Skip to content

O
OpenXG-RAN
Commit b557ccfd authored by Cedric Roux's avatar Cedric Roux
Browse files
Options

Merge remote-tracking branch 'oai/develop' into bugfix-95-asn1c_warnings_removal

parents 1657e089 a05cdce1
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 25937 additions and 2669 deletions
cmake_targets/CMakeLists.txt
View file @ b557ccfd
......@@ -42,6 +42,10 @@ set (OPENAIR_BIN_DIR ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY})
project (OpenAirInterface)
add_subdirectory(${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms7002m lms7002m)
add_subdirectory(${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR lmsSDR)
add_subdirectory(${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/Si5351C Si5351C)
###########################################
# macros to define options as there is numerous options in oai
################################################
......@@ -159,7 +163,7 @@ set(CMAKE_C_FLAGS
"${CMAKE_C_FLAGS} -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1 -DHAVE_ARPA_INET_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRERROR=1 -DHAVE_SOCKET=1 -DHAVE_MEMSET=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_LIBSCTP"
)
set(CMAKE_CXX_FLAGS
"${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR}"
"${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR} -std=c++11 "
)
......@@ -172,6 +176,7 @@ add_definitions(-DCMAKER)
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
Message("RF_BOARD is ${RF_BOARD}")
# Below has been put in comment because does not work with
# SVN authentication.
#
......@@ -456,7 +461,7 @@ add_list1_option(NB_ANTENNAS_RX "2" "Number of antennas in reception" "1" "2" "4
add_list1_option(NB_ANTENNAS_TX "2" "Number of antennas in transmission" "1" "2" "4")
add_list1_option(NB_ANTENNAS_TXRX "2" "Number of antennas in ????" "1" "2" "4")
add_list2_option(RF_BOARD "EXMIMO" "RF head type" "None" "EXMIMO" "OAI_USRP" "OAI_BLADERF" "CPRIGW")
add_list2_option(RF_BOARD "EXMIMO" "RF head type" "None" "EXMIMO" "OAI_USRP" "OAI_BLADERF" "CPRIGW" "OAI_LMSSDR")
add_list2_option(TRANSP_PRO "None" "Transport protocol type" "None" "ETHERNET")
......@@ -487,6 +492,13 @@ set(HWLIB_BLADERF_SOURCE
)
add_library(oai_bladerfdevif MODULE ${HWLIB_BLADERF_SOURCE} )
include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/")
set (option_HWLMSSDRLIB_lib "-l LMS_SDR -l LMS7002M -l Si5351C")
set(HWLIB_LMSSDR_SOURCE
${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp
)
add_library(oai_lmssdrdevif MODULE ${HWLIB_LMSSDR_SOURCE} )
include_directories("${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/")
set(TPLIB_ETHERNET_SOURCE
${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
......@@ -495,6 +507,7 @@ set(TPLIB_ETHERNET_SOURCE
)
add_library(oai_eth_transpro MODULE ${TPLIB_ETHERNET_SOURCE} )
# RF devices / transport protocols settings
######################################################################
if (${RF_BOARD} STREQUAL "EXMIMO")
......@@ -522,9 +535,25 @@ elseif (${RF_BOARD} STREQUAL "OAI_BLADERF")
${OPENAIR_TARGETS}/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
)
LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu")
set(option_HW_lib "bladeRF -rdynamic -ldl")
elseif (${RF_BOARD} STREQUAL "CPRIGW") #to ask
#set(LOWLATENCY False)
elseif (${RF_BOARD} STREQUAL "OAI_LMSSDR")
include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB")
include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR")
include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms7002m")
include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/Si5351C")
include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard")
LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu")
LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/lmsSDR")
LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/lms7002m")
LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/Si5351C")
set(HW_SOURCE ${HW_SOURCE} ${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp)
set(LOWLATENCY False)
set(option_HW_lib "-lLMS_SDR -lLMS7002M -lSi5351C -rdynamic -ldl")
elseif (${RF_BOARD} STREQUAL "CPRIGW")
set(HW_SOURCE ${HW_SOURCE}
${OPENAIR_TARGETS}/ARCH/CPRIGW/USERSPACE/LIB/cprigw_lib.c
)
......@@ -1535,13 +1564,14 @@ add_executable(lte-softmodem
target_link_libraries (lte-softmodem
-Wl,--start-group
RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB}
RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB}
-Wl,--end-group )
target_link_libraries (lte-softmodem ${LIBXML2_LIBRARIES})
target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${option_HW_lib} ${option_TP_lib} ${XFORMS_LIBRARIES} )
target_link_libraries (lte-softmodem ${LIBBOOST_LIBRARIES})
target_link_libraries (lte-softmodem ${LIB_LMS_LIBRARIES})
# lte-softmodem-nos1 is both eNB and UE implementation
###################################################
......@@ -1575,8 +1605,7 @@ target_link_libraries (lte-softmodem-nos1
target_link_libraries (lte-softmodem-nos1 ${LIBXML2_LIBRARIES})
target_link_libraries (lte-softmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${option_HW_lib} ${option_TP_lib} ${XFORMS_LIBRARIES} )
target_link_libraries (lte-softmodem-nos1 ${LIBBOOST_LIBRARIES})
target_link_libraries (lte-softmodem-nos1 ${LIB_LMS_LIBRARIES})
# rrh
################################
......@@ -1590,7 +1619,6 @@ add_executable(rrh_gw
${HW_SOURCE}
${TRANSPORT_SOURCE}
)
# assert
target_include_directories(rrh_gw PRIVATE ${OPENAIR_DIR}/common/utils/itti)
target_link_libraries(rrh_gw
-Wl,--start-group
......@@ -1598,12 +1626,21 @@ target_link_libraries(rrh_gw
-Wl,--end-group )
target_link_libraries (rrh_gw rt pthread m )
target_link_libraries (rrh_gw ${option_HW_lib} ${option_TP_lib} ${LIBBOOST_LIBRARIES} )
target_link_libraries (rrh_gw ${LIB_LMS_LIBRARIES})
Message("-- option_HW_lib=${option_HW_lib}")
Message("-- HW_SOURCE=${HW_SOURCE}")
Message("-- option_TP_lib=${option_TP_lib}")
Message("-- TRANSPORT_SOURCE=${TRANSPORT_SOURCE}")
if (${RF_BOARD} STREQUAL "OAI_LMSSDR")
add_dependencies(lte-softmodem LMS7002M LMS_SDR Si5351C)
add_dependencies(lte-softmodem-nos1 LMS7002M LMS_SDR Si5351C)
add_dependencies(rrh_gw LMS7002M LMS_SDR Si5351C)
endif (${RF_BOARD} STREQUAL "OAI_LMSSDR")
# USIM process
#################
#add_executable(usim
......
cmake_targets/autotests/README.txt
View file @ b557ccfd
......@@ -171,6 +171,25 @@ Obj.# Case# Test# Description
01 65 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 65 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 70 00 lte-softmodem tests with SoDeRa RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 70 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 70 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 70 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 70 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 70 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 70 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 75 00 lte-softmodem + RRH tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 75 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 75 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 75 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 75 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 64 lte-softmodem-noS1 tests
02 Functional test case
......
cmake_targets/autotests/test_case_list.xml
View file @ b557ccfd
This source diff could not be displayed because it is too large. You can view the blob instead.
cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
View file @ b557ccfd
......@@ -131,6 +131,7 @@ def start_ue () :
ip = IPRoute()
idx = ip.link_lookup(ifname=iface)[0]
os.system ('route add ' + gw + ' ppp0')
os.system('sleep 5')
os.system ('ping ' + gw)
break
except Exception, e:
......
cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py 0 → 100755
View file @ b557ccfd
#!/usr/bin/python
import time
import serial
import os
from pyroute2 import IPRoute
import sys
import re
import threading
import signal
import traceback
import os
import commands
# configure the serial connections (the parameters differs on the device you are connecting to)
#First we find an open port to work with
serial_port=''
ser=serial.Serial()
openair_dir = os.environ.get('OPENAIR_DIR')
if openair_dir == None:
print "Error getting OPENAIR_DIR environment variable"
sys.exit(1)
sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
from lib_autotest import *
def find_open_port():
global serial_port, ser
max_ports=100
if os.path.exists(serial_port) == True:
return serial_port
for port in range(0,100):
serial_port = '/dev/ttyUSB'+str(port)
if os.path.exists(serial_port) == True:
print 'New Serial Port : ' + serial_port
break
ser = serial.Serial(port=serial_port)
return
#serial_port = '/dev/ttyUSB2'
bandrich_ppd_config = os.environ.get('OPENAIR_DIR') + '/cmake_targets/autotests/tools/wdial.bandrich.conf'
exit_flag=0
def signal_handler(signal, frame):
print('You pressed Ctrl+C!')
print('Resetting the UE to detached state')
timeout=10
exit_flag=1
send_command('AT+CGATT=0' , 'OK' , timeout)
sys.exit(0)
signal.signal(signal.SIGINT, signal_handler)
#ser.open()
#ser.isOpen()
class pppThread (threading.Thread):
def __init__(self, threadID, name, counter):
threading.Thread.__init__(self)
self.threadID = threadID
self.name = name
self.counter = counter
def run(self):
print "Starting " + self.name
#Here we keep running pppd thread in indefinite loop as this script terminates sometimes
#while 1:
while 1:
time.sleep(5) #Hard coded, do not reduce this number!
print "Starting wvdial now..."
print 'exit_flag = ' + str(exit_flag)
send_command('AT+CGATT=1','OK', 300)
os.system('wvdial -C ' + bandrich_ppd_config + '' )
if exit_flag == 1:
print "Exit flag set to true. Exiting pppThread now"
print "Terminating wvdial now..."
def send_command (cmd, response, timeout):
count=0
sleep_duration = 1
print 'In function: send_command: cmd = <' + cmd + '> response: <' + response + '> \n'
global serial_port, ser
while count <= timeout:
try:
#Sometimes the port does not exist coz of reset in modem.
#In that case, we need to search for this port again
if os.path.exists(serial_port) == False:
find_open_port()
ser.write (cmd + '\r\n')
out = ''
time.sleep(sleep_duration)
count = count + sleep_duration
while ser.inWaiting() > 0:
out += ser.read(1)
print 'out = <' + out + '> response = <' + response + '> \n'
if re.search(response, out):
break
except Exception, e:
error = ' cmd : ' + cmd + ' response : ' + response
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
def start_ue () :
#print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
timeout=60 #timeout in seconds
send_command('AT', 'OK' , timeout)
#send_command('AT+CFUN=1' , 'OK' , timeout)
#send_command('AT+CGATT=0' , 'OK' , timeout)
send_command('AT+CGATT=1','OK', 300)
#os.system('wvdial -C ' + bandrich_ppd_config + ' &' )
thread_ppp = pppThread(1, "ppp_thread", 1)
thread_ppp.start()
iface='ppp0'
while 1:
time.sleep ( 2)
#Now we check if ppp0 interface is up and running
try:
if exit_flag == 1:
break
ip = IPRoute()
idx = ip.link_lookup(ifname=iface)[0]
os.system ('route add ' + gw + ' ppp0')
os.system('sleep 5')
os.system ('ping ' + gw)
break
except Exception, e:
error = ' Interface ' + iface + 'does not exist...'
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
thread_ppp.join()
def stop_ue():
timeout=60
os.system('killall wvdial')
send_command('AT', 'OK' , timeout)
send_command('AT+CGATT=0' , 'OK|ERROR' , timeout)
#send_command('AT+CFUN=4' , 'OK' , timeout)
#reset the USB BUS of Bandrich UE
def reset_ue():
stringIdBandrich='Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard'
status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
if (out == '') :
print "Bandrich 4G LTE Adapter not found. Exiting now..."
sys.exit()
p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
res=p.findall(out)
BusId=res[0][0]
DeviceId=res[0][1]
VendorId=res[0][2]
ProductId=res[0][3]
usb_dir= find_usb_path(VendorId, ProductId)
print "Bandrich 4G LTE Adapter found in..." + usb_dir
cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 15" )
cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 30" )
i=1
gw='192.172.0.1'
while i < len(sys.argv):
arg=sys.argv[i]
if arg == '--start-ue' :
find_open_port()
print 'Using Serial port : ' + serial_port
start_ue()
elif arg == '--stop-ue' :
find_open_port()
print 'Using Serial port : ' + serial_port
stop_ue()
elif arg == '--reset-ue' :
reset_ue()
elif arg == '-gw' :
gw = sys.argv[i+1]
i=i+1
elif arg == '-h' :
print "--reset-ue: Reset the UE on USB Bus. Similar to unplugging and plugging the UE"
print "--stop-ue: Stop the UE. Send DETACH command"
print "--start-ue: Start the UE. Send ATTACH command"
print "-gw: Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial"
else :
print " Script called with wrong arguments, arg = " + arg
sys.exit()
i = i +1
cmake_targets/autotests/tools/search_repl.py
View file @ b557ccfd
......@@ -26,6 +26,9 @@ if keyword == 'mme_ip_address':
elif keyword == 'IPV4_LIST':
replacement_text = keyword + ' = ( ' + replacement_text + ' ) ; '
string = re.sub(r"IPV4_LIST\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
elif keyword == 'rrh_gw_config':
replacement_text = keyword + ' = ( { ' + replacement_text + ' } ) ; '
string = re.sub(r"rrh_gw_config\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
else :
replacement_text = keyword + ' = ' + replacement_text + ' ; '
string = re.sub(r"%s\s*=\s*([^\$]+?)\s*;" % keyword , replacement_text, string, re.M)
......
cmake_targets/build_oai
View file @ b557ccfd
......@@ -91,7 +91,7 @@ Options
default is Rel10,
Rel8 limits the implementation to 3GPP Release 8 version
-w | --hardware
EXMIMO (Default), USRP, BLADERF, None
EXMIMO (Default), USRP, BLADERF, LMSSDR, None
Adds this RF board support (in external packages installation and in compilation)
-t | --transport protocol
ETHERNET , None
......@@ -181,7 +181,7 @@ function main() {
-w | --hardware)
HW="$2" #"${i#*=}"
# Use OAI_USRP as the key word USRP is used inside UHD driver
if [ "$HW" != "BLADERF" -a "$HW" != "USRP" -a "$HW" != "None" -a "$HW" != "EXMIMO" ] ; then
if [ "$HW" != "BLADERF" -a "$HW" != "USRP" -a "$HW" != "LMSSDR" -a "$HW" != "None" -a "$HW" != "EXMIMO" ] ; then
echo_fatal "Unknown HW type $HW will exit..."
else
if [ "$HW" == "USRP" ] ; then
......@@ -190,6 +190,9 @@ function main() {
if [ "$HW" == "BLADERF" ] ; then
HW="OAI_BLADERF"
fi
if [ "$HW" == "LMSSDR" ] ; then
HW="OAI_LMSSDR"
fi
echo_info "Setting hardware to: $HW"
fi
shift 2;;
......@@ -299,6 +302,7 @@ function main() {
fi
fi
echo_info "RF HW set to $HW"
#Now we set flags to enable deadline scheduler settings
#By default: USRP: disable,
#By default: BLADERF: enable,
......@@ -312,6 +316,8 @@ function main() {
LOWLATENCY_FLAG_USER="False"
elif [ "$HW" = "OAI_BLADERF" ] ; then
LOWLATENCY_FLAG_USER="False"
elif [ "$HW" = "OAI_LMSSDR" ] ; then
LOWLATENCY_FLAG_USER="False"
elif [ "$HW" = "None" ] ; then
LOWLATENCY_FLAG_USER="False"
else
......@@ -689,6 +695,16 @@ function main() {
ln -s liboai_bladerfdevif.so liboai_device.so
ln -s $dbin/liboai_bladerfdevif.so.$REL $dbin/liboai_device.so
echo_info "liboai_device.so is linked to BLADERF device library"
elif [ "$HW" == "OAI_LMSSDR" ] ; then
# if [ -f "/usr/include/libbladeRF.h" ] ; then
compilations \
$build_dir oai_lmssdrdevif \
liboai_lmssdrdevif.so $dbin/liboai_lmssdrdevif.so.$REL
# fi
ln -s liboai_lmssdrdevif.so liboai_device.so
ln -s $dbin/liboai_lmssdrdevif.so.$REL $dbin/liboai_device.so
echo_info "liboai_device.so is linked to LMSSDR device library"
else
echo_info "liboai_device.so is not linked to any device library"
fi
......
cmake_targets/rrh_gw/CMakeLists.txt deleted 100644 → 0
View file @ 1657e089
cmake_minimum_required(VERSION 2.8)
set(ENABLE_VCD_FIFO False )
set(ENABLE_ITTI False )
set(RF_BOARD "ETHERNET")
set(PACKAGE_NAME "\"rrh_gw\"")
include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)
cmake_targets/tools/build_helper
View file @ b557ccfd
......@@ -380,3 +380,21 @@ done
}
# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {
local ip=$1
local stat=1
if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
OIFS=$IFS
IFS='.'
ip=($ip)
IFS=$OIFS
[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
&& ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
stat=$?
fi
return $stat
}
\ No newline at end of file
cmake_targets/tools/stop_exmimo2
View file @ b557ccfd
......@@ -13,5 +13,5 @@ sudo -E $OPENAIR_DIR/cmake_targets/tools/init_exmimo2
#now we stop the card from transmitting anything
cd $OPENAIR_DIR/targets/bin
sudo -E octave $OPENAIR_DIR/cmake_targets/tools/exmimo_stop_octave.m
sudo -E octave -H --no-gui $OPENAIR_DIR/cmake_targets/tools/exmimo_stop_octave.m
openair1/PHY/LTE_REFSIG/primary_synch.h
View file @ b557ccfd
/*******************************************************************************
OpenAirInterface
Copyright(c) 1999 - 2014 Eurecom
OpenAirInterface is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenAirInterface is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with OpenAirInterface.The full GNU General Public License is
included in this distribution in the file called "COPYING". If not,
see <http://www.gnu.org/licenses/>.
Contact Information
OpenAirInterface Admin: openair_admin@eurecom.fr
OpenAirInterface Tech : openair_tech@eurecom.fr
OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
*******************************************************************************/
short primary_synch0[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-26120,-19785,11971,-30502,-24020,-22288,32117,6492,31311,9658,-16384,-28378,25100,-21063,-7292,-31946,20429,25618,14948,29158,11971,-30502,31311,9658,25100,-21063,-16384,28377,-24020,22287,32117,6492,-7292,31945,20429,25618,-26120,-19785,-16384,-28378,-16384,28377,-26120,-19785,-32402,4883,31311,-9659,32117,6492,-7292,-31946,32767,-1,25100,-21063,-24020,22287,-32402,4883,-32402,4883,-24020,22287,25100,-21063,32767,-1,-7292,-31946,32117,6492,31311,-9659,-32402,4883,-26120,-19785,-16384,28377,-16384,-28378,-26120,-19785,20429,25618,-7292,31945,32117,6492,-24020,22287,-16384,28377,25100,-21063,31311,9658,11971,-30502,14948,29158,20429,25618,-7292,-31946,25100,-21063,-16384,-28378,31311,9658,32117,6492,-24020,-22288,11971,-30502,-26120,-19785,32767,0,0,0,0,0,0,0,0,0,0,0};
short primary_synch1[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-31754,-8086,-24020,-22288,2448,32675,-26120,19784,27073,18458,-16384,28377,25100,21062,-29523,14217,-7292,31945,-13477,-29868,-24020,-22288,27073,18458,25100,21062,-16384,-28378,2448,-32676,-26120,19784,-29523,-14218,-7292,31945,-31754,-8086,-16384,28377,-16384,-28378,-31754,-8086,31311,-9659,27073,-18459,-26120,19784,-29523,14217,32767,-1,25100,21062,2448,-32676,31311,-9659,31311,-9659,2448,-32676,25100,21062,32767,0,-29523,14217,-26120,19784,27073,-18459,31311,-9659,-31754,-8086,-16384,-28378,-16384,28377,-31754,-8086,-7292,31945,-29523,-14218,-26120,19784,2448,-32676,-16384,-28378,25100,21062,27073,18458,-24020,-22288,-13477,-29868,-7292,31945,-29523,14217,25100,21062,-16384,28377,27073,18458,-26120,19784,2448,32675,-24020,-22288,-31754,-8086,32767,0,0,0,0,0,0,0,0,0,0,0};
short primary_synch2[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-31754,8085,-24020,22287,2448,-32676,-26120,-19785,27073,-18459,-16384,-28378,25100,-21063,-29523,-14218,-7292,-31946,-13477,29867,-24020,22287,27073,-18459,25100,-21063,-16384,28377,2448,32675,-26120,-19785,-29523,14217,-7292,-31946,-31754,8085,-16384,-28378,-16384,28377,-31754,8085,31311,9658,27073,18458,-26120,-19785,-29523,-14218,32767,0,25100,-21063,2448,32675,31311,9658,31311,9658,2448,32675,25100,-21063,32767,0,-29523,-14218,-26120,-19785,27073,18458,31311,9658,-31754,8085,-16384,28377,-16384,-28378,-31754,8085,-7292,-31946,-29523,14217,-26120,-19785,2448,32675,-16384,28377,25100,-21063,27073,-18459,-24020,22287,-13477,29867,-7292,-31946,-29523,-14218,25100,-21063,-16384,-28378,27073,-18459,-26120,-19785,2448,-32676,-24020,22287,-31754,8085,32767,-1,0,0,0,0,0,0,0,0,0,0};
......
openair1/PHY/LTE_TRANSPORT/initial_sync.c
View file @ b557ccfd
......@@ -48,7 +48,7 @@
#include "gain_control.h"
#endif
#if defined(OAI_USRP) || defined(EXMIMO)
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_LMSSDR)
#include "common_lib.h"
extern openair0_config_t openair0_cfg[];
#endif
......@@ -291,17 +291,10 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
frame_parms->Ncp=NORMAL;
frame_parms->frame_type=FDD;
init_frame_parms(frame_parms,1);
// write_output("rxdata0.m","rxd0",phy_vars_ue->lte_ue_common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
/*#ifdef OAI_USRP
for (aarx = 0; aarx<frame_parms->nb_antennas_rx;aarx++) {
rxdata128 = (__m128i*)phy_vars_ue->lte_ue_common_vars.rxdata[aarx];
for (i=0; i<(frame_parms->samples_per_tti*10)>>2; i++) {
rxdata128[i] = _mm_srai_epi16(rxdata128[i],4);
}
}
#endif*/
/*
write_output("rxdata0.m","rxd0",phy_vars_ue->lte_ue_common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
exit(-1);
*/
sync_pos = lte_sync_time(phy_vars_ue->lte_ue_common_vars.rxdata,
frame_parms,
(int *)&phy_vars_ue->lte_ue_common_vars.eNb_id);
......@@ -336,9 +329,11 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain(phy_vars_ue,0);
#endif
#endif
#endif
#endif
#endif
......@@ -569,7 +564,7 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
phy_vars_ue->lte_frame_parms.phich_config_common.phich_duration,
phich_string[phy_vars_ue->lte_frame_parms.phich_config_common.phich_resource],
phy_vars_ue->lte_frame_parms.nb_antennas_tx_eNB);
#if defined(OAI_USRP) || defined(EXMIMO)
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_LMSSDR)
LOG_I(PHY,"[UE %d] Frame %d Measured Carrier Frequency %.0f Hz (offset %d Hz)\n",
phy_vars_ue->Mod_id,
phy_vars_ue->frame_rx,
......
openair1/PHY/LTE_TRANSPORT/print_stats.c
View file @ b557ccfd
......@@ -50,7 +50,7 @@
#endif
extern int mac_get_rrc_status(uint8_t Mod_id,uint8_t eNB_flag,uint8_t index);
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF)
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
#include "common_lib.h"
extern openair0_config_t openair0_cfg[];
#endif
......@@ -97,10 +97,10 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t
#ifdef EXMIMO
len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB (LNA %d, vga %d dB)\n",phy_vars_ue->rx_total_gain_dB, openair0_cfg[0].rxg_mode[0],(int)openair0_cfg[0].rx_gain[0]);
#endif
#if defined(OAI_USRP) || defined(OAI_BLADERF)
#if defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB\n",phy_vars_ue->rx_total_gain_dB);
#endif
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
len += sprintf(&buffer[len], "[UE_PROC] Frequency offset %d Hz (%d), estimated carrier frequency %f Hz\n",phy_vars_ue->lte_ue_common_vars.freq_offset,openair_daq_vars.freq_offset,openair0_cfg[0].rx_freq[0]-phy_vars_ue->lte_ue_common_vars.freq_offset);
#endif
len += sprintf(&buffer[len], "[UE PROC] UE mode = %s (%d)\n",mode_string[phy_vars_ue->UE_mode[0]],phy_vars_ue->UE_mode[0]);
......
openair1/PHY/TOOLS/cmult_mm.c deleted 100644 → 0
View file @ 1657e089
/*******************************************************************************
OpenAirInterface
Copyright(c) 1999 - 2014 Eurecom
OpenAirInterface is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenAirInterface is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with OpenAirInterface.The full GNU General Public License is
included in this distribution in the file called "COPYING". If not,
see <http://www.gnu.org/licenses/>.
Contact Information
OpenAirInterface Admin: openair_admin@eurecom.fr
OpenAirInterface Tech : openair_tech@eurecom.fr
OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
*******************************************************************************/
#include "defs.h"
int mult_cpx_matrix_h(short *x1[2][2],
short *x2[2][2],
short *y[2][2],
unsigned int N,
unsigned short output_shift,
short hermitian)
{
if (hermitian) {
// this computes x1^H*x2 and stores it in y
mult_cpx_vector_h(x2[0][0],x1[0][0],y[0][0],N,output_shift,1);
mult_cpx_vector_h(x2[0][1],x1[0][1],y[0][0],N,output_shift,1);
mult_cpx_vector_h(x2[0][0],x1[1][0],y[1][0],N,output_shift,1);
mult_cpx_vector_h(x2[0][1],x1[1][1],y[1][0],N,output_shift,1);
mult_cpx_vector_h(x2[1][0],x1[0][0],y[0][1],N,output_shift,1);
mult_cpx_vector_h(x2[1][1],x1[0][1],y[0][1],N,output_shift,1);
mult_cpx_vector_h(x2[1][0],x1[1][0],y[1][1],N,output_shift,1);
mult_cpx_vector_h(x2[1][1],x1[1][1],y[1][1],N,output_shift,1);
} else {
// this computes x1*x2^H and stores it in y
mult_cpx_vector_h(x1[0][0],x2[0][0],y[0][0],N,output_shift,1);
mult_cpx_vector_h(x1[0][1],x2[0][1],y[0][0],N,output_shift,1);
mult_cpx_vector_h(x1[0][0],x2[1][0],y[0][1],N,output_shift,1);
mult_cpx_vector_h(x1[0][1],x2[1][1],y[0][1],N,output_shift,1);
mult_cpx_vector_h(x1[1][0],x2[0][0],y[1][0],N,output_shift,1);
mult_cpx_vector_h(x1[1][1],x2[0][1],y[1][0],N,output_shift,1);
mult_cpx_vector_h(x1[1][0],x2[1][0],y[1][1],N,output_shift,1);
mult_cpx_vector_h(x1[1][1],x2[1][1],y[1][1],N,output_shift,1);
}
}
int mult_cpx_matrix_vector(int *x1[2][2],
int *x2[2],
int *y[2],
unsigned int N,
unsigned short output_shift)
{
Zero_Buffer(y[0],N*8);
Zero_Buffer(y[1],N*8);
// this computes x1*x2 and stores it in y (32 bit)
mult_cpx_vector_add32((short*)x2[0],(short*)x1[0][0],(short*)y[0],N);
mult_cpx_vector_add32((short*)x2[1],(short*)x1[0][1],(short*)y[0],N);
mult_cpx_vector_add32((short*)x2[0],(short*)x1[1][0],(short*)y[1],N);
mult_cpx_vector_add32((short*)x2[1],(short*)x1[1][1],(short*)y[1],N);
// shift and pack
shift_and_pack((short*)y[0],N,output_shift);
shift_and_pack((short*)y[1],N,output_shift);
}
#ifdef MAIN_MM
#include <stdio.h>
#include <stdlib.h>
main ()
{
short x1_00[256] __attribute__((aligned(16)));
short x1_10[256] __attribute__((aligned(16)));
short x1_01[256] __attribute__((aligned(16)));
short x1_11[256] __attribute__((aligned(16)));
short x2_0[256] __attribute__((aligned(16)));
short x2_1[256] __attribute__((aligned(16)));
short y_0[256] __attribute__((aligned(16)));
short y_1[256] __attribute__((aligned(16)));
int *x1[2][2];
int *x2[2];
int *y[2];
int i,m,n;
x1[0][0] = (int*)x1_00;
x1[0][1] = (int*)x1_01;
x1[1][0] = (int*)x1_10;
x1[1][1] = (int*)x1_11;
x2[0] = (int*)x2_0;
x2[1] = (int*)x2_1;
y[0] = (int*)y_0;
y[1] = (int*)y_1;
for(m=0; m<2; m++) {
for(n=0; n<2; n++) {
for(i=0; i<256; i+=4) {
((short*)x1[m][n])[i] = ((short) rand())/4;
((short*)x1[m][n])[i+1] = ((short) rand())/4;
((short*)x1[m][n])[i+2] = -((short*)x1[m][n])[i+1];
((short*)x1[m][n])[i+3] = ((short*)x1[m][n])[i];
}
}
for(i=0; i<256; i+=4) {
((short*)x2[m])[i] = ((short) rand())/4;
((short*)x2[m])[i+1] = ((short) rand())/4;
((short*)x2[m])[i+2] = ((short*)x2[m])[i];
((short*)x2[m])[i+3] = ((short*)x2[m])[i+1];
}
Zero_Buffer(y[m],512);
}
/*
input[0] = 100;
input[1] = 200;
input[2] = -200;
input[3] = 100;
input[4] = 1000;
input[5] = 2000;
input[6] = -2000;
input[7] = 1000;
input[8] = 100;
input[9] = 200;
input[10] = -200;
input[11] = 100;
input[12] = 1000;
input[13] = 2000;
input[14] = -2000;
input[15] = 1000;
input2[0] = 2;
input2[1] = 1;
input2[2] = 2;
input2[3] = 1;
input2[4] = 20;
input2[5] = 10;
input2[6] = 20;
input2[7] = 10;
input2[8] = 2;
input2[9] = 1;
input2[10] = 2;
input2[11] = 1;
input2[12] = 2000;
input2[13] = 1000;
input2[14] = 2000;
input2[15] = 1000;
x1[0][0] = (int*)input;
x1[0][1] = (int*)input;
x1[1][0] = (int*)input;
x1[1][1] = (int*)input;
x2[0] = (int*)input2;
x2[1] = (int*)input2;
y[0] = (int*)output;
y[1] = (int*)output2;
*/
mult_cpx_matrix_vector(x1,x2,y,64,15);
//mult_cpx_vector_add32(x2[0],x1[0][0],y[0],64);
for (i=0; i<128; i+=2)
printf("i=%d, x1 = [%d+1i*%d %d+1i*%d; %d+1i*%d %d+1i*%d]; x2 = [%d+1i*%d; %d+1i*%d]; y = [%d+1i*%d; %d+1i*%d]; y_m= round(x1*x2./pow2(15)); y-y_m \n",
i,
((short*)x1[0][0])[2*i], ((short*)x1[0][0])[2*i+2],
((short*)x1[0][1])[2*i], ((short*)x1[0][1])[2*i+2],
((short*)x1[1][0])[2*i], ((short*)x1[1][0])[2*i+2],
((short*)x1[1][1])[2*i], ((short*)x1[1][1])[2*i+2],
((short*)x2[0])[2*i], ((short*)x2[0])[2*i+1],
((short*)x2[1])[2*i], ((short*)x2[1])[2*i+1],
((short*)y[0])[2*i], ((short*)y[0])[2*i+1],
((short*)y[1])[2*i], ((short*)y[1])[2*i+1]);
//((int*)y[0])[i], ((int*)y[0])[i+1],
//((int*)y[1])[i], ((int*)y[1])[i+1]);
}
#endif
openair1/PHY/TOOLS/cmult_vv.c
View file @ b557ccfd
......@@ -50,7 +50,7 @@ int mult_cpx_conj_vector(int16_t *x1,
uint32_t N,
int output_shift)
{
// Multiply elementwise two complex vectors of N elements with repeated formatted output
// Multiply elementwise the complex conjugate of x1 with x2.
// x1 - input 1 in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
// We assume x1 with a dinamic of 15 bit maximum
//
......@@ -90,7 +90,7 @@ int mult_cpx_conj_vector(int16_t *x1,
tmp_im = _mm_shufflelo_epi16(*x1_128,_MM_SHUFFLE(2,3,0,1));
tmp_im = _mm_shufflehi_epi16(tmp_im,_MM_SHUFFLE(2,3,0,1));
tmp_im = _mm_sign_epi16(tmp_im,*(__m128i*)&conjug[0]);
tmp_im = _mm_madd_epi16(tmp_im,*x1_128);
tmp_im = _mm_madd_epi16(tmp_im,*x2_128);
tmp_re = _mm_srai_epi32(tmp_re,output_shift);
tmp_im = _mm_srai_epi32(tmp_im,output_shift);
tmpy0 = _mm_unpacklo_epi32(tmp_re,tmp_im);
......@@ -130,3 +130,4 @@ int mult_cpx_conj_vector(int16_t *x1,
return(0);
}
openair1/PHY/TOOLS/cmult_vvh.c deleted 100644 → 0
View file @ 1657e089
This diff is collapsed.
openair1/PHY/TOOLS/defs.h
View file @ b557ccfd
This diff is collapsed.
openair1/PHY/TOOLS/lte_phy_scope.c
View file @ b557ccfd
......@@ -88,7 +88,7 @@ FD_lte_phy_scope_enb *create_lte_phy_scope_enb( void )
fl_set_object_boxtype( fdui->rxsig_t, FL_EMBOSSED_BOX );
fl_set_object_color( fdui->rxsig_t, FL_BLACK, FL_RED );
fl_set_object_lcolor( fdui->rxsig_t, FL_WHITE ); // Label color
fl_set_xyplot_ybounds(fdui->rxsig_t,30,70);
fl_set_xyplot_ybounds(fdui->rxsig_t,10,70);
// Time-domain channel response
fdui->chest_t = fl_add_xyplot( FL_NORMAL_XYPLOT, 410, 20, 370, 100, "Channel Impulse Response (samples, abs)" );
......@@ -396,7 +396,7 @@ FD_lte_phy_scope_ue *create_lte_phy_scope_ue( void )
fl_set_object_boxtype( fdui->rxsig_t, FL_EMBOSSED_BOX );
fl_set_object_color( fdui->rxsig_t, FL_BLACK, FL_RED );
fl_set_object_lcolor( fdui->rxsig_t, FL_WHITE ); // Label color
fl_set_xyplot_ybounds(fdui->rxsig_t,30,70);
fl_set_xyplot_ybounds(fdui->rxsig_t,10,70);
// Time-domain channel response
fdui->chest_t = fl_add_xyplot( FL_NORMAL_XYPLOT, 410, 20, 370, 100, "Channel Impulse Response (samples, abs)" );
......
openair1/PHY/TOOLS/time_meas.h
View file @ b557ccfd
......@@ -26,6 +26,9 @@
Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
*******************************************************************************/
#ifndef __TIME_MEAS_DEFS__H__
#define __TIME_MEAS_DEFS__H__
#include <unistd.h>
#include <math.h>
#include <stdint.h>
......@@ -148,3 +151,4 @@ static inline void copy_meas(time_stats_t *dst_ts,time_stats_t *src_ts)
dst_ts->max=src_ts->max;
}
}
#endif
openair1/SCHED/phy_procedures_lte_ue.c
View file @ b557ccfd
......@@ -121,7 +121,7 @@ extern int rx_sig_fifo;
#endif
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
#endif
......@@ -197,7 +197,7 @@ void dump_dlsch_SI(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t subframe)
exit(-1);
}
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
//unsigned int gain_table[31] = {100,112,126,141,158,178,200,224,251,282,316,359,398,447,501,562,631,708,794,891,1000,1122,1258,1412,1585,1778,1995,2239,2512,2818,3162};
/*
unsigned int get_tx_amp_prach(int power_dBm, int power_max_dBm, int N_RB_UL)
......@@ -669,7 +669,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
uint8_t ack_status=0;
int8_t Po_PUCCH;
int32_t ulsch_start=0;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
int overflow=0;
int k,l;
#endif
......@@ -969,7 +969,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#endif
phy_vars_ue->tx_total_RE = nb_rb*12;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
tx_amp = get_tx_amp(phy_vars_ue->tx_power_dBm,
phy_vars_ue->tx_power_max_dBm,
phy_vars_ue->lte_frame_parms.N_RB_UL,
......@@ -1065,7 +1065,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#endif
phy_vars_ue->tx_total_RE = 12;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
tx_amp = get_tx_amp(Po_PUCCH,
phy_vars_ue->tx_power_max_dBm,
phy_vars_ue->lte_frame_parms.N_RB_UL,
......@@ -1128,7 +1128,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#endif
phy_vars_ue->tx_total_RE = 12;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
tx_amp = get_tx_amp(Po_PUCCH,
phy_vars_ue->tx_power_max_dBm,
phy_vars_ue->lte_frame_parms.N_RB_UL,
......@@ -1230,7 +1230,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
if (abstraction_flag == 0) {
nsymb = (frame_parms->Ncp == 0) ? 14 : 12;
#if defined(EXMIMO) || defined(OAI_USRP) //this is the EXPRESS MIMO case
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)//this is the EXPRESS MIMO case
ulsch_start = (phy_vars_ue->rx_offset+subframe_tx*frame_parms->samples_per_tti-
openair_daq_vars.timing_advance-
phy_vars_ue->timing_advance-
......@@ -1257,7 +1257,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
if (frame_parms->Ncp == 1)
PHY_ofdm_mod(&phy_vars_ue->lte_ue_common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size],
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
dummy_tx_buffer,
#else
&phy_vars_ue->lte_ue_common_vars.txdata[aa][ulsch_start],
......@@ -1268,7 +1268,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
CYCLIC_PREFIX);
else
normal_prefix_mod(&phy_vars_ue->lte_ue_common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size],
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
dummy_tx_buffer,
#else
&phy_vars_ue->lte_ue_common_vars.txdata[aa][ulsch_start],
......@@ -1289,7 +1289,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
}
*/
#ifndef OFDMA_ULSCH
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
apply_7_5_kHz(phy_vars_ue,dummy_tx_buffer,0);
apply_7_5_kHz(phy_vars_ue,dummy_tx_buffer,1);
#else
......@@ -1304,7 +1304,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
*/
#endif
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
overflow = ulsch_start - 9*frame_parms->samples_per_tti;
//if ((slot_tx==4) && (aa==0)) printf("ulsch_start %d, overflow %d\n",ulsch_start,overflow);
......@@ -1404,7 +1404,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
phy_vars_ue->tx_total_RE = 96;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
phy_vars_ue->lte_ue_prach_vars[eNB_id]->amp = get_tx_amp(phy_vars_ue->tx_power_dBm,
phy_vars_ue->tx_power_max_dBm,
phy_vars_ue->lte_frame_parms.N_RB_UL,
......@@ -1553,9 +1553,11 @@ void lte_ue_measurement_procedures(uint16_t l, PHY_VARS_UE *phy_vars_ue,uint8_t
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain (phy_vars_ue,0);
#endif
#endif
#endif
#endif
#endif
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GAIN_CONTROL, VCD_FUNCTION_OUT);
......@@ -2676,18 +2678,18 @@ int phy_procedures_UE_RX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstrac
if (ret == (1+phy_vars_ue->dlsch_ue[eNB_id][0]->max_turbo_iterations)) {
phy_vars_ue->dlsch_errors[eNB_id]++;
//#ifdef DEBUG_PHY_PROC
#ifdef DEBUG_PHY_PROC
LOG_D(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d DLSCH in error (rv %d,mcs %d,TBS %d)\n",
phy_vars_ue->Mod_id,phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
harq_pid,frame_rx,subframe_prev,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->rvidx,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->TBS);
// if (abstraction_flag ==0 )
dump_dlsch(phy_vars_ue,eNB_id,subframe_prev,harq_pid);
mac_xface->macphy_exit("");
//#endif
/*
if (abstraction_flag ==0 )
dump_dlsch(phy_vars_ue,eNB_id,subframe_prev,harq_pid);
mac_xface->macphy_exit(""); */
#endif
} else {
LOG_D(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d (slot_rx %d): Received DLSCH (rv %d,mcs %d,TBS %d)\n",
phy_vars_ue->Mod_id,phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
......
openair1/SIMULATION/LTE_PHY/dlsim.c
View file @ b557ccfd
......@@ -656,7 +656,17 @@ int main(int argc, char **argv)
printf("dual_stream_UE=%d\n", dual_stream_UE);
}
lte_param_init(n_tx,n_rx,transmission_mode,extended_prefix_flag,frame_type,Nid_cell,tdd_config,N_RB_DL,threequarter_fs,osf,perfect_ce);
lte_param_init(n_tx,
n_rx,
transmission_mode,
extended_prefix_flag,
frame_type,
Nid_cell,
tdd_config,
N_RB_DL,
threequarter_fs,
osf,
perfect_ce);
......
openair1/SIMULATION/LTE_PHY/ulsim.c
View file @ b557ccfd
......@@ -194,6 +194,7 @@ int main(int argc, char **argv)
int nb_rb_set = 0;
int sf;
int threequarter_fs=0;
opp_enabled=1; // to enable the time meas
cpu_freq_GHz = (double)get_cpu_freq_GHz();
......@@ -203,7 +204,7 @@ int main(int argc, char **argv)
logInit();
while ((c = getopt (argc, argv, "hapZbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:L")) != -1) {
while ((c = getopt (argc, argv, "hapZEbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:L")) != -1) {
switch (c) {
case 'a':
channel_model = AWGN;
......@@ -373,6 +374,10 @@ int main(int argc, char **argv)
cyclic_shift = atoi(optarg);
break;
case 'E':
threequarter_fs=1;
break;
case 'N':
N0 = atoi(optarg);
break;
......@@ -470,6 +475,7 @@ int main(int argc, char **argv)
0,
tdd_config,
N_RB_DL,
threequarter_fs,
osf,
0);
......
openair2/ENB_APP/enb_config.c
View file @ b557ccfd
This diff is collapsed.
openair2/ENB_APP/enb_config.h
View file @ b557ccfd
......@@ -86,7 +86,14 @@ typedef struct rrh_gw_config_s {
char *remote_address;
uint16_t local_port;
uint16_t remote_port;
int tx_scheduling_advance;
int tx_sample_advance;
int iq_txshift;
unsigned exmimo:1;
unsigned usrp_b200:1;
unsigned usrp_x300:1;
unsigned bladerf:1;
unsigned lmssdr:1;
} rrh_gw_config_t;
typedef struct Enb_properties_s {
......
targets/ARCH/COMMON/common_lib.c
View file @ b557ccfd
......@@ -60,6 +60,9 @@ case USRP_X300_DEV:
case BLADERF_DEV:
printf("[%s] has loaded BLADERF device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
break;
case LMSSDR_DEV:
printf("[%s] has loaded LMSSDR device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
break;
case NONE_DEV:
printf("[%s] has not loaded a HW device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
break;
......@@ -162,6 +165,7 @@ int openair0_transport_load(openair0_device *device, openair0_config_t *openair0
}
}
return 0;
}
......
targets/ARCH/COMMON/common_lib.h
View file @ b557ccfd
......@@ -90,6 +90,8 @@ typedef enum {
USRP_X300_DEV,
/*!\brief device is BLADE RF*/
BLADERF_DEV,
/*!\brief device is LMSSDR (SoDeRa)*/
LMSSDR_DEV,
/*!\brief device is NONE*/
NONE_DEV,
MAX_RF_DEV_TYPE
......@@ -195,7 +197,8 @@ typedef struct {
char *my_addr;
//! local port number for Ethernet interface (eNB/BBU, UE)
unsigned int my_port;
//! Configuration file for LMS7002M
char *configFilename;
} openair0_config_t;
/*! \brief RF mapping */
......@@ -206,18 +209,27 @@ typedef struct {
int chain;
} openair0_rf_map;
typedef struct {
char *remote_addr;
//! remote port number for Ethernet interface
unsigned int remote_port;
uint16_t remote_port;
//! local IP/MAC addr for Ethernet interface (eNB/BBU, UE)
char *my_addr;
//! local port number for Ethernet interface (eNB/BBU, UE)
unsigned int my_port;
//! local port number for Ethernet interface (eNB/BBU, UE)
uint16_t my_port;
//! local Ethernet interface (eNB/BBU, UE)
char *local_if_name;
//! local port number for Ethernet interface (eNB/BBU, UE)
//! tx_sample_advance for RF + ETH
uint8_t tx_sample_advance;
//! tx_scheduling_advance for RF + ETH
uint8_t tx_scheduling_advance;
//! iq_txshift for RF + ETH
uint8_t iq_txshift;
//! transport type preference (RAW/UDP)
uint8_t transp_preference;
//! radio front end preference (EXMIMO,USRP, BALDERF,LMSSDR)
uint8_t rf_preference;
} eth_params_t;
......@@ -347,7 +359,7 @@ extern "C"
* \param device the hardware to use
*/
openair0_timestamp get_usrp_time(openair0_device *device);
/*! \brief Set RX frequencies
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
......
targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
View file @ b557ccfd
......@@ -344,43 +344,35 @@ int transport_init(openair0_device *device, openair0_config_t *openair0_cfg, eth
/* device specific */
openair0_cfg[0].txlaunch_wait = 0;//manage when TX processing is triggered
openair0_cfg[0].txlaunch_wait_slotcount = 0; //manage when TX processing is triggered
openair0_cfg[0].iq_txshift = 5;// shift
openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
openair0_cfg[0].iq_txshift = eth_params->iq_txshift;// shift
openair0_cfg[0].tx_sample_advance = eth_params->tx_sample_advance;
/* RRH does not have any information to make this configuration atm */
if (device->host_type == BBU_HOST) {
/*Note scheduling advance values valid only for case 7680000 */
switch ((int)openair0_cfg[0].sample_rate) {
case 30720000:
openair0_cfg[0].samples_per_packet = 4096;
openair0_cfg[0].tx_sample_advance = 0;
openair0_cfg[0].tx_scheduling_advance = 22*openair0_cfg[0].samples_per_packet;
openair0_cfg[0].samples_per_packet = 4096;
break;
case 23040000:
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 0;
openair0_cfg[0].tx_scheduling_advance = 16*openair0_cfg[0].samples_per_packet;
break;
case 15360000:
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 0;
openair0_cfg[0].tx_scheduling_advance = 10*openair0_cfg[0].samples_per_packet;
openair0_cfg[0].samples_per_packet = 2048;
break;
case 7680000:
openair0_cfg[0].samples_per_packet = 1024;
openair0_cfg[0].tx_sample_advance = 0;
openair0_cfg[0].tx_scheduling_advance = 10*openair0_cfg[0].samples_per_packet;
openair0_cfg[0].samples_per_packet = 1024;
break;
case 1920000:
openair0_cfg[0].samples_per_packet = 256;
openair0_cfg[0].tx_sample_advance = 0;
openair0_cfg[0].tx_scheduling_advance = 16*openair0_cfg[0].samples_per_packet;
openair0_cfg[0].samples_per_packet = 256;
break;
default:
printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
exit(-1);
break;
}
openair0_cfg[0].tx_scheduling_advance = eth_params->tx_scheduling_advance*openair0_cfg[0].samples_per_packet;
}
device->openair0_cfg=&openair0_cfg[0];
......
targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/CMakeLists.txt 0 → 100644
View file @ b557ccfd
set(si5351_src_files
Si5351C.cpp
)
set(CMAKE_CXX_FLAGS
"${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR} -std=c++11 "
)
add_library(Si5351C STATIC ${si5351_src_files})
target_include_directories(Si5351C PUBLIC ../lms7002m ${CMAKE_CURRENT_SOURCE_DIR})
target_link_libraries(Si5351C LMS7002M)
targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.h 0 → 100644
View file @ b557ccfd
/**
@file Si5351C.h
@brief Header for Si5351C.cpp
@author Lime Microsystems
*/
#ifndef SI5351C_MODULE
#define SI5351C_MODULE
#include <stdio.h>
#include <string>
using namespace std;
//---------------------------------------------------------------------------
enum eSi_CLOCK_INPUT
{
Si_CLKIN,
Si_XTAL,
Si_CMOS
};
struct Si5351_Channel
{
Si5351_Channel() : outputDivider(1), outputFreqHz(1), multisynthDivider(1), pllSource(0),
phaseOffset(0), powered(true), inverted(false), int_mode(false) {};
int outputDivider;
unsigned long outputFreqHz;
float multisynthDivider;
int pllSource;
float phaseOffset;
bool powered;
bool inverted;
bool int_mode;
};
struct Si5351_PLL
{
Si5351_PLL() : inputFreqHz(0), VCO_Hz(0), feedbackDivider(0), CLKIN_DIV(1), CLK_SRC(1) {}
unsigned long inputFreqHz;
float VCO_Hz;
float feedbackDivider;
int CLKIN_DIV;
int CLK_SRC; //0-XTAL, 1-CLKIN
};
class LMScomms;
class Si5351C
{
public:
enum Status
{
SUCCESS,
FAILED,
};
struct StatusBits
{
StatusBits() : sys_init(0), sys_init_stky(0), lol_b(0), lol_b_stky(0), lol_a(0), lol_a_stky(0), los(0), los_stky(0)
{
}
int sys_init;
int sys_init_stky;
int lol_b;
int lol_b_stky;
int lol_a;
int lol_a_stky;
int los;
int los_stky;
};
StatusBits GetStatusBits();
Status ClearStatus();
Si5351C();
~Si5351C();
void Initialize(LMScomms *mng);
bool LoadRegValuesFromFile(string FName);
void SetPLL(unsigned char id, unsigned long CLKIN_Hz, int CLK_SRC);
void SetClock(unsigned char id, unsigned long fOut_Hz, bool enabled = true, bool inverted = false);
Status UploadConfiguration();
Status ConfigureClocks();
void Reset();
private:
void FindVCO(Si5351_Channel *clocks, Si5351_PLL *plls, const unsigned long Fmin, const unsigned long Fmax);
LMScomms *device;
Si5351_PLL PLL[2];
Si5351_Channel CLK[8];
static const unsigned char m_defaultConfiguration[];
unsigned char m_newConfiguration[255];
};
#endif // SI5351C_MODULE
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/CMakeLists.txt 0 → 100644
View file @ b557ccfd
cmake_minimum_required(VERSION 2.8)
set(CMAKE_CONFIGURATION_TYPES "Debug;Release" CACHE TYPE INTERNAL FORCE)
project("lms7api")
#include modules for finding FFTW and CyAPI
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake/Modules/")
cmake_policy(SET CMP0015 OLD)
if(${CMAKE_MAJOR_VERSION} GREATER 2)
cmake_policy(SET CMP0043 NEW)
endif()
ADD_DEFINITIONS(-D_CRT_SECURE_NO_WARNINGS)
if(CMAKE_COMPILER_IS_GNUCXX)
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++0x")
endif()
# set up include-directories
include_directories(
"${PROJECT_SOURCE_DIR}"
"${PROJECT_BINARY_DIR}"
cpp-feather-ini-parser
)
set(LMS7002M_src_files
LMS7002M.cpp
LMS7002M_parameters.cpp
LMS7002M_statuses.cpp
LMS7002M_filtersCalibration.cpp
lmsComms.cpp
LMS7002M_RegistersMap.cpp
)
set(ENABLE_USB_CONNECTION "YES" CACHE BOOL INTERNAL)
set(ENABLE_SPI_CONNECTION "NO" CACHE BOOL INTERNAL)
set(CONNECTION_MANAGER_DIR connectionManager)
set(connectionManager_src_files
${CONNECTION_MANAGER_DIR}/ConnectionManager.cpp
${CONNECTION_MANAGER_DIR}/ConnectionCOM.cpp
${CONNECTION_MANAGER_DIR}/ConnectionManager.h
${CONNECTION_MANAGER_DIR}/ConnectionCOM.h
)
if(ENABLE_USB_CONNECTION)
list(APPEND connectionManager_src_files ${CONNECTION_MANAGER_DIR}/ConnectionUSB.cpp ${CONNECTION_MANAGER_DIR}/ConnectionUSB.h)
add_definitions(-DENABLE_USB_CONNECTION)
endif()
if(ENABLE_SPI_CONNECTION)
list(APPEND connectionManager_src_files ${CONNECTION_MANAGER_DIR}/ConnectionSPI.cpp ${CONNECTION_MANAGER_DIR}/ConnectionSPI.h)
add_definitions(-DENABLE_SPI_CONNECTION)
endif()
add_library(LMS7002M STATIC ${LMS7002M_src_files} ${connectionManager_src_files})
target_include_directories(LMS7002M PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
if(WIN32 AND ENABLE_USB_CONNECTION)
find_package(CyAPI REQUIRED)
LINK_DIRECTORIES(${CYAPI_LIBRARIES})
include_directories(${CYAPI_INCLUDE_DIRS})
set(CONNECTION_MANAGER_LIBS ${CYAPI_LIBRARIES} SetupAPI)
target_link_libraries(LMS7002M ${CONNECTION_MANAGER_LIBS})
endif()
if(UNIX AND ENABLE_USB_CONNECTION)
set(CONNECTION_MANAGER_LIBS usb-1.0 -lpthread)
target_link_libraries(LMS7002M ${CONNECTION_MANAGER_LIBS})
endif()
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.cpp 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.h 0 → 100644
View file @ b557ccfd
/**
@file LMS7002M.h
@author Lime Microsystems (www.limemicro.com)
@brief LMS7002M transceiver configuration interface
*/
#ifndef LMS7API_H
#define LMS7API_H
#include "LMS7002M_statuses.h"
#include "LMS7002M_parameters.h"
#include "typedefs.h"
#include <sstream>
class LMScomms;
class LMS7002M_RegistersMap;
class LMS7002M
{
public:
enum
{
Rx, Tx
};
LMS7002M();
LMS7002M(LMScomms* controlPort);
virtual ~LMS7002M();
///@name Registers writing and reading
liblms7_status UploadAll();
liblms7_status DownloadAll();
bool IsSynced();
liblms7_status ResetChip();
liblms7_status LoadConfig(const char* filename);
liblms7_status SaveConfig(const char* filename);
///@}
///@name Registers writing and reading
uint16_t Get_SPI_Reg_bits(const LMS7Parameter &param, bool fromChip = true);
uint16_t Get_SPI_Reg_bits(uint16_t address, uint8_t msb, uint8_t lsb, bool fromChip = true);
liblms7_status Modify_SPI_Reg_bits(const LMS7Parameter &param, const uint16_t value, bool fromChip = true);
liblms7_status Modify_SPI_Reg_bits(uint16_t address, uint8_t msb, uint8_t lsb, uint16_t value, bool fromChip = true);
liblms7_status SPI_write(uint16_t address, uint16_t data);
uint16_t SPI_read(uint16_t address, bool fromChip = true, liblms7_status *status = 0);
liblms7_status RegistersTest();
///@}
///@name Transmitter, Receiver calibrations
liblms7_status CalibrateRx(float_type bandwidth_MHz);
liblms7_status CalibrateTx(float_type bandwidth_MHz);
///@}
///@name Filters tuning
enum TxFilter
{
TX_LADDER, TX_REALPOLE, TX_HIGHBAND
};
enum RxFilter
{
RX_TIA, RX_LPF_LOWBAND, RX_LPF_HIGHBAND
};
liblms7_status TuneTxFilter(TxFilter filterType, float_type bandwidth_MHz);
liblms7_status TuneTxFilterLowBandChain(float_type ladder_bw_MHz, float_type realpole_bw_MHz);
liblms7_status TuneRxFilter(RxFilter filterType, float_type bandwidth_MHz);
///@}
///@name CGEN and PLL
float_type GetReferenceClk_SX(bool tx);
float_type GetFrequencyCGEN_MHz();
liblms7_status SetFrequencyCGEN(float_type freq_MHz);
float_type GetFrequencySX_MHz(bool tx, float_type refClk_MHz);
liblms7_status SetFrequencySX(bool tx, float_type freq_MHz, float_type refClk_MHz);
///VCO modules available for tuning
enum VCO_Module
{
VCO_CGEN, VCO_SXR, VCO_SXT
};
liblms7_status TuneVCO(VCO_Module module);
///@}
///@name TSP
liblms7_status LoadDC_REG_IQ(bool tx, int16_t I, int16_t Q);
liblms7_status SetNCOFrequency(bool tx, uint8_t index, float_type freq_MHz);
float_type GetNCOFrequency_MHz(bool tx, uint8_t index, float_type refClk_MHz, bool fromChip = true);
liblms7_status SetNCOPhaseOffsetForMode0(bool tx, float_type angle_Deg);
liblms7_status SetNCOPhaseOffset(bool tx, uint8_t index, float_type angle_Deg);
float_type GetNCOPhaseOffset_Deg(bool tx, uint8_t index);
liblms7_status SetGFIRCoefficients(bool tx, uint8_t GFIR_index, const int16_t *coef, uint8_t coefCount);
liblms7_status GetGFIRCoefficients(bool tx, uint8_t GFIR_index, int16_t *coef, uint8_t coefCount);
float_type GetReferenceClk_TSP_MHz(bool tx);
///@}
liblms7_status SetInterfaceFrequency(float_type cgen_freq_MHz, const uint8_t interpolation, const uint8_t decimation);
///enumeration to indicate module registers intervals
enum MemorySection
{
LimeLight = 0, EN_DIR, AFE, BIAS, XBUF, CGEN, LDO, BIST, CDS,
TRF, TBB, RFE, RBB, SX, TxTSP,
TxNCO, TxGFIR1, TxGFIR2, TxGFIR3a, TxGFIR3b, TxGFIR3c,
RxTSP, RxNCO, RxGFIR1, RxGFIR2, RxGFIR3a, RxGFIR3b, RxGFIR3c,
MEMORY_SECTIONS_COUNT
};
virtual liblms7_status SetDefaults(MemorySection module);
LMScomms* GetControlPort() const { return controlPort;};
static const float_type gLadder_lower_limit;
static const float_type gLadder_higher_limit;
static const float_type gRealpole_lower_limit;
static const float_type gRealpole_higher_limit;
static const float_type gHighband_lower_limit;
static const float_type gHighband_higher_limit;
static const float_type gRxTIA_higher_limit;
static const float_type gRxTIA_lower_limit_g1;
static const float_type gRxTIA_lower_limit_g23;
static const float_type gRxLPF_low_lower_limit;
static const float_type gRxLPF_low_higher_limit;
static const float_type gRxLPF_high_lower_limit;
static const float_type gRxLPF_high_higher_limit;
static float_type gVCO_frequency_table[3][2];
static float_type gCGEN_VCO_frequencies[2];
//protected:
LMS7002M_RegistersMap *mRegistersMap;
static const uint16_t readOnlyRegisters[];
static const uint16_t readOnlyRegistersMasks[];
uint16_t MemorySectionAddresses[MEMORY_SECTIONS_COUNT][2];
///@name Algorithms functions
void BackupAllRegisters();
void RestoreAllRegisters();
uint32_t GetRSSI();
void SetRxDCOFF(int8_t offsetI, int8_t offsetQ);
uint32_t FindMinRSSI_Gain(const LMS7Parameter &param, uint16_t *foundValue);
uint32_t FindMinRSSI(const LMS7Parameter &param, const int16_t startValue, int16_t *result, const uint8_t scanWidth, const uint8_t twoCompl, int8_t stepMult = 1);
uint32_t FindMinRSSI(const uint16_t addr, const uint8_t msb, const uint8_t lsb, const int16_t startValue, int16_t *result, const uint8_t scanWidth, const uint8_t twoCompl, int8_t stepMult = 1);
void CalibrateRxDC_RSSI();
liblms7_status CalibrateTxSetup(float_type bandwidth_MHz);
liblms7_status CalibrateRxSetup(float_type bandwidth_MHz);
liblms7_status FixRXSaturation();
void FilterTuning_AdjustGains();
liblms7_status TuneTxFilterSetup(TxFilter type, float_type cutoff_MHz);
liblms7_status TuneRxFilterSetup(RxFilter type, float_type cutoff_MHz);
liblms7_status RFE_TIA_Calibration(float_type TIA_freq_MHz);
liblms7_status RxLPFLow_Calibration(float_type RxLPFL_freq_MHz);
liblms7_status RxLPFHigh_Calibration(float_type RxLPFH_freq_MHz);
liblms7_status RegistersTestInterval(uint16_t startAddr, uint16_t endAddr, uint16_t pattern, std::stringstream &ss);
liblms7_status SPI_write_batch(const uint16_t* spiAddr, const uint16_t* spiData, uint16_t cnt);
liblms7_status SPI_read_batch(const uint16_t* spiAddr, uint16_t* spiData, uint16_t cnt);
liblms7_status Modify_SPI_Reg_mask(const uint16_t *addr, const uint16_t *masks, const uint16_t *values, uint8_t start, uint8_t stop);
///@}
///Reference clock used for Receiver frequency calculations
float_type mRefClkSXR_MHz;
///Reference clock used for Transmitter frequency calculations
float_type mRefClkSXT_MHz;
enum LogType
{
LOG_INFO,
LOG_WARNING,
LOG_ERROR,
LOG_DATA
};
virtual void Log(const char* text, LogType type);
///port used for communicating with LMS7002M
LMScomms* controlPort;
liblms7_status LoadConfigLegacyFile(const char* filename);
};
#endif
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.cpp 0 → 100644
View file @ b557ccfd
#include "LMS7002M_RegistersMap.h"
#include "LMS7002M_parameters.h"
LMS7002M_RegistersMap::LMS7002M_RegistersMap()
{
}
LMS7002M_RegistersMap::~LMS7002M_RegistersMap()
{
}
uint16_t LMS7002M_RegistersMap::GetDefaultValue(uint16_t address) const
{
std::map<uint16_t, Register>::const_iterator iter = mChannelA.find(address);
if( iter != mChannelA.end())
return iter->second.defaultValue;
else
return 0;
}
void LMS7002M_RegistersMap::InitializeDefaultValues(const std::vector<const LMS7Parameter*> parameterList)
{
for(auto parameter : parameterList)
{
uint16_t regValue = mChannelA[parameter->address].defaultValue;
mChannelA[parameter->address].defaultValue = regValue | (parameter->defaultValue << parameter->lsb);
mChannelA[parameter->address].value = mChannelA[parameter->address].defaultValue;
if(parameter->address >= 0x0100)
mChannelB[parameter->address].value = mChannelA[parameter->address].value;
}
}
void LMS7002M_RegistersMap::SetValue(uint8_t channel, const uint16_t address, const uint16_t value)
{
if(channel == 0)
mChannelA[address].value = value;
else if(channel == 1)
mChannelB[address].value = value;
}
uint16_t LMS7002M_RegistersMap::GetValue(uint8_t channel, uint16_t address) const
{
const std::map<const uint16_t, Register> *regMap;
if(channel == 0)
regMap = &mChannelA;
else if(channel == 1)
regMap = &mChannelB;
std::map<const uint16_t, Register>::const_iterator iter;
iter = regMap->find(address);
if (iter != regMap->end())
return iter->second.value;
else
return 0;
}
std::vector<uint16_t> LMS7002M_RegistersMap::GetUsedAddresses(const uint8_t channel) const
{
std::vector<uint16_t> addresses;
if(channel == 0)
for(auto iter : mChannelA)
addresses.push_back(iter.first);
else if(channel == 1)
for(auto iter : mChannelB)
addresses.push_back(iter.first);
return addresses;
}
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.h 0 → 100644
View file @ b557ccfd
#ifndef LMS7002M_REGISTERS_MAP_H
#define LMS7002M_REGISTERS_MAP_H
#include <vector>
#include <map>
#include <typedefs.h>
struct LMS7Parameter;
class LMS7002M_RegistersMap
{
public:
struct Register
{
uint16_t value;
uint16_t defaultValue;
uint16_t mask;
};
LMS7002M_RegistersMap();
~LMS7002M_RegistersMap();
uint16_t GetValue(uint8_t channel, uint16_t address) const;
void SetValue(uint8_t channel, const uint16_t address, const uint16_t value);
void InitializeDefaultValues(const std::vector<const LMS7Parameter*> parameterList);
uint16_t GetDefaultValue(uint16_t address) const;
std::vector<uint16_t> GetUsedAddresses(const uint8_t channel) const;
protected:
std::map<const uint16_t, Register> mChannelA;
std::map<const uint16_t, Register> mChannelB;
};
#endif
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.cpp 0 → 100644
View file @ b557ccfd
/**
@file LMS7002M_statuses.cpp
@author Lime Microsystems (www.limemicro.com)
*/
#include "LMS7002M_statuses.h"
const char* undefinedStatusStr = "undefined status";
const char* liblms7_status2string(liblms7_status status)
{
if (status >= 0 && status < LIBLMS7_STATUS_COUNT)
return liblms7_status_strings[status];
else
return undefinedStatusStr;
}
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.h 0 → 100644
View file @ b557ccfd
/**
@file LMS7002M_statuses.h
@author Lime Microsystems (www.limemicro.com)
@brief LMS7002M control library statuses enumerations
*/
#ifndef LMS7API_STATUSES_H
#define LMS7API_STATUSES_H
const char liblms7_status_strings[][64] =
{
"success",
"failure",
"index out of range",
"too many values",
"connection manager is NULL",
"port not connected",
"frequency out of range",
"cannot deliver frequency",
"VCO is powered down",
"Bad SEL_PATH_RFE",
"Band not selected",
"file not found",
"file invalid format",
};
enum liblms7_status
{
LIBLMS7_SUCCESS = 0,
LIBLMS7_FAILURE,
LIBLMS7_INDEX_OUT_OF_RANGE,
LIBLMS7_TOO_MANY_VALUES,
LIBLMS7_NO_CONNECTION_MANAGER,
LIBLMS7_NOT_CONNECTED,
LIBLMS7_FREQUENCY_OUT_OF_RANGE,
LIBLMS7_CANNOT_DELIVER_FREQUENCY,
LIBLMS7_VCO_IS_POWERED_DOWN,
LIBLMS7_BAD_SEL_PATH,
LIBLMS7_BAND_NOT_SELECTED,
LIBLMS7_FILE_NOT_FOUND,
LIBLMS7_FILE_INVALID_FORMAT,
LIBLMS7_STATUS_COUNT
};
const char* liblms7_status2string(liblms7_status status);
#endif
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionCOM.h 0 → 100644
View file @ b557ccfd
/**
@file ConnectionCOM.h
@author Lime Microsystems (www.limemicro.com)
@brief Class for data communications through COM port
*/
#ifndef CONNECTION_COM_PORT_H
#define CONNECTION_COM_PORT_H
#ifndef __unix__
#include "windows.h"
#endif
#include "IConnection.h"
class ConnectionCOM : public IConnection
{
public:
static const int COM_BUFFER_LENGTH = 1024; //max buffer size for data
ConnectionCOM();
~ConnectionCOM();
DeviceStatus Open();
DeviceStatus Open(unsigned i);
void Close();
bool IsOpen();
int GetOpenedIndex();
int Write(const unsigned char *buffer, int length, int timeout_ms = 0);
int Read(unsigned char *buffer, int length, int timeout_ms = 0);
std::vector<std::string> GetDeviceNames();
int RefreshDeviceList();
void ClearComm();
private:
void FindAllComPorts();
DeviceStatus Open(const char *comName, int baudrate);
bool TestConnectivity();
std::string comPortName;
int comBaudrate;
bool connected;
int currentDeviceIndex;
std::vector<std::string> comPortList;
std::vector<std::string> m_deviceNames;
#ifndef __unix__
HANDLE hComm;
COMMTIMEOUTS m_ctmoNew;
COMMTIMEOUTS m_ctmoOld;
OVERLAPPED m_osROverlap;
OVERLAPPED m_osWOverlap;
DCB m_dcbCommPort;
#else
int hComm; //com port file descriptor
#endif
};
#endif
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.cpp 0 → 100644
View file @ b557ccfd
/**
@file ConnectionManager.cpp
@author Lime Microsystems (www.limemicro.com)
@brief Implementation of various connection types to devices
*/
#include "ConnectionManager.h"
#include "ConnectionCOM.h"
#ifdef ENABLE_USB_CONNECTION
#include "ConnectionUSB.h"
#endif
#ifdef ENABLE_SPI_CONNECTION
#include "ConnectionSPI.h"
#endif
#include <sstream>
#include <iomanip>
#include <iostream>
/** @brief Creates connection interfaces
*/
ConnectionManager::ConnectionManager() : activeControlPort(NULL)
{
mLogData = false;
mOpenedDevice = -1;
m_connections[IConnection::COM_PORT] = new ConnectionCOM();
#ifdef ENABLE_USB_CONNECTION
m_connections[IConnection::USB_PORT] = new ConnectionUSB();
#endif
#ifdef ENABLE_SPI_CONNECTION
m_connections[IConnection::SPI_PORT] = new ConnectionSPI();
#endif
}
/** @brief Destroys connection interfaces
*/
ConnectionManager::~ConnectionManager()
{
for (auto iter = m_connections.begin(); iter != m_connections.end(); ++iter)
{
delete iter->second;
}
}
/** @brief Checks if connection to device is opened
@return True if device is connected
*/
bool ConnectionManager::IsOpen()
{
return activeControlPort ? activeControlPort->IsOpen() : false;
}
/** @brief Opens connection to first available device
@return True if connected to device
*/
bool ConnectionManager::Open()
{
return Open(0);
}
/** @brief Connects to selected device
@param i device index from device list
@return 1:Success, 0:failure
*/
int ConnectionManager::Open(unsigned i)
{
if(i >= mDevices.size())
return 0;
if(activeControlPort)
activeControlPort->Close();
switch(mDevices[i].port)
{
case IConnection::COM_PORT:
activeControlPort = m_connections[IConnection::COM_PORT];
break;
case IConnection::USB_PORT:
activeControlPort = m_connections[IConnection::USB_PORT];
break;
case IConnection::SPI_PORT:
activeControlPort = m_connections[IConnection::SPI_PORT];
break;
default:
return 0;
}
mOpenedDevice = -1;
if( i < mDevices.size() )
{
if( activeControlPort->Open(mDevices[i].portIndex) )
{
mOpenedDevice = i;
return 1;
}
}
return 0;
}
/** @brief Closes connection to device
*/
void ConnectionManager::Close()
{
if(activeControlPort)
{
activeControlPort->Close();
//Notify(LMS_Message(MSG_BOARD_DISCONNECTED, "", 0, 0));
}
mOpenedDevice = -1;
}
/** @brief Finds all currently connected devices and forms device list
@return number of devices found
*/
int ConnectionManager::RefreshDeviceList()
{
mDeviceList.clear();
mDevices.clear();
DeviceInfo dev;
for (auto iter = m_connections.begin(); iter != m_connections.end(); ++iter)
{
vector<string> names;
IConnection *port = iter->second;
if(port->RefreshDeviceList() > 0)
{
names = port->GetDeviceNames();
for(unsigned i=0; i<names.size(); ++i)
{
dev.name = names[i];
dev.port = iter->first;
dev.portIndex = i;
mDevices.push_back(dev);
}
}
}
for(unsigned i=0; i<mDevices.size(); ++i)
mDeviceList.push_back(mDevices[i].name);
return mDevices.size();
}
/** @brief Returns currently opened connection index
*/
int ConnectionManager::GetOpenedIndex()
{
return mOpenedDevice;
}
/** @brief Writes given data to currently opened connection
@param buffer outcomming data buffer
@param length bytes to write
@param timeout_ms timeout in milliseconds
@return number of bytes written, on failure negative values
*/
int ConnectionManager::Write(const unsigned char *buffer, const int length, int timeout_ms)
{
if(activeControlPort)
{
int bytesTransferred = activeControlPort->Write(buffer, length, timeout_ms);
#ifndef NDEBUG
if(mLogData)
{
stringstream ss;
ss << "WR(" << (bytesTransferred>=0?bytesTransferred: 0) << "): ";
ss << std::hex << std::setfill('0');
int repeatedZeros = 0;
for(int i=length-1; i>=0; --i)
if(buffer[i] == 0)
++repeatedZeros;
else break;
if(repeatedZeros == 1)
repeatedZeros = 0;
repeatedZeros = repeatedZeros - (repeatedZeros & 0x1);
for(int i=0; i<length-repeatedZeros; ++i)
//casting to short to print as numbers
ss << " " << std::setw(2) << (unsigned short)buffer[i];
if(repeatedZeros > 1)
ss << " (00 x " << std::dec << repeatedZeros << " times)";
cout << ss.str() << endl;
}
#endif
return bytesTransferred;
}
return -1;
}
/** @brief Receives data from currently opened connection
@param buffer incomming data buffer, must be big enough for length bytes
@param length bytes to read
@param timeout_ms timeout in milliseconds
@return number of bytes received
*/
int ConnectionManager::Read(unsigned char *buffer, int length, int timeout_ms)
{
if(activeControlPort)
{
int bytesTransferred = activeControlPort->Read(buffer, length, timeout_ms);
#ifndef NDEBUG
if(mLogData)
{
stringstream ss;
ss << "RD(" << (bytesTransferred>=0?bytesTransferred: 0) << "): ";
ss << std::hex << std::setfill('0');
int repeatedZeros = 0;
for(int i=length-1; i>=0; --i)
if(buffer[i] == 0)
++repeatedZeros;
else break;
if(repeatedZeros == 2)
repeatedZeros = 0;
repeatedZeros = repeatedZeros - (repeatedZeros & 0x1);
for(int i=0; i<length-repeatedZeros; ++i)
//casting to short to print as numbers
ss << " " << std::setw(2) << (unsigned short)buffer[i];
if(repeatedZeros > 2)
ss << " (00 x " << std::dec << repeatedZeros << " times)";
cout << ss.str() << endl;
}
#endif
return bytesTransferred;
}
return -1;
}
int ConnectionManager::WriteStream(const char *buffer, int length)
{
return 0;
}
int ConnectionManager::ReadStream(char *buffer, int length, unsigned int timeout_ms)
{
/*int handle = activeControlPort->BeginDataReading(buffer, length);
activeControlPort->WaitForReading(handle, timeout_ms);
long received = length;
activeControlPort->FinishDataReading(buffer, received, handle);
return received;
*/
long len = length;
int status = activeControlPort->ReadDataBlocking(buffer, len, 0);
return len;
}
int ConnectionManager::BeginDataReading(char *buffer, long length)
{
return activeControlPort->BeginDataReading(buffer, length);
}
/**
@brief Blocks until data is received or set number of milliseconds have passed.
@param contextHandle handle returned by BeginDataReading()
@param timeout_ms number of milliseconds to wait
@return 1-data received, 0-data not received
*/
int ConnectionManager::WaitForReading(int contextHandle, unsigned int timeout_ms)
{
return activeControlPort->WaitForReading(contextHandle, timeout_ms);
}
/**
@brief Finished asynchronous data reading.
@param buffer where to put received data
@param length number of bytes to read, will be changed to actual number of bytes received
@param contextHandle context handle returned by BeginDataReading()
@return received data length
*/
int ConnectionManager::FinishDataReading(char *buffer, long &length, int contextHandle)
{
return activeControlPort->FinishDataReading(buffer, length, contextHandle);
}
/**
@brief Aborts reading operations
*/
void ConnectionManager::AbortReading()
{
activeControlPort->AbortReading();
}
/**
@brief Start asynchronous data sending.
@param buffer data buffer to be sent
@param length number of bytes to send.
@return context handle
*/
int ConnectionManager::BeginDataSending(const char *buffer, long length)
{
return activeControlPort->BeginDataSending(buffer, length);
}
/**
@brief Blocks until data is sent or set number of miliseconds have passed.
@param contextHandle handle returned by BeginDataReading()
@param timeout_ms number of miliseconds to wait
@return 1-data sent, 0-data not sent
*/
int ConnectionManager::WaitForSending(int contextHandle, unsigned int timeout_ms)
{
return activeControlPort->WaitForSending(contextHandle, timeout_ms);
}
/**
@brief Finished asynchronous data sending.
@param buffer where to put received data
@param length number of bytes to send, will be changed to actual number of bytes sent
@param contextHandle context handle returned by BeginDataReading()
@return sent data length
*/
int ConnectionManager::FinishDataSending(const char *buffer, long &length, int contextHandle)
{
return activeControlPort->FinishDataSending(buffer, length, contextHandle);
}
/**
@brief Aborts sending operations
*/
void ConnectionManager::AbortSending()
{
activeControlPort->AbortSending();
}
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.h 0 → 100644
View file @ b557ccfd
/**
@file ConnectionManager.h
@author Lime Microsystems (www.limemicro.com)
@brief Class for managing connection to devices
*/
#ifndef LMS_CONNECTION_MANAGER_H
#define LMS_CONNECTION_MANAGER_H
#include "IConnection.h"
#include <map>
class ConnectionManager
{
public:
struct DeviceInfo
{
std::string name;
IConnection::eConnectionType port;
int portIndex;
};
ConnectionManager();
~ConnectionManager();
bool IsOpen();
bool Open();
int Open(unsigned i);
void Close();
int RefreshDeviceList();
int GetOpenedIndex();
std::vector<std::string> GetDeviceList(){return mDeviceList;};
int Write(const unsigned char *buffer, int length, int timeout_ms = 0);
int Read(unsigned char *buffer, int length, int timeout_ms = 0);
int WriteStream(const char *buffer, int length);
int ReadStream(char *buffer, int length, unsigned int timeout_ms);
int BeginDataReading(char *buffer, long length);
int WaitForReading(int contextHandle, unsigned int timeout_ms);
int FinishDataReading(char *buffer, long &length, int contextHandle);
void AbortReading();
int BeginDataSending(const char *buffer, long length);
int WaitForSending(int contextHandle, unsigned int timeout_ms);
int FinishDataSending(const char *buffer, long &length, int contextHandle);
void AbortSending();
protected:
bool mLogData;
/// Port used for communication.
IConnection *activeControlPort;
std::vector<DeviceInfo> mDevices;
std::vector<std::string> mDeviceList;
int mOpenedDevice;
std::map<IConnection::eConnectionType, IConnection*> m_connections;
};
#endif // LMS_CONNECTION_MANAGER_H
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/merge.ini 0 → 100644
View file @ b557ccfd
[NewSection]
Key=Value
[Section2]
NewKey=Value
123=456
\ No newline at end of file
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lms7002_defines.h 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.cpp 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.h 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/typedefs.h 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/CMakeLists.txt 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.cpp 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.h 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/fifo.h 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/ringBuffer.h 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/sodera_lib.cpp 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini 0 → 100644
View file @ b557ccfd
This diff is collapsed.
targets/RT/USER/.#lte-softmodem.c deleted 120000 → 0
View file @ 1657e089
This diff is collapsed.
targets/RT/USER/dot11.c deleted 100644 → 0
View file @ 1657e089
This diff is collapsed.
targets/RT/USER/eNB_transport_IQ.c
View file @ b557ccfd
This diff is collapsed.
targets/RT/USER/ieee80211p-softmodem.c deleted 100644 → 0
View file @ 1657e089
This diff is collapsed.
targets/RT/USER/lte-softmodem.c
View file @ b557ccfd
This diff is collapsed.
targets/RT/USER/lte-ue.c
View file @ b557ccfd
This diff is collapsed.
targets/RT/USER/rrh_gw.c
View file @ b557ccfd
This diff is collapsed.
targets/RT/USER/rrh_gw_externs.h
View file @ b557ccfd
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment