time_spec_t gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
            //s->usrp->set_time_next_pps(gps_time+1.0, mboard);
            s->usrp->set_time_next_pps(uhd::time_spec_t(0.0));

            //Wait for it to apply
            //The wait is 2 seconds because N-Series has a known issue where
            //the time at the last PPS does not properly update at the PPS edge
            //when the time is actually set.
            boost::this_thread::sleep(boost::posix_time::seconds(2));

            //Check times
            gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
            uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps(mboard);
            std::cout << "USRP time: " << (boost::format("%0.9f") % time_last_pps.get_real_secs()) << std::endl;
            std::cout << "GPSDO time: " << (boost::format("%0.9f") % gps_time.get_real_secs()) << std::endl;
            //if (gps_time.get_real_secs() == time_last_pps.get_real_secs())
            //    std::cout << std::endl << "SUCCESS: USRP time synchronized to GPS time" << std::endl << std::endl;
            //else
            //    std::cerr << std::endl << "ERROR: Failed to synchronize USRP time to GPS time" << std::endl << std::endl;
        }

        if (num_gps_locked == num_mboards and num_mboards > 1)
        {
            //Check to see if all USRP times are aligned
            //First, wait for PPS.
            uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps();
            while (time_last_pps == s->usrp->get_time_last_pps())
            {
                boost::this_thread::sleep(boost::posix_time::milliseconds(1));
            }

            //Sleep a little to make sure all devices have seen a PPS edge
            boost::this_thread::sleep(boost::posix_time::milliseconds(200));

            //Compare times across all mboards
            bool all_matched = true;
            uhd::time_spec_t mboard0_time = s->usrp->get_time_last_pps(0);
            for (size_t mboard = 1; mboard < num_mboards; mboard++)
            {
                uhd::time_spec_t mboard_time = s->usrp->get_time_last_pps(mboard);
                if (mboard_time != mboard0_time)
                {
                    all_matched = false;
                    std::cerr << (boost::format("ERROR: Times are not aligned: USRP 0=%0.9f, USRP %d=%0.9f")
                                  % mboard0_time.get_real_secs()
                                  % mboard
                                  % mboard_time.get_real_secs()) << std::endl;
                }
            }
            if (all_matched)
            {
                std::cout << "SUCCESS: USRP times aligned" << std::endl << std::endl;
            } else {
                std::cout << "ERROR: USRP times are not aligned" << std::endl << std::endl;
            }
        }
    }
    catch (std::exception& e)
    {
        std::cout << boost::format("\nError: %s") % e.what();
        std::cout << boost::format("This could mean that you have not installed the GPSDO correctly.\n\n");
        std::cout << boost::format("Visit one of these pages if the problem persists:\n");
        std::cout << boost::format(" * N2X0/E1X0: http://files.ettus.com/manual/page_gpsdo.html");
        std::cout << boost::format(" * X3X0: http://files.ettus.com/manual/page_gpsdo_x3x0.html\n\n");
        std::cout << boost::format(" * E3X0: http://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_hw_gps\n\n");
        exit(EXIT_FAILURE);
    }
Raymond Knopp's avatar
 
Raymond Knopp committed
269

Florian Kaltenberger's avatar
Florian Kaltenberger committed
270 271
    return EXIT_SUCCESS;
}
Raymond Knopp's avatar
 
Raymond Knopp committed
272

273 274 275 276 277 278 279 280 281 282 283 284 285
#if defined(USRP_REC_PLAY)
#include "usrp_lib.h"
static FILE    *pFile = NULL;
int             mmapfd = 0;
struct stat     sb;
iqrec_t        *ms_sample = NULL;                      // memory for all subframes
unsigned int    nb_samples = 0;
unsigned int    cur_samples = 0;
int64_t         wrap_count = 0;
int64_t         wrap_ts = 0;
unsigned int    u_sf_mode = 0;                         // 1=record, 2=replay
unsigned int    u_sf_record = 0;                       // record mode
unsigned int    u_sf_replay = 0;                       // replay mode
bruno mongazon's avatar
bruno mongazon committed
286
char            u_sf_filename[1024] = "";              // subframes file path
287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309
unsigned int    u_sf_max = DEF_NB_SF;                  // max number of recorded subframes
unsigned int    u_sf_loops = DEF_SF_NB_LOOP;           // number of loops in replay mode
unsigned int    u_sf_read_delay = DEF_SF_DELAY_READ;   // read delay in replay mode
unsigned int    u_sf_write_delay = DEF_SF_DELAY_WRITE; // write delay in replay mode

char config_opt_sf_file[] = CONFIG_OPT_SF_FILE;
char config_def_sf_file[] = DEF_SF_FILE;
char config_hlp_sf_file[] = CONFIG_HLP_SF_FILE;
char config_opt_sf_rec[] = CONFIG_OPT_SF_REC;
char config_hlp_sf_rec[] = CONFIG_HLP_SF_REC;
char config_opt_sf_rep[] = CONFIG_OPT_SF_REP;
char config_hlp_sf_rep[] = CONFIG_HLP_SF_REP;
char config_opt_sf_max[] = CONFIG_OPT_SF_MAX;
char config_hlp_sf_max[] = CONFIG_HLP_SF_MAX;
char config_opt_sf_loops[] = CONFIG_OPT_SF_LOOPS;
char config_hlp_sf_loops[] = CONFIG_HLP_SF_LOOPS;
char config_opt_sf_rdelay[] = CONFIG_OPT_SF_RDELAY;
char config_hlp_sf_rdelay[] = CONFIG_HLP_SF_RDELAY;
char config_opt_sf_wdelay[] = CONFIG_OPT_SF_WDELAY;
char config_hlp_sf_wdelay[] = CONFIG_HLP_SF_WDELAY;

#endif

310 311 312
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
laurent's avatar
laurent committed
313
static int trx_usrp_start(openair0_device *device) {
Raymond Knopp's avatar
 
Raymond Knopp committed
314

315 316 317 318
#if defined(USRP_REC_PLAY)
    if (u_sf_mode != 2) { // not replay mode
#endif      

laurent's avatar
laurent committed
319
    usrp_state_t *s = (usrp_state_t*)device->priv;
Raymond Knopp's avatar
 
Raymond Knopp committed
320

321 322 323 324 325 326 327 328 329 330 331

  // setup GPIO for TDD, GPIO(4) = ATR_RX
  //set data direction register (DDR) to output
    s->usrp->set_gpio_attr("FP0", "DDR", 0x1f, 0x1f);
  
  //set control register to ATR
    s->usrp->set_gpio_attr("FP0", "CTRL", 0x1f,0x1f);
  
  //set ATR register
    s->usrp->set_gpio_attr("FP0", "ATR_RX", 1<<4, 0x1f);

laurent's avatar
laurent committed
332 333
    // init recv and send streaming
    uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
334 335
    LOG_I(PHY,"Time in secs now: %llu \n", s->usrp->get_time_now().to_ticks(s->sample_rate));
    LOG_I(PHY,"Time in secs last pps: %llu \n", s->usrp->get_time_last_pps().to_ticks(s->sample_rate));
336 337 338 339 340 341 342 343 344 345

    if (s->use_gps == 1) {
      s->wait_for_first_pps = 1;
      cmd.time_spec = s->usrp->get_time_last_pps() + uhd::time_spec_t(1.0);    
    }
    else {
      s->wait_for_first_pps = 0; 
      cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
    }

laurent's avatar
laurent committed
346
    cmd.stream_now = false; // start at constant delay
laurent's avatar
laurent committed
347
    s->rx_stream->issue_stream_cmd(cmd);
Raymond Knopp's avatar
 
Raymond Knopp committed
348

laurent's avatar
laurent committed
349 350 351 352
    s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
    s->tx_md.has_time_spec = true;
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = false;
Raymond Knopp's avatar
 
Raymond Knopp committed
353

laurent's avatar
laurent committed
354 355 356
    s->rx_count = 0;
    s->tx_count = 0;
    s->rx_timestamp = 0;
357 358 359
#if defined(USRP_REC_PLAY)
    }
#endif      
laurent's avatar
laurent committed
360
    return 0;
Raymond Knopp's avatar
 
Raymond Knopp committed
361
}
laurent's avatar
laurent committed
362
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources
363 364
 * \param device the hardware to use
 */
laurent's avatar
laurent committed
365
static void trx_usrp_end(openair0_device *device) {
366 367 368 369 370 371
#if defined(USRP_REC_PLAY) // For some ugly reason, this can be called several times...
  static int done = 0;
  if (done == 1) return;
  done = 1;
  if (u_sf_mode != 2) { // not subframes replay
#endif  
laurent's avatar
laurent committed
372
    usrp_state_t *s = (usrp_state_t*)device->priv;
Raymond Knopp's avatar
 
Raymond Knopp committed
373

laurent's avatar
laurent committed
374 375 376 377 378
    s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);
    //send a mini EOB packet
    s->tx_md.end_of_burst = true;
    s->tx_stream->send("", 0, s->tx_md);
    s->tx_md.end_of_burst = false;
379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417
#if defined(USRP_REC_PLAY)
    }
#endif
#if defined(USRP_REC_PLAY)
    if (u_sf_mode == 1) { // subframes store
      pFile = fopen (u_sf_filename,"wb+");
      if (pFile == NULL) {
	std::cerr << "Cannot open " << u_sf_filename << std::endl;
      } else {
	unsigned int i = 0;
	unsigned int modu = 0;
	if ((modu = nb_samples % 10) != 0) {
	  nb_samples -= modu; // store entire number of frames
	}
	std::cerr << "Writing " << nb_samples << " subframes to " << u_sf_filename << " ..." << std::endl;
	for (i = 0; i < nb_samples; i++) {
	  fwrite(ms_sample+i, sizeof(unsigned char), sizeof(iqrec_t), pFile);
	}
	fclose (pFile);
	std::cerr << "File " << u_sf_filename << " closed." << std::endl;
      }
    }
    if (u_sf_mode == 1) { // record
      if (ms_sample != NULL) {
	free((void*)ms_sample);
	ms_sample = NULL;
      }
    }
    if (u_sf_mode == 2) { // replay
      if (ms_sample != MAP_FAILED) {
	munmap(ms_sample, sb.st_size);
	ms_sample = NULL;
      }
      if (mmapfd != 0) {
	close(mmapfd);
	mmapfd = 0;
      }
    }
#endif    
Raymond Knopp's avatar
 
Raymond Knopp committed
418
}
419

420 421
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
422
      @param timestamp The timestamp at which the first sample MUST be sent
423 424
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
425
      @param antenna_id index of the antenna if the device has multiple antennas
426
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
laurent's avatar
laurent committed
427 428
*/
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) {
429
  int ret=0;
430 431 432
#if defined(USRP_REC_PLAY)
  if (u_sf_mode != 2) { // not replay mode
#endif    
433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
  nsamps2 = (nsamps+7)>>3;
  __m256i buff_tx[2][nsamps2];
#else
  nsamps2 = (nsamps+3)>>2;
  __m128i buff_tx[2][nsamps2];
#endif
#elif defined(__arm__)
  nsamps2 = (nsamps+3)>>2;
  int16x8_t buff_tx[2][nsamps2];
#endif
  
  // bring RX data into 12 LSBs for softmodem RX
  for (int i=0; i<cc; i++) {
    for (int j=0; j<nsamps2; j++) {
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
      buff_tx[i][j] = _mm256_slli_epi16(((__m256i*)buff[i])[j],4);
#else
Cedric Roux's avatar
Cedric Roux committed
456
      buff_tx[i][j] = _mm_slli_epi16(((__m128i*)buff[i])[j],4);
457 458
#endif
#elif defined(__arm__)
Cedric Roux's avatar
Cedric Roux committed
459
      buff_tx[i][j] = vshlq_n_s16(((int16x8_t*)buff[i])[j],4);
460
#endif
laurent's avatar
laurent committed
461
    }
462
  }
laurent's avatar
laurent committed
463

464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
  s->tx_md.has_time_spec = flags;
  
  
  if(flags>0)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
  
  if (flags == 2) { // start of burst
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = false;
  } else if (flags == 3) { // end of burst
    s->tx_md.start_of_burst = false;
    s->tx_md.end_of_burst = true;
  } else if (flags == 4) { // start and end
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = true;
  } else if (flags==1) { // middle of burst
    s->tx_md.start_of_burst = false;
    s->tx_md.end_of_burst = false;
  }
  
  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0; i<cc; i++)
      buff_ptrs.push_back(buff_tx[i]);
    ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
  } else
    ret = (int)s->tx_stream->send(buff_tx[0], nsamps, s->tx_md,1e-3);
  
  
  
  if (ret != nsamps)
    LOG_E(PHY,"[xmit] tx samples %d != %d\n",ret,nsamps);
499 500 501 502 503 504 505 506 507
#if defined(USRP_REC_PLAY)
  } else {
    struct timespec req;
    req.tv_sec = 0;
    req.tv_nsec = u_sf_write_delay * 1000;
    nanosleep(&req, NULL);
    ret = nsamps;
  }
#endif    
508 509

  return ret;
Raymond Knopp's avatar
 
Raymond Knopp committed
510 511
}

512 513 514 515 516 517 518 519 520 521 522
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
laurent's avatar
laurent committed
523
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
524 525 526 527 528 529
  usrp_state_t *s = (usrp_state_t*)device->priv;
  int samples_received=0,i,j;
  int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(USRP_REC_PLAY)
  if (u_sf_mode != 2) { // not replay mode
#endif    
530 531
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
laurent's avatar
laurent committed
532 533
    nsamps2 = (nsamps+7)>>3;
    __m256i buff_tmp[2][nsamps2];
534
#else
laurent's avatar
laurent committed
535 536
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tmp[2][nsamps2];
537 538
#endif
#elif defined(__arm__)
laurent's avatar
laurent committed
539 540
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tmp[2][nsamps2];
541 542
#endif

laurent's avatar
laurent committed
543 544 545 546 547 548 549 550 551 552 553 554
    if (device->type == USRP_B200_DEV) {
        if (cc>1) {
            // receive multiple channels (e.g. RF A and RF B)
            std::vector<void *> buff_ptrs;
            for (int i=0; i<cc; i++) buff_ptrs.push_back(buff_tmp[i]);
            samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
        } else {
            // receive a single channel (e.g. from connector RF A)
            samples_received=0;
            while (samples_received != nsamps) {
                samples_received += s->rx_stream->recv(buff_tmp[0]+samples_received,
                                                       nsamps-samples_received, s->rx_md);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
555
                if  ((s->wait_for_first_pps == 0) && (s->rx_md.error_code!=uhd::rx_metadata_t::ERROR_CODE_NONE))
laurent's avatar
laurent committed
556
                    break;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
557
	        if ((s->wait_for_first_pps == 1) && (samples_received != nsamps)) { printf("sleep...\n");} //usleep(100); 
laurent's avatar
laurent committed
558
            }
Florian Kaltenberger's avatar
Florian Kaltenberger committed
559
	    if (samples_received == nsamps) s->wait_for_first_pps=0;
laurent's avatar
laurent committed
560 561 562 563
        }
        // bring RX data into 12 LSBs for softmodem RX
        for (int i=0; i<cc; i++) {
            for (int j=0; j<nsamps2; j++) {
564 565
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
laurent's avatar
laurent committed
566
                ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
567
#else
laurent's avatar
laurent committed
568
                ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
569 570
#endif
#elif defined(__arm__)
laurent's avatar
laurent committed
571
                ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
572
#endif
laurent's avatar
laurent committed
573 574 575 576 577 578 579 580 581 582 583 584 585
            }
        }
    } else if (device->type == USRP_X300_DEV) {
        if (cc>1) {
            // receive multiple channels (e.g. RF A and RF B)
            std::vector<void *> buff_ptrs;

            for (int i=0; i<cc; i++) buff_ptrs.push_back(buff[i]);
            samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
        } else {
            // receive a single channel (e.g. from connector RF A)
            samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
        }
586
    }
laurent's avatar
laurent committed
587 588
    if (samples_received < nsamps)
        LOG_E(PHY,"[recv] received %d samples out of %d\n",samples_received,nsamps);
589

laurent's avatar
laurent committed
590
    if ( s->rx_md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE)
Cedric Roux's avatar
Cedric Roux committed
591
        LOG_E(PHY, "%s\n", s->rx_md.to_pp_string(true).c_str());
592

laurent's avatar
laurent committed
593 594 595
    s->rx_count += nsamps;
    s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
    *ptimestamp = s->rx_timestamp;
596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634
#if defined (USRP_REC_PLAY)
  }
#endif    
#if defined(USRP_REC_PLAY)
  if (u_sf_mode == 1) { // record mode
    // Copy subframes to memory (later dump on a file)
    if (nb_samples < u_sf_max) {
      (ms_sample+nb_samples)->header = BELL_LABS_IQ_HEADER; 
      (ms_sample+nb_samples)->ts = *ptimestamp;
      memcpy((ms_sample+nb_samples)->samples, buff[0], nsamps*4);
      nb_samples++;
    }
  } else if (u_sf_mode == 2) { // replay mode
    if (cur_samples == nb_samples) {
      cur_samples = 0;
      wrap_count++;
      if (wrap_count == u_sf_loops) {
	std::cerr << "USRP device terminating subframes replay mode after " << u_sf_loops << " loops." << std::endl;
	return 0; // should make calling process exit
      }
      wrap_ts = wrap_count * (nb_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000));
    }
    if (cur_samples < nb_samples) {
      *ptimestamp = (ms_sample[0].ts + (cur_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000))) + wrap_ts;
      if (cur_samples == 0) {
	std::cerr << "starting subframes file with wrap_count=" << wrap_count << " wrap_ts=" << wrap_ts
		  << " ts=" << *ptimestamp << std::endl;
      }
      memcpy(buff[0], &ms_sample[cur_samples].samples[0], nsamps*4);
      cur_samples++;
    }
    struct timespec req;
    req.tv_sec = 0;
    req.tv_nsec = u_sf_read_delay * 1000;
    nanosleep(&req, NULL);
    return nsamps;
  }
#endif
  return samples_received;
Raymond Knopp's avatar
 
Raymond Knopp committed
635 636
}

637 638 639 640
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
laurent's avatar
laurent committed
641
static bool is_equal(double a, double b) {
laurent's avatar
laurent committed
642
    return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
Raymond Knopp's avatar
 
Raymond Knopp committed
643
}
Raymond Knopp's avatar
 
Raymond Knopp committed
644

645
void *freq_thread(void *arg) {
laurent's avatar
laurent committed
646 647 648 649 650 651

    openair0_device *device=(openair0_device *)arg;
    usrp_state_t *s = (usrp_state_t*)device->priv;

    s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
    s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
652 653
}
/*! \brief Set frequencies (TX/RX). Spawns a thread to handle the frequency change to not block the calling thread
654 655 656
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
laurent's avatar
laurent committed
657
 * \returns 0 in success
658
 */
659
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dont_block) {
Raymond Knopp's avatar
 
Raymond Knopp committed
660

laurent's avatar
laurent committed
661 662
    usrp_state_t *s = (usrp_state_t*)device->priv;
    pthread_t f_thread;
Raymond Knopp's avatar
 
Raymond Knopp committed
663

laurent's avatar
laurent committed
664
    printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);
665

laurent's avatar
laurent committed
666 667 668 669 670 671 672
    // spawn a thread to handle the frequency change to not block the calling thread
    if (dont_block == 1)
        pthread_create(&f_thread,NULL,freq_thread,(void*)device);
    else {
        s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
        s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
    }
laurent's avatar
laurent committed
673

laurent's avatar
laurent committed
674
    return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
675 676 677

}

laurent's avatar
laurent committed
678
/*! \brief Set RX frequencies
679 680
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
681
 * \returns 0 in success
682
 */
Raymond Knopp's avatar
 
Raymond Knopp committed
683 684
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

laurent's avatar
laurent committed
685 686 687
    usrp_state_t *s = (usrp_state_t*)device->priv;
    static int first_call=1;
    static double rf_freq,diff;
Raymond Knopp's avatar
 
Raymond Knopp committed
688

laurent's avatar
laurent committed
689
    uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);
Raymond Knopp's avatar
 
Raymond Knopp committed
690

laurent's avatar
laurent committed
691 692 693 694 695 696
    rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
    rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
    rf_freq=openair0_cfg[0].rx_freq[0];
    s->usrp->set_rx_freq(rx_tune_req);

    return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
697 698 699

}

700 701 702
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
703
 * \returns 0 in success
704
 */
laurent's avatar
laurent committed
705 706 707 708
int trx_usrp_set_gains(openair0_device* device,
                       openair0_config_t *openair0_cfg) {

    usrp_state_t *s = (usrp_state_t*)device->priv;
709 710
    ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(0);
    s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[0]);
laurent's avatar
laurent committed
711 712 713 714 715 716 717 718 719 720 721
    ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
    // limit to maximum gain
    if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
        LOG_E(PHY,"RX Gain 0 too high, reduce by %f dB\n",
              openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());
        exit(-1);
    }
    s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
    LOG_I(PHY,"Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n",
          openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],
          openair0_cfg[0].rx_gain[0],gain_range.stop());
722

laurent's avatar
laurent committed
723
    return(0);
Raymond Knopp's avatar
 
Raymond Knopp committed
724
}
725

726 727 728
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
729
int trx_usrp_stop(openair0_device* device) {
laurent's avatar
laurent committed
730
    return(0);
731
}
732

733
/*! \brief USRPB210 RX calibration table */
734
rx_gain_calib_table_t calib_table_b210[] = {
laurent's avatar
laurent committed
735 736 737 738 739 740 741
    {3500000000.0,44.0},
    {2660000000.0,49.0},
    {2300000000.0,50.0},
    {1880000000.0,53.0},
    {816000000.0,58.0},
    {-1,0}
};
742

743
/*! \brief USRPB210 RX calibration table */
744
rx_gain_calib_table_t calib_table_b210_38[] = {
laurent's avatar
laurent committed
745 746 747 748 749 750 751
    {3500000000.0,44.0},
    {2660000000.0,49.8},
    {2300000000.0,51.0},
    {1880000000.0,53.0},
    {816000000.0,57.0},
    {-1,0}
};
752

753
/*! \brief USRPx310 RX calibration table */
754
rx_gain_calib_table_t calib_table_x310[] = {
laurent's avatar
laurent committed
755 756 757 758 759 760 761 762 763
    {3500000000.0,77.0},
    {2660000000.0,81.0},
    {2300000000.0,81.0},
    {1880000000.0,82.0},
    {816000000.0,85.0},
    {-1,0}
};

/*! \brief Set RX gain offset
764 765
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
laurent's avatar
laurent committed
766
 * \returns 0 in success
767
 */
768
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
769

laurent's avatar
laurent committed
770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796
    int i=0;
    // loop through calibration table to find best adjustment factor for RX frequency
    double min_diff = 6e9,diff,gain_adj=0.0;
    if (bw_gain_adjust==1) {
        switch ((int)openair0_cfg[0].sample_rate) {
        case 30720000:
            break;
        case 23040000:
            gain_adj=1.25;
            break;
        case 15360000:
            gain_adj=3.0;
            break;
        case 7680000:
            gain_adj=6.0;
            break;
        case 3840000:
            gain_adj=9.0;
            break;
        case 1920000:
            gain_adj=12.0;
            break;
        default:
            LOG_E(PHY,"unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
            exit(-1);
            break;
        }
797
    }
laurent's avatar
laurent committed
798 799 800 801 802
    while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
        diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
        LOG_I(PHY,"cal %d: freq %f, offset %f, diff %f\n",
              i,
              openair0_cfg->rx_gain_calib_table[i].freq,
laurent's avatar
laurent committed
803 804 805 806 807 808
              openair0_cfg->rx_gain_calib_table[i].offset,diff);
        if (min_diff > diff) {
            min_diff = diff;
            openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
        }
        i++;
laurent's avatar
laurent committed
809
    }
810 811
}

laurent's avatar
laurent committed
812
/*! \brief print the USRP statistics
813 814 815
* \param device the hardware to use
* \returns  0 on success
*/
816
int trx_usrp_get_stats(openair0_device* device) {
laurent's avatar
laurent committed
817
    return(0);
818
}
819

laurent's avatar
laurent committed
820 821 822 823
/*! \brief Reset the USRP statistics
 * \param device the hardware to use
 * \returns  0 on success
 */
824
int trx_usrp_reset_stats(openair0_device* device) {
laurent's avatar
laurent committed
825
    return(0);
826
}
827

828 829 830 831 832 833 834 835 836 837 838
#if defined(USRP_REC_PLAY)
extern "C" {
/*! \brief Initializer for USRP record/playback config
 * \param parameter array description
 * \returns  0 on success
 */
int trx_usrp_recplay_config_init(paramdef_t *usrp_recplay_params) {
    // --subframes-file
    memcpy(usrp_recplay_params[0].optname, config_opt_sf_file, strlen(config_opt_sf_file));
    usrp_recplay_params[0].helpstr = config_hlp_sf_file;
    usrp_recplay_params[0].paramflags=PARAMFLAG_NOFREE;
bruno mongazon's avatar
bruno mongazon committed
839
    usrp_recplay_params[0].strptr=(char **)&u_sf_filename;
840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896
    usrp_recplay_params[0].defstrval = NULL;
    usrp_recplay_params[0].type=TYPE_STRING;
    usrp_recplay_params[0].numelt=sizeof(u_sf_filename);
    // --subframes-record
    memcpy(usrp_recplay_params[1].optname, config_opt_sf_rec, strlen(config_opt_sf_rec));
    usrp_recplay_params[1].helpstr = config_hlp_sf_rec;
    usrp_recplay_params[1].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[1].uptr=&u_sf_record;
    usrp_recplay_params[1].defuintval=0;
    usrp_recplay_params[1].type=TYPE_UINT;
    usrp_recplay_params[1].numelt=0;
    // --subframes-replay
    memcpy(usrp_recplay_params[2].optname, config_opt_sf_rep, strlen(config_opt_sf_rep));
    usrp_recplay_params[2].helpstr = config_hlp_sf_rep;
    usrp_recplay_params[2].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[2].uptr=&u_sf_replay;
    usrp_recplay_params[2].defuintval=0;
    usrp_recplay_params[2].type=TYPE_UINT;
    usrp_recplay_params[2].numelt=0;
    // --subframes-max
    memcpy(usrp_recplay_params[3].optname, config_opt_sf_max, strlen(config_opt_sf_max));
    usrp_recplay_params[3].helpstr = config_hlp_sf_max;
    usrp_recplay_params[3].paramflags=0;
    usrp_recplay_params[3].uptr=&u_sf_max;
    usrp_recplay_params[3].defuintval=DEF_NB_SF;
    usrp_recplay_params[3].type=TYPE_UINT;
    usrp_recplay_params[3].numelt=0;
    // --subframes-loops
    memcpy(usrp_recplay_params[4].optname, config_opt_sf_loops, strlen(config_opt_sf_loops));
    usrp_recplay_params[4].helpstr = config_hlp_sf_loops;
    usrp_recplay_params[4].paramflags=0;
    usrp_recplay_params[4].uptr=&u_sf_loops;
    usrp_recplay_params[4].defuintval=DEF_SF_NB_LOOP;
    usrp_recplay_params[4].type=TYPE_UINT;
    usrp_recplay_params[4].numelt=0;
    // --subframes-read-delay
    memcpy(usrp_recplay_params[5].optname, config_opt_sf_rdelay, strlen(config_opt_sf_rdelay));
    usrp_recplay_params[5].helpstr = config_hlp_sf_rdelay;
    usrp_recplay_params[5].paramflags=0;
    usrp_recplay_params[5].uptr=&u_sf_read_delay;
    usrp_recplay_params[5].defuintval=DEF_SF_DELAY_READ;
    usrp_recplay_params[5].type=TYPE_UINT;
    usrp_recplay_params[5].numelt=0;
    // --subframes-write-delay
    memcpy(usrp_recplay_params[6].optname, config_opt_sf_wdelay, strlen(config_opt_sf_wdelay));
    usrp_recplay_params[6].helpstr = config_hlp_sf_wdelay;
    usrp_recplay_params[6].paramflags=0;
    usrp_recplay_params[6].uptr=&u_sf_write_delay;
    usrp_recplay_params[6].defuintval=DEF_SF_DELAY_WRITE;
    usrp_recplay_params[6].type=TYPE_UINT;
    usrp_recplay_params[6].numelt=0;

    return 0; // always ok
}
}
#endif

897
extern "C" {
laurent's avatar
laurent committed
898 899 900 901 902
    /*! \brief Initialize Openair USRP target. It returns 0 if OK
    * \param device the hardware to use
         * \param openair0_cfg RF frontend parameters set by application
         */
    int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919
#if defined(USRP_REC_PLAY)
      paramdef_t usrp_recplay_params[7];
      // to check
      static int done = 0;
      if (done == 1) {
	return 0;
      } // prevent from multiple init
      done = 1;
      // end to check
      memset(usrp_recplay_params, 0, 7*sizeof(paramdef_t));
      memset(&u_sf_filename[0], 0, 1024);
      if (trx_usrp_recplay_config_init(usrp_recplay_params) != 0) {
	std::cerr << "USRP device record/replay mode configuration error exiting" << std::endl;
	return -1;
      }
      config_process_cmdline(usrp_recplay_params,sizeof(usrp_recplay_params)/sizeof(paramdef_t),NULL);

bruno mongazon's avatar
bruno mongazon committed
920
      if (strlen(u_sf_filename) == 0) {
921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953
	(void) strcpy(u_sf_filename, DEF_SF_FILE);
      }

      if (u_sf_replay == 1) u_sf_mode = 2;
      if (u_sf_record == 1) u_sf_mode = 1;
      
      if (u_sf_mode == 2) {
	// Replay subframes from from file
        int bw_gain_adjust=0;
        device->openair0_cfg = openair0_cfg;
	device->type = USRP_B200_DEV;
	openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
	bw_gain_adjust=1;
	openair0_cfg[0].tx_sample_advance     = 80;
	openair0_cfg[0].tx_bw                 = 20e6;
	openair0_cfg[0].rx_bw                 = 20e6;
        openair0_cfg[0].iq_txshift = 4;//shift
        openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
	set_rx_gain_offset(&openair0_cfg[0],0,bw_gain_adjust);
        device->priv = NULL;
        device->trx_start_func = trx_usrp_start;
        device->trx_write_func = trx_usrp_write;
        device->trx_read_func  = trx_usrp_read;
        device->trx_get_stats_func = trx_usrp_get_stats;
        device->trx_reset_stats_func = trx_usrp_reset_stats;
        device->trx_end_func   = trx_usrp_end;
        device->trx_stop_func  = trx_usrp_stop;
        device->trx_set_freq_func = trx_usrp_set_freq;
        device->trx_set_gains_func   = trx_usrp_set_gains;
        device->openair0_cfg = openair0_cfg;
	std::cerr << "USRP device initialized in subframes replay mode for " << u_sf_loops << " loops." << std::endl;
      } else {
#endif
Laurent's avatar
Laurent committed
954
        uhd::set_thread_priority_safe(1.0);
laurent's avatar
laurent committed
955
        usrp_state_t *s = (usrp_state_t*)calloc(sizeof(usrp_state_t),1);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
956
        
957 958 959
	if (openair0_cfg[0].clock_source==gpsdo)        
	    s->use_gps =1;

laurent's avatar
laurent committed
960 961 962 963 964 965 966 967 968
        // Initialize USRP device
        device->openair0_cfg = openair0_cfg;

        std::string args = "type=b200";
        uhd::device_addrs_t device_adds = uhd::device::find(args);

        int vers=0,subvers=0,subsubvers=0;
        int bw_gain_adjust=0;

969 970 971 972 973
#if defined(USRP_REC_PLAY)
	if (u_sf_mode == 1) {
	  std::cerr << "USRP device initialized in subframes record mode" << std::endl;
	}
#endif	
laurent's avatar
laurent committed
974 975 976 977 978 979 980
        sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
        LOG_I(PHY,"Checking for USRPs : UHD %s (%d.%d.%d)\n",
              uhd::get_version_string().c_str(),vers,subvers,subsubvers);

        if(device_adds.size() == 0)  {
            double usrp_master_clock = 184.32e6;
            std::string args = "type=x300";
981

laurent's avatar
laurent committed
982 983 984
            // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
            args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);

Laurent's avatar
Laurent committed
985 986
            //    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096";
            uhd::device_addrs_t device_adds = uhd::device::find(args);
987

Laurent's avatar
Laurent committed
988
            if(device_adds.size() == 0) {
Massive's avatar
Massive committed
989 990 991 992 993 994 995 996 997 998
		args += ",addr=192.168.30.2";

            	uhd::device_addrs_t device_adds = uhd::device::find(args);

 	        if(device_adds.size() == 0) {
 
                	std::cerr<<"No USRP Device Found. " << std::endl;
                	free(s);
                	return -1;
		}
Laurent's avatar
Laurent committed
999 1000 1001 1002
            }
            LOG_I(PHY,"Found USRP X300\n");
            s->usrp = uhd::usrp::multi_usrp::make(args);
            // lock mboard clocks
laurent's avatar
laurent committed
1003 1004 1005 1006
            if (openair0_cfg[0].clock_source == internal)
                s->usrp->set_clock_source("internal");
            else
                s->usrp->set_clock_source("external");
1007

Laurent's avatar
Laurent committed
1008 1009
            //Setting device type to USRP X300/X310
            device->type=USRP_X300_DEV;
1010

Laurent's avatar
Laurent committed
1011 1012 1013 1014 1015 1016
            // this is not working yet, master clock has to be set via constructor
            // set master clock rate and sample rate for tx & rx for streaming
            //s->usrp->set_master_clock_rate(usrp_master_clock);

            openair0_cfg[0].rx_gain_calib_table = calib_table_x310;

Cedric Roux's avatar
Cedric Roux committed
1017 1018 1019 1020
#if defined(USRP_REC_PLAY)
	    std::cerr << "-- Using calibration table: calib_table_x310" << std::endl; // Bell Labs info
#endif

1021 1022
            LOG_I(PHY,"%s() sample_rate:%u\n", __FUNCTION__, (int)openair0_cfg[0].sample_rate);

Laurent's avatar
Laurent committed
1023
            switch ((int)openair0_cfg[0].sample_rate) {
1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037
			case 122880000:
                // from usrp_time_offset
                //openair0_cfg[0].samples_per_packet    = 2048;
				openair0_cfg[0].tx_sample_advance     = 15; //to be checked
                openair0_cfg[0].tx_bw                 = 80e6;
                openair0_cfg[0].rx_bw                 = 80e6;
                break;
            case 61440000:
                // from usrp_time_offset
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 15;
                openair0_cfg[0].tx_bw                 = 40e6;
                openair0_cfg[0].rx_bw                 = 40e6;
                break;
Laurent's avatar
Laurent committed
1038
            case 30720000:
laurent's avatar
laurent committed
1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061
                // from usrp_time_offset
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 15;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 15360000:
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 45;
                openair0_cfg[0].tx_bw                 = 10e6;
                openair0_cfg[0].rx_bw                 = 10e6;
                break;
            case 7680000:
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 50;
                openair0_cfg[0].tx_bw                 = 5e6;
                openair0_cfg[0].rx_bw                 = 5e6;
                break;
            case 1920000:
                //openair0_cfg[0].samples_per_packet    = 2048;
                openair0_cfg[0].tx_sample_advance     = 50;
                openair0_cfg[0].tx_bw                 = 1.25e6;
                openair0_cfg[0].rx_bw                 = 1.25e6;
Laurent's avatar
Laurent committed
1062 1063 1064 1065 1066 1067
                break;
            default:
                LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
                exit(-1);
                break;
            }
1068

Laurent's avatar
Laurent committed
1069 1070 1071 1072
        } else {
            LOG_I(PHY,"Found USRP B200\n");
            args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=15360, recv_frame_size=15360" ;
            s->usrp = uhd::usrp::multi_usrp::make(args);
1073

laurent's avatar
laurent committed
1074 1075 1076 1077 1078 1079 1080 1081 1082
            //  s->usrp->set_rx_subdev_spec(rx_subdev);
            //  s->usrp->set_tx_subdev_spec(tx_subdev);

            // do not explicitly set the clock to "internal", because this will disable the gpsdo
            //    // lock mboard clocks
            //    s->usrp->set_clock_source("internal");
            // set master clock rate and sample rate for tx & rx for streaming

            // lock mboard clocks
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1083
            if (openair0_cfg[0].clock_source == internal){
1084
	        s->usrp->set_clock_source("internal");
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1085 1086
            }
            else{
laurent's avatar
laurent committed
1087
                s->usrp->set_clock_source("external");
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1088 1089
		s->usrp->set_time_source("external");
            }	
1090

Laurent's avatar
Laurent committed
1091 1092 1093 1094
            device->type = USRP_B200_DEV;
            if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
                openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
                bw_gain_adjust=0;
1095 1096 1097
#if defined(USRP_REC_PLAY)
		std::cerr << "-- Using calibration table: calib_table_b210" << std::endl; // Bell Labs info
#endif		
Laurent's avatar
Laurent committed
1098 1099 1100
            } else {
                openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
                bw_gain_adjust=1;
1101 1102 1103
#if defined(USRP_REC_PLAY)
		std::cerr << "-- Using calibration table: calib_table_b210_38" << std::endl; // Bell Labs info
#endif		
Laurent's avatar
Laurent committed
1104
            }
1105

laurent's avatar
laurent committed
1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142
            switch ((int)openair0_cfg[0].sample_rate) {
            case 30720000:
                s->usrp->set_master_clock_rate(30.72e6);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 115;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 23040000:
                s->usrp->set_master_clock_rate(23.04e6); //to be checked
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 113;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 15360000:
                s->usrp->set_master_clock_rate(30.72e06);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 103;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 7680000:
                s->usrp->set_master_clock_rate(30.72e6);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 80;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            case 1920000:
                s->usrp->set_master_clock_rate(30.72e6);
                //openair0_cfg[0].samples_per_packet    = 1024;
                openair0_cfg[0].tx_sample_advance     = 40;
                openair0_cfg[0].tx_bw                 = 20e6;
                openair0_cfg[0].rx_bw                 = 20e6;
                break;
            default:
laurent's avatar
laurent committed
1143 1144 1145 1146 1147
                LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
                exit(-1);
                break;
            }
        }
Laurent's avatar
Laurent committed
1148

laurent's avatar
laurent committed
1149 1150 1151
        /* device specific */
        //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
        //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
laurent's avatar
laurent committed
1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171
        openair0_cfg[0].iq_txshift = 4;//shift
        openair0_cfg[0].iq_rxrescale = 15;//rescale iqs

        for(int i=0; i<s->usrp->get_rx_num_channels(); i++) {
            if (i<openair0_cfg[0].rx_num_channels) {
                s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
                s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
                set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);

                ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
                // limit to maximum gain
                AssertFatal( openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] <= gain_range.stop(),
                             "RX Gain too high, lower by %f dB\n",
                             openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
                s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
                LOG_I(PHY,"RX Gain %d %f (%f) => %f (max %f)\n",i,
                      openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
                      openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
            }
        }
1172

laurent's avatar
laurent committed
1173
        for(int i=0; i<s->usrp->get_tx_num_channels(); i++) {
1174
	  ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(i);
laurent's avatar
laurent committed
1175 1176 1177
            if (i<openair0_cfg[0].tx_num_channels) {
                s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
                s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
1178
                s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[i],i);
1179 1180

                LOG_I(PHY,"USRP TX_GAIN:%3.2lf gain_range:%3.2lf tx_gain:%3.2lf\n", gain_range_tx.stop()-openair0_cfg[0].tx_gain[i], gain_range_tx.stop(), openair0_cfg[0].tx_gain[i]);
laurent's avatar
laurent committed
1181 1182 1183 1184 1185 1186 1187 1188
            }
        }

        //s->usrp->set_clock_source("external");
        //s->usrp->set_time_source("external");

        // display USRP settings
        LOG_I(PHY,"Actual master clock: %fMHz...\n",s->usrp->get_master_clock_rate()/1e6);
laurent's avatar
laurent committed
1189
        sleep(1);
laurent's avatar
laurent committed
1190 1191 1192 1193

        // create tx & rx streamer
        uhd::stream_args_t stream_args_rx("sc16", "sc16");
        int samples=openair0_cfg[0].sample_rate;
Laurent's avatar
Laurent committed
1194 1195 1196 1197 1198
	int max=s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps();
        samples/=10000;
	LOG_I(PHY,"RF board max packet size %u, size for 100µs jitter %d \n", max, samples);
	if ( samples < max )
	  stream_args_rx.args["spp"] = str(boost::format("%d") % samples );
Cedric Roux's avatar
Cedric Roux committed
1199
	LOG_I(PHY,"rx_max_num_samps %zu\n",
Laurent's avatar
Laurent committed
1200 1201
	      s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps());

laurent's avatar
laurent committed
1202 1203 1204
        for (int i = 0; i<openair0_cfg[0].rx_num_channels; i++)
            stream_args_rx.channels.push_back(i);
        s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
Laurent's avatar
Laurent committed
1205
	
laurent's avatar
laurent committed
1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241
        uhd::stream_args_t stream_args_tx("sc16", "sc16");
        for (int i = 0; i<openair0_cfg[0].tx_num_channels; i++)
            stream_args_tx.channels.push_back(i);
        s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);

        /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
        for(int i=0; i<s->usrp->get_tx_num_channels() && i<openair0_cfg[0].tx_num_channels; i++)
            s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);

        for(int i=0; i<s->usrp->get_rx_num_channels() && i<openair0_cfg[0].rx_num_channels; i++)
            s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);

        for (int i=0; i<openair0_cfg[0].rx_num_channels; i++) {
            LOG_I(PHY,"RX Channel %d\n",i);
            LOG_I(PHY,"  Actual RX sample rate: %fMSps...\n",s->usrp->get_rx_rate(i)/1e6);
            LOG_I(PHY,"  Actual RX frequency: %fGHz...\n", s->usrp->get_rx_freq(i)/1e9);
            LOG_I(PHY,"  Actual RX gain: %f...\n", s->usrp->get_rx_gain(i));
            LOG_I(PHY,"  Actual RX bandwidth: %fM...\n", s->usrp->get_rx_bandwidth(i)/1e6);
            LOG_I(PHY,"  Actual RX antenna: %s...\n", s->usrp->get_rx_antenna(i).c_str());
        }

        for (int i=0; i<openair0_cfg[0].tx_num_channels; i++) {
            LOG_I(PHY,"TX Channel %d\n",i);
            LOG_I(PHY,"  Actual TX sample rate: %fMSps...\n", s->usrp->get_tx_rate(i)/1e6);
            LOG_I(PHY,"  Actual TX frequency: %fGHz...\n", s->usrp->get_tx_freq(i)/1e9);
            LOG_I(PHY,"  Actual TX gain: %f...\n", s->usrp->get_tx_gain(i));
            LOG_I(PHY,"  Actual TX bandwidth: %fM...\n", s->usrp->get_tx_bandwidth(i)/1e6);
            LOG_I(PHY,"  Actual TX antenna: %s...\n", s->usrp->get_tx_antenna(i).c_str());
        }

        LOG_I(PHY,"Device timestamp: %f...\n", s->usrp->get_time_now().get_real_secs());

        device->priv = s;
        device->trx_start_func = trx_usrp_start;
        device->trx_write_func = trx_usrp_write;
        device->trx_read_func  = trx_usrp_read;
laurent's avatar
laurent committed
1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258
        device->trx_get_stats_func = trx_usrp_get_stats;
        device->trx_reset_stats_func = trx_usrp_reset_stats;
        device->trx_end_func   = trx_usrp_end;
        device->trx_stop_func  = trx_usrp_stop;
        device->trx_set_freq_func = trx_usrp_set_freq;
        device->trx_set_gains_func   = trx_usrp_set_gains;
        device->openair0_cfg = openair0_cfg;

        s->sample_rate = openair0_cfg[0].sample_rate;
        // TODO:
        // init tx_forward_nsamps based usrp_time_offset ex
        if(is_equal(s->sample_rate, (double)30.72e6))
            s->tx_forward_nsamps  = 176;
        if(is_equal(s->sample_rate, (double)15.36e6))
            s->tx_forward_nsamps = 90;
        if(is_equal(s->sample_rate, (double)7.68e6))
            s->tx_forward_nsamps = 50;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1259 1260 1261 1262 1263 1264 1265 1266

        if (s->use_gps == 1) {
	   if (sync_to_gps(device)) {
		 LOG_I(PHY,"USRP fails to sync with GPS...\n");
            exit(0);   
           } 
        }
 
1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305
#if defined(USRP_REC_PLAY)
      }
#endif
#if defined(USRP_REC_PLAY)
      if (u_sf_mode == 1) { // record mode	
	ms_sample = (iqrec_t*) malloc(u_sf_max * sizeof(iqrec_t));
	if (ms_sample == NULL) {
	  std::cerr<< "Memory allocation failed for subframe record or replay mode." << std::endl;
	  exit(-1);
	}
	memset(ms_sample, 0, u_sf_max * BELL_LABS_IQ_BYTES_PER_SF);
      }
      if (u_sf_mode == 2) {
	// use mmap
	mmapfd = open(u_sf_filename, O_RDONLY | O_LARGEFILE);
	if (mmapfd != 0) {
	  fstat(mmapfd, &sb);
	  std::cerr << "Loading subframes using mmap() from " << u_sf_filename << " size=" << (uint64_t)sb.st_size << " bytes ..." << std::endl;
	  ms_sample = (iqrec_t*) mmap(NULL, sb.st_size, PROT_WRITE, MAP_PRIVATE, mmapfd, 0);
	  if (ms_sample != MAP_FAILED) {
	    nb_samples = (sb.st_size / sizeof(iqrec_t));
	    int aligned = (((unsigned long)ms_sample & 31) == 0)? 1:0;
	    std::cerr<< "Loaded "<< nb_samples << " subframes." << std::endl;
	    if (aligned == 0) {
	      std::cerr<< "mmap address is not 32 bytes aligned, exiting." << std::endl;
	      close(mmapfd);
	      exit(-1);
	    }
	  } else {
	    std::cerr << "Cannot mmap file, exiting." << std::endl;
	    close(mmapfd);
	    exit(-1);
	  }
	} else {
	    std::cerr << "Cannot open " << u_sf_filename << " , exiting." << std::endl;
	    exit(-1);
	}
      }
#endif	
laurent's avatar
laurent committed
1306 1307
        return 0;
    }
Raymond Knopp's avatar
 
Raymond Knopp committed
1308
}
1309
/*@}*/