Skip to content

O
OpenXG-RAN
Commit ee350140 authored by Boris Djalal's avatar Boris Djalal
Browse files
Options

Add configuration files. Ping the UE from the eNB. 

Signed-off-by: default avatarBoris Djalal <boris.djalal@eurecom.fr>
parent 367f8905
Hide whitespace changes
Inline Side-by-side
Showing with 354 additions and 21 deletions
ci-scripts/conf_files/rcc.band7.nos1.simulator.conf 0 → 100644
View file @ ee350140
Active_eNBs = ( "eNB-Eurecom-LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
# real_time choice in {hard, rt-preempt, no}
real_time = "no";
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -104;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "127.0.0.3";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "127.0.0.2/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_if_name = "ens3";
remote_address = "CI_UE_IP_ADDR";
local_address = "CI_ENB_IP_ADDR";
local_portc = 50000;
remote_portc = 50000;
local_portd = 50001;
remote_portd = 50001;
local_rf = "no"
tr_preference = "udp_if4p5"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
eNB_instances = [0];
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
ci-scripts/conf_files/rru.band7.nos1.simulator.conf 0 → 100644
View file @ ee350140
RUs = (
{
local_if_name = "ens3";
remote_address = "CI_ENB_IP_ADDR"
local_address = "CI_UE_IP_ADDR";
local_portc = 50000;
remote_portc = 50000;
local_portd = 50001;
remote_portd = 50001;
local_rf = "yes"
tr_preference = "udp_if4p5";
nb_tx = 1;
nb_rx = 1;
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
bands = [7];
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
ci-scripts/runTestOnVM.sh
View file @ ee350140
...@@ -103,12 +103,6 @@ function start_basic_sim_ue { ...@@ -103,12 +103,6 @@ function start_basic_sim_ue {
echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1 echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1 echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1 echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
FILE=./my-lte-uesoftmodem-run.sh
if [ -f $FILE ]; then
echo "File $FILE exists."
else
echo "File $FILE does not exist."
fi
echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1 echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
echo "cat ./my-lte-uesoftmodem-run.sh" >> $1 echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE; fi" >> $1 echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE; fi" >> $1
...@@ -147,11 +141,32 @@ function get_ue_ip_addr { ...@@ -147,11 +141,32 @@ function get_ue_ip_addr {
} }
function ping_ue_ip_addr { function ping_ue_ip_addr {
echo "echo \"ping -c 20 $3\"" > $1 echo "CALL ping_ue_ip_addr"
echo '$@' $@
echo "echo \"COMMAND IS: ping -c 20 $3\" > $4" > $1 echo "echo \"COMMAND IS: ping -c 20 $3\" > $4" > $1
echo "ping -c 20 $UE_IP_ADDR | tee -a $4" >> $1 echo "rm -f $4" >> $1
echo "echo \"ping -c 20 $3\"" >> $1
echo "ping -c 20 $UE_REAL_IP_ADDR | tee -a $4" >> $1
echo "command generated by ping_ue_ip_addr:"
cat $1
echo "end of command generated by ping_ue_ip_addr"
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1 ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1 rm -f $1
echo "END ping_ue_ip_addr"
}
function ping_no_s1_ue_ip_addr {
echo "CALL ping_ue_ip_addr"
echo '$@' $@
echo "echo \"COMMAND IS: ping -I oai0 -c 20 $3\" > $4" > $1
echo "rm -f $4" >> $1
echo "ping -I oai0 -c 20 $UE_REAL_IP_ADDR | tee -a $4" >> $1
echo "command generated by ping_ue_ip_addr:"
cat $1
echo "end of command generated by ping_ue_ip_addr"
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1
echo "END ping_ue_ip_addr"
} }
function ping_epc_ip_addr { function ping_epc_ip_addr {
...@@ -299,6 +314,7 @@ function recover_core_dump { ...@@ -299,6 +314,7 @@ function recover_core_dump {
} }
function start_nos1_sim_enb { function start_nos1_sim_enb {
# start_nos1_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.nos1.simulator.conf
local LOC_VM_IP_ADDR=$2 local LOC_VM_IP_ADDR=$2
local LOC_UE_IP_ADDR=$3 local LOC_UE_IP_ADDR=$3
local LOC_LOG_FILE=$4 local LOC_LOG_FILE=$4
...@@ -324,11 +340,19 @@ function start_nos1_sim_enb { ...@@ -324,11 +340,19 @@ function start_nos1_sim_enb {
echo "echo \"ulimit -c unlimited && ./lte-softmodem-nos1 -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1 echo "echo \"ulimit -c unlimited && ./lte-softmodem-nos1 -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1 echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1 echo "cat ./my-lte-softmodem-run.sh" >> $1
echo "sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" >> $1
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_noS1_build_oai/build -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1 echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_noS1_build_oai/build -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
# echo " ========================================================"
# echo "BEGIN start_nos1_sim_enb command"
# cat $1
# echo "END start_nos1_sim_enb command"
# echo " ========================================================"
ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1 ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
sleep 10 echo " ========================================================"
sleep 20
rm $1 rm $1
echo " ========================================================"
# marker is "eNB L1 are configured"
} }
function stop_nos1_sim_enb { function stop_nos1_sim_enb {
...@@ -353,9 +377,9 @@ function stop_nos1_sim_enb { ...@@ -353,9 +377,9 @@ function stop_nos1_sim_enb {
} }
function start_nos1_sim_ue { function start_nos1_sim_ue {
# start_nos1_sim_ue $UE_VM_CMDS $VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 rru.band7.nos1.simulator.conf # start_nos1_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 rru.band7.nos1.simulator.conf
local LOC_VM_IP_ADDR=$2 local LOC_UE_IP_ADDR=$2
local LOC_UE_IP_ADDR=$3 local LOC_ENB_IP_ADDR=$3
local LOC_LOG_FILE=$4 local LOC_LOG_FILE=$4
local LOC_NB_RBS=$5 local LOC_NB_RBS=$5
local LOC_CONF_FILE=$6 local LOC_CONF_FILE=$6
...@@ -366,21 +390,27 @@ function start_nos1_sim_ue { ...@@ -366,21 +390,27 @@ function start_nos1_sim_ue {
echo "source oaienv" >> $1 echo "source oaienv" >> $1
echo "cd ci-scripts/conf_files/" >> $1 echo "cd ci-scripts/conf_files/" >> $1
echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1 echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
echo "sed -i -e 's#CI_UE_IP_ADDR#$LOC_UE_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1 echo "sed -i -e 's#CI_UE_IP_ADDR#$LOC_UE_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_ENB_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/tools\"" >> $1 echo "echo \"cd /home/ubuntu/tmp/cmake_targets/tools\"" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/tools/" >> $1 echo "cd /home/ubuntu/tmp/cmake_targets/tools/" >> $1
echo "echo \"if [ \`lsmod | grep -c nasmesh\` -eq 0 ]; then sudo -E ./init_nas_nos1 UE; fi\"" >> $1 echo "echo \"if [ \`lsmod | grep -c nasmesh\` -eq 0 ]; then sudo -E ./init_nas_nos1 UE; fi\"" >> $1
echo "if [ \`lsmod | grep -c nasmesh\` -eq 0 ]; then sudo -E ./init_nas_nos1 UE; fi" >> $1 echo "if [ \`lsmod | grep -c nasmesh\` -eq 0 ]; then sudo -E ./init_nas_nos1 UE; fi" >> $1
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_noS1_build_oai/build/\"" >> $1 echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_noS1_build_oai/build/\"" >> $1
echo "cd /home/ubuntu/tmp/cmake_targets/lte_noS1_build_oai/build/" >> $1 echo "cd /home/ubuntu/tmp/cmake_targets/lte_noS1_build_oai/build/" >> $1
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem-nos1 -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE -r $LOC_NB_RBS --siml1\" | sudo tee -a ./my-lte-uesoftmodem-run.sh " >> $1 echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem-nos1 -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE -r $LOC_NB_RBS --siml1\" | sudo tee ./my-lte-uesoftmodem-run.sh " >> $1
echo "sudo chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1 echo "sudo chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
echo "cat ./my-lte-uesoftmodem-run.sh" >> $1 # echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
# echo "BEGIN start_nos1_sim_ue command"
# cat $1
# echo "END start_nos1_sim_ue command"
echo "sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" >> $1
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_noS1_build_oai/build -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1 echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_noS1_build_oai/build -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$LOC_UE_IP_ADDR < $1 ssh -o StrictHostKeyChecking=no ubuntu@$LOC_UE_IP_ADDR < $1
sleep 10 echo " ========================================================"
sleep 40
rm $1 rm $1
echo " ========================================================"
# marker is "Generating RRCConnectionReconfigurationComplete"
} }
function stop_nos1_sim_ue { function stop_nos1_sim_ue {
...@@ -399,7 +429,6 @@ function stop_nos1_sim_ue { ...@@ -399,7 +429,6 @@ function stop_nos1_sim_ue {
echo "sleep 1" >> $1 echo "sleep 1" >> $1
echo "echo \"ps -aux | grep softmodem\"" >> $1 echo "echo \"ps -aux | grep softmodem\"" >> $1
echo "ps -aux | grep softmodem | grep -v grep" >> $1 echo "ps -aux | grep softmodem | grep -v grep" >> $1
ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1 ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
rm -f $1 rm -f $1
} }
...@@ -1462,11 +1491,24 @@ function run_test_on_vm { ...@@ -1462,11 +1491,24 @@ function run_test_on_vm {
fi fi
mkdir --parents $ARCHIVES_LOC mkdir --parents $ARCHIVES_LOC
ENB_VM_NAME=$VM_NAME
ENB_VM_CMDS=${ENB_VM_NAME}_cmds.txt
echo "ENB_VM_NAME = $ENB_VM_NAME"
echo "ENB_VM_CMD_FILE = $ENB_VM_CMDS"
UE_VM_NAME=`echo $VM_NAME | sed -e "s#enb#ue#"` UE_VM_NAME=`echo $VM_NAME | sed -e "s#enb#ue#"`
UE_VM_CMDS=${UE_VM_NAME}_cmds.txt UE_VM_CMDS=${UE_VM_NAME}_cmds.txt
echo "UE_VM_NAME = $UE_VM_NAME" echo "UE_VM_NAME = $UE_VM_NAME"
echo "UE_VM_CMD_FILE = $UE_VM_CMDS" echo "UE_VM_CMD_FILE = $UE_VM_CMDS"
echo "############################################################"
echo "Waiting for ENB VM to be started"
echo "############################################################"
uvt-kvm wait $ENB_VM_NAME --insecure
ENB_VM_IP_ADDR=`uvt-kvm ip $ENB_VM_NAME`
echo "$ENB_VM_NAME has for IP addr = $ENB_VM_IP_ADDR"
echo "############################################################" echo "############################################################"
echo "Waiting for UE VM to be started" echo "Waiting for UE VM to be started"
echo "############################################################" echo "############################################################"
...@@ -1479,13 +1521,37 @@ function run_test_on_vm { ...@@ -1479,13 +1521,37 @@ function run_test_on_vm {
echo "Starting the eNB in FDD-5MHz mode" echo "Starting the eNB in FDD-5MHz mode"
echo "############################################################" echo "############################################################"
CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log
start_nos1_sim_enb $VM_CMDS $VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 5 rcc.band7.nos1.simulator.conf echo "ENB_VM_CMDS = $ENB_VM_CMDS"
echo "ENB_VM_IP_ADDR = $ENB_VM_IP_ADDR"
echo "UE_VM_IP_ADDR = $UE_VM_IP_ADDR"
echo "CURRENT_ENB_LOG_FILE = $CURRENT_ENB_LOG_FILE"
start_nos1_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.nos1.simulator.conf
echo "############################################################" echo "############################################################"
echo "Starting the UE in FDD-5MHz mode" echo "Starting the UE in FDD-5MHz mode"
echo "############################################################" echo "############################################################"
CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log
start_nos1_sim_ue $UE_VM_CMDS $VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_UE_LOG_FILE 5 rru.band7.nos1.simulator.conf start_nos1_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 rru.band7.nos1.simulator.conf
echo "UE_SYNC = $UE_SYNC"
echo "ifconfig oai0 | egrep \"inet addr\" | sed -e 's#^.*addr:##' -e 's# Bcast.*##'" > $UE_VM_CMDS
UE_REAL_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR < $UE_VM_CMDS`
echo "UE oai0 interface IP addr: $UE_REAL_IP_ADDR"
echo "############################################################"
echo "Pinging the UE from eNB"
echo "############################################################"
PING_LOG_FILE=fdd_05MHz_ping_ue.txt
echo "UE_VM_CMDS = $UE_VM_CMDS"
echo "UE_VM_IP_ADDR = $UE_VM_IP_ADDR"
echo "UE_IP_ADDR = $UE_IP_ADDR"
echo "PING_LOG_FILE = $PING_LOG_FILE"
ping_no_s1_ue_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_REAL_IP_ADDR $PING_LOG_FILE
#ping_ue_ip_addr $UE_CMDS $UE_VM_IP_ADDR $REAL_UE_IP_ADDR $PING_LOG_FILE
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
echo "############################################################"
echo "END OF Pinging the UE from eNB"
echo "############################################################"
sleep 30 sleep 30
echo "############################################################" echo "############################################################"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment