bugfixes for eNB on usrp, some minor fixes for eMTC

openair1/PHY/CODING/lte_rate_matching.c

@@ -514,7 +514,8 @@ uint32_t lte_rate_matching_turbo(uint32_t RTC,
   if (Ncb>(3*(RTC<<5)))
     AssertFatal(1==0,"Exiting, RM condition (Ncb %d, RTC %d, Nir/C %d, Nsoft %d, Kw %d)\n",Ncb,RTC,Nir/C,Nsoft,3*(RTC<<5));
   
-
+  AssertFatal(Nl>0,"Nl is 0\n");
+  AssertFatal(Qm>0,"Qm is 0\n");
   Gp = G/Nl/Qm;
   GpmodC = Gp%C;
 
@@ -720,6 +721,8 @@ int lte_rate_matching_turbo_rx(uint32_t RTC,
     Ncb = 3*(RTC<<5);
   }
 
+  AssertFatal(Nl>0,"Nl is 0\n");
+  AssertFatal(Qm>0,"Qm is 0\n");
   Gp = G/Nl/Qm;
   GpmodC = Gp%C;
 

openair1/PHY/CODING/lte_segmentation.c

@@ -123,6 +123,9 @@ int lte_segmentation(unsigned char *input_buffer,
   }
 
 
+  AssertFatal(Bprime <= (*Cplus)*(*Kplus) + (*Cminus)*(*Kminus),
+	      "Bprime %d <  (*Cplus %d)*(*Kplus %d) + (*Cminus %d)*(*Kminus %d)\n",
+	      Bprime,*Cplus,*Kplus,*Cminus,*Kminus);
 
   *F = ((*Cplus)*(*Kplus) + (*Cminus)*(*Kminus) - (Bprime));
 #ifdef DEBUG_SEGMENTATION

openair1/SCHED/phy_procedures_lte_eNb.c

@@ -1018,7 +1018,7 @@ handle_nfapi_dlsch_pdu(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,
   else                     dlsch1_harq->pdu                    = sdu;
 
 #ifdef Rel14
-  if ((rel13->pdsch_payload_type == 0) && (rel13->ue_type>0)) { // this is a BR/CE UE and SIB1-BR
+  if ((rel13->pdsch_payload_type <2) && (rel13->ue_type>0)) { // this is a BR/CE UE and SIB1-BR/SI-BR
     // configure PDSCH
     switch (eNB->frame_parms.N_RB_DL) {
     case 6:
@@ -1048,13 +1048,13 @@ handle_nfapi_dlsch_pdu(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,
 
     dlsch0_harq->nb_rb              = 6;
     dlsch0_harq->vrb_type           = LOCALIZED;
-    dlsch0_harq->rvidx              = 0;
-    dlsch0_harq->Nl                 = 0;
+    dlsch0_harq->rvidx              = rel8->redundancy_version;
+    dlsch0_harq->Nl                 = 1;
     dlsch0_harq->mimo_mode          = (eNB->frame_parms.nb_antenna_ports_eNB == 1) ? SISO : ALAMOUTI;
     dlsch0_harq->dl_power_off       = 1;
     dlsch0_harq->round              = 0;
     dlsch0_harq->status             = ACTIVE;
-    dlsch0_harq->TBS                = rel8->length;
+    dlsch0_harq->TBS                = rel8->length<<3;
 
 
 

openair2/ENB_APP/enb_config.c

@@ -503,7 +503,8 @@ void RCconfig_RU() {
 	
 
 	if (  !(
-                config_setting_lookup_int(setting_ru, CONFIG_STRING_RU_MAX_RS_EPRE, &max_pdschReferenceSignalPower)
+                config_setting_lookup_int(setting_ru, CONFIG_STRING_RU_MAX_RS_EPRE, &max_pdschReferenceSignalPower) &&
+                config_setting_lookup_int(setting_ru, CONFIG_STRING_RU_MAX_RXGAIN, &max_rxgain)
                )
               ) {
           AssertFatal (0,

openair2/RRC/LITE/L2_interface.c

@@ -304,6 +304,24 @@ mac_rrc_data_req(
     }
 
 #endif //Rel10 || Rel14
+
+#ifdef Rel14
+    if ((Srb_id & RAB_OFFSET) == BCCH_SIB1_BR){
+        memcpy(&buffer_pP[0],
+               RC.rrc[Mod_idP]->carrier[CC_id].SIB1_BR,
+               RC.rrc[Mod_idP]->carrier[CC_id].sizeof_SIB1_BR);
+        return (RC.rrc[Mod_idP]->carrier[CC_id].sizeof_SIB1_BR);
+    }
+
+    if ((Srb_id & RAB_OFFSET) == BCCH_SI_BR){ // First SI message with SIB2/3
+        memcpy(&buffer_pP[0],
+               RC.rrc[Mod_idP]->carrier[CC_id].SIB23_BR,
+               RC.rrc[Mod_idP]->carrier[CC_id].sizeof_SIB23_BR);
+        return (RC.rrc[Mod_idP]->carrier[CC_id].sizeof_SIB23_BR);
+    }
+
+#endif
+
   } else {  //This is an UE
 
 

targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp

@@ -341,8 +341,8 @@ int trx_usrp_set_gains(openair0_device* device,
                        openair0_config_t *openair0_cfg) {
 
     usrp_state_t *s = (usrp_state_t*)device->priv;
-
-    s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
+    ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(0);
+    s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[0]);
     ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
     // limit to maximum gain
     if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
@@ -641,11 +641,13 @@ extern "C" {
                       openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
             }
         }
+
         for(int i=0; i<s->usrp->get_tx_num_channels(); i++) {
+	  ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(i);
             if (i<openair0_cfg[0].tx_num_channels) {
                 s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
                 s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
-                s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
+                s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[i],i);
             }
         }
 

targets/RT/USER/lte-ru.c

@@ -1638,7 +1638,7 @@ void fill_rf_config(RU_t *ru,const char *rf_config_file) {
     cfg->rx_freq[i] = (double)fp->ul_CarrierFreq;
 
     cfg->tx_gain[i] = (double)fp->att_tx;
-    cfg->rx_gain[i] = (double)fp->att_rx;
+    cfg->rx_gain[i] = ru->max_rxgain-(double)fp->att_rx;
 
     cfg->configFilename = rf_config_file;
     printf("channel %d, Setting tx_gain offset %f, rx_gain offset %f, tx_freq %f, rx_freq %f\n",