Skip to content

O
OpenXG-RAN
Commit bc14704c authored by Lionel Gauthier's avatar Lionel Gauthier
Browse files
Options

cleanup, comments 


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@7530 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 7fe2b4bd
Hide whitespace changes
Inline Side-by-side
Showing with 73 additions and 122 deletions
cmake_targets/build_oai
View file @ bc14704c
...@@ -44,6 +44,7 @@ XFORMS="False" ...@@ -44,6 +44,7 @@ XFORMS="False"
VCD_TIMING="False" VCD_TIMING="False"
REL="Rel10" REL="Rel10"
HW="EXMIMO" HW="EXMIMO"
EPC=0
function print_help() { function print_help() {
echo_info ' echo_info '
...@@ -337,7 +338,7 @@ function main() { ...@@ -337,7 +338,7 @@ function main() {
# EXMIMO drivers & firmware loader # EXMIMO drivers & firmware loader
############### ###############
if [ "$HW" = "EXMIMO" ] ; then if [ "$HW" = "EXMIMO" -a "$EPC" = "0" ] ; then
echo_info "Compiling Express MIMO 2 board drivers" echo_info "Compiling Express MIMO 2 board drivers"
mkdir -p $DIR/lte_noS1_build_oai/build mkdir -p $DIR/lte_noS1_build_oai/build
...@@ -453,70 +454,14 @@ function main() { ...@@ -453,70 +454,14 @@ function main() {
################## ##################
if [ "$EPC" = "1" ] ; then if [ "$EPC" = "1" ] ; then
echo_info "Compiling EPC" echo_info "Compiling EPC"
cmake_file=$DIR/epc_build_oai/CMakeLists.txt
cp $DIR/epc_build_oai/CMakeLists.template $cmake_file
echo "set(ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
[ "$CLEAN" = "1" ] && rm -rf $DIR/epc_build_oai/build
mkdir -p $DIR/epc_build_oai/build
cd $DIR/epc_build_oai/build
cmake ..
compilations \
epc_build_oai mme_gw \
mme_gw $dbin/mme_gw.$REL
# Only integrated mme+sgw+pgw is operational today
# compilations \
# epc_build_oai oai_sgw \
# oai_sgw $dbin/oai_sgw.$REL
compilations \
epc_build_oai xt_GTPUAH_lib \
libxt_GTPUAH_lib.so $dbin
compilations \
epc_build_oai xt_GTPURH_lib \
libxt_GTPURH_lib.so $dbin
compilations \
epc_build_oai xt_GTPURH \
CMakeFiles/xt_GTPURH/xt_GTPURH.ko $dbin
compilations \
epc_build_oai xt_GTPUAH \
CMakeFiles/xt_GTPUAH/xt_GTPUAH.ko $dbin
# Example HSS and EPC run on the same host # Example HSS and EPC run on the same host
if [ "$CLEAN" = "1" ]; then if [ "$CLEAN" = "1" ]; then
$OPENAIR_DIR/cmake_targets/tools/build_epc --clean --debug --transport-tcp-only --transport-prefer-tcp --s6a-server
$OPENAIR_DIR/cmake_targets/tools/build_hss --clean --debug --transport-tcp-only --transport-prefer-tcp --fqdn `hostname --fqdn` --connect-to-mme `hostname --fqdn` $OPENAIR_DIR/cmake_targets/tools/build_hss --clean --debug --transport-tcp-only --transport-prefer-tcp --fqdn `hostname --fqdn` --connect-to-mme `hostname --fqdn`
else else
$OPENAIR_DIR/cmake_targets/tools/build_epc --debug --transport-tcp-only --transport-prefer-tcp --s6a-server
$OPENAIR_DIR/cmake_targets/tools/build_hss --debug --transport-tcp-only --transport-prefer-tcp --fqdn `hostname --fqdn` --connect-to-mme `hostname --fqdn` $OPENAIR_DIR/cmake_targets/tools/build_hss --debug --transport-tcp-only --transport-prefer-tcp --fqdn `hostname --fqdn` --connect-to-mme `hostname --fqdn`
fi fi
# example HHS and EPC run on separate hosts (can use SCTP)
# $OPENAIR_DIR/cmake_targets/tools/build_hss --debug
echo_info "Copying iptables libraries into system directory: /lib/xtables"
if [ -f $dbin/libxt_GTPURH_lib.so ] ; then
$SUDO rm -f /lib/xtables/libxt_GTPURH.so /lib/xtables/libxt_GTPUAH.so
$SUDO ln -s $dbin/libxt_GTPURH_lib.so /lib/xtables/libxt_GTPURH.so
$SUDO ln -s $dbin/libxt_GTPUAH_lib.so /lib/xtables/libxt_GTPUAH.so
else
echo_warning "not installed GTP-U iptables: binaries not found"
fi
dconf=$OPENAIR_DIR/targets/bin
mkdir -p $dconf
#cp $ORIGIN_PATH/$CONFIG_FILE $dconf || echo_error "config file $ORIGIN_PATH/$CONFIG_FILE not found"
# Do EPC
if [ -f $DIR/epc_build_oai/build/mme_fd.conf ] ; then
cp $DIR/epc_build_oai/build/epc.*.conf $dconf
$SUDO cp -uv $DIR/epc_build_oai/build/mme_fd.conf $FREEDIAMETER_PREFIX/etc/freeDiameter
else
echo_warning "not installed EPC config files: not found"
fi
# Do HSS
# bash doesn't like space char around = char
cp -uv $DIR/hss_build/build/hss.conf $dbin
$SUDO cp -uv $DIR/hss_build/build/hss_fd.conf $DIR/hss_build/build/acl.conf $FREEDIAMETER_PREFIX/etc/freeDiameter
# if [ "$INSTALL_SYSTEM_FILES" = "1" ] ;then # if [ "$INSTALL_SYSTEM_FILES" = "1" ] ;then
# if [ -f $dbin/hss.conf ] ; then # if [ -f $dbin/hss.conf ] ; then
......
cmake_targets/tools/build_epc
View file @ bc14704c
...@@ -51,16 +51,26 @@ function help() ...@@ -51,16 +51,26 @@ function help()
echo_error " -C, --conf-files-only Generate only EPC configuration files (no build)" echo_error " -C, --conf-files-only Generate only EPC configuration files (no build)"
echo_error " -d, --debug Compile with debug informations." echo_error " -d, --debug Compile with debug informations."
echo_error " -h, --help Print this help." echo_error " -h, --help Print this help."
echo_error " -g, --gtpu-easy-module Used for debugging GTPU (kernel module can be easily removed)" echo_error " -g, --gtpu-easy-module Used for debugging GTPU (kernel module can be easily removed, for dev and debug purpose only)"
echo_error " -G, --gtpu-full-speed Best GTPU throughput performance, but cannot be removed (default)." echo_error " -G, --gtpu-full-speed Best GTPU throughput performance, but cannot be removed (default)."
echo_error " -H, --hss hostname HSS hostname (with FQDN), default is this host (hostname)." echo_error " -H, --hss hostname HSS hostname (with FQDN), default is this host (`hostname --fqdn`)."
echo_error " -i, --check-installed-software Check installed software packages necessary to build and run EPC (support Ubuntu 14.04)." echo_error " -i, --check-installed-software Check installed software packages necessary to build and run EPC (support Ubuntu 14.04)."
echo_error " -r, --realm realm Realm of the MME (if not specified, is extracted from this host FQDN)." l_realm=`hostname --fqdn`
l_realm=${l_realm#*.}
echo_error " -r, --realm realm Realm of the MME (if not specified, is extracted from this host FQDN ($l_realm))."
echo_error " -s, --transport-sctp-only Diameter use SCTP only (TCP disabled)." echo_error " -s, --transport-sctp-only Diameter use SCTP only (TCP disabled)."
echo_error " -S, --s6a-server MME act as a server on s6a interface (useful when HSS and MME/EPC run on the same host)." echo_error " -S, --s6a-server MME act as a server on s6a interface (useful when HSS and MME/EPC run on the same host)."
echo_error " -t, --transport-tcp-only Diameter use TCP only (SCTP disabled)." echo_error " -t, --transport-tcp-only Diameter use TCP only (SCTP disabled)."
echo_error " -T, --transport-prefer-tcp Diameter prefer TCP." echo_error " -T, --transport-prefer-tcp Diameter prefer TCP."
echo_error " -v, --verbose Build process verbose." echo_error " -v, --verbose Build process verbose."
echo_error " "
echo_error "Examples:"
echo_error " "
echo_error "Case 1 - EPC run on same HSS host"
echo_error "build_epc -d -S -t -T"
echo_error " "
echo_error "Case 2 - EPC and HSS do not run on same host"
echo_error "build_epc -d -s -H my_hss_fqdn"
} }
......
cmake_targets/tools/build_hss
View file @ bc14704c
...@@ -65,6 +65,16 @@ function help() ...@@ -65,6 +65,16 @@ function help()
echo_error " -t, --transport-tcp-only Diameter use TCP (SCTP disabled)." echo_error " -t, --transport-tcp-only Diameter use TCP (SCTP disabled)."
echo_error " -T, --transport-prefer-tcp Diameter prefer TCP." echo_error " -T, --transport-prefer-tcp Diameter prefer TCP."
echo_error " -v, --verbose Build process verbose." echo_error " -v, --verbose Build process verbose."
echo_error " "
echo_error "Examples:"
echo_error " "
echo_error "Case 1 - HSS run on same EPC host"
echo_error "build_hss -d -m my_epc_fqdn -d -t -T"
echo_error "or build_hss -d -m my_epc_fqdn -d -t -T -k 11111111111111111111111111111111"
echo_error " "
echo_error "Case 2 - HSS and EPC do not run on same host"
echo_error "build_hss -d -s"
echo_error "build_hss -d -s -k 11111111111111111111111111111111"
} }
......
cmake_targets/tools/epc.conf.in
View file @ bc14704c
MME : MME :
{ {
REALM = "@REALM@"; REALM = "@REALM@"; # DO NOT CHANGE
# Define the limits of the system in terms of served eNB and served UE. # Define the limits of the system in terms of served eNB and served UE.
# When the limits will be reached, overload procedure will take place. # When the limits will be reached, overload procedure will take place.
MAXENB = 10; MAXENB = 10;
MAXUE = 100; MAXUE = 100;
RELATIVE_CAPACITY = 10; RELATIVE_CAPACITY = 10;
# Display statistics about whole system (expressed in seconds) # Display statistics about whole system (expressed in seconds)
MME_STATISTIC_TIMER = 10; MME_STATISTIC_TIMER = 10;
EMERGENCY_ATTACH_SUPPORTED = "no"; EMERGENCY_ATTACH_SUPPORTED = "no";
UNAUTHENTICATED_IMSI_SUPPORTED = "no"; UNAUTHENTICATED_IMSI_SUPPORTED = "no";
# VERBOSITY: none, info, annoying # ASN1 VERBOSITY: none, info, annoying
VERBOSITY = "none"; VERBOSITY = "none";
...@@ -26,8 +26,8 @@ MME : ...@@ -26,8 +26,8 @@ MME :
S6A : S6A :
{ {
S6A_CONF = "@FREEDIAMETER_PATH@/../etc/freeDiameter/mme_fd.conf"; S6A_CONF = "@FREEDIAMETER_PATH@/../etc/freeDiameter/mme_fd.conf";# DO NOT CHANGE
HSS_HOSTNAME = "@HSS_HOSTNAME@"; HSS_HOSTNAME = "@HSS_HOSTNAME@"; # DO NOT CHANGE
}; };
# ------- SCTP definitions # ------- SCTP definitions
...@@ -62,7 +62,7 @@ MME : ...@@ -62,7 +62,7 @@ MME :
# max values = 999.999:65535 # max values = 999.999:65535
# maximum of 32 values, comma separated # maximum of 32 values, comma separated
PLMN = ( PLMN = (
{MCC="208" ; MNC="93"; TAC = "1"; } {MCC="208" ; MNC="95"; TAC = "1"; } # YOUR PLMN CONFIG HERE
); );
}; };
...@@ -76,8 +76,8 @@ MME : ...@@ -76,8 +76,8 @@ MME :
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
MME_INTERFACE_NAME_FOR_S1_MME = "eth2"; MME_INTERFACE_NAME_FOR_S1_MME = "eth2"; # YOUR NETWORK CONFIG HERE
MME_IPV4_ADDRESS_FOR_S1_MME = "192.168.27.101//24"; MME_IPV4_ADDRESS_FOR_S1_MME = "192.168.27.101//24"; # YOUR NETWORK CONFIG HERE
MME_INTERFACE_NAME_FOR_S11_MME = "none"; MME_INTERFACE_NAME_FOR_S11_MME = "none";
MME_IPV4_ADDRESS_FOR_S11_MME = "0.0.0.0/24"; MME_IPV4_ADDRESS_FOR_S11_MME = "0.0.0.0/24";
...@@ -91,48 +91,41 @@ S-GW : ...@@ -91,48 +91,41 @@ S-GW :
SGW_INTERFACE_NAME_FOR_S11 = "none"; SGW_INTERFACE_NAME_FOR_S11 = "none";
SGW_IPV4_ADDRESS_FOR_S11 = "0.0.0.0/24"; SGW_IPV4_ADDRESS_FOR_S11 = "0.0.0.0/24";
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "eth2"; SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "eth2"; # YOUR NETWORK CONFIG HERE
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.168.27.101/24"; # YOUR NETWORK CONFIG HERE
SGW_IPV4_PORT_FOR_S1U_S12_S4_UP = 2152; # PREFER NOT CHANGE
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.168.27.101/24"; SGW_INTERFACE_NAME_FOR_S5_S8_UP = "none"; # DO NOT CHANGE
# TODO PORT NUMBER SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "0.0.0.0/24"; # DO NOT CHANGE
SGW_IPV4_PORT_FOR_S1U_S12_S4_UP = 2152;
SGW_INTERFACE_NAME_FOR_S5_S8_UP = "none";
SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "0.0.0.0/24";
}; };
# Only for tests
SGW_DROP_UPLINK_S1U_TRAFFIC = "no";
# Only for tests
SGW_DROP_DOWNLINK_S1U_TRAFFIC = "no";
}; };
P-GW = P-GW =
{ {
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
PGW_INTERFACE_NAME_FOR_S5_S8 = "none"; PGW_INTERFACE_NAME_FOR_S5_S8 = "none"; # DO NOT CHANGE
PGW_IPV4_ADDRESS_FOR_S5_S8 = "0.0.0.0/24"; PGW_IPV4_ADDRESS_FOR_S5_S8 = "0.0.0.0/24"; # DO NOT CHANGE
PGW_INTERFACE_NAME_FOR_SGI = "eth0"; PGW_INTERFACE_NAME_FOR_SGI = "eth0"; # YOUR NETWORK CONFIG HERE
PGW_IPV4_ADDRESS_FOR_SGI = "192.168.12.213/24"; PGW_IPV4_ADDRESS_FOR_SGI = "192.168.12.213/24"; # YOUR NETWORK CONFIG HERE
# Option available only if GTPU in kernel configured PGW_MASQUERADE_SGI = "yes"; # YOUR NETWORK CONFIG HERE
PGW_MASQUERADE_SGI = "yes";
}; };
IP_ADDRESS_POOL : IP_ADDRESS_POOL :
{ {
IPV4_LIST = ( IPV4_LIST = (
"192.188.0.0/24", "192.188.0.0/24", # YOUR NETWORK CONFIG HERE
"192.188.1.0/24" "192.188.1.0/24" # YOUR NETWORK CONFIG HERE
); );
IPV6_LIST = ( IPV6_LIST = (
"2014:02:26::0/120" "2014:02:26::0/120" # YOUR NETWORK CONFIG HERE
); );
}; };
#WARNING DNS ARE HARDCODED IN openair-cn/NAS/EURECOM-NAS/src/esm/msg/ActivateDefaultEpsBearerContextRequest.c:305 #WARNING DNS ARE HARDCODED IN openair-cn/NAS/EURECOM-NAS/src/esm/msg/ActivateDefaultEpsBearerContextRequest.c:305
DEFAULT_DNS_1_IPV4_ADDRESS = "192.168.12.100"; DEFAULT_DNS_1_IPV4_ADDRESS = "192.168.12.100"; # YOUR NETWORK CONFIG HERE
DEFAULT_DNS_2_IPV4_ADDRESS = "192.168.106.12"; DEFAULT_DNS_2_IPV4_ADDRESS = "192.168.106.12"; # YOUR NETWORK CONFIG HERE
}; };
cmake_targets/tools/epc.local.enb.conf.in
View file @ bc14704c
MME : MME :
{ {
REALM = "@REALM@"; REALM = "@REALM@"; # DO NOT CHANGE
# Define the limits of the system in terms of served eNB and served UE. # Define the limits of the system in terms of served eNB and served UE.
# When the limits will be reached, overload procedure will take place. # When the limits will be reached, overload procedure will take place.
MAXENB = 10; MAXENB = 10;
...@@ -11,7 +11,7 @@ MME : ...@@ -11,7 +11,7 @@ MME :
MME_STATISTIC_TIMER = 10; MME_STATISTIC_TIMER = 10;
EMERGENCY_ATTACH_SUPPORTED = "no"; EMERGENCY_ATTACH_SUPPORTED = "no";
UNAUTHENTICATED_IMSI_SUPPORTED = "no"; UNAUTHENTICATED_IMSI_SUPPORTED = "no";
# VERBOSITY: none, info, annoying # ASN1 VERBOSITY: none, info, annoying
VERBOSITY = "none"; VERBOSITY = "none";
...@@ -26,8 +26,8 @@ MME : ...@@ -26,8 +26,8 @@ MME :
S6A : S6A :
{ {
S6A_CONF = "@FREEDIAMETER_PATH@/../etc/freeDiameter/mme_fd.conf"; S6A_CONF = "@FREEDIAMETER_PATH@/../etc/freeDiameter/mme_fd.conf";# DO NOT CHANGE
HSS_HOSTNAME = "@HSS_HOSTNAME@"; HSS_HOSTNAME = "@HSS_HOSTNAME@"; # DO NOT CHANGE
}; };
# ------- SCTP definitions # ------- SCTP definitions
...@@ -62,7 +62,8 @@ MME : ...@@ -62,7 +62,8 @@ MME :
# max values = 999.999:65535 # max values = 999.999:65535
# maximum of 32 values, comma separated # maximum of 32 values, comma separated
PLMN = ( PLMN = (
{MCC="208" ; MNC="93"; TAC = "1"; } {MCC="208" ; MNC="95"; TAC = "1"; }, # YOUR PLMN CONFIG HERE
{MCC="208" ; MNC="10"; TAC = "1"; } # YOUR PLMN CONFIG HERE
); );
}; };
...@@ -76,8 +77,8 @@ MME : ...@@ -76,8 +77,8 @@ MME :
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
MME_INTERFACE_NAME_FOR_S1_MME = "tun2"; MME_INTERFACE_NAME_FOR_S1_MME = "tun2"; # DO NOT CHANGE
MME_IPV4_ADDRESS_FOR_S1_MME = "192.188.2.2/24"; MME_IPV4_ADDRESS_FOR_S1_MME = "192.188.2.2/24"; # DO NOT CHANGE
MME_INTERFACE_NAME_FOR_S11_MME = "none"; MME_INTERFACE_NAME_FOR_S11_MME = "none";
MME_IPV4_ADDRESS_FOR_S11_MME = "0.0.0.0/24"; MME_IPV4_ADDRESS_FOR_S11_MME = "0.0.0.0/24";
...@@ -91,47 +92,41 @@ S-GW : ...@@ -91,47 +92,41 @@ S-GW :
SGW_INTERFACE_NAME_FOR_S11 = "none"; SGW_INTERFACE_NAME_FOR_S11 = "none";
SGW_IPV4_ADDRESS_FOR_S11 = "0.0.0.0/24"; SGW_IPV4_ADDRESS_FOR_S11 = "0.0.0.0/24";
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "lo"; SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "lo"; # DO NOT CHANGE
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "127.0.0.1/24"; SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "127.0.0.1/24"; # DO NOT CHANGE
# TODO PORT NUMBER SGW_IPV4_PORT_FOR_S1U_S12_S4_UP = 2152; # PREFER NOT CHANGE
SGW_IPV4_PORT_FOR_S1U_S12_S4_UP = 2152;
SGW_INTERFACE_NAME_FOR_S5_S8_UP = "none"; SGW_INTERFACE_NAME_FOR_S5_S8_UP = "none"; # DO NOT CHANGE
SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "0.0.0.0/24"; SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "0.0.0.0/24"; # DO NOT CHANGE
}; };
# Only for tests
SGW_DROP_UPLINK_S1U_TRAFFIC = "no";
# Only for tests
SGW_DROP_DOWNLINK_S1U_TRAFFIC = "no";
}; };
P-GW = P-GW =
{ {
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
PGW_INTERFACE_NAME_FOR_S5_S8 = "none"; PGW_INTERFACE_NAME_FOR_S5_S8 = "none"; # DO NOT CHANGE
PGW_IPV4_ADDRESS_FOR_S5_S8 = "0.0.0.0/24"; PGW_IPV4_ADDRESS_FOR_S5_S8 = "0.0.0.0/24"; # DO NOT CHANGE
PGW_INTERFACE_NAME_FOR_SGI = "eth0"; PGW_INTERFACE_NAME_FOR_SGI = "eth0"; # YOUR NETWORK CONFIG HERE
PGW_IPV4_ADDRESS_FOR_SGI = "192.168.12.213/24"; PGW_IPV4_ADDRESS_FOR_SGI = "192.168.12.213/24"; # YOUR NETWORK CONFIG HERE
# Option available only if GTPU in kernel configured PGW_MASQUERADE_SGI = "yes"; # YOUR NETWORK CONFIG HERE
PGW_MASQUERADE_SGI = "yes";
}; };
IP_ADDRESS_POOL : IP_ADDRESS_POOL :
{ {
IPV4_LIST = ( IPV4_LIST = (
"192.187.0.0/24", "192.187.0.0/24", # YOUR NETWORK CONFIG HERE
"192.187.1.0/24" "192.187.1.0/24" # YOUR NETWORK CONFIG HERE
); );
IPV6_LIST = ( IPV6_LIST = (
"2014:02:26::0/120" "2014:02:26::0/120" # YOUR NETWORK CONFIG HERE
); );
}; };
#WARNING DNS ARE HARDCODED IN openair-cn/NAS/EURECOM-NAS/src/esm/msg/ActivateDefaultEpsBearerContextRequest.c:305 #WARNING DNS ARE HARDCODED IN openair-cn/NAS/EURECOM-NAS/src/esm/msg/ActivateDefaultEpsBearerContextRequest.c:305
DEFAULT_DNS_1_IPV4_ADDRESS = "192.168.12.100"; DEFAULT_DNS_1_IPV4_ADDRESS = "192.168.12.100"; # YOUR NETWORK CONFIG HERE
DEFAULT_DNS_2_IPV4_ADDRESS = "192.168.106.12"; DEFAULT_DNS_2_IPV4_ADDRESS = "192.168.106.12"; # YOUR NETWORK CONFIG HERE
}; };
cmake_targets/tools/run_hss
View file @ bc14704c
...@@ -80,8 +80,6 @@ function main() ...@@ -80,8 +80,6 @@ function main()
esac esac
done done
check_for_root_rights
set_openair_env set_openair_env
cecho "OPENAIR_DIR = $OPENAIR_DIR" $green cecho "OPENAIR_DIR = $OPENAIR_DIR" $green
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment