Skip to content

O
OpenXG-RAN
Commit 90029d4f authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options

Merge branch 'bandwidth-testing' of... 

Merge branch 'bandwidth-testing' of https://gitlab.eurecom.fr/oai/openairinterface5g into bandwidth-testing
parents 80592c71 9525beb3
Hide whitespace changes
Inline Side-by-side
Showing with 38 additions and 13 deletions
executables/nr-ru.c
View file @ 90029d4f
...@@ -615,6 +615,7 @@ void rx_rf(RU_t *ru,int *frame,int *slot) { ...@@ -615,6 +615,7 @@ void rx_rf(RU_t *ru,int *frame,int *slot) {
openair0_timestamp ts,old_ts; openair0_timestamp ts,old_ts;
AssertFatal(*slot<fp->slots_per_frame && *slot>=0, "slot %d is illegal (%d)\n",*slot,fp->slots_per_frame); AssertFatal(*slot<fp->slots_per_frame && *slot>=0, "slot %d is illegal (%d)\n",*slot,fp->slots_per_frame);
start_meas(&ru->rx_fhaul);
for (i=0; i<ru->nb_rx; i++) for (i=0; i<ru->nb_rx; i++)
rxp[i] = (void *)&ru->common.rxdata[i][fp->get_samples_slot_timestamp(*slot,fp,0)]; rxp[i] = (void *)&ru->common.rxdata[i][fp->get_samples_slot_timestamp(*slot,fp,0)];
...@@ -694,6 +695,8 @@ void rx_rf(RU_t *ru,int *frame,int *slot) { ...@@ -694,6 +695,8 @@ void rx_rf(RU_t *ru,int *frame,int *slot) {
//exit_fun( "problem receiving samples" ); //exit_fun( "problem receiving samples" );
LOG_E(PHY, "problem receiving samples\n"); LOG_E(PHY, "problem receiving samples\n");
} }
stop_meas(&ru->rx_fhaul);
} }
...@@ -742,6 +745,9 @@ void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) { ...@@ -742,6 +745,9 @@ void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) {
flags = 3; // end of burst flags = 3; // end of burst
} }
// if this is the first TX, flags=2 => flags=2 (Start of burst), flags=1 => flags=2 (start of burst), flags=3 => flags = 4 (start and end of burst)
if (flags != 2 && proc->first_tx==1) flags += 1;
if (fp->freq_range==nr_FR2) { if (fp->freq_range==nr_FR2) {
// the beam index is written in bits 8-10 of the flags // the beam index is written in bits 8-10 of the flags
// bit 11 enables the gpio programming // bit 11 enables the gpio programming
...@@ -763,6 +769,7 @@ void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) { ...@@ -763,6 +769,7 @@ void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) {
flags |= beam<<8; flags |= beam<<8;
LOG_D(HW,"slot %d, beam %d\n",slot,ru->common.beam_id[0][slot*fp->symbols_per_slot]); LOG_D(HW,"slot %d, beam %d\n",slot,ru->common.beam_id[0][slot*fp->symbols_per_slot]);
} }
if (proc->first_tx == 1) proc->first_tx = 0;
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_WRITE_FLAGS, flags ); VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_WRITE_FLAGS, flags );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_RU, frame ); VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_RU, frame );
...@@ -780,8 +787,8 @@ void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) { ...@@ -780,8 +787,8 @@ void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) {
siglen+sf_extension, siglen+sf_extension,
ru->nb_tx, ru->nb_tx,
flags); flags);
LOG_D(PHY,"[TXPATH] RU %d aa %d tx_rf, writing to TS %llu, frame %d, unwrapped_frame %d, slot %d, returned %d, E %f\n",ru->idx,i, LOG_D(PHY,"[TXPATH] RU %d aa %d tx_rf, writing to TS %llu, frame %d, unwrapped_frame %d, slot %d, flags %d, siglen+sf_extension %d, returned %d, E %f\n",ru->idx,i,
(long long unsigned int)timestamp,frame,proc->frame_tx_unwrap,slot, txs,10*log10((double)signal_energy(txp[0],siglen+sf_extension))); (long long unsigned int)timestamp,frame,proc->frame_tx_unwrap,slot, flags, siglen+sf_extension, txs,10*log10((double)signal_energy(txp[0],siglen+sf_extension)));
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 ); VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
//AssertFatal(txs == 0,"trx write function error %d\n", txs); //AssertFatal(txs == 0,"trx write function error %d\n", txs);
} }
...@@ -1164,8 +1171,7 @@ void *ru_stats_thread(void *param) { ...@@ -1164,8 +1171,7 @@ void *ru_stats_thread(void *param) {
print_meas(&ru->ofdm_total_stats,"feptx_total",NULL,NULL); print_meas(&ru->ofdm_total_stats,"feptx_total",NULL,NULL);
} }
if (ru->fh_north_asynch_in) print_meas(&ru->rx_fhaul,"rx_fhaul",NULL,NULL); print_meas(&ru->rx_fhaul,"rx_fhaul",NULL,NULL);
print_meas(&ru->tx_fhaul,"tx_fhaul",NULL,NULL); print_meas(&ru->tx_fhaul,"tx_fhaul",NULL,NULL);
if (ru->fh_north_out) { if (ru->fh_north_out) {
...@@ -1241,7 +1247,14 @@ void *ru_thread( void *param ) { ...@@ -1241,7 +1247,14 @@ void *ru_thread( void *param ) {
int slot = fp->slots_per_frame-1; int slot = fp->slots_per_frame-1;
int frame = 1023; int frame = 1023;
char threadname[40]; char threadname[40];
int initial_wait=1;
int opp_enabled0 = opp_enabled;
nfapi_nr_config_request_scf_t *cfg = &ru->config; nfapi_nr_config_request_scf_t *cfg = &ru->config;
// set the timing measurements for startup phase, for RX fronthaul settling measurements, put it to configured value after
opp_enabled = 1;
// set default return value // set default return value
ru_thread_status = 0; ru_thread_status = 0;
// set default return value // set default return value
...@@ -1343,6 +1356,18 @@ void *ru_thread( void *param ) { ...@@ -1343,6 +1356,18 @@ void *ru_thread( void *param ) {
if (ru->fh_south_in) ru->fh_south_in(ru,&frame,&slot); if (ru->fh_south_in) ru->fh_south_in(ru,&frame,&slot);
else AssertFatal(1==0, "No fronthaul interface at south port"); else AssertFatal(1==0, "No fronthaul interface at south port");
if (initial_wait == 1 && proc->frame_rx < 1000 && ru->fh_south_in == rx_rf) {
if (proc->frame_rx>0 && ((proc->frame_rx % 100) == 0) && proc->tti_rx==0) {
LOG_I(PHY,"delay processing to let RX stream settle, frame %d (trials %d)\n",proc->frame_rx,ru->rx_fhaul.trials);
print_meas(&ru->rx_fhaul,"rx_fhaul",NULL,NULL);
reset_meas(&ru->rx_fhaul);
}
continue;
}
if (proc->frame_rx>=800) {
initial_wait=0;
opp_enabled = opp_enabled0;
}
proc->timestamp_tx = proc->timestamp_rx + (sf_ahead*fp->samples_per_subframe); proc->timestamp_tx = proc->timestamp_rx + (sf_ahead*fp->samples_per_subframe);
proc->frame_tx = (proc->tti_rx > (fp->slots_per_frame-1-(fp->slots_per_subframe*sf_ahead))) ? (proc->frame_rx+1)&1023 : proc->frame_rx; proc->frame_tx = (proc->tti_rx > (fp->slots_per_frame-1-(fp->slots_per_subframe*sf_ahead))) ? (proc->frame_rx+1)&1023 : proc->frame_rx;
proc->tti_tx = (proc->tti_rx + (fp->slots_per_subframe*sf_ahead))%fp->slots_per_frame; proc->tti_tx = (proc->tti_rx + (fp->slots_per_subframe*sf_ahead))%fp->slots_per_frame;
...@@ -1701,6 +1726,7 @@ void set_function_spec_param(RU_t *ru) { ...@@ -1701,6 +1726,7 @@ void set_function_spec_param(RU_t *ru) {
switch (ru->if_south) { switch (ru->if_south) {
case LOCAL_RF: // this is an RU with integrated RF (RRU, gNB) case LOCAL_RF: // this is an RU with integrated RF (RRU, gNB)
reset_meas(&ru->rx_fhaul);
if (ru->function == NGFI_RRU_IF5) { // IF5 RRU if (ru->function == NGFI_RRU_IF5) { // IF5 RRU
ru->do_prach = 0; // no prach processing in RU ru->do_prach = 0; // no prach processing in RU
ru->fh_north_in = NULL; // no shynchronous incoming fronthaul from north ru->fh_north_in = NULL; // no shynchronous incoming fronthaul from north
...@@ -1738,7 +1764,6 @@ void set_function_spec_param(RU_t *ru) { ...@@ -1738,7 +1764,6 @@ void set_function_spec_param(RU_t *ru) {
ru->ifdevice.host_type = RRU_HOST; ru->ifdevice.host_type = RRU_HOST;
ru->rfdevice.host_type = RRU_HOST; ru->rfdevice.host_type = RRU_HOST;
ru->ifdevice.eth_params = &ru->eth_params; ru->ifdevice.eth_params = &ru->eth_params;
reset_meas(&ru->rx_fhaul);
reset_meas(&ru->tx_fhaul); reset_meas(&ru->tx_fhaul);
reset_meas(&ru->compression); reset_meas(&ru->compression);
reset_meas(&ru->transport); reset_meas(&ru->transport);
......
openair1/PHY/NR_TRANSPORT/nr_dci.c
View file @ 90029d4f
...@@ -213,7 +213,7 @@ void nr_generate_dci(PHY_VARS_gNB *gNB, ...@@ -213,7 +213,7 @@ void nr_generate_dci(PHY_VARS_gNB *gNB,
(amp * mod_dmrs[l][(dmrs_idx << 1) + 1]) >> 15; (amp * mod_dmrs[l][(dmrs_idx << 1) + 1]) >> 15;
#ifdef DEBUG_PDCCH_DMRS #ifdef DEBUG_PDCCH_DMRS
if (dci_pdu->RNTI!=0xFFFF) LOG_I(PHY,"PDCCH DMRS %d: l %d position %d => (%d,%d)\n",dmrs_idx,l,k,((int16_t *)txdataF)[(l*frame_parms->ofdm_symbol_size + k)<<1], if (dci_pdu->RNTI!=0xFFFF) LOG_D(PHY,"PDCCH DMRS %d: l %d position %d => (%d,%d)\n",dmrs_idx,l,k,((int16_t *)txdataF)[(l*frame_parms->ofdm_symbol_size + k)<<1],
((int16_t *)txdataF)[((l*frame_parms->ofdm_symbol_size + k)<<1)+1]); ((int16_t *)txdataF)[((l*frame_parms->ofdm_symbol_size + k)<<1)+1]);
#endif #endif
...@@ -225,7 +225,7 @@ void nr_generate_dci(PHY_VARS_gNB *gNB, ...@@ -225,7 +225,7 @@ void nr_generate_dci(PHY_VARS_gNB *gNB,
((int16_t *) txdataF)[((l * frame_parms->ofdm_symbol_size + k) << 1) + 1] = ((int16_t *) txdataF)[((l * frame_parms->ofdm_symbol_size + k) << 1) + 1] =
(amp * mod_dci[(dci_idx << 1) + 1]) >> 15; (amp * mod_dci[(dci_idx << 1) + 1]) >> 15;
#ifdef DEBUG_DCI #ifdef DEBUG_DCI
printf("PDCCH: l %d position %d => (%d,%d)\n",l,k,((int16_t *)txdataF)[(l*frame_parms->ofdm_symbol_size + k)<<1], if (dci_pdu->RNTI!=0xFFFF) LOG_D(PHY,"PDCCH: l %d position %d => (%d,%d)\n",l,k,((int16_t *)txdataF)[(l*frame_parms->ofdm_symbol_size + k)<<1],
((int16_t *)txdataF)[((l*frame_parms->ofdm_symbol_size + k)<<1)+1]); ((int16_t *)txdataF)[((l*frame_parms->ofdm_symbol_size + k)<<1)+1]);
#endif #endif
......
openair1/PHY/TOOLS/time_meas.c
View file @ 90029d4f
...@@ -64,8 +64,8 @@ int cpumeas(int action) ...@@ -64,8 +64,8 @@ int cpumeas(int action)
} }
void print_meas_now(time_stats_t *ts, void print_meas_now(time_stats_t *ts,
const char *name, const char *name,
FILE *file_name) FILE *file_name)
{ {
if (opp_enabled) { if (opp_enabled) {
//static double cpu_freq_GHz = 3.2; //static double cpu_freq_GHz = 3.2;
...@@ -80,9 +80,9 @@ void print_meas_now(time_stats_t *ts, ...@@ -80,9 +80,9 @@ void print_meas_now(time_stats_t *ts,
} }
void print_meas(time_stats_t *ts, void print_meas(time_stats_t *ts,
const char *name, const char *name,
time_stats_t *total_exec_time, time_stats_t *total_exec_time,
time_stats_t *sf_exec_time) time_stats_t *sf_exec_time)
{ {
if (opp_enabled) { if (opp_enabled) {
static int first_time = 0; static int first_time = 0;
......
openair1/SCHED_NR/phy_procedures_nr_gNB.c
View file @ 90029d4f
...@@ -164,7 +164,7 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB, ...@@ -164,7 +164,7 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB,
gNB->Mod_id,frame,slot,pdcch_pdu_id,ul_pdcch_pdu_id); gNB->Mod_id,frame,slot,pdcch_pdu_id,ul_pdcch_pdu_id);
if (pdcch_pdu_id >= 0 || ul_pdcch_pdu_id >= 0) { if (pdcch_pdu_id >= 0 || ul_pdcch_pdu_id >= 0) {
LOG_D(PHY, "[gNB %d] Frame %d slot %d Calling nr_generate_dci_top (number of UL/DL DCI %d/%d)\n", if (slot>0) LOG_D(PHY, "[gNB %d] Frame %d slot %d Calling nr_generate_dci_top (number of UL/DL DCI %d/%d)\n",
gNB->Mod_id, frame, slot, gNB->Mod_id, frame, slot,
gNB->ul_pdcch_pdu[ul_pdcch_pdu_id].pdcch_pdu.pdcch_pdu.pdcch_pdu_rel15.numDlDci, gNB->ul_pdcch_pdu[ul_pdcch_pdu_id].pdcch_pdu.pdcch_pdu.pdcch_pdu_rel15.numDlDci,
gNB->pdcch_pdu[pdcch_pdu_id].pdcch_pdu.pdcch_pdu_rel15.numDlDci); gNB->pdcch_pdu[pdcch_pdu_id].pdcch_pdu.pdcch_pdu_rel15.numDlDci);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment