update config file for rrh

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf

@@ -143,28 +143,34 @@ eNBs =
 rrh_gw_config = (
  {			  
     local_if_name = "eth0";			  
-    remote_address = "169.254.8.28";					  
+    remote_address = "169.254.10.158";	
+    local_address = "169.254.8.15";				  
     #remote_address = "127.0.0.1";						  
-    #remote_address = "74:d4:35:cc:88:45";	 
-    local_address = "169.254.7.91";
+    #remote_address = "74:d4:35:cc:88:45";
     #local_address = "127.0.0.1";
     #local_address = "d4:be:d9:22:0a:ac";
     #for raw option local port must be the same to remote
     local_port = 50001;		       
     remote_port = 50000; 
     active = "yes";
-    preference = "udp";	                
+    tr_preference = "udp";
+    rf_preference = "usrp_b200";
+    iq_txshift = 8;
+    tx_sample_advance = 50;	
+    tx_scheduling_advance = 100; 	                
                              
 }
 );  
 
     NETWORK_INTERFACES :
     {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.242/24";
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth6";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.118/24";
 
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.242/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth6";
+
+
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.118/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
     };